The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
| Make | FLIR Systems |
|---|---|
| Manufacturer | FLIR Systems |
| Model code | 617 |
| Series | FLIR FH-Series R |
| Colour Type | Colour / Monochrome |
| Resolution | 640 × 512 thermal resolution |
| Specialist Type | Thermal |
| Sensitivity Lux | Color: 0.25 Lux (@ (f1.6 AGC On, 30 fps) / B/W: 0.10 Lux (@ (f1.6 AGC On, 30 fps) |
| Electrical Specifications |
Voltage: 12 V DC / 24 V DC / 24 V AC Power Consumption: Nominal: 15 W / Heaters enabled, 12 VDC: 48 W / Heaters enabled, all other inputs: 70 W |
| Focal Length mm | 35 mm |
| Network Properties |
Image Frame Rate: 30 fps Interface: 100/1000 Mbps Ethernet Network Protocols: IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X |
| Compression Type | Two independent channels of H.264/H.265 or M-JPEG (except 4K) for visible and thermal |
| Environmental Specifications |
Protection: IP66, IP67 Operating Temperature oC: -40 ~ +70 C (-40 ~ +158 F) Operating Humidity %: 0 ~ 95 |
| Additional info |
|