Articles by Matthew Batson
Automatic gates remain an increasingly popular security choice for family homes, business premises or public buildings – anywhere that full control over access is needed. While there is much to consider for installers when advising clients on the right solution for their property, from the size, weight and cost of a gate system, it’s useful to be aware of the latest developments in the market, as this can help to find the right option to fit their needs. The need for speed Gates can be automated to either swing or to slide open, and there are many factors to take into consideration, when advising on which option to use. However, swing gate motors tend to be slower than the speeds achievable for sliding gates, which means the latter are usually more popular, especially for commercial sites where timing can be among the more important factors. One of the most recent developments in the sliding gates market is the introduction of faster motors One of the most recent developments in the sliding gates market is the introduction of faster motors, such as those from Bft Automation, which allow for opening and closing at a quicker speed than has previously been achievable. Fast authorised access control From a security point of view, the ability to allow people and goods in and out of a property at a quicker pace reduces the risk of unauthorised entry, while waiting for a gate to close – an important consideration in both commercial and residential contexts. Other benefits of a faster motor include reduced waiting times. This can be particularly useful for properties in busy areas, where a vehicle could risk blocking traffic, while waiting to turn into a site controlled by a slower gate. Faster motors Also, a faster motor could potentially reduce the risk of an accident from vehicles entering a property at speed. For example, this might happen if someone was making their first visit to a property situated off a fast road in an unfamiliar area. Beyond these practical considerations, in today’s fast-paced world, people aren’t as used to having to wait for things and this applies to the time it takes to get in and out of their own property. So, security benefits aside, faster motors are likely to be more appealing for clients who have sliding gates fitted to their domestic property and who prioritise convenience. The choice of which of the new faster motors to use will be impacted by a number of factors, including the weight of the gates. Essentially, the lighter the gate is the higher the speed achievable. And, as always, it’s important to make sure that any installation complies with safety regulations. Intelligent torque management systems A further development in access control technology includes intelligent torque management systems A further development in access control technology includes intelligent torque management systems, which update the level of torque required to perform the gate’s operation, allowing it to work at the optimum level, regardless of weather conditions, temperature or the degree of wear and tear on the device. Depending on the typical weather conditions experienced at the site and the anticipated frequency of use, it’s worth looking at options that take these factors into account. Importance of security rights In some scenarios, it’s important for particular individuals to have security rights. In which case, there are motors available that come with personalised keys, which are unique, providing an additional level of security. Installers often face the challenge of fitting gate motors in confined spaces, potentially making for a time consuming and technically demanding task. Available space When you only have a small space to work with, simple details can go a long way to helping you. For example, by putting the fastening screws on the front of a motor’s casing, installation and maintenance are easier and more convenient, even in particularly compact areas. Working with suppliers that offer more than just a manual means you’ll have access to advice and support on how new products work in practise and what you need to consider before advising on an installation.
The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for post and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing whilst obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc whilst sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for manoeuvre. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.