US Edition
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Detailed technical specifications of Vanderbilt CDC0402 Pos, one of over 30 CCTV pan tilts from Vanderbilt
  • Technical spec
Please note: this is a discontinued product.

Vanderbilt CDC0402 Pos

SaveSave Go to Replacement product
Manufacturer: Vanderbilt Industries Vanderbilt Industries
Vanderbilt CDC0402 Pos CCTV pan tilt
Model CodeCDC0402 Pos
Electrical SpecificationsVoltage: 230 VAC
Physical SpecificationsDimensions mm: 300 x 175 x 320
AccessoriesPower Supply Unit / Telemetry Control Unit
Environmental SpecificationsProtection: IP67
Model InfoControl units are required for operating pan-and-tilt drives as the control commands from the control centre must be converted into electrical signals for the motors in the pan-and-tilt drive. The two CDC0401 and CDC0402 control units are particularly suitable for operation of pan-and-tilt drives with a power supply of 24 VAC or 230 VAC. The control units are driven via the SIMATRIX matrix range or the SUT48 keyboard. As the protocol is compatible with the SCU301 and SCU302 control units, extension of existing SIMATRIX systems by the two control units from this economy line is easily possible. Baud rate: 600 ~ 19,200 bits/s. Also includes position control for zoom/focus and pan/tilt for 14 stored preset positions. Automatic position cycle can be programmed and recalled.

Download Technical spec

Product News


See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition