CCTV Video Signal Devices and Distribution Amplifiers(229)
System OverviewWith upgraded H.265 encoding technology, Dahua Lite series network camera has efficient video encoding capacity, which saves bandwidth and storage space. This camera adopts the latest starlight technology and displays better color image in the condition of low illumination. It supports SD card storage, dust-proof function, waterproof function and vandal-proof function, complying to the standards of IP67 and IK10 (Supported by some select models). Functions Smart CodecWith advanced scene-adaptive rate control algorithm, Dahua smart encoding technology realizes the higher encoding efficiency than H.265 and H.264, provides high-quality video, and reduces the cost of storage and transmission. WDRWith advanced Wide Dynamic Range (WDR) technology, Dahua network camera provides clear details in the environment of strong brightness contrast. The bright and dark area can get clear video even in high brightness environment or with backlight shadow. StarlightDahua Starlight technology mainly applies to the environment of low illuminance, and it can provide clear colorful video. Even in the environment of ultra-low illuminance, the technology can guarantee the good image effect. IVSWith advanced video algorithm, Dahua IVS technology supports intelligent functions, such as tripwire and intrusion. Protection (IP67, IK10, wide voltage)IP67: The camera passes a series of strict test on dust and soak. It has dust-proof function, and the enclosure can works normal after soaking in 1 m deep water for 30 minutes.IK10: The enclosure can stand the punch more than 5 times from a 5 kg hammer falling from a height of 40 cm (Impact energy is 20J).Wide voltage: The camera allows ±30% input voltage tolerance (wide voltage range), and it is widely applied to outdoor environment with instable voltage.
Hanwha Techwin’s Wisenet PNM-9000VD multi-sensor/multi-directional camera provides quality images and modular lens configuration at an affordable price. This camera supports 30fps image capture and true 120 dB WDR without compromising frame rate for each of its two 5MP sensors. Each sensor has its own Wisenet 5 chip, providing a full suite of built-in video analytics including loitering, directional detection, fog detection, tampering, motion detection and objects entering or exiting an area.
VIVOTEK’s VAST 2 is an easy to use IP video management software (VMS). To meet the real-world needs of users, it comes with exciting advancements such as easy operation on single or multiple monitors, custom layout to accommodate both corridor and panorama orientations, rapid export of multi-channel video and the acquisition of VCA analytics & cybersecurity attack events from VIVOTEK cameras and substations (such as NVRs) in a hierarchical system structure. In the new version update of VIVOTEK’s video management software VAST 2, several advanced user-centered functionalities will be unveiled. The new features include the Deep-Learning Technology Smart Search II, Cybersecurity Management Solution, and License Plate Recognition Integration. With this update, users can enjoy the intuitive interface of VAST 2 while achieving a higher level of management efficiency. Three new user-oriented benefits will be highlighted in VAST 2： Smart Search II Building on Deep-Learning Video Content Analytics, the Smart Search II of VAST 2 allows users to quickly search for specific objects and people in the specified region. While enabling People Detection feature, only people-based activities will serve as event triggers. The security operator no longer needs to search through extensive footage for critical videos, thus improving both efficiency and effectiveness. Cybersecurity Management Solution Offering the complete end-to-end cybersecurity protection, the new VAST 2 is fully integrated with VIVOTEK cameras and NVRs and becomes a powerful cybersecurity central management site. The protection includes Instant Alert Notifications, allowing users to receive notifications automatically, and the Cyber Risk Dashboard to visually identify common types of cyber-attacks. In addition, users can filter attack logs according to a range of criteria, making it quicker to find abnormal events and take necessary actions to minimize risks. License Plate Recognition Integration Now, the new VAST 2 is fully integrated with VIVOTEK’s LPR/ Automatic Number-Plate Recognition (ANPR) camera, IB9387-LPR. Users can see the live images with selected information, such as confidence level or black list status, which can in turn become a trigger source in Alarm Management, making it easy to intelligently manage license plate data.
IDIS has extended its award-winning DirectIP® camera range with the introduction of a new flagship 2MP 36x Lightmaster IR PTZ outdoor-ready camera for fast and precise pan/tilt/zoom performance.The new DC-S6283HRX Lightmaster builds on the specification of IDIS’s successful PTZ models, with a high-grade lens combined with advanced sensor technology and finely tuned, client-side image processing, allowing the capture of vivid, true colour video in extremely low light conditions. Excellent performance at long distances, with minimum motion blur, makes the DC-S6283HRX ideal for perimeters, shopping centres, stadia, outdoor spaces and public area applications.The camera benefits from IDIS’ signature true plug-and-play, one-click configuration and features 36x optical zoom, IR up to 350 metres, true wide dynamic range (WDR), digital image stabilization (DIS), a built-in heater and a vandal proof casing.“Designed for 24/7 accurate pan/tilt/zoom operation this new Lightmaster PTZ camera delivers unparalleled performance and exceptional detail when zooming. The camera is equipped with a variety of intelligent features and can move between pre-set positions and zoom in automatically in response to detected events. The result is maximum protection for a wide range of applications,” said James Min, Managing Director, IDIS Europe.The user experience is enhanced with IDIS Smart UX Controls, which is an award-winning, advanced and simple to use interface featuring intuitive slingshot and rubber-band style controls. Operators can smoothly and seamlessly follow moving objects in real-time with ground-breaking accuracy by panning images at different speeds and in different directions - literally without lifting a finger - by using a CTRL button and mouse combination.The camera uses H.264 and H.265 combined with IDIS Intelligent Codec to deliver significant bandwidth and storage savings and benefits from low Power over Ethernet (PoE) energy consumption.The risk of gaps in footage is eliminated with IDIS Smart Failover. In the event of network instability, the camera automatically records to an integral 256GB SD card and transfers data to the network video recorder (NVR) once connection is restored, which avoids the need for engineer call outs to retrieve footage.“We are listening and responding to customer demand with our new 2MP PTZ Lightmaster camera, providing an easy to deploy, low-storage and bandwidth solution for wide area coverage and perimeter detection,” said James Min, Managing Director of IDIS Europe. “It’s particularly suited to town centre and city surveillance, stadia, outdoor retail parks, manufacturing and logistics sites and high-security perimeter applications where outstanding performance and ease-of-use combined with a low total cost of ownership are becoming essential.”
Increase safety and reduce risk on board your transit vehicles with March Networks® RideSafe MT Series IP Recorders. These all-IP units deliver highly-reliable video surveillance recording and management in a compact, rugged design that is ideal for mid-sized vehicles – like student and patient shuttles and paratransit buses. Available in 4-channel and 6-channel models, the RideSafe MT Series solution enables operators to capture everything that’s happening on the bus, inside and out. Whether you have one or a thousand vehicles, this plug-and-play recorder can operate as a standalone unit programmable through embedded software, or be remotely managed and monitored daily using March Networks Command™ for Transit video management software. Video from the recorder can also be integrated with existing CAD and AVL systems and mobile routers. Key RideSafe MT Series features include: Front panel LEDs for easy recorder diagnostics, including operational, recording and video export status Embedded Linux OS, to ensure reliable and secure video recording Real-time health monitoring, alerting operators to camera, recorder and network issues before they affect performance Vehicle metadata integration from CAD/AVL systems and accelerometers for accurate re-enactments, driver monitoring and investigations Configurable recording policies based on schedule, motion, incident/event and other user-definable variables Powerful video management software, providing the advanced tools and features needed to manage entire fleets Automated video and data extraction over WiFi or 4G networks Extended thermal range (ETR) models available
AI series products adopt the most advanced AI technologies, including deep learning algorithms that primarily target people and vehicles, which provides higher flexibility and accuracy for end-users. This enables the Dahua AI series to offer various advanced applications such as Face Recognition, Metadata, traffic data statistics, etc. The complete lineup of Dahua AI includes network (PTZ) cameras, network video recorders, servers, and more devices. Beyond seeing the world, the power of AI allows devices to perceive the environment and understand the world in a better way. System Overview Dahua PTZ AI network camera adopts advanced CNN deep learning algorithms to support face recognition with high accuracy. The Dual 4MP Starlight Smart Capture Camera consists of panoramic camera and PTZ camera. Panoramic camera captures panoramas, and then PTZ camera takes detailed snapshots of objects and keeps tracking objects after rule violations occur. This camera possess wide monitor range and PFA algorithm that can always present a clear, focused image while zooming. Functions Dual PTZ systemPanoramic camera and Detail camera of the dual PTZ system can be adjusted horizontally and vertically. Face RecognitionOnce facial features are extracted from captured faces, they are stored in a database where they can be easily searched and compared against other images. Once a successful match is found, the system outputs the result. The Dahua Face Recognition camera supports a built-in database that stores up to 10,000 facial images, helping the camera achieve realtime face capture and comparison. Starlight TechnologyFor challenging low-light applications, Dahua's Starlight Ultra-low Light Technology offers best-in-class light sensitivity, capturing color details in low light down to 0.001 lux. The camera uses a set of optical features to balance light throughout the scene, resulting in clear images in dark environments. PFA TechnologyPFA technology has innovatively introduced new methods of judgment to ensure the accuracy and predictability of the direction of subject distance adjustment. The result is a set of advanced focusing algorithms. PFA ensures clarity of the image throughout the process of zooming and shortens focus time. The realization of PFA technology substantially improves user experience and increases product value. MetadataMetadata is feature attribute information extracted from a target object which can be used for data retrieval. There are four kinds of metadata supported by Dahua PTZ AI camera: human face, human body, motor vehicle and non-motor vehicle metadata. Facial information includes gender, age, glasses, masks, beards, etc. Human body information includes hat, top, top color, bottom, bottom color, bag, etc. Motor vehicle information includes plate color, type, vehicle color, sunshield, ornament, calling, seatbelt, smoking, annual inspection sticker, etc. Non-motor vehicle information includes type, color, top type, top color, people number, etc. Smart trackingHuman, motor vehicle, and non-motor vehicle, or their combinations can be set as objects. Once the objects selected trigger detection rules (like tripwire and intrusion), the detail camera will track them automatically. Perimeter ProtectionAutomatically filtering out false alarms caused by animals, rustling leaves, bright lights, etc. Enables system to act secondary recognition for the targets. Improving alarm accuracy. InteroperabilityThe camera conforms to the ONVIF (Open Network Video Interface Forum) specifications, ensuring interoperability between network video products regardless of manufacturer.
VIVOTEK ‘s new CC9381-HV is a 180-degress panoramic network camera, featuring its compact design and high-quality image capability, making it suitable for a wide array of both indoor and outdoor environments, such as boutiques, convenience stores, banks, schools and homes. Along with offering amazing 180° HFOV coverage, CC9381-HV offers up to 20 fps at 5-Megapixel resolution (30 fps at 5MP with WDR Off). This Panoramic Network Camera also incorporates other value-added features.With IR built-in 180° IR illuminators up to 15 meters, no matter day or night, light or dark, the new CC9381-HV always provides complete video security. Further, due to the SNV technology, areas of low light visibility are no longer an issue either. Equipped with WDR Pro technology, the CC9381-HV enable the camera to maintain optimal image quality and unparalleled visibility in high contrast lighting environments, as well as combined both H.265 and VIVOTEK Smart Stream III, it can reduce bandwidth and storage consumption more than 90% compared to traditional H.264 without smart streaming. In addition to its versatile coverage and features, the CC9381-HV is safeguarded by Trend Micro IoT Security to provide users with higher levels of network protection.
Consider your security needs met. The experts in thermal and perimeter security have packed everything you need into one affordable, easy-to-install camera. The FLIR Saros DH-390 Dome Camera includes IR and visible illuminators, plus Lepton thermal sensors to allow you to see in any condition. And with high-resolution video, you’ll never miss a thing.
The Contera NVR Appliance from Arecont Vision Costar is designed to offer powerful IP recording in an affordable, compact chassis. The Contera NVR Appliance is equipped with an on-board 8 or 16 channel PoE switch, that can be upgraded to 24 channels, allowing for Plug and Play connection with ConteraWS® or ONVIF cameras. With full integration to Contera Web Services, the Contera NVR Appliance offers centralised user management, single sign-on convenience, mobile apps and a web client that allows for easy remote connection to your recorders. Network setup is fast and easy using Contera Web Services, and eliminates the need for port forwarding or DDNS. The Contera NVR Appliance runs on a secure Linux OS and comes preloaded with ConteraVMS® Server software as a turnkey solution.
The Evolution Stainless Steel cameras, part of Oncam’s Specialist Camera Range, are unique to the 360-degree video surveillance market as they are the only ones certified for tough environments, indoor and outdoor. The 05MP and 12MP versions have been specifically designed to meet the needs of customers operating in demanding environments such as Food Processing, Industrial, Maritime and Ports and Safe City applications. The cameras’ resilient Stainless Steel 316 housing is manufactured for enhanced corrosion resistance. The IP66, IP67, IP68, IP69K, and NEMA 4X and 6P ratings make the enclosure fit for harsh environments, while its IK10+ rating makes it resistant to impacts of 40 joules. The NSF certification and HCV EU mark make the camera range unique, guaranteeing compliance with standards for commercial food equipment in both North America as well as Europe. The only 360-degree fisheye camera in a stainless steel housing, Oncam’s new and improved camera range is available for surface and pendant mount installations. A matching stainless steel arm allows for wall, corner and pole mounting. Evolution 05 Stainless Steel: EVO-05-SS2 Evolution 12 Stainless Steel: EVO-12-SS2
Hikvision has launched a new Fisheye IP camera series (DS-2CD63X5G0) with AI. This 360˚ panoramic camera uses the deep learning technology to deliver a more accurate heat map functionality. It gives an enhanced view of its surroundings – and is especially useful in large retail applications. The cameras’ 360˚ panoramic image of the scene before it, means the user can see a wider area much more clearly. This is enhanced by independent control of a three-way infrared light, which can be separately configured to reduce the amount of ‘reflective’ wall space. This improves image quality, especially when placed in a corner location. The deep learning algorithm focuses only on human targets, improving the accuracy of the heat map functionality. This means users can see ‘hotspots’ in a space, showing areas that people visit, or pass, the most. An added layer to the heat map visualisation makes it a lot clearer than previous technologies, presenting more information in a clearer way. Despite the high quality of the images, the cameras boast extremely light bandwidth, saving storage and costs by using H265+ compression technology. They also support Multiple Expansion Modes, with up to 15 live view display modes available, designed for three different mounts. This means they can be more easily adjusted to meet the users’ exact preferences, and improve their browsing experience. Other features include: New Immervision lens (only 12MP, 1.29mm lens model) Up to 12MP resolution 120 dB WDR Up to 15m IR range Built-in microphone and speaker Smart features: 6 behaviour analyses, and 3 exception detections IK10/IP66 available. The cameras will be a useful addition to retail solutions, with heat mapping helping owners to understand customers’ psychology and identify which products attract the most attention on the shop floor. They can also be used in other large area applications, like train stations and public squares. The series will also be a boon to installers, with the ability to achieve monitoring which has no ‘dead angles’, making the solution more efficient and reducing installation costs. “We pride ourselves on continually advancing our technology and how it is implemented”, says Peter Guan, Director of Channel Sales and Marketing for Hikvision Europe. “This new Fisheye camera will provide clear flow information that will help users to make the right business decisions to make their spaces much more profitable.”
The Evolution 180 Indoor camera is built upon Oncam’s expertise and heritage on 360-degree technology. It’s been specifically designed for applications that require a dewarped panoramic view of a scene, without blind spots, from a single sensor camera. The 5:2 Panoramic+ stream provides a perfect balance between image quality and bandwidth efficiency. In addition, when mounting on an angle, Oncam’s Angle Compensation Technology (ACT) corrects the view, straightening vertical lines in the scene. The true day/night functionality allows images to be produced in all lighting conditions, including additional IR lighting. The camera is provided with three different mounting back boxes (0°, 25° and 45°), which also double up as pendant mount. EVO-180-WID (White) / EVO-180-WJD (Black)
Z3 Smart Camera Home Security System is the ideal solution for the small to mid-size home owner who is looking for a comprehensive smart home security system with boundless expandability. With so many sensors and accessories out in the market, how can a user find what they need to start off with? The multifunctional Z3 Smart Camera Security System provides an all-in-one solution with built-in basics, including 1080p HD Camera, PIR motion, temperature, humidity, and ambient lux light sensors, and two-way clear voice intercom system with echo cancellation feature. Z3 is compatible with RF, ZigBee and Z-Wave accessories, supporting up to 160 wireless sensors, to create endless possibilities to help users to create comprehensive smart home security. Add on voice prompt, loud siren, and backup battery, Z3 makes it possible to provide comprehensive smart home security services, including remote management, home security, live visual monitoring, home automation, energy management and emergency monitoring, designed to bring all-around convenience, comfort and safety. Z3 brings a complete and cost-effective smart home solution for users to experience a secure, and comfortable lifestyle. Features Communication Path: IP (Ethernet), WiFi, 3G/4G Built-in Protocol Options: RF, ZigBee, Z-Wave Two area configurations, supports up to 160 zones Alarm event reporting via CID/SIA Email / SMS /Push Notification via Cloud Server Camera: 1920x1080p high-resolution with 152° diagonal wide-angle lens Temperature Sensor: detects temperature from -10°C~ 50°C (14°F~ 122°F) Humidity Sensor: humidity range 0 ~ 100%RH PIR Motion Sensor: 7m range @ 100° degrees Ambient Light Sensor: detects light lux levels Home Security capabilities Security Visual Verification and Real-time Monitoring & Reporting ZigBee and Z-Wave based home automation capabilities Energy Management capabilities 24/7 Environment Emergency Monitoring Built-in siren, voice prompt, microSD slot Remote management via Smartphone App and Web browser Specifications ZigBee Protocol: ZigBee Pro HA 1.2, 2.4GHz Z-Wave Protocol: Z-Wave 868.40MHz (EU) / 908.40MHz (US) RF Frequencies: 433 MHz / 868MHz Wi-Fi Module: 802.11 b/g/ n 4G Frequencies: 2100 / 2600 / 1900 / 1800 / 900 / 850 / 700MHz Power Supply: 12V/2A, 100~240VAC Backup Battery: 7.2V, 1600mA NiMh rechargeable battery pack Backup Battery Life: 15 hours* Siren: 95dB @ 1m Memory Card Slot: MicroSD card Operating Temperature: -10° to 45°C (14°F to 113°F) Operating Humidity: Up to 85% non-condensing
VIVOTEK ‘s new MA9322-EHTV is a multi-sensor adjustable dome network camera. Featuring four independent 5MP CMOS Sensors with IR illuminators, the MA9322-EHTV allows users to simultaneously view four different areas while occupying only a single IP address, making this camera ideally suited for surveillance in areas such as hallway intersections, building corners, parking garages/lots, and shopping malls. It reduces the total number of cameras needed for surveillance, helping to lower total installation time and costs. By adding IR illumination up to 30 meters, no matter day or night, light or dark, the new MA9321-EHTV always provides complete video security. Further, due to the SNV technology, areas of low light visibility are no longer an issue either. The MA9322-EHTV is equipped with a removable IR-cut filter and WDR Pro technology, enabling the camera to maintain optimal image quality and unparalleled visibility in high contrast lighting environments, as well as combined both H.265 and VIVOTEK Smart Stream III, the MA9322-EHTV can reduce bandwidth and storage consumption more than 90%* compared to traditional H.264 without smart streaming. In addition to its versatile coverage and features, the MA9322-EHTV is safeguarded by Trend Micro IoT Security to provide users with higher levels of network protection
VIVOTEK's newly designed MS9321-EHV multi-sensor panoramic network camera applies the brand new Robocop design with built-in sunshield to cover four 5-megapixel sensors in 65-degree vertical field of view and support IR illuminators effective up to 30 meters. It offers the highest resolution and maximum field of view, reducing the total number of cameras required and helping save on the installation costs. Furthermore, the MS9321-EHV is also safeguarded by Trend Micro IoT Security. Featuring 4 x 5MP CMOS Sensors, the multiple sensor network camera can monitor full 180° horizontal views and deliver the highest-quality comprehensive coverage, making it an ideal outdoor surveillance solution with excellent image details. Improving on the previous version, the MS9321-EHV now includes H.265 compression for reduced bandwidth and storage over H.264 compression. WDR Pro (120dB) has been added for improved image quality in high contrast environments. Smart IR II is included for manual or auto IR adjustments based on different night viewing scenarios. And last but not least, the MS9321-EHV is capable of 30fps at all resolutions including the max 20MP. Like its predecessor MS8391-EV, the MS9321-EHV has the Video Alignment feature that allows you to adjust the positioning and image quality of each sensor, enabling users to view a seamless picture, with no repetition. MS9321-EHV's new housing design is IP66 and IK10-rated to enable use in rain and dust as well as to protect against vandalism or tampering. The new housing design also allows for more tilt and pan during installation, allowing for more versatility.
Browse CCTV Video Signal Devices and Distribution Amplifiers
Video signal device products updated recently
In the state of the residential security market today, we see many who are offering home security packages that rely on numerous sensors and multiple devices to provide a comprehensive coverage of the home and provide peace of mind. Each individual sensor or device within the package provides a specific functionality, and the user finds himself burdened by an overwhelming amount of sensors and devices. This overload is intensified by the penetration of additional IoT and smart devices into the home, such as pet-cams or smart speakers that add to the burden of installation and maintenance. In addition, we are witnessing the rise in popularity of DIY security devices, indicating that users are looking for models and technologies that provide both contract flexibility and simplicity of use. The past years have seen major advancements in radar technology, which have brought the formerly military technology into the consumer space. Radars provide interesting prospects for home security and smart homes due to several inherent characteristics which give it an advantage over existing technologies. The resolution of an advanced radar sensor enables not only presence detection, but also provides advanced features for security, automation and well-being Advanced security and automation features Of primary importance, a consumer designed radar sensor provides the user with full privacy, but the use of radar is also beneficial because it is indifferent to environmental, temperature and lighting conditions. In addition, radar signals (at certain frequencies) are capable of penetrating through almost any type of material, enabling concealed installation, robust monitoring in cluttered spaces and even the coverage of several separate rooms with only one device. In terms of capabilities, simple time of flight 2-antenna radar sensors, which have been around for a while, do not provide much additional value in comparison to existing solutions and are not necessarily competitive in terms of pricing. However, the new generation of radar sensors are also opening up new capabilities previously achieved with optics only. Today, the resolution of an advanced radar sensor is high enough to enable not only presence detection, but also to provide advanced features for security, automation and well-being, all in one. Imagine for example, that the security sensor installed in your elderly parent’s home could also detect a fall having occurred, monitor the breathing of a baby or even leaks in your wall. Due to the unique field of view that radar provides as well as the multi-functional potential, this technology will be the key to the awaited convergence of smart home functionalities and minimisation of home devices. The security sensor installed in your elderly parent’s home could also detect a fall having occurred Secret of the consumer radar A radar sensor’s accuracy and its ability to support wide functionality and applications is determined initially by its resolution, which is based on two key factors: bandwidth and number of channels. The wider the bandwidth and the more channels the radar supports, the more accurate the data received. Imagine the difference between a 1990s television model and a 4K 2018 television model - As the resolution is ever improving, the sharper and more detailed is the image. When looking at the short-range radar sensor market, prominent companies such as Texas Instruments and NXP are offering radar-on-chip solutions supporting 2\3 transmitters (Tx) and 3\4 receivers (Rx), mainly utilising frequency bands of 77-81GHz, as they target mostly automotive and autonomous driving applications. Another company that develops such radar-on-chip solution is Vayyar Imaging, an Israeli start-up, founded in 2011, that developed a radar sensor for 3D imaging. Vayyar Imaging directly targets the smart home and security markets with its radar-on-chip, developing modules and products for intruder detection, automation and elderly care (fall detection). Providing not only chips, but complete systems, the new model makes radar technology highly available and accessible. The radar-on-chip technology opens the door to installation of security and well-being devices in locations where privacy or environmental conditions pose an issue Radar-on-chip solution The radar-on-chip solution supports 72 full transceivers, an integrated DSP and radar bands between 3-81GHz. The resolution provided by this type of specification is high enough to provide subtle information about people’s real time location posture (lying down\falling\sitting\walking), and breathing, and enables to classify pets from humans, but it is low enough as to not compromise privacy. This type of technology opens the door to installation of security and well-being devices in locations where privacy or environmental conditions pose an issue, such as in bathrooms or heavily lit environments. Moreover, utilisation of this technology allows to dramatically minimise the numbers of sensors installed in the home, as it provides full home coverage with just one or two sensors and enables using the same HW to support additional capabilities such as breath monitoring, fall detection and highly accurate automation. Using AI and machine learning, the data derived by these sensors can be leveraged to provide smarter, verified alerts on the one hand and whole new insights on the on the other. The sensor can be tuned to learn the location of the house entrances or boundaries, where the inhabitants are expected to be at night, or where they should be expected to enter from into the home, adding new logics to the traditional yes\no decision making. Home security is widely regarded as a necessity, provides peace of mind to people and is integral to people's day to day lives Additional smart home services Among the evolving home technology verticals, security is by far the most relevant and integral to people’s day to day lives. Home security is widely regarded as a necessity and provides peace of mind to people. Being a legacy industry with many well-known and well-trusted brands, security players are well positioned to introduce new technology into the home and have the ability and credibility to expand their offerings to additional smart home services by utilising existing infrastructure and channels. With technology giants entering the security arena through the smart home door the DIY security solution market expected to explode with a CAGR of 22.4% (according to a report by Persistence Market Research). Now that new pricing and service models offer minimal commitment, traditional security players will need to step up. Security companies will need to explore new technologies and expand their offering if they intend to stay relevant and competitive in a market trending on functionality converge and minimisation of maintenance and installation costs.
Everybody has been hooked on the discussions about Analogue HD or IP systems, but shouldn’t we really be thinking about WiFi and 5G connectivity, removing the need for expensive cabling? Are wireless networks secure enough? What is the potential range? Even the basic question about whether or not the network is capable of transferring the huge (and growing) amount of data required for High Res Video, which will soon be quadrupled with the advent of 4K and higher resolutions. The future of video surveillance monitors We have seen a massive uptake in 4K monitors in the security industry. While they have been relatively common in the consumer market, they are only now beginning to really take off in the CCTV market, and the advances in Analogue HD and IP technology mean that 4K is no longer the limited application technology it was just a few years ago. Relatively easy and inexpensive access to huge amounts of storage space, either on physical storage servers or in the cloud, both of which have their own positives and negatives, have really helped with the adoption of 4K. Having said that the consensus seems to be, at least where displays are concerned, there is very little need for any higher resolution. So, where next for monitors in CCTV? 8K monitors are present, but are currently prohibitively expensive, and content is in short supply (although the Japanese want to broadcast the Tokyo Olympics in 8K in 2020). Do we really need 8K and higher displays in the security industry? In my own opinion, not for anything smaller than 100-150+ inches, as the pictures displayed on a 4K resolution monitor are photo realistic without pixilation on anything I’ve seen in that range of sizes. The consensus seems to be, at least where displays are concerned, there is very little need for any higher resolution Yes, users many want ultra-high resolution video recording in order to capture every minute detail, but I feel there is absolutely no practical application for anything more than 4K displays below around 120”, just as I feel there is no practical application for 4K resolution below 24”. The higher resolution camera images can be zoomed in and viewed perfectly well on FHD and 4K monitors. That means there has to be development in other areas. Developments in WiFi and 5G What we have started to see entering the market are Analogue HD and IP RJ45 native input monitors. Whilst you would be forgiven for thinking they are very similar, there are in fact some huge differences. The IP monitors are essentially like All-In-One Android based computers, capable of running various versions of popular VMS software and some with the option to save to onboard memory or external drives and memory cards. These are becoming very popular with new smaller (8-16 camera) IP installs as they basically remove the need for an NVR or dedicated storage server. Developments in the area of WiFi and 5G connectivity are showing great promise of being capable of transferring the amount of data generated meaning the next step in this market would maybe be to incorporate wireless connectivity in the IP monitor and camera setup. This brings its own issues with data security and network reliability, but for small retail or commercial systems where the data isn’t sensitive it represents a very viable option, doing away with both expensive installation of cabling and the need for an NVR. Larger systems would in all likelihood be unable to cope with the sheer amount of data required to be transmitted over the network, and the limited range of current wireless technologies would be incompatible with the scale of such installs, so hard wiring will still be the best option for these for the foreseeable future. There will be a decline in the physical display market as more development goes into Augmented and Virtual Reality Analogue HD options Analogue HD options have come a long way in a quite short time, with the latest developments able to support over 4MP (2K resolution), and 4K almost here. This has meant that for older legacy installations the systems can be upgraded with newer AHD/TVI/CVI cameras and monitors while using existing cabling. The main benefit of the monitors with native AHD/TVI/CVI loopthrough connections is their ability to work as a spot monitor a long distance from the DVR/NVR. While co-axial systems seem to be gradually reducing in number there will still be older systems in place that want to take advantage of the benefits of co-axial technology, including network security and transmission range. Analogue technologies will eventually become obsolete, but there is still much to recommend them for the next few years. Analogue technologies will eventually become obsolete, but there is still much to recommend them for the next few years Another more niche development is the D2IP monitor, which instead of having IP input has HDMI input and IP output, sending all activity on the screen to the NVR. This is mainly a defence against corporate espionage, fraud and other sensitive actions. While this has limited application those who do need it find it a very useful technology, but it’s very unlikely to become mainstream in the near future. Augmented Reality and Virtual Reality Does the monitor industry as a whole have a future? In the longer term (decades rather than years) there will definitely be a decline in the physical display market as more and more development goes into AR (Augmented Reality or Mixed Reality depending on who’s definition you want to take) and VR (Virtual Reality). Currently AR is limited to devices such as smartphones (think Pokémon Go) and eyewear, such as the ill-fated Google Glass, but in the future, I think we’ll all have optical implants (who doesn’t want to be The Terminator or RoboCop?), allowing us to see whatever we decide we want to as an overlay on the world around us, like a high-tech HUD (Heads Up Display). VR on the other hand is fully immersive, and for playback or monitoring of camera feeds would provide a great solution, but lacks the ability to be truly useful in the outside world the way that AR could be. Something not directly related to the monitor industry, but which has a huge effect on the entire security industry is also the one thing I feel a lot of us have been oblivious to is the introduction of quantum computers, which we really need to get our heads around in the medium to long term. Most current encryption technology will be rendered useless overnight when quantum computers become more widespread. So, where does that leave us? Who will be the most vulnerable? What can we do now to mitigate the potential upheaval? All I can say for sure is that smarter people than me need to be working on that, alongside the development of the quantum computer itself. Newer methods of encryption are going to be needed to deal with the massive jump in processing power that comes with quantum. I’m not saying it will happen this year, but it is definitely on the way and something to be planned for.
Transmission of video and PoE power for IP security cameras over infrastructures can be confusing. Network infrastructures are designed using twisted pair cabling that we refer to as CAT (short for Category) cable, also referred to as UTP (Unshielded Twisted Pair). Security systems, coming from an analogue environment, have historically transmitted over coax cable, and with the use adaptors can transmit over CAT cabling, which can be further broken down into single pair twist and untwisted applications. Cabling shares one, often misunderstood commonality. Any physical medium has a form of resistance to any element carried on that cable. With regard to network transmission over CAT 5 and greater (5e, 6, 7), there is a distance limitation of 328 feet or 100 meters. The applicable standards state that the bandwidth applied at one end of the cable at 10/100/1000 (1G)Mbps will be realized at the other end. This is also where we find the first limitation. At this same 328-foot distance there is a loss of PoE power. 802.3af or 15.4 watts is a value realized only at the PoE source. Under the standard, after traveling through 328 feet, the power at the camera is 12.95 watts. The same is true for 802.3at which has a source power of 30 watts and 328-foot distance power of 25 watts. The advent of IP security cameras has resulted in the need to maintain existing coax cable for networking applications. The first thing to realise is there are no standards for network transmission over coax. In reality the characteristics governing coax can be considered the opposite of CAT twisted pair cable. CAT cabling for network transmission consists of 4 wire pair, 2 of which are used for signal and PoE transmission. This ability to separate PoE and bandwidth transmitting over two pairs maximises power transmission. Coax cable, when used in the same application, is limited to a single pair – centre conductor and shield. Its characteristics promote bandwidth but limit PoE transmission compared to UTP cable. I emphasize again, there are no standards for coax cable transmission. This process becomes more confusing when you realise there are various type of cables that are called either UTP or Coax. All of these cable have different characteristics that have a direct impact on their ability to transmit bandwidth and PoE. The standards for UTP transmission were set for CAT 5 (5e). Categories 6, 7 and above will tend to have lower cable resistance and longer transmission distance; CAT 3, higher resistance and shorter distance. Common types of coax cable have varying distance limitations The same applies to coax cable. Again there is no standard, the typical cable found in analogue security applications is RG-59. In general, application distance limitations ran between 750 to 1000 feet, greater than the 328 network limitation. This is why extenders are required to convert from coax to UTP and to extend the signal and power range. As with UTP cable, there are two similarities. First, there are different grades of coax; second, there are different types. All these differences generally apply to cable resistance and therefore distance performance. The most common types of coax cable are: RG 59, RG 6 and RG 11 Why is this important? In general there are two reasons. The first is in specifying equipment for a video security system, you are generally dealing with existing wiring and a fixed performance requirement. It is important to know the type and condition of the wiring in order to know what system performance requirements can be met. Second is a function of understanding specifications for the transmission equipment that will be used in the infrastructure. As noted, when maintaining coax, the use of coax-to-Ethernet convertors/extenders is required. In many cases even when UTP is used, distances over the 328-foot limit are required. A manufacturer’s product specification sheet can truthfully state their products can perform at 100 Mbps, they can handle 802.3at 30 watts and they can transmit distances up to 6,000 feet. However these must be viewed as separate performance claims. The key word is separate. Notice in these statements there is nothing that ties 100Mbps and/or 30 watts (these are examples only) and claimed distance of 6,000 feet together. Neither is the type of cable used indicated. By themselves, each individual claim is truthful; however, applications require they work together, and this is usually not the case. Many times it is difficult to read between the lines of manufacturer’s specifications. Failure to do so can cost additional time, money and even lead to removing the infrastructure itself. There is a simple answer. Call the manufacturer and have them confirm that their solution will perform as required for your specific application. If necessary, ask for proof that they have conducted testing to support their performance claims. Infrastructure is confusing, and you don’t need to be an expert, you just need to ask the right person(s) the right questions.
Financial institutions require future-ready physical security technologiesDownload
Understanding the trade-off between image resolution and field of viewDownload
A blind spot in governance, risk and complianceDownload
- March Networks’ video solution used at Quik-E c-stores to protect profits and recoup losses
- Idesco Security Key Management Service secure Evotec’s systems against cargo thefts
- Ultimate Visual Solutions utilises videowall technology in iNTU's Trafford Centre Control Room
- MOBOTIX IP camera solution secures Italian Ministry of Economy and Finance