US Edition
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Detailed technical specifications of Pelco IMP319-1ERP, one of over 226 IP Dome cameras from Pelco
  • Technical spec

Pelco IMP319-1ERP 1/3.2-inch day/night IP dome camera with 3 megapixel resolution

Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: Pelco by Schneider Electric Pelco by Schneider ElectricDownload DatasheetDownload Datasheet
Pelco IMP319-1ERP IP Dome camera
Model CodeIMP319-1ERP
Chip Inch Size1/3
Colour TypeColour / Monochrome
Resolution TVL3 MP
Dome TypeStatic
Sensitivity lux0.00
Digital (DSP)Yes
Mount TypePendant
Focal length3 ~ 9 mm
Rotation Angleso360
White BalanceYes
Electronic Shutter range1/5 ~ 1/10,000 sec
Electrical SpecificationsVoltage: 18 ~ 32 V AC
Power Consumption: <10.50 W
Network PropertiesInterface: 100Base-TX, RJ-45
Network Protocols: TCP/IP, UDP/IP (unicast, multicast IGMP), ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP (client), QoS
Image Frame Rate: 20 ips
Physical SpecificationsWeight g: 860
Environmental SpecificationsOperating Temp oC: –40 ~ +50 C (–40 ~ +122 F)
Operating Humidity %: 15 ~ 85
Protection: IP66, IK10
System RequirmentsWeb Browser: Microsoft® Internet Explorer® 8.0 and later
Model InfoPelco IMP319-1ERP is a 1/3.2-inch day/night IP dome camera with 3 megapixel resolution, autofocus motorised remote zoom lens, accessible edge storage with micro SD card, motion detection and camera sabotage analytics, power over ethernet (PoE) and 24 VAC power input and ONVIF Profile S conformant.

Download Technical spec

See comparison of Pelco IMP319-1ERP with similar Pelco IP Dome cameras
Compare Pelco IMP319-1ERP with IP Dome cameras from other manufacturers

Product News


See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition