The NVT Model NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Features a 9 inch mini-coax pigtail w/Male BNC. Built-in transient protection. Supports "up-the-coax" type control signal up to 750 ft. Transmit up to 750 ft, 3000 ft with an active receiver.
| Make | NVT Phybridge |
|---|---|
| Manufacturer | NVT Phybridge |
| Model code | NV-214A-M |
| Transmission type | UTP / CAT 5 transmission |
| Video Inputs | 1 channels |
| TX/RX | TX/RX |
| Telemetry Control | Yes |
| Pre & Post Alarm Image Buffer | Yes |
| Video Outputs | 1 |
| Transmission Range m | 225 |
| Physical Specifications |
Weight g: 60 Dimensions mm: 45 x 26 x 228 |
| Environmental Specifications |
Operating Temp oC: -30 ~ +75 Operating Humidity %: 0 ~ 95 |
| Additional info | The NVT Model NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Features a 9 inch mini-coax pigtail w/Male BNC. Built-in transient protection. Supports "up-the-coax" type control signal up to 750 ft. Transmit up to 750 ft, 3000 ft with an active receiver. |