CEM Door access control

CEM IOC/000/010 is a 64 floors lift control interface that allows seamless control and monitoring of access between elevator floors. Depending on how many floors need controlled, each lift must have a Lift Control Interface (LCI) unit, which is used in conjunction withthe CEM S9032 lift controller.

CEM DAC/390/064 is a 64 doors intelligent networked device for door entry/exit control and alarm monitoring. Feature includes: Intelligent embedded network device for access control and alarm monitoring with the CEM AC2000 system Supports up to 64 doors (128 readers IN/OUT) Battery backup available in case of power failure 64 MB compact flash for database with expansion available Storage capacity for up to 250,000 card records

The CEM sDCM 350 is an ecrypted serial door controller with eight supervised inputs and four output relays. It has integrated backup battery  monitoring and trickle charging. It is also suitable for use with AC2000 Lite and AC2000 SE security management systems.

CEM CEQ/576/004 is a 4 port two door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

CEM CEQ/576/016 is a 16 port two door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

CEM CEQ/576/008 is a 8 port two door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

CEM DCM/351/005 is a two door intelligent encrypted serial controller designed to interface to CEM sPass DESFire smart card readers. feature includes: Support for two doors Two encrypted RS485 reader communication connections RS485 host connection Eight Supervised inputs (Four inputs per door) Four outputs Two Relays (normally opened or normally closed) Two FET’S (Field Effect Transistor’s) with 12V supply Self resetting fuses – saves maintenance time Onboard LED indicators- provides visual status

CEM CEQ/576/001 is a 1 port two door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

CEM DCM/310/006 is a two door controlller designed to interface third-party read heads with the CEM range of access control systems. Feature includes: Support for two doors RS485 host connection Structured database allows storage of large amounts of cardholder records for off-line card validation Reader communications via standard Wiegand or Mag Stripe interfaces Eight Supervised inputs (four available per door) Two Relays (normally opened or normally closed) Self resetting fuses – saves maintenance time Onboard LED - provides visual status Dedicated Tamper input

CEM DCM/351/101 is a two door intelligent encrypted serial controller designed to interface to CEM sPass DESFire smart card readers. feature includes: Support for two doors Two encrypted RS485 reader communication connections RS485 host connection Eight Supervised inputs (Four inputs per door) Four outputs Two Relays (normally opened or normally closed) Two FET’S (Field Effect Transistor’s) with 12V supply Self resetting fuses – saves maintenance time Onboard LED indicators- provides visual status

CEM RDR/611/101 is a card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/105 is a MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/104 is a proximity and MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/108 is a HID iClass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/118 HID iClass card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/611/106 is a PicoPass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/104 Prox & Mifare card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/111 HID Prox card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/114 is a Prox & Mifare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/117 is a DESFire card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/115 MiFare card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/101 is a HID Prox card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/615/104 dual tech card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM DCM/330/101 is a two-door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

CEM RDR/615/105 MiFare card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM RDR/615/108 HID iClass card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM RDR/612/109 is an exit card reader with PIN designed for use as part of an integrated on-line access control system. The Exit Reader is an extension to the master reader, providing a combined total of features at the point of entry. It communicates directly with the master reader.

CEM RDR/612/114 is an exit card reader with PIN designed for use as part of an integrated on-line access control system. The Exit Reader is an extension to the master reader, providing a combined total of features at the point of entry. It communicates directly with the master reader.