Mono or colour non-amplified video receiver up to 2.4 km with Cat-5 wire to be used with NVT NV-213A/A-M Video Transceiver or NV-653T Video Transmitter. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Up to 10 NV-652 Rs may be rack mounted using the NV-RM8/10 Rack Panel Kit. Supports screw-terminal UTP video inputs. Distances up to 3000 ft with passive transceiver.
| Make | NVT Phybridge |
|---|---|
| Manufacturer | NVT Phybridge |
| Model code | NV-652R |
| Transmission type | UTP / CAT 5 transmission |
| Video Inputs | 1 channels |
| TX/RX | RX |
| Telemetry Control | Yes |
| Pre & Post Alarm Image Buffer | Yes |
| Video Outputs | 1 |
| Transmission Range m | 300 |
| Physical Specifications |
Weight g: 100 Dimensions mm: 76 x 39 x 28 |
| Environmental Specifications | Operating Temp oC: 0 ~ 50 |
| Additional info | Mono or colour non-amplified video receiver up to 2.4 km with Cat-5 wire to be used with NVT NV-213A/A-M Video Transceiver or NV-653T Video Transmitter. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Up to 10 NV-652 Rs may be rack mounted using the NV-RM8/10 Rack Panel Kit. Supports screw-terminal UTP video inputs. Distances up to 3000 ft with passive transceiver. |