Linear MCS308911 1-channel visor transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches. It is supplied with visor clip.

Linear MCS412001 2-channel visor transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches. It is supplied with visor clip.

Linear's MCS109950 gate receiver is designed for use with automatic gate operators or systems where a remote antenna is needed. . Nearly all gate operators offer either 24 or 12 volts AC or DC as accessory power. The MCS109950 has a single relay and replaces three different Multi-Code gate receivers. 

Linear MCS306010 1-channel key ring transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches.

Linear DXR-701 is a digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the relay output activates. The relay has four optional output configurations. A nine-inch wire lead serves as the receiver's antenna. The red program indicator lights during RF reception. The installer can verify that signals are being sent from transmitters and diagnose interference problems by viewing the indicator. The indicator also lights during memory programming/erasing and flashes to count the number of transmitters in memory.

Linear D-67 1-channel receiver is designed for use in security systems and remote switching functions. Typical applications for the receiver include adding a wireless zone, a panic button, or creating a remote arm/disarm feature for a hardwired alarm panel. Each time a transmitter is triggered with a digital code matching the receiver’s digital code, the receiver’s relay will activate for four seconds.

The 212 Series keypads are designed for basic access control or code control for up to four individual devices (model dependent). These keypads are the perfect choice for controlling electric or magnetic locks, security systems, elevator control, gate controls, or other types of equipment requiring on/off or momentary control inputs.

The 212w style single door access control keypad is designed to meet the indoor/outdoor flush mount needs of lighter volume access control environments. The w style features a sealed membrane keypad that allows the keys to be cleaned and resist moisture. There are three LED’s to indicate operation status and provide the user with visual PIN entry confirmation.

The 212 Series keypads are designed for basic access control or code control for up to four individual devices (model dependent). These keypads are the perfect choice for controlling electric or magnetic locks, security systems, elevator control, gate controls, or other types of equipment requiring on/off or momentary control inputs.

Linear D-22A handheld transmitter is a single-channel transmitter normally used as a "panic button" in security systems. It is also used in many remote switching applications where a portable transmitter is required. Each transmission causes the red LED indicator on the front of the transmitter to light, showing that the transmitter is sending a signal and that the battery is in good condition.

The 2000 Series access control keypads combine all of IEI’s functionality groups into one powerful platform. The 2000 Series access control keypads manage up to 500 users and provide complete access control functionality including monitoring door position; controlling locking hardware; triggering a propped or forced door alert or alarm shunt output.

Linear prox.pad wiegand 125 kHz proximity reader with keypad is a stand alone proximity reader and keypad that can be directly mounted to a single-gang electrical box or to most flat surfaces. The prox.pad provides standard access control functionality with the use of its two relays and two inputs for request to exit and door position. By utilising the proximity reader and keypad together, a higher level of security is achieved by requiring both to grant access. The prox.pad can be used for stand alone access control, or used as a reader for IEI access systems or most Wiegand systems. The proximity reader is capable of being mounted up to a maximum of 10 feet away from the prox.pad.

Linear prox.pad plus integrated proximity reader and controller with keypad. The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position, and enhanced system functionality when used with Hub Manager Professional software. The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality. The software can communicate to the prox.pad plus either through a 485 connection, or on a LAN/WAN using the SEG-1 TCP/IP communication device.