Senstar Security alarm
Exhibiting at IFSEC 2010, stand 4E102At IFSEC, Booth E102 / Hall 4 in 2010 for IFSEC, you will see Senstar's latest technologies and products on display. Amongst the array of products on show will be the Sentient Security Management System (SMS). It designed to display and manage alarm and status information for applications where ease-of-use, integration with a diverse array of security equipment, and meeting the reliability requirements of high-security environments are paramount. Sentient comes pre-integrated with a range of Senstar sensors so the work of adapting Sentient to a specific site - adding maps, assigning zone and sensor icons to maps, etc., can begin immediately without a software integration exercise. Sentient is the ideal solution for managing perimeter security systems based on Senstar's wide array of perimeter intrusion detection sensors.
Detects shock, impact and sustained attack. Used on walls, roofs, ceilings, stock cages, floors and pipes. Microphonic / strain-sensitive technology. Selectable frequency response. Up to 1,115 sq. m (12,000 sq. ft.) coverage per zone. Built-in calibration indicator. Built-in audio "listen-in" capability.
The XField® sensor is a terrain-following volumetric sensor that creates an electrostatic field around a set of 4 or 8 parallel field and sense wires that causes its processor to sense changes when events, such as intruders penetrating the wires, take place.
Panther® II is a covert perimeter intrusion detection sensor that generates an invisible electromagnetic field around buried sensor cables. If an intruder disturbs the field, an alarm is declared. The sensor's covert nature makes it perfect for sites that require high security or where keeping the site's appearance intact is paramount. It is ideal for applications with up to 400 m (1,312 ft.) of perimeter to protect.
The FPS (Fence Protection System) strain sensitive cable sensor system detects mechanical disturbances on the fence caused by cutting, climbing or lifting. Advanced signal processing extracts the maximum amount of data from the fence. More information means better alarm decisions.
Senstar now offers high resolution radars that accurately detect personnel and vehicles from 5 m (16 ft.) up to 2800 m (1.7 miles) in virtually any climate or weather condition to provide 24 / 7 security. The Family of Radars includes three models: R-7, R-14, R-28, each optimised for a different maximum range. The detection accuracy and ease of integration and operation of the revolution series of radars makes it an ideal choice in securing borders, airports, ports, force protection or any large compound with critical assets. Features / benefits Detects personnel and vehicles Tangential detection capability Continuous wide area surveillance Low False Alarm Rates (FAR) Annunciator integration Simple to operate Cost effective ICD-0100 interface Camera integration - optional Markets Borders Airports Ports Military Petrochemical industry National and critical assets radar
This unique fiber optic cable intrusion detection sensor is used in outdoor, fence-mounted perimeter security applications. This sensor will detect an intruder cutting through, climbing on or lifting the fence fabric by analyzing the signals generated by flexing the cable.
Senstar's taut wire perimeter intrusion detection system is designed to detect and also physically prevent intrusions by unauthorized personnel into high security sites. Its key advantage is that it has no environmental limitations and has a very high Probability of detection (Pd) and a virtual absence of false and nuisance alarms.
At the ISC West tradeshow Senstar will showcase its latest perimeter protection solution. Amongst the products in the spot light were the Flex PS - Sentstar's next generation of fence - mounted sensor that combines the best of two proven technologies into one, and FlexPI- an intrusion detection sensor for the protection of unsupervised building interiors.FlexPS key features:FlexPS™ Advanced digital signal processing allows it to adapt to a wide variety of fence types. FlexPS builds upon Senstar's wealth of experience with its Intelli-FLEX and FPS fence sensors to deliver a sensor that is simple to install, provides networking capability for remote alarm reporting and configuration, and works reliably in the most extreme environments.Like its predecessors, FlexPS gives advanced warning of unwanted intrusions at the perimeter and is easily installed on most fences by attaching its lightweight sensor cable to the fence fabric with cable ties. The FlexPS processor is outdoor rated and easily post mounted or fixed to any convenient supporting surface. Alarms can be reported locally at the processor via relays or communicated to a central location using an optional networking capability. For extreme protection, the Armour-Flex™sensor cable adds a flexible steel conduit outer jacket to the standard cable.FlePI key features: FlexPI™ adapts Senstar's proven microphonic cable technology to the specialized requirements of indoor security applications. FlexPI can function with a wide range of surfaces and materials when protecting structures such as walls, ceilings, roofs, stock cages, floors and pipes. It is easily integrated into most existing alarm systems.
StarLEDTM 200 is a solid-state infrared Light Emitting Diode (LED) illuminator that creates light which, while invisible to the naked eye, illuminates targets for surveillance by standard infrared sensitive CCTV cameras. StarLED 200 is the low power answer for supplemental lighting for sites with inadequate levels or non-uniformity in their conventional lighting system.
The MPS-24000 microwave sensor is a volumetric perimeter intrusion detection system. Designed for high performance, cost effective operation and ease of installation, the MPS-24000 microwave sensors provide an extremely high Probability of detection (Pd) with a low Nuisance Alarm Rate (NAR) in most scenarios.
The MPS-16000 microwave sensor is a volumetric perimeter intrusion detection system. Designed for high performance, cost effective operation and ease of installation, the MPS-16000 microwave sensors provide an extremely high Probability of detection (Pd) with a low Nuisance Alarm Rate (NAR).
Intelli-FLEXTM is a microphonic cable intrusion detection sensor and proven fence-mounted system for outdoor perimeter security applications. Serving a range of markets, Intelli-FLEX detects intruders cutting through, climbing on or lifting the fence fabric.
FlexPI™ is an intrusion detection sensor used to protect unsupervised building interiors. It adapts Senstar's proven microphonic cable technology to the specialized requirements of indoor security applications. FlexPI can function with a wide range of surfaces and materials when protecting structures such as walls, ceilings, roofs, stock cages, floors and pipes. It is easily integrated into most existing alarm systems.*terminator kit, non-sensitive lead-in cable in 30 m (98 feet) roll, Universal Configuration Module (UCM) software on CD, USB cable
Perimitrax® is a covert terrain following intrusion detection sensor. Intruders are detected as they pass through an invisible electromagnetic field that surrounds buried cables. The response depends upon the size of the target so people are detected while small animals are not. The speed of the target is used to discriminate between intruders and environmental changes, resulting in reliable detection of intruders with a minimum of nuisance and false alarms.
Repels® is a portable outdoor security sensor that operates like a radar fence. It creates an invisible electromagnetic detection zone along the path of two parallel cables that are supported by poles driven into the ground. Repels is designed specifically for perimeter protection and has none of the limitations of line-of-sight sensors.
This long range high performance bistatic microwave provides invisible volumetric perimeter protection for a distance up to 457 m (1500 ft). The MPS-14000 detects intruders in outdoor environments and is unaffected by rain, snow, wind or other sources of nuisance alarms. The low current operation makes the MPS-14000 reliable and cost-effective.
Senstar's Omnitrax is the world's leading covert intrusion detection system. Invented and made in Canada, Omnitrax can be found on the perimeter of critically sensitive sites throughout the world including airports, borders, high risk industrial facilities including petrochemical and nuclear facilities, commercial installations, correctional facilities and VIP residents, including Heads of State.Buried 23 cm below the ground (in any surface including asphalt, sand, grass, etc.), it senses targets based on their conductivity, size and movement. An alarm is declared when the invisible radar detection field is disturbed. Systems can be standalone or networked for long perimeters. Omnitrax can also provide 50 alarm reporting zones which means it can be calibrated for varying sensitivities to give pinpoint accuracy. Omnitrax also provides detection capability, power and data within the same cable.
Senstar Corporation, a world-leader in outdoor perimeter security technology and products, introduced its newest generation microwave – µltraWave™, an all-digital volumetric sensor that provides advanced warning to security forces of unwanted intrusions.µltraWave combines advanced electronics with Senstar’s decades of experience in outdoor perimeter security sensors to deliver superior performance in perimeter protection. Key benefits of this new sensor include ease of use, powerful networking capabilities and long-term reliability. “As we celebrate our 30th anniversary in 2011, Senstar is proud of the fact that we are investing to enhance our technologies and products for the demands of today,” said Brian Rich, President, Senstar Corporation.“As the market leader in outdoor perimeter intrusion detection products, we bring increased value to our customers with µltraWave – easier installation and set up, remote monitoring and calibration, long term support of the electronics, the reliability of digital circuitry and a clear migration path from our current microwave products into the next generation,” Rich added. µltraWave’s sophisticated detection algorithms look for specific responses that discriminate real intrusions from environmental effects. It comes with a Windows-based software configuration tool with intuitive screens. Calibration is streamlined with minimal settings and sensor response data can be viewed and recorded in real-time to evaluate sensor Probability of detection (Pd) and Nuisance Alarm Rates (NAR).Highly stable RF sources allow for 10 operating channels, allowing even the densest concentration of microwaves. µltraWave works with Senstar’s Silver Network™ that unleashes the benefits of reliable alarm communication, remote setup and diagnostics using the same Windows® screens as used at the processor, and a flexible IP/Ethernet interface to the Security Management System (SMS). µltraWave now adds microwave sensor compatibility to the same network as Senstar’s other new generation sensors: the OmniTrax® buried cable sensor, the FlexPS™ fence sensor and the X-Field® electrostatic sensor. While the MPS-4100, and other previous generation microwave products will continue to be supported, µltraWave will become the choice for new sites as well as expansions, upgrades and replacement of existing systems.Comparably priced with Senstar’s analogue volumetric microwave sensors, µltraWave is an ideal solution for commercial and industrial sites, the petrochemical industry, correctional facilities, military bases, critical infrastructure sites, airports and VIP installations.
As a security management system, Senstar's StarNeT 1000 displays site information on site-specific maps and/or images and enables point-and-click control of all security system components via menus and screen icons. Security operators do not require special computer skills and quickly adapt to StarNeT 1000 as it was designed with ease-of-use in mind. Operator keyboard interface is required for only a few administrative functions and most interaction is via an intuitive mouse, trackball, and / or touchscreen interface. This greatly increases the speed and accuracy of operator response to emergencies while simultaneously minimising training costs. Senstar's StarNeT 1000 Security Management System (SMS) is flexible enough to suit any site from a simple standalone system to a multiple workstation, multiple site application with full hardware redundancy. A StarNeT system can be expanded, upgraded or modified at any time and is supported by Senstar, the world's leading supplier of outdoor security solutions. StarNeT 1000 allows system integration personnel to develop the specific user interface screens and operating modes desired and to assign security personnel appropriate password-controlled priority levels for access to menus, features, and controls. SIMPL™, the system configuration component of StarNeT 1000, provides a powerful but easy-to-use tool for system design.