Sorry no products match your search. Your search criteria may have been too narrow. If you remove some of your search criteria, this may yield more productive results.

Power supplies & batteries - Expert commentary

Key-centric access management system: providing the highest possible levels of security
Key-centric access management system: providing the highest possible levels of security

In daily work and life, various locks have always played the role of protecting asset safety. In different usage scenarios, the most appropriate lock must be selected to maximise benefits. In the past applications, the difficulties encountered by managers are as follows. Unlocking authority is difficult to control, unclear access records, emergency unlocking, and troublesome upgrade and installation. Through the following points, how the key-centric access management system solves such problems. Access management system The key-centric access management system, also known as intelligent passive electronic lock system, which is based on three elements: electronic keys, electronic cylinders and management software, can provide powerful and traceable access control. Each smart key is unique and cannot be copied, and in the event of loss or theft, these keys can be quickly disabled. Each smart key is unique and cannot be copied, and in the event of loss or theft, these keys can be disabledIn the process of using traditional mechanical locks, it is not difficult to find that it is quite complex to realise the access control of unlocking. The difficulty is that the keys can be copied at will, the use records are not clear, and the credibility of employees cannot be guaranteed... etc. For managers, this is a safety issue that cannot be ignored. Mechanical lock system And through the key-centric access management system, we can accurately assign access authority for each user, and set different access authority for locks in different areas. For example, we can set the XX user to have access to the archive room (A) from 10:00 on May 1, 2021 to 17:00 on June 1, 2021, within this time range. Outside this time range, there will be no unlock authority. The flexibility of the traditional mechanical lock system is insufficient. There is no clear record to determine who entered the area. It is usually a simple paper record that records the unlocking records of the employees. The authenticity and validity of the system need to be examined. In the key-centric access management system, when an employee unlocks the lock, the unlock record will be synchronised to the management terminal. Remote authorised unlocking With the key-centric access management system, remote authorised unlocking can be realised Through secondary records, managers can easily track employees and supervise employees' visits to each area. In daily work, there are often emergencies that require temporary visits to certain specific areas. If you encounter a situation where the distance is extremely long, and you don’t have the key to that area, you can imagine how bad this is. The process of fetching the keys back and forth is time-consuming and laborious. With the key-centric access management system, remote authorised unlocking can be realised. You can apply for the unlocking authority through the mobile APP, or you can temporarily issue the unlocking authority for the area on the management terminal, which saves time and effort. When faced with the failure of ordinary mechanical locks to meet management needs, some managers can already think of upgrading their management system, that is, the intelligent access control system. Passive electronic locks But before making this decision, the manager will inevitably consider the various costs brought about by the upgrade, including installation costs (cable cost), learning costs, and maintenance costs. Since most of the universal intelligent access control systems on the market require wiring and power supply, the cost of transformation and upgrading is quite high for managers who have such a huge amount of engineering. The key-centric access management system is the ‘gospel’ for managers. Since passive electronic locks and ordinary mechanical locks have the same size, they can be directly retrofitted to existing hardware, and they can be replaced step by step simply and easily. At present, the key-centric access management system is being known and applied by more and more managers and enterprises. Application industries include, such as power utilities, water utilities, public security, telecommunication industry, transportation, etc.

Wire-free, mobile first and data rich? The future of access control is within almost anyone’s reach
Wire-free, mobile first and data rich? The future of access control is within almost anyone’s reach

The 2020s will be a wireless decade in access control, says Russell Wagstaff from ASSA ABLOY Opening Solutions EMEA. He examines the trends data, and looks beyond mobile keys to brand new security roles for the smartphone. The benefits of wire-free electronic access control are well rehearsed. They are also more relevant than ever. A wireless solution gives facility managers deeper, more flexible control over who should have access, where and when, because installing, operating and integrating them is easier and less expensive than wiring more doors. Battery powered locks Many procurement teams are now aware of these cost advantages, but perhaps not their scale. Research for an ASSA ABLOY Opening Solutions (AAOS) benchmarking exercise found installation stage to be the largest contributor to cost reduction. Comparing a typical installation of battery-powered Aperio locks versus wired locks at the same scale, the research projected an 80% saving in installers’ labour costs for customers who go cable-free. Battery powered locks all consume much less energy than traditional wired locks Operating costs are also lower for wireless: Battery powered locks all consume much less energy than traditional wired locks, which normally work via magnets connected permanently to electricity. Wireless locks only ‘wake up’ when presented with a credential for which they must make an access decision. AAOS estimated a 70% saving in energy use over a comparable lock’s lifetime. Find out more about wireless access control at ASSA ABLOY's upcoming 29th June webinar Deploying wireless locks In short, every time a business chooses a wireless lock rather than a wired door, they benefit from both installation and operating cost savings. A recent report from IFSEC Global, AAOS and Omdia reveals the extent to which the advantages of wireless are cutting through. Responses to a large survey of security professionals — end-users, installers, integrators and consultants serving large corporations and small- to medium-sized organisations in education, healthcare, industrial, commercial, infrastructure, retail, banking and other sectors — suggest almost four locations in ten (38%) have now deployed wireless locks as a part or the whole of their access solution. The corresponding data point from AAOS’s 2014 Report was 23%. Electronic access control Electronic access control is less dependent than ever on cabling Without doubt, electronic access control is less dependent than ever on cabling: Even after a year when many investments have been deferred or curtailed, the data reveals fast-growing adoption of wireless locks, technologies and systems. Is mobile access control — based on digital credentials or ‘virtual keys’ stored on a smartphone — an ideal security technology for this wire-free future? In fact, the same report finds mobile access is growing fast right now. Among those surveyed, 26% of end-users already offer mobile compatibility; 39% plan to roll out mobile access within two years. Before the mid-2020s, around two-thirds of access systems will employ the smartphone in some way. The smartphone is also convenient for gathering system insights Driving rapid adoption What is driving such rapid adoption? The convenience benefits for everyday users are obvious — witness the mobile boom in banking and payments, travel or event ticketing, transport, food delivery and countless more areas of modern life. Access control is a natural fit. If you have your phone, you are already carrying your keys: What could be easier? IBM forecasts that 1.87 billion people globally will be mobile workers by 2022 Less often discussed are the ways mobile management makes life easier for facility and security managers, too. Among those polled for the new Wireless Access Control Report, almost half (47%) agreed that ‘Mobile was more flexible than physical credentials, and 36% believe that mobile credentials make it easier to upgrade employee access rights at any time.’ IBM forecasts that 1.87 billion people globally will be mobile workers by 2022. Workers in every impacted sector require solutions which can get the job done from anywhere: Access management via smartphone offers this. Site management device The smartphone is also convenient for gathering system insights. For example, one new reporting and analytics tool for CLIQ key-based access control systems uses an app to collect, visualise and evaluate access data. Security system data could contribute to business success. The app’s clear, visual layout helps managers to instantly spot relevant trends, anomalies or patterns. It’s simple to export, to share insights across the business. Reinvented for learning — not just as a ‘key’ or site management device — the phone will help businesses make smarter, data-informed decisions. The smartphone will also play a major role in security — and everything else — for an exciting new generation of smart buildings. These buildings will derive their intelligence from interoperability. Over 90% of the report’s survey respondents highlighted the importance of integration across building functions including access control, CCTV, alarm and visitor management systems. Genuinely seamless integration They offer greater peace of mind than proprietary solutions which ‘lock you in’ for the long term Yet in practice, stumbling blocks remain on the road to deeper, genuinely seamless integration. More than a quarter of those polled felt held back by a lack of solutions developed to open standards. ‘Open standards are key for the momentum behind the shift towards system integration,’ notes the Report. As well as being more flexible, open solutions are better futureproofed. Shared standards ensure investments can be made today with confidence that hardware and firmware may be built on seamlessly in the future. They offer greater peace of mind than proprietary solutions which ‘lock you in’ for the long term. Open solutions and mobile management are critical to achieving the goals which end-users in every vertical are chasing: scalability, flexibility, sustainability, cost-efficiency and convenience.

Surge protection for security installations: 2017 saw increased investment
Surge protection for security installations: 2017 saw increased investment

In 2017, DITEK saw how power surges from the many natural disasters that took place damaged many businesses. In a natural disaster, or even everyday business operations, a facility’s entire investment in security, life safety and surveillance systems technology can be disabled or rendered useless in a few seconds. Surge protection solutions can mitigate those risks and protect security investments. Proactive approach to risk mitigation Throughout 2017, we also witnessed a change in how enterprises view surge protection, which included how investments are being made in surge protection to protect valuable security, life safety and surveillance systems, while also reducing downtime, manpower costs, liability vulnerabilities, and possibly compliance issues that can force businesses to actually cease operations. Effective security management is about mitigating risks. But risks cannot be mitigated without a proactive approach. Enterprises and integrators, who take the time to assess risk and to develop a strategy to incorporate effective detection, deter and response criteria to protect physical assets will be successful in 2018. 2018 and beyond That strategy includes designing surge protection into new security systems, while also adding surge protection to existing systems. Enterprises and security integrators who implement a surge protection strategy during security planning processes – or after – will be exercising prevention and mitigation, and they will be successful in 2018 and beyond.  Surge protection devices have an untapped potential for enterprise surveillance and security systems In 2017, Ditek continued to offer security end users a solid surge protection solution. We also successfully educated system integrators, who are seeking value-added products or services to incorporate into their portfolios, on the importance of surge protection devices. Educating security integrators We believe that surge protection devices have an untapped potential for enterprise video surveillance and security systems, because they can and do meet safety and security challenges that have been rarely identified in the past. We are looking forward to 2018, when we will continue to develop new surge protection products – including a new product engineered to protect up to twelve individual fuel dispensers, which is critical to the financial operation of convenience stores. We will also continue to educate security integrators about the importance of including surge protection in the design/build RFP, to not only secure an enterprise’s valuable security equipment, but also to help integrators to differentiate their capabilities and knowledge from the competition.

Latest Forward Vision CCTV Limited news

Forward Vision MIC1-series PTZ cameras keep crime and vehicles off the Bristol City streets
Forward Vision MIC1-series PTZ cameras keep crime and vehicles off the Bristol City streets

 Forward Vision MIC1 cameras helping to combat crime in BristolBristol is no different from any other major city in the UK in that it has to put up with its fair share of challenges, from inner-city crime through to congestion on its roads. In both cases, however, there is one product that is helping the City Council's teams to stay one step ahead of the game, a product noted for its reliability and flexibility even in the most demanding environments: the MIC1, or ‘Metal Mickey', series from Forward Vision, a member of the Bosch group.Bristol City Council first started using MIC1 cameras eight years ago in a city centre surveillance role, after the technology was recommended by a local installer, Select Electrics. Select had installed the fibre network infrastructure across the city and was the Council's principal contractor for the installation and maintenance of CCTV: "At the time, MIC1 cameras were seen as quite a radical design," explains Select Electric's managing director Ray Murphy, "and the Council needed to be convinced that it would give them the level of performance and reliability they needed." "It is a testimony to its quality that there are now more than 250 cameras from the MIC1 series deployed in Bristol, not only for security but also in a traffic management capacity. On sites where other manufacturers' technology is installed, these cameras are gradually being replaced with MIC1 cameras as budgets become available."Images from the cameras are transmitted to the City Council's award-winning control room in the council offices. The facility is both CCTV User Group Gold accredited as well as having a national accreditation for social alarm monitoring - one of the few councils in the UK to be so recognised. It has recently been granted funding for a new monitoring wall and matrix system that will allow access to all council, traffic, police and retail CCTV systems.The ‘Metal Mickey' is in essence everything you could possibly want from a CCTV camera," says Ray MurphyIn charge of the control room is manager Gordon McLanaghan: "We first trialled one of the cameras in 2000 and have never looked back," he explains. "They give us a level of flexibility and reliability that we need, and are sufficiently robust to operate in a number of challenging environments. They are also ‘plug and play' which is excellent from an installation and maintenance perspective, and if parts need to be replaced they can be changed with the minimum of downtime."The success of the cameras in a security surveillance capacity led the Council to look at MIC1 cameras for use in traffic management, managed through a dedicated urban traffic control room: "The cameras used across the city - whether for traffic management or city centre surveillance - can be viewed in either control room," Gordon McLanaghan says. "Recently, my colleagues in traffic secured funding to increase the number of cameras deployed, and because they could access the cameras we have already installed, they were able to extend their scheme quite dramatically. I recommended they use MIC1 cameras and after a trial against a range of competitor technology, they agreed that the MIC1s offered greater performance and better value for money." "The quality of images and the effectiveness of the zoom from each of the cameras is second to none," Gordon McLanaghan adds, "but there are also other advantages. It is easy to configure Automatic Number Plate Recognition (ANPR) functionality, for example, on any of the cameras, which gives us tremendous flexibility, and their design makes them unobtrusive and aesthetically better looking. We are replacing the old ‘shoebox' cameras with MIC1 cameras wherever we can as budgets become available. "The quality of images and the effectiveness of the zoom from each of the cameras is second to none," says Gordon McLanaghan"The ‘Metal Mickey' is in essence everything you could possibly want from a CCTV camera." A further advantage is the use of brushless motor technology as Select Electrics' Ray Murphy concludes: "The use of brushless motors further improves what is already a brilliant performance. The ‘Metal Mickey' has effectively become the benchmark that every other manufacturer aspires to and with further investment now as part of the Bosch brand, the quality is likely to get better still."The latest MIC1 cameras to be installed in Bristol are units from the MIC1-400 aluminium and MIC1-400 infrared ranges. Both are rated to IP68 for the ultimate in environmental protection, come with a choice of 18x or 36x true day/night camera modules and offer extremely flexible mounting options. The MIC1-400 infrared range benefits from built in infrared illuminators providing over 55 metres of illumination at night.

Derwent launches campaign to light up dark winter nights
Derwent launches campaign to light up dark winter nights

Derwent Illumination will be showcased at Bosch's Technology DaysWith the earlier onset of dark winter nights, security lighting specialist Derwent, a member of the Bosch Group, has launched a new campaign to encourage security professionals to review the performance of their security systems after dark. With the majority of crimes taking place at night, many CCTV installations that work perfectly well in the day can be compromised in low light and no-light conditions. And with winter nights starting as early as 4pm, it means that many systems are ineffective for up to 16 hours out of 24."Today's security systems demand 24/7 effectiveness and relying on ambient lighting is not enough," says Peter Beare, Managing Director of Derwent. "Without specialist security lighting, dark night time scenes will remain dark to CCTV cameras, and the images they capture will suffer from shadows, signal noise and loss of focus." As part of its campaign, Derwent has produced a free Dark Nights Information Pack and will provide free lighting surveys of existing and planned installation sites throughout the winter months."Many CCTV cameras installed during the light summer months will fail when they come up against the challenges of dark winter conditions," Peter continues. "Adding specialist illumination to an existing system can bring it alive again, ensuring it delivers high-resolution surveillance on a true 24 hour-basis."Bosch's recent acquisition of the Extreme Group, which includes Derwent and Forward Vision, means that security professionals have greater access to a wider portfolio of surveillance systems, according to Peter. "The integration of Bosch's proven Dinion camera range with our own award-winning Derwent Illumination is a powerful combination," he says. In addition to the Dark Night Information Pack and Lighting Surveys, Derwent Illumination will be showcased at Bosch's Technology Days, with events still to be held on the following days:2nd December - Curraheen Park Greyhound Racing, Cork4th December - Camac Valley, Dublin, Ireland

Bosch reveal  2008 Technology Day schedule
Bosch reveal 2008 Technology Day schedule

 Bosch LIVE cameras shoots-out with Derwent and Forward Vision part of Bosch Group Following the successful integration of Bosch Security Systems and the Extreme CCTV Group, a winter schedule of Technology Days has been announced, which this year has been extended to incorporate more locations across the country.These Bosch Technology Days, targeted at security consultants, installers and end users, are a development of the Bosch Camera Shootouts.  However, this year Bosch will be demonstrating the capabilities of its extended range of products, from CCTV cameras to infrared and white light security, along with focusing on the full potential of integrated solutions that Bosch now offers.  The schedule is as follows:17th November - London Zoo20th November - Celtic Manor, Cardiff 24th November - St John's Hotel, Solihull 27th November - Walton Hall Golf Club, Warrington2nd December - Curraheen Park Greyhound Racing, Cork, Ireland4th December - Camac Valley, Dublin, IrelandCommenting on the Technology Days, Paul Wong, Managing Director of Bosch Security Systems said: "The locations for each event have been carefully selected to offer the ideal environment and with light levels dropping as early as 4pm the technology will be thoroughly tested."The Bosch Technology Days will be complementing the Derwent's Dark Nights campaign, which is highlighting the importance of illumination and the importance of reviewing the effectiveness of security systems at night.For more information or to book your place please email Christine Cooper.