NVD2910 from Genie can connect to cameras from anywhere and also has free client software. It also has manual and motion detection recording. Additionally, it has web managed password protection.
| Make | Genie CCTV Limited |
|---|---|
| Manufacturer | Genie Access Ltd. |
| Model code | NVD2910 |
| Chip Inch Size | 1/3 inch |
| Resolution TVL | 420 |
| Dome Type | Static |
| Sensitivity lux | 0.5 |
| Indoor/Outdoor | Outdoor |
| Electrical Specifications |
Voltage: 12 V DC Power Consumption: 5.4W |
| Focal length | 2.9 ~ 10 |
| Compression | MPEG-4 |
| Back Light Compensation | Yes |
| Auto Gain Control | Yes |
| White Balance | Yes |
| Electronic Shutter range | 1/50 ~ 1/100,000 |
| S/ N (Signal/ Noise) Ratio dB | >48 |
| Synchronisation | Internal |
| Signal Mode | PAL / NTSC |
| Video Output | 1 Vpp 75 Ohm |
| Network Properties |
Interface: Ethernet 10/100 Base-T / 100 Base TX Auto MDIX RJ- Network Protocols: IPv4 / HTTP /TCP / ICNP / RTSP / RTP / UDP / IGMP / RTCP / SMTP / FTP / DHCP / UPnP / ARP / DNS / PPPoE |
| Physical Specifications |
Dimensions mm: 159 x 130 x 62 Weight g: 1600 |
| Environmental Specifications |
Operating Temp oC: -10 ~ +60 Operating Humidity %: 30 ~ 80 Protection: IP66 |
| System Requirements |
Operating System: Microsoft Windows XP SP2 or Above Framework 2.0 Hardware and System related properties: Pentium 4CPU 1.0 GHz or Higher DRAM 512 MB or High |
| Additional info |
NVD2910 from Genie can connect to cameras from anywhere and also has free client software. It also has manual and motion detection recording. Additionally, it has web managed password protection. |