Hikvision installation guide - 8-inch IR Speed Dome camera

Hikvision installation guide - 8-inch IR Speed Dome camera

The 8-inch Speed Dome Installation Guide gives step-by-step instructions on how to go about assembling all the parts of the camera together. The camera parts include lens, headcover, bracket, pendant adapter, screw pack and allen wrench. The tools required for the task include the quick start guide, anti-static gloves and thread seal tape.

Steps for installation of the 8-inch IR Speed Dome Camera are –

  • Open the memory card cover and insert the memory card, (Optional Step)
  • Route the cables through the bracket,
  • Secure the expansion bolts into the wall in advance according to the hole positions on the bracket,
  • Secure the bracket into the wall,
  • Tighten the set nuts,
  • Install the headcover to the bracket,
  • Tighten the set screw,
  • Hook the camera to the head cover,
  • Connect the safety rope,
  • Connect the power cable and network cable,
  • Protect the power supply and network cable with waterproof tapes,
  • Tidy the cables and place them in the head cover,
  • Secure the dome to the head cover and tighten the set screws,
  • Remove the handle from the safety rope,
  • Remove the protective film on the IR lamps,
  • Installation completed