RedVision CCTV Power supplies & batteries(3)
Browse CCTV Power supplies & batteries
Power supply & battery products updated recently
In 2017, DITEK saw how power surges from the many natural disasters that took place damaged many businesses. In a natural disaster, or even everyday business operations, a facility’s entire investment in security, life safety and surveillance systems technology can be disabled or rendered useless in a few seconds. Surge protection solutions can mitigate those risks and protect security investments. Proactive approach to risk mitigation Throughout 2017, we also witnessed a change in how enterprises view surge protection, which included how investments are being made in surge protection to protect valuable security, life safety and surveillance systems, while also reducing downtime, manpower costs, liability vulnerabilities, and possibly compliance issues that can force businesses to actually cease operations. Effective security management is about mitigating risks. But risks cannot be mitigated without a proactive approach. Enterprises and integrators, who take the time to assess risk and to develop a strategy to incorporate effective detection, deter and response criteria to protect physical assets will be successful in 2018. 2018 and beyond That strategy includes designing surge protection into new security systems, while also adding surge protection to existing systems. Enterprises and security integrators who implement a surge protection strategy during security planning processes – or after – will be exercising prevention and mitigation, and they will be successful in 2018 and beyond. Surge protection devices have an untapped potential for enterprise surveillance and security systems In 2017, Ditek continued to offer security end users a solid surge protection solution. We also successfully educated system integrators, who are seeking value-added products or services to incorporate into their portfolios, on the importance of surge protection devices. Educating security integrators We believe that surge protection devices have an untapped potential for enterprise video surveillance and security systems, because they can and do meet safety and security challenges that have been rarely identified in the past. We are looking forward to 2018, when we will continue to develop new surge protection products – including a new product engineered to protect up to twelve individual fuel dispensers, which is critical to the financial operation of convenience stores. We will also continue to educate security integrators about the importance of including surge protection in the design/build RFP, to not only secure an enterprise’s valuable security equipment, but also to help integrators to differentiate their capabilities and knowledge from the competition.
The security market in 2016 saw an uptick in the economy, the introduction of new technologies, increased compliance requirements in key verticals, and rising concerns over the need for greater security. Users interested in upgrading or deploying new systems consistently chose networked system platforms. This trend further drove the demand for adaptive transmission solutions as a means of repurposing existing analogue infrastructure to accommodate IP devices on a networked platform. As this migration accelerated, product feature sets continued to evolve with the inclusion of advanced communications that let you monitor, control and report power/diagnostics from anywhere. These new products have also helped to stimulate new business opportunities for integrators by expanding their service offerings to include remote monitoring of these devices as a new source of recurring monthly revenue (RMR). PoE and adaptive transmission solutions In last year’s 2016 forecast, we discussed the integration trend and how PoE and adaptive transmission solutions with network communications were rapidly gaining traction and market share. As the year progressed, the trend increased with customers migrating towards systems that provided more data, faster transmission rates and more versatility, and accessibility anytime from anywhere. Altronix responded with more advanced product solutions. This growing trend makes it more critical than ever for the core power and transmission infrastructure that make up the foundation of these systems to include network communications for true integration. As effective and efficient as integrated IP systems have become, the cost to upgrade or install new networked systems can be prohibitive. In 2017, security professionals will require expanded options to capitalise on existing infrastructure while accommodating IP devices with new levels of performance. These new products will greatly reduce installation and maintenance costswhen deploying orupgrading systems We will see the introduction of new products that offer greater levels of integration with bundled capabilities such as PoE, network switches, versatile adaptive transmission capabilities to accommodate different types of cabling, greater bandwidth and speed, and management capabilities. These new products will greatly reduce installation and maintenance costs when deploying or upgrading systems. Altronix 2016 business overview Altronix’s evolution as a designer and manufacturer of versatile power supplies and accessories – and the addition of innovative PoE and adaptive transmission solutions with network communications – was significant in 2016. We have continued to deliver new products incorporating advances in power and communication technologies that solve real-world installation issues with the highest levels of performance and cost-efficiency. One of the most significant technologies contributing to our extensive portfolio of power and adaptive transmission products is our innovative LINQ™ Technology, which provides remote control of power, along with monitoring and reporting of diagnostics from anywhere you have internet access. LINQ completes the network communication cycle for networked systems by providing true integration for power supply and adaptive transmission products that are the foundation of every system. Altronix will continue to design, manufacture and introduce new power and adaptive transmission solutions in 2017 that live up to our longstanding reputation for outstanding quality, performance and reliability. See the full coverage of 2016/2017 Review and Forecast articles hereSave Save
IP/PoE systems eliminate the need for local power, thus saving installation costs Cost considerations are an important reason to use existing installed cable as part of a new system infrastructure. Extenders in the form of media converters can help. For almost three decades, video surveillance systems existed in the form of analogue systems. Video coaxial cable was the primary method of transmission with a limited distance of about 750 feet. Analogue systems required separate power supply located at each security camera site. Today, new technology often solves one problem and creates another. Internet Protocol/Power over Ethernet (IP/PoE) systems eliminate the need for local power supply, thus saving installation costs. The drawback is the restriction to only 328 feet and the required use of Cat 5e or above cable. Extended transmission distance So tens of thousands of video surveillance cameras are waiting to be converted to IP, and have been transmitting over coax at distances two-and-a-quarter-times greater than the Ethernet limit. The advent of extenders helps to solve this problem. In addition, the use of extenders for Cat cable and even single-pair alarm wire helps to add to the types of IP/PoE conversions while extending distance as far as three thousand feet. Tens of thousands of camerasare waiting to be converted to IP,and have been transmitting overcoax at distances two-and-a-quarter-times greater than theEthernet limit Considerations while using extenders Use of extenders requires taking several considerations into account. First and most important is a careful reading of specifications. A statement can be true while not applying to your applications. Let’s take IP/PoE transmission over coax as an example. A manufacturer’s product can state it has this feature and will meet your transmission requirement of X number of thousand feet. However, a careful reading reveals that achieving this requires RG 6 cable while you have RG 59 installed. You need to maintain a 100Mbps bandwidth and provide your cable with 12.95 watts of power. But as both bandwidth and power decrease with distances obtainable from many types of extensions, you realise that both are much less at the extended distance you require. In short, just depending on a product to make a simple specification statement is not enough when it comes to infrastructure considerations and especially with regards to extenders. Save Save
Redvision’s all-new, analogue X-SERIES, rugged dome uses Sony’s next-generation, 2MP, STARVIS sensor. It directly replaces the previous RVX30 analogue model and will be available to order under the same model number from November. “Many security-integrators consider Redvision’s X-SERIES™ to be the industry benchmark, rugged dome camera,” explained Paul Hucker, Director of Redvision. “With several analogue components being phased out by suppliers, we were under pressure to use a low-end camera solution in the RVX30 to maintain supply. Instead of compromising, we collaborated with Sony to use their STARVIS camera block; widely regarded as the best performing block on the market. Configured as a dome or PTZ An optically correct, flat window protects the camera, without compromising image quality" "Although this left us with a gap in supply, we felt it was a better option than compromising the quality of our brand. Installers will be impressed with the performance of the new RVX30. It has exceptional low-light capability, at 0.01 Lux in colour and 0.0015 Lux at night in mono, with an illumination distance of 150m using Infra-Red and 120m with white light. Like all X-SERIES™ cameras, it can be configured as a dome or PTZ using its removable cover, depending on bracket selection." "An optically correct, flat window protects the camera, without compromising image quality. An optional, silicone, long-life wiper removes rain and surface water, for optimal visibility in outdoor and challenging conditions.” Multiple alarm options The RVX30 series has 100 programmable pre-sets, 8 tours, 24 programmable privacy zones and multiple alarm options. Advanced pre-set and tour technology ensures the camera reaches pre-set positions correctly focused, with ideal light settings, following an alarm or during a tour. The RVX30 has an operating temperature range of -25º up to +60ºC. Mount options include pedestal, swan, wall and pendant, to suit all applications. The camera is marine plated before being finished in light grey or black as standard, or to order in any RAL colour. The X-SERIES is successfully used in many applications including public space, local authority, hazardous, marine, defence, high security, town centre and rapid deployment systems.
Redvision’s VEGA™ 2010, rugged camera housing includes a PoE-driven wiper option. The wiper removes rain and dirt from the housing’s camera window, ensuring a clear view, whatever the weather conditions. Not surprisingly, the wiper has made the VEGA™ 2010 the first-choice camera housing for outdoor and rugged camera installations in the UK, where wet weather is a reality. “We have many VEGA™ 2010’s fitted on top of CCTV towers, exposed to the elements”, explains Stephen Lightfoot, Technical Director of Redvision. Polycarbonate camera window and Visor Extension “A housing without a wiper is useless in exposed applications like these, as the inevitable rain, or a build-up of grime, will eventually compromise the camera view. Crime doesn’t stop when it rains, so installers must allow for it! We have also developed a tough, pedestal, mounting bracket for the VEGA™ 2010, which fits directly to the tower top.” “Like the wall bracket, it protects and hides cabling from the weather and possible vandal attack. Other modular options for the VEGA™ 2010 include a polycarbonate camera window and Visor Extension.” The VEGA™ 2010 is made from tough, die-cast aluminium, finished with a marine-grade plating, followed by a durable powder-coating. It is cable-managed, with an integral junction box. Wiring connections are made within the housing and brackets using ‘easy-connect’, cable terminals. This ensures the VEGA™ 2010 is IP67 weather-proof rated and IK10 impact rated for vandal-resistance. This makes it ideal for installations in tough and demanding environments and why it has been used in prison, marine, transport, industrial and many other public space applications already.
Redvision, the manufacturer of high-performance, rugged, CCTV cameras and housings, enhances its VMS1000™ open platform control system with a comprehensive range of new features. The VMS1000™ is a video management software and analytics solution, powered by Digifort, which is cost-effective, scalable, intuitive and server-based, with no annual maintenance fees. Standard analytics functionality Over 300 camera brands and 10,000 individual camera models are integrated with the VMS1000™" Stephen Lightfoot, technical director at Redvision, explains, “We have enhanced the capability of our VMS1000™, open-platform control system with a range of new features including object linking, for configuring a logical flow between cameras on screen; field of view direction depiction, for fixed cameras and PTZs on maps; edge playback, direct from supported cameras with SD cards; local MP4 recording options within the surveillance client, not just the server; privacy masking with user rights hierarchy; and multi-level camera grouping.” “Additionally, over 300 camera brands and 10,000 individual camera models are integrated with the VMS1000™. The VMS1000™ enables analytics on presets and has dedicated buttons for the control of lights, wipers, washers and telemetry for our X-SERIES™ rugged PTZs. It also has comprehensive control of the VEGA™ fixed cameras.” The Redvision VMS1000™ standard analytics functionality includes traffic management (speed filter), object tracking, loitering, virtual fences, missing object, abandoned object, face detection, vehicle counting and people counting. Additional, bolt-on modules are available for LPR, Facial Recognition, edge analytics, edge recording and synopsis.
A blind spot in governance, risk and complianceDownload
H.265 High Efficiency Coding: Video compression for security applicationsDownload
How to overcome the storage challenges of adopting surveillance AIDownload
FERMAX launches MEET IP system providing ease of installation and integration with automation systems
- FERMAX launches MEET IP system providing ease of installation and integration with automation systems
- Hikvision video surveillance solutions deployed at Kids World School in Utah
- Zada provides fully upgraded CCTV camera and recording solution with fibre optic cable network to The Mall Blackburn
- OT Systems Ethernet-over-coax solution transforms analogue security to IP at the Grand Indonesia