Supports screw-terminal UTP video inputs. Built-in transient protection & ground lifting. Three-position distance range switch. Mono or colour non-amplified video receiver up to 2.4km with Cat-5 wire to be used with NV-652R, NV-852R, or NV-1662R receivers. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Up to 10 NV-653Ts may be rack mounted using the NV-RM8/10 Rack Panel Kit.
Make | NVT Phybridge |
---|---|
Manufacturer | NVT Phybridge |
Model code | NV-653T |
Transmission type | UTP / CAT 5 transmission |
Video Inputs | 1 channels |
TX/RX | TX |
Telemetry Control | Yes |
Pre & Post Alarm Image Buffer | Yes |
Video Outputs | 1 |
Transmission Range m | 1,600 |
Physical Specifications |
Weight g: 100 Dimensions mm: 76 x 39 x 28 |
Electrical Specifications | Voltage: 24 V AC, 24 V DC |
Environmental Specifications | Operating Temp oC: 0 ~ 50 |
Additional info | Supports screw-terminal UTP video inputs. Built-in transient protection & ground lifting. Three-position distance range switch. Mono or colour non-amplified video receiver up to 2.4km with Cat-5 wire to be used with NV-652R, NV-852R, or NV-1662R receivers. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Up to 10 NV-653Ts may be rack mounted using the NV-RM8/10 Rack Panel Kit. |