OT Systems PoE
OT Systems ET4222PpH is an etnernet switch that support IGMP with a simple click of a dip switch. In large IP CCTV surveillance systems, IP cameras employ multicast transmission to reduce the needed bandwidth. However, an unmanaged Ethernet switch is poorly equipped to receive multicast packets; it converts them to broadcast packets. The system then sends broadcast packets to every port in the switch resulting in video loss or disconnection. OT Systems has eliminated that concern. By simply changing the dip switch, the ET4222PpH efficiently receives multicast packets and only forwards the data to the appropriate port. This innovative feature saves bandwidth and maximises the switch performance, increasing the systems effectiveness and reliability.
Support IEEE 802.3at PoE+ (30W per port) Multicast / Broadcast / Flooding Storm Control Support 802.1p QoS, 4 queues per port 9K Jumbo Frames 1Mbit Packet Buffer Memory Fanless design Dual power input (12 ~ 58 VDC) IP30 DIN-Rail and Wall mounting options
The IET8242MPp Series is especially designed for high speed data communication of PoE devices in local and remote endconnections.The IET8242MPp Series is the fully managed switches offering eight 10/100/1000Mbps copper twisted-pair ports with high power PoEplus four 100/1000Mbps SFP ports.
ET4100CPp-TS is a transmitter of 4-port 10/100Mbps TX (PoE+) to 1-port coax ethernet switch with PoC featuring maximum transmission distance: 800m on RG-59/U coaxial cable, connecting up to 4 IP cameras or devices and automatically supports multicast transmission(IGMP).
8 10/100/1000Base-TX(PoE+) + 2 100/1000Base-FX SFP Support IEEE802.3at PoE+(30W per port) RJ45 Port Supports 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX SFP Slot Supports 100/1000Mbps Supports IEEE802.1p Qos and Cos/Tos Supports IGMP v1/v2, up to 256 groups Web GUI, Serial Console, CLI Command configuration Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3 Network Redundancy support: G.8032 ERPS, RSTP, MSTP Redundant Power Inputs DIN-Rail and Wall-mount options
2 10/100/1000Base-TX + 1 1000Base-FX SFP Automatically support IGMP (Multicasting) 10/100/1000Mbps RJ45 Port Supports Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX Supports 802.3x Flow control Supports external 1000Base SFP Supports IEEE 802.3at PoE+ (30W) Supports Light Hardware IGMP V1, V2, V3 Supports Broadcast Storm Control 1M bits frame buffer memory 9K Bytes Jumbo Frame Supports Relay output for Power failure and port failure alarm Redundant Power Inputs Supports Wall-mount and DIN-Rail installation
ET4222Pp-S-DR is an industrial IP CCTV Self-Configured 4-port 10/100/1000Base Ethernet switch, which automatically supports IGMP (Multicasting) and 10/100/1000Mbps-full/half-duplex,auto-negotiation, auto MDI/MDI-X. Additionally, the ethernet supports wall-mount and DIN-Rail installation.
ET5200Pp-DR is an industrial IP CCTV self-configured 5-port 10/100/1000Base-TX Ethernet switch featuring 1M bits frame buffer memory and 9K bytes jumbo frame. The Ethernet switch supports light hardware IGMP V1, V2, V3 and supports broadcast storm control.
Support IEEE 802.3at PoE+ (30W per port) Multicast / Broadcast / Flooding Storm Control Support 802.1p QoS, 4 queues per port 9K Jumbo Frames 1Mbit Packet Buffer Memory Fanless design Dual power input (12 ~ 58 VDC) IP30 DIN-Rail and Wall mounting options Hardened Series Wide Operating Temperature Range -40°C to 75°C (-40°F to 167°F)
8 10/100/1000Base-T(PoE+) + 2 10/100/1000Base-T or 100/1000Base-X SFP Support IEEE802.3at PoE+(30W per port) RJ45 Port Supports 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX SFP Slot Supports 100/1000Mbps Supports IGMP v1/v2/v3, up to 1024 groups Supports IEEE1588v2 PTP Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3 Web GUI, Serial Console, CLI Command configuration Network Redundancy support: G.8032 ERPS, RSTP, MSTP 6KV surge protected Redundant DC Power Inputs Embedded Surveillance Device Management
1 RJ45 PoE PSE input port (data+power) + 1 RJ45 Ethernet data output port (data only) Support 10/100/1000Base-TX Support IEEE802.3at Power over Ethernet (PoE+) power sourcing equipment Extensive LED indicators for PoE diagnostics Support DIN-Rail & wall-mount installation
Converts 100Base-TX to 100Base SFP Supports IEEE802.3at PoE+(30W) Supports full/half duplex Supports DIN-Rail & wall-mount installation Supports auto MDI/MDI-X Supports external 100Base SFP Extensive LED indicators for network diagnostics Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature
Converts 10/100/1000Base-T to 1000Base-X SFP Supports IEEE802.3at PoE+ (30W) Supports external 1000Base SFP Supports full/half-duplex, auto-negotiation, auto MDI/MDIX 9K bytes jumbo frame Supports desktop & wall-mount installations -10°C to 60°C (14°F to 140°F) operating temperature
Genetec to host its first virtual tradeshow Connect’DX 2020 to connect with physical security professionals