US Edition
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
ASIS 2017

Network / IP - News

ISC West 2016: Software House’s OSDP compliant products on display at Tyco Security Products booth

Published on 6 April, 2016
Tyco Security Products is participating in the SIA InteropFest & Cocktail Reception at ISC West 2016
Supported on iSTAR Ultra controllers & C•CURE 9000 v2.50, SIA’s OSDP specification allows enhanced network interoperability

Tyco Security Products is announcing that its Software House C•CURE 9000 v2.50 event management platform now supports Open Supervised Device Protocol (OSDP), developed by the Security Industry Association (SIA) to allow for enhanced interoperability among security devices, such as reader-to-panel communications. The OSDP compliant products from Software House will be on display at the Tyco Security Products booth 20005, at ISC West, April 5-8, in Las Vegas, Nev.

OSDP is supported on Tyco Security Products’ iSTAR Ultra series controllers and has been initially tested and certified to interface with HID Global iCLASS SE® platform readers and Allegion aptiQ readers, providing a two-way encrypted link using OSDP Secure Channel. The OSDP specification handles a full range of access control and security commands including LED and buzzer control, text display, tamper and communications status and firmware status for a complete interoperable experience.

“Getting onboard with initiatives such as OSDP means greater flexibility through standards-based interoperability for Tyco Security Products,” said Rick Focke, Senior Product Manager, Software House, Tyco Security Products. “OSDP is both highly secure and intelligent, and we’re excited to support it and continue to build on our portfolio of OSDP compatible products.”

Tested & certified to interface with HID iCLASS SE® and Allegion aptiQ readers

HID Global’s iCLASS SE reader platform, including iCLASS SE, multiCLASS SE®, and pivCLASS® brands, enable highly secure, adaptable and interoperable physical access control. These intelligent readers support a wide variety of traditional 13.56MHz contactless smart cards, 125kHz proximity credentials and magnetic stripe cards, as well as Bluetooth and NFC-enabled smartphones and other smart devices used for opening doors and gates via HID Mobile Access®.

aptiQ™ Multi-technology Readers from Allegion interface with magnetic stripe cards, proximity cards, MIFARE® Classic smart cards and ultra-secure MIFARE DESFire™ EV1 credentials, and can read the card serial numbers of a variety of smart cards from other manufacturers. The readers handle applicable ISO standards (14443A, 14443B, 15693) and are versatile enough to read 125 kHz proximity and 13.56 MHz contactless smart cards in a single unit.

“Manufacturers who adopt OSDP support into their portfolios recognise the importance of adopting open standards to open up additional functionalities within their products” said Joe Gittens, Director, Standards, Security Industry Association. “These adoptions really help to promote system interoperability across the industry.”

Tyco Security Products is participating in the SIA InteropFest & Cocktail Reception at ISC West on April 6 at the Sands Expo and Convention Center, which will showcase network interoperability using OSDP.

See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition