MOBOTIX CCTV Storage System / HDD

The past decade has seen unprecedented growth in data creation and management. The products and services that consumers use every day – and the systems businesses, large and small, rely on – all revolve around data. The increasing frequency of high-profile data breaches and hacks should be alarming to anyone, and there’s a danger data security could worsen in the coming years. According to DataAge 2025, a report by IDC and Seagate, by 2025, almost 90% of all data created in the global datasphere will require some level of security, but less than half of it will actually be secured. Nuanced approach to data security Security is a circle, not a line. Every actor involved in the handling and processing of data has responsibility for ensuring its securityThe rapid proliferation of embedded systems, IoT, real-time data and AI-powered cognitive systems – as well as new legislation like the European Union’s GDPR – means that data security has to be a priority for businesses like never before. With data used, stored and analysed at both the hardware and software level, we need a new and more nuanced approach to data security. Security is a circle, not a line. Every actor involved in the handling and processing of data has responsibility for ensuring its security. What this means in practice is renewed focus on areas of hardware and software protection that have previously not been top of mind or received large amounts of investment from businesses, with security at the drive level being a prime example. The importance of data-at-rest encryption In a world where data is everywhere, businesses need always-on protection. Data-at-rest encryption helps to ensure that data is secure right down to the storage medium in which it is held in a number of ways. Hardware-level encryption, firmware protection for the hard drive, and instant, secure erasing technology allow devices to be retired with minimal risk of data misuse. Data-at-rest encryption helps to ensure that data is secure right down to the storage medium in which it is held in a number of ways A recent report from Thales Data Threat found that data-at-rest security tools can be a great way to help protect your data. However, it’s important to note that this must be used in conjunction with other security measures to ensure that those that fraudulently gain access to your key management system can’t access your data. Ensuring drives to be Common Criteria compliant One straightforward test any business can do to ensure its storage is as secure as possible is to check whether the drives are Common Criteria compliantDespite the clear benefits, this kind of encryption lags behind other areas, such as network and endpoint security, in terms of the investment it currently receives. The same Thales Data Threat report found that data-at-rest security was receiving some of the lowest levels of spending increases in 2016 (44%), versus a 62% increase for network and a 56% increase for endpoint security. One straightforward test any business can do to ensure its storage is as secure as possible is to check whether the drives are Common Criteria compliant. Common Criteria is an international standard for computer security certification, and drives that meet this standard have a foundational level of protection which users can build on. Providing an additional layer of security The retail industry has seen a spate of security breaches recently, with several major US brands suffering attacks over the busy Easter weekend this year. As frequent handlers of consumer card information, retailers are particularly vulnerable to attack. Data-at-rest encryption could enhance security in these instances, providing an additional layer of security between customer records and the attacker The advanced threats retailers face can often evade security defences without detection. Such a breach could grant attackers unrestricted access to sensitive information for possibly months – some breaches are known to have been detected only after consumer payment details appeared on the dark web. These types of undetected attacks are highly dangerous for retailers, which are relatively helpless to protect consumer information once their defences have been compromised. Data-at-rest encryption could significantly enhance security in these instances, providing an additional layer of security between customer records and the attacker which has the potential to make the stolen data valueless to cyber criminals. Industries in need of data-at-rest encryption Healthcare organisations, which hold highly sensitive customer and patient information, have a strong use case for data-at-rest encryption. With the widespread adoption of electronic patient health records, that data is increasingly more vulnerable to attack. Recent research from the American Medical Association and Accenture revealed that 74% of physicians are concerned over future attacks that may compromise patient records. With the widespread adoption of electronic patient health records, that data is increasingly more vulnerable to attack The financial sector would also benefit from further investment in data-at-rest encryption, given 78% of financial services firms globally are planning on increasing their spending on critical data, according to Thales’ Data Threat Report. It’s helpful to view security as a circle in which every piece of hardware and software handling the data plays its part SMEs and enterprises are not immune to security threats either – with growing numbers of people traveling for work or working remotely, the risk of sensitive business data becoming exposed via device theft is heightened. Usernames and passwords have little use if thieves can simply remove unencrypted hard drives and copy data across. Securing every hardware and software Technology vendors often focus on aspects of hardware and application security that are within their control. This is understandable, but it risks proliferating a siloed approach to data security. There is no single line for data security -- rather, it’s helpful to view it as a circle in which every piece of hardware and software handling the data plays its part. There’s a clear need for more industry dialogue and collaboration to ensure data security is effectively deployed and connected throughout the security circle and across the value chain.

The use of facial recognition has become a highly debated topic recently, and has increasingly and misleadingly been criticised by some for being an unethical tool used to spy on the public. The reason for such criticism is however largely due to lack of information and regulation around the technology. Used proportionately and responsibly, facial recognition can and should be a force for good. It has the ability to do a lot more to increase security in the future – from street crime to airport security, all the way through to helping those battling addiction, the technology can take security and operations to new heights. The rise in knife crime Knife crime has dominated the headlines in the UK throughout the year. Recent statistics show the number of people being admitted to emergency care due to attacks by a sharp object to be up by nearly 40 per cent from two years ago, whilst the number of children under the age of 18 being admitted to hospitals with stab wounds is up by 86 per cent in only four years. This recent surge in knife crime has put police forces under immense pressure, and the intelligent use of facial recognition has a role to play in enabling more informed stop & search interventions. Currently UK police can stop and search an individual they suspect to be carrying drugs or weapons or both, or they can stop and search a person in a location where there have been or are considered likely to be “incidents involving serious violence.” In both cases they must do so with access to limited information, leaving themselves open to accusations of bias or discrimination. Knife crime dominated the headlines in the UK throughout 2018 Police systems benefiting crime investigations This is where facial recognition can offer up additional intelligence. These systems can memorise the faces of persons of interest, networks of gang members, wanted criminals and those suspected of involvement in serious violent crimes. Furthermore, these systems don’t need prior personal engagement to recognise an individual and see only data, not gender, age or race.  The technology doesn’t take the decision away from the human police officer. However, it does bring greater transparency and context to the decision-making process of whether a stop and search intervention is justified.  Similarly, the advanced technology can recognise and match an individual seen on a CCTV camera at a crime scene to someone the police encounters on the streets some time later, justifying a stop and search on that individual. Its ability to check in real time if a person is on a criminal watchlist adds an extra layer to the decision-making process prior to conducting a stop and search, lowering the likelihood of discrimination. Facial recognition thus helps eliminate both weapons and criminals off the streets and potentially prevent crimes before they have a chance to take place. Gambling addiction and how facial recognition can help There are an estimated 593,000 people in the UK currently battling a gambling problem, making it a serious public health issue in the country. Having understood the gravity of the issue, the UK gambling commission have set limits and advice in place to help those suffering this addiction; yet as with all addictions, gambling is a tough habit to beat. In order to put effective limitations in place and make a real difference, the gambling commission needs the right technology to protect those most vulnerable in the industry.   Facial recognition technology is able to keep track of customers and thus help gambling companies in protecting their customers   Facial recognition technology is able to keep track of customers and thus help gambling companies in protecting their customers to a higher degree. Monitoring those entering and moving around gambling areas is an extremely difficult task for human staff to do alone, especially in large crowded areas such as casinos. Facial recognition technology installed around the premises would be able to help the company and the staff to identify people who have registered as gambling addicts, and keep record of their day’s play in order to inform staff if and when it was time for them to stop. It would also be able to ensure effective self-exclusion procedures, by identifying a self-excluded individual via CCTV as soon as they entered the venue to then allow security staff to respectfully escort them out. Utilising facial recognition at airport security Facial recognition has by now become a normal sight at many airports around the world. Several people today hold a so-called biometric passport, which allows them to skip the normally longer queues and instead walk through an automated ePassport control to proceed to the gate faster without having to deal with control officers. Facial recognition used in this way has managed to significantly cut waiting times at the passport control, but it also has the ability to enhance security in and around airports. Facial recognition uses algorithms to match physical characteristics against photos and videos of people's faces Earlier this year, facial recognition technology managed to catch an imposter trying to enter the US at the Washington Dulles Airport. The false passport may have been uncaught by the human eye, yet due to the accuracy of the facial recognition technology it managed to help officers catch the imposter and bring him to justice. Facial recognition thus allows officers to identify an individual faster and more accurately than the human eye. Facial recognition uses algorithms to match physical characteristics against photos and videos of people's faces, which have been collected from visas, passports and other sources.   Facial recognition allows officers to identify an individual faster and more accurately than the human eye Whilst some critics may worry about issues of privacy related to the technology, at airports the use of facial recognition has proved to both enhance security as well as speed up processes such as check-in and, in the future, even boarding proceedings. At airports the use of facial recognition has proved to both enhance security as well as speed up processes such as check-in If used correctly and proportionately, facial recognition can help safeguard the public and improve national security on several fronts. Whilst the many benefits of facial recognition are evident, the lack of regulation and understanding of the technology has led to misconception around how it works and what it is used for. Facial recognition technology can match faces in crowded public places against criminal watch lists, and register faces that match with those on criminal watch lists – whilst ignoring everyone else.

Terry Gold of D6 Research has been giving “cyber in physical security” presentations at a variety of conferences, including ISC West and the Cyber:Secured Forum. We caught up with him for some insights about the intersection of cybersecurity and physical security. Q: Tell us a little bit about your background, specifically in the context of its relevance to cyber security in physical access. Gold: I started out in information security and then got involved in physical security along the way. I started really focusing on physical from a cyber standpoint about 10 years ago. I got into ethical hacking about 8 years ago, and then worked on putting it all together. There wasn’t a roadmap, so I had to build a methodology which I now share with other hackers, end users and law enforcement. I spend all my time either in the lab building success models, methods, and testing them out in some of the largest customers or agencies in the world for validation and improvement. Also, a chunk of my time is spent re-engineering security assessment and controls for end users or validating vendors on their behalf from a unique viewpoint that’s not (yet) typical in the industry.  Q: How well prepared is physical security overall against cyber threats? Gold: Not well at all. While security is imperfect anywhere, much of the practices and designs have critical defects and overlook either best practice or fundamental application security principles. I’d say that the industry is very wide open for exploitation that doesn’t take much sophistication to execute. Breach disclosure laws are focused on mandatory reporting for personally identifiable information (PII)  Q: What things stand out to you along your journey regarding the changes that you are seeing on this topic? Gold: Culture. Over the years, the industry (and most end users) have been dismissive of my findings. Industry culture hasn’t been aligned to embrace the topic and make requisite improvements that are needed to achieve “good security.” However, I’m finally starting to see that change – quickly and at scale. It doesn’t mean that we’re close to “good,” but rather reached the inflection point of change – and I’m rather pleased about it.    Breach disclosure laws has resulted in IT getting a lot of media attention in comparison to hacks made against physical security    Q: D6 does a lot of research in this area. What is the analysis behind the recent push for cyber security in physical security? Gold: First, it must be recognised that the threat isn’t new, but rather that the industry is only now coming to the table on it. Industry sentiment has been that breaches in physical security don’t happen or that there’s little impact.It must be recognised that the threat isn’t new, but rather that the industry is only now coming to the table on it Both are false. Mainly, IT gets all the media attention with breaches for two reasons; 1) breach disclosure laws are focused on mandatory reporting for personally identifiable information (PII), and 2) there is really poor detection (mostly non-existent) against hacks in physical security, so they go unrecognised.  On the other side, as physical security systems increasingly resemble an IT architecture, so does their risk profile. As it expands to mobile, cloud, IOT and intelligence - InfoSec and auditors are taking a look and are alarmed at what they’re seeing. Before you know it, the scrutiny is cutting pretty deep, pressure for alignment becomes intense, and vendors feel the pinch on the sales cycles. It’s not a comfortable position for anyone.   Q: What will be the projected impact? Are practitioners seeing the whole picture? Gold: No, and this area is probably the most important takeaway of this interview. The industry is where InfoSec was about 15 years ago in their journey, except we have an additional headwind to deal with – culture change. This industry tends to rely more on trusted relationships than validating the recommendations are being provided. There are too many prevailing misconceptions, that unless remediated, investments won’t be as effective as expected.   Q: What do you believe are the top misconceptions? Gold: Well, this is a longer topic, but here’s a sampling that cuts across different areas.   Regarding hackers: A misconception is that they’re generally not interested. Hackers are increasingly very interested. When I teach a workshop at a hacker conference, it’s usually the quickest to fill up and go to wait list (within a couple hours). Regarding attacks: A misconception is that attacks are executed directly against the target system. Example, their goal is to get into VMS and attack it directly. The reality is that they’re more commonly dynamic where physical is part of a larger attack and its role is an easier gateway to another system (or vice versa, with many hops). Regarding protective measures. The most prevalent mistake that the industry is currently making is too much focus and reliance on air-gapping networks or locking ports. This is only a slice of the attack surface and there are various ways to get around it. There’s a heavy price to pay for those that that rely too much on this strategy since its often accompanied by few mechanisms to deal with actors once they do get in (and they definitely will). Regarding the value of exploiting physical security. Too often perceived as low value. In our white paper we review many of the things that hackers can do, what they gain, and how it can impact the overall organisation. It’s far broader and deeper than most.  Q: What are the top things that need to change in the industry? Gold: First, culture. This can be answered by adopting the same principles as InfoSec. From an execution standpoint, the industry needs to change how they perform risk assessments.At D6, we’ve developed a stepwise methodology from ground up and it’s a huge difference Industry practices, including certifications, are significantly outdated and don’t reflect a methodology that accurately considers cybersecurity, actors, methods, and proactive remedy. At D6, we’ve developed a stepwise methodology from ground up and it’s a huge difference. End users that don’t re-engineer their practice, will be very limited for meaningful cybersecurity improvement.  One of the changes needed in the industry includes how risk assessments are performed   Q: Generally, what advice do you give to clients on steps to move their cyber security to the next level?  Gold: Don’t operate like a silo anymore. Transition from industry “common practices” to best practices that can be validated. Rely less on previous relationships and more toward domain competence. Collaborate with the CISO to a principled, goal-oriented and metrics-based approach. Embed an InfoSec person on the physical team. Present priorities and risks jointly to the board within an overall risk portfolio. Invite scrutiny from auditors. Get a red team performed once a year. Until you do the last step, you don’t really know where you stand (but don’t do it until the other things are done). Last, set the bar higher with vendors to support these improvements or their products will just end up being weak link.  Q: What type of challenges do you see and any advice on how end user and integrators can overcome them? Lessons learned? Gold: There are too many specific domains across cybersecurity – it’s not just a network security resourceFeedback I get from integrators is that they’re struggling to figure out how to deliver expertise to their clients in their area. They’re somewhat overwhelmed with the complexity, becoming an expert or how expensive it is to hire and maintain those skilled resources. My best advice is not to do either. There are too many specific domains across cybersecurity – it’s not just a network security resource. Not even the large integrators have the right bench, and unfortunately, they’re just further down a doomed path than smaller integrators. Form a partnership with boutique cybersecurity firms that have multiple specialists. Negotiate rates, margins, scope, and call on them when needed. It won’t come out of your bottom line, the results will be better, and the risk will be extremely low. You’ll learn along the way too.   Q: Anything notable that your research is uncovering in this area that might not be on people’s radar yet? Gold: Yes, quite a bit. Our Annual Industry Assessment Report goes through every segment. We’re making pretty bold statements about the future and impact, but we’re confident. One thing that stands out is how intelligence (and the swath of subsets) will impose stringent demands on physical security due to attribute and data collection (for analysis) which will absolutely require privacy compliance, integrity, and controls. It will even shape organisations that might not care about cybersecurity but are prioritising function.  Q: Where can readers learn more about your perspectives on this topic? Gold: Blogs on the D6research.com website. Our annual report. Val Thomas of Securicon and D6 have collaborated on a three-part cybersecurity in physical white paper series. It goes into all of this in detail, as well as remedy.

MOBOTIX AG has developed the M16 EST Thermal Camera as a special thermal solution for the for zero-contact detection of temperature fluctuations of the body surface (EST: Elevated Surface Temperature). The M16 EST thermal camera complies with the specifications of the U.S. Food and Drug Administration (FDA), which enables and enforces its use and distribution in the United States. The thermal solution precisely satisfies the requirements of the COVID-19 Emergency Use Authorization (EUA) by the FDA's enforcement policy for tele-thermographic systems. This means that the MOBOTIX M16 EST solution can be utilised by following FDA regulations for determining body temperature within the duration of the public health emergency that was declared by the Secretary of Health and Human Services (HHS). Thermal camera solution Examples of suitable locations for this solution include, but are not limited to: healthcare facilities, schools, government institutions and retail environments. Meeting FDA requirements under the emergency order is an essential step for MOBOTIX sales in the growing US market. However, utilisation of the MOBOTIX M16 EST solution within the healthcare sector in countries outside the US may require further product releases and approvals to satisfy the specific needs of various national laws. Regardless, with all FDA specifications met, the highly-esteemed German manufacturing quality within this professional thermal solution will undoubtedly extend into other countries and markets. The measurement system, which complies with FDA specifications, consists of two components, the MOBOTIX M16 EST thermal camera, and a black body radiator. The black body radiator is used to create an area with a reference temperature for the MOBOTIX M16 EST thermal camera. Recording body temperature Recording body temperature with the MOBOTIX M16 EST thermal camera is an effective tool for risk detection Non-contact temperature detection is used primarily by healthcare professionals to screen and potentially identify (COVID-19) infected people. The thermal camera solution can be used in healthcare facilities or non-medical areas, such as airports or building access gates. Recording body temperature with the MOBOTIX M16 EST thermal camera is an effective tool for risk detection. Of course, the MOBOTIX solution should not be used exclusively or primarily for diagnosing or ruling out COVID-19 as well as any other disease. Elevated body temperatures associated with the use of this solution should always be confirmed with secondary evaluation methods such as non-contact infrared thermometer (NCIT) or clinical grade contact thermometer. The MOBOTIX M16 EST thermal camera should only be used to record a single person's temperature at a time. Reference body temperature The distance between the person and the camera must be the same as the distance between the person and the black body radiator. The MOBOTIX M16 EST thermal camera measures the difference between the reference temperature of the calibrated black body radiator and the temperature of the hottest point within the measuring range of the uncovered face of a person. Usually, this is the inner canthus (tear duct) of the eye.

Since the beginning of the Corona pandemic, MOBOTIX thermal cameras have been increasingly used in the healthcare sector, as well as airports, train stations, public authorities, and companies, to detect temperature anomalies in people without contact and thus contain the spread of the virus. However, this aspect is only one area for which MOBOTIX technology is currently providing special services. The MOBOTIX 7 Platform, with its intelligent and cyber secure camera systems M73 and S74, predestined MOBOTIX video technology even before the pandemic to ensure comprehensive, digital support in healthcare clinics and the care of the elderly and disabled. The reliable, high-quality video systems made in Germany reduce hospital and nursing staff's workload, provide digital care for patients and residents, and optimise care and workflow processes. Parking lot management Basic safety and pandemic protection in healthcare Also, during the pandemic, a special duty of care applies to employees, patients, and residents as a risk or high-risk group. MOBOTIX video technology is used in numerous clinics, retirement, and care facilities worldwide to ensure that patients, residents, and employees have a carefree stay and can work safely. Dangers and sources of risk are detected, and the intelligent systems warn, report, or directly initiate assistance and rescue measures. With the MOBOTIX 7 platform and the versatile apps, MOBOTIX offers exceptional application possibilities This allows staff to concentrate on their work, while hospital patients and nursing home residents can recover more quickly and get the rest they need. MOBOTIX video technology is also used for early fire detection and access control, mainly to protect sensitive areas such as sterile rooms, operating theatres, or medication depots. MOBOTIX also offers the right solutions for intrusion and theft protection, securing outdoor spaces, or access monitoring and parking lot management. With the MOBOTIX 7 platform and the versatile apps, MOBOTIX offers exceptional application possibilities: Temperature-sensitive people are detected as soon as they enter the facility and can be immediately sent for further examination. Crowding is avoided, and social distancing can be supported. MOBOTIX video systems detect when no mask is being worn and trigger an alarm or an information announcement. Cyber security and data protection Cyber security and data protection "Made in Germany” Particularly in the healthcare sector, cyber security and data protection must be given the highest priority. After all, it is a matter of protecting lives. But it is also about sensitive, personal data that must not fall into the wrong hands under any circumstances. MOBOTIX video systems consist of high-quality components. Developed, produced, and comprehensively tested at the company's German headquarters in Langmeil/Rhineland-Palatinate, the company creates products and solutions that are impressive not only because of their outstanding image quality - even in the most challenging lighting conditions. One hundred percent DSGV-compliant, the decentralised MOBOTIX systems stand for the highest possible cyber security and comprehensive data protection. Unauthorised persons cannot read the stored data. Intelligent video technology Relieving the workload of hospital and nursing staff with "digital care” Using intelligent video technology from MOBOTIX can significantly reduce the hospital and nursing staff's workload Hospital and nursing staff often work at the breaking point. Using intelligent video technology from MOBOTIX can significantly reduce the hospital and nursing staff's workload. For example, adequate video support can be used to carry out control rounds digitally. On the one hand, this creates free space that can be used for personal care and nursing, while on the other hand, emergencies are reported directly at the time they occur - and thus, the staff does not lose critical time. Effective signaling and calling systems targeted alarm differentiation, and the avoidance of false alarms keep staff motivation high and reduce alarm fatigue. Incorporating audio systems Digital and discreet care for patients and those in need of care MOBOTIX provides discreet video support for round-the-clock security without anyone feeling they are being watched. The video surveillance systems in healthcare facilities are discreetly and unobtrusively installed; they also detect and alert only when defined events occur to keep recordings to a minimum. At the same time, patients and residents can be sure that help will arrive quickly in an emergency. Even at night, helpless individuals are detected immediately, ensuring their safety and preserving their independence. By incorporating audio systems, MOBOTIX video solutions for healthcare also enable patients to be addressed and communicated directly with. Licence plate recognition Optimise hospital and care processes Smooth organisation of routines helps hospitals and retirement and care facilities be efficient and profitable Smooth organisation of important routines helps hospitals and retirement and care facilities be efficient and profitable. Numerous processes can be automated and optimised with MOBOTIX video technology, from the facility's journey to check-out. For example, professional parking management with licence plate recognition can ensure that only authorised vehicles can access specified areas. In this way, ambulance access routes can be kept free, or parking fees can be billed in a straightforward, fast, and accurate manner. Queues in registration or examination areas can be avoided, and smooth administration and medical and care areas can be enabled. University hospitals or teaching institutions can use high-resolution camera systems, e.g., in operating theaters, to fulfill their teaching and training mission without disruptions. Customers can develop further apps that enable completely individual solutions themselves or have them created by MOBOTIX and its technology partners and certified concerning cyber security. Advanced video technology Comprehensive solutions with the best return on investment Healthcare is a market that is extremely important to MOBOTIX. The high level of solution expertise digitises processes and work steps in everyday hospital and home life, using intelligent and future-proof video technology. Thus, simplifying work and making it safer also relieves the healthcare budgets' pressure and increases profitability (ROI).

With the new MOBOTIX S74 video system, Konica Minolta is significantly expanding the usage options for Intelligent Video Solutions delivered using its MOBOTIX 7 platform. The new model is a high-performance IoT camera featuring up to four different types of sensor (two visual, one thermal and one movement/sound), which allows for more flexibility than any other MOBOTIX video system. Exceptionally discreet thanks to its concealed camera housing, the S74 can also access camera apps that have already been integrated, for almost indefinite expansion. This makes the video system universally suitable for any imaginable requirement in even the most diverse industrial applications. Identifying vehicles or people To supplement its already well-known 4K UHD modules in numerous lens opening angles, Konica Minolta is presenting a real world-first with the MOBOTIX S74: The Ultra LowLight 4MP Day & Night sensor module with automatic day/night switching. The Ultra LowLight technology can produce brilliant images with faithfully reproduced colours, even in low-light conditions. This is an important feature for applications such as identifying vehicles or people, even in the darkest of areas. The excellent signal-to-noise ratio of 0.19 demonstrates the impressive brilliance of the Ultra LowLight sensors The modules also have shorter exposure times, significantly increasing the sharpness of the object moving through the twilight image. The excellent signal-to-noise ratio (SRV) of 0.19 demonstrates the impressive brilliance of the Ultra LowLight sensors. That corresponds to a light sensitivity that is four-times higher than a 4K UHD module. The camera also has potent backlighting technology. VGA thermal technology Thanks to the optimised Wide Dynamic Range (WDR) function, all MOBOTIX 7 generation cameras can easily cope with challenging light conditions. WDR simultaneously combines different images with different exposure times into one image, automatically brightening areas that are too dark and preventing areas that are too bright. The result is a more accurate, detailed image in all areas. The excellent image quality also applies in thermal applications. With VGA thermal technology and an extended image angle of up to 90° x 69°, even the smallest details can be recognised. Large areas (perimeter protection) and temperature differences can also be captured from great distances. The S74 integrates perfectly into the open MOBOTIX 7 platform, which offers a wide range of MOBOTIX Certified Apps based on Artificial Intelligence and Deep Learning to support security and workflow processes. Specific use cases Customers can use existing apps from the platform instead of installing apps in their own infrastructure, which they would have to manage and continuously update. The pre-installed apps can be trialled free of charge for 30 days and then activated individually using a licence, if this is required. However, customers can also develop their own apps for specific use cases and these can be integrated into the open platform. This means they can create "their own" camera to fulfil their specific requirements - giving them the full flexibility and modularity they need. In this way, new camera app solutions are continually being created with unlimited possibilities. Only high-quality professional market and partner solutions are integrated, tested, and certified by MOBOTIX to meet the high demands of quality and cyber security. Additional network cameras The S74 video system exclusively consists of rugged, high-quality components, which are made in Germany As image processors and storage are embedded within the IoT camera and the camera operates completely autonomously, there is no extra hardware or software such as servers or recording systems - only the camera itself is required. This intelligent video solution therefore enables customers to reduce server load and storage volume, lowering both capital and operating costs. If the system is expanded with additional network cameras, only additional storage is required. Robustness, reliability, and data security are also core values in the S74. The S74 video system exclusively consists of rugged, high-quality components, which are made in Germany. The camera housing is made of powder-coated aluminium and features weatherproof USB-C sockets. The S74 also provides end-to-end protection against cyber-attacks by hackers and prevents unauthorised entry into the company's network. AI-supported video technology Gary Fletcher-Moore, Head of Sales - Intelligent Video Solutions at Konica Minolta Business Solutions (UK) Ltd states, “With the MOBOTIX S74, we are setting new standards in AI-supported video technology. The system will impress customers thanks to its performance, image quality, robustness and cyber security.”