US Edition
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Detailed technical specifications of Idesco Access 7 Apin, one of over 59 Access control readers from Idesco
  • Technical spec

Idesco Access 7 Apin

Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: Idesco IdescoDownload DatasheetDownload Datasheet
Idesco Access 7 Apin Access control reader
Model CodeAccess 7 Apin
SeriesAccess 7 Series
Reader TypeProximity
Standalone/ NetworkableStandalone
IP RatingIP47
Mount TypeSurface
Keypad IntegratedYes
LED / BeepLED / Beep
Wiegand InterfaceYes
ProtectionVandal & Weather Resistant
Electrical SpecificationsVoltage: 24 V DC
Power Consumption: 50 mA
Physical SpecificationsDimensions mm: 138 x 44 x 24
Environmental SpecificationsOperating Temp oC: -40 ~ +55
Model Info

Access 7 Apin improves security in access control by providing pin code identification to be used together with an identification card.  The keypad of the reader is based on EMFi foil technology.  The EMFi foil senses the pressure changes on the active key area when pressed.  There are no moving parts in the pin pad, and due to this no maintenance is required.  The foil as well as the electrical parts of the reader are cast in epoxy and are therefore safe from damage inside the reader.  These readers can be used as a proximity reader only, or as a pin pad reader only or both combined.  This can be configured in the system.

Download Technical spec

Product News


See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition