Technology is front and center at a beautiful new City Hall in the Northwest U.S., where community members will find local government offices, city council chambers and the department of economic development. The building’s tightly integrated electrical, lighting, fire protection, telecommunications and security solutions is the work of Coffman Engineers. Ben Helms was project manager responsible for specifying Vicon’s Valerus VMS and VAX Access Control security solutions into the facility and credits Vicon’s A&E tools and support services with helping him to get the job done right.

Access control and VMS solutions Ben says that his firm has a long history with Vicon through Vicon’s dedicated A&E outreach programs

Ben says that his firm has a long history with Vicon through Vicon’s dedicated A&E outreach programs. In the past, he has attended Vicon’s annual A&E Summit, a 2 ½ day educational event filled with seminars and interactive learning for the specifying community on topics related to surveillance technologies and solutions. It was at one of these seminars that he was first shown a beta version of Valerus, Vicon’s new VMS that was still under development. “I thought it was really cool,” he says. “It’s a big jump to go to an all browser-based system and adds a lot of advantages over a hard system.

As for the VAX Access Control solution, Ben appreciated the over-the-door controllers, which he says, from his standpoint, “made the system a lot less work to design.” He says that “Normally, controllers are all lined up in an IT room and you have masses of wiring going out to the doors, so you have to worry about voltage drop and a lot of other factors. With the VAX controller, you just put it out there, connect it to a PoE drop, and you’re done.

VAX-Valerus integration With the built-in integration between Valerus and VAX, it just made sense to go that way"

When Ben began work on the brand-new City Hall, which required a unified access control and VMS solution, he saw a perfect match. “With the built-in integration between Valerus and VAX, it just made sense to go that way.

Steve Helms, Ben’s father and the Principal in Charge of the project, had also attended Vicon’s A&E Summits in the past and had seen what Valerus and VAX could do. He agreed with Ben’s recommendation.

For putting together specifications for the security portion of the City Hall project, Ben relied on ARCAT SpecWizard, a free online tool that automates the spec building process. Vicon is one of only a few VMS manufacturers who have invested in providing this resource to the A&E community. SpecWizard is particularly helpful for solutions that include a wide range of components and require a degree of customisation for each project. Ben says that he found SpecWizard really easy to use. “I just went in and checked the boxes for the cameras, servers and software that I wanted, and downloaded the completed spec in Word format. All I had to do was edit it a bit to cut out a few things I didn’t need. It made it really simple to grab all the parts and pieces and make sure that everything was covered.

High megapixel cameras The entire City Hall project was built in AutoDesk REVIT software for BIM (building information modeling)

The entire City Hall project was built in AutoDesk REVIT software for BIM (building information modeling), allowing the architecture and engineering teams to collaboratively model the building’s components and simulate its systems and structures. Ben was able to access REVIT models of all of Vicon’s camera models, available through the AutoCAD360 library, drag them into the project and pop them right into place. “This part of the project was really fun,” say Ben. The models clearly showed the mechanicals for the cameras as well as their field of view. When presenting the drawings to the clients, it was easy to explain what could be seen from each camera and how they would all work together as a system to provide coverage of all critical areas.

The City Hall project used several different camera models, with resolutions ranging from 2MP to 12MP. High megapixel cameras generate a tremendous amount of data and calculating bandwidth and storage requirements are complicated by factors such as frame rates, video quality, lighting, the types of images being recorded, and use of settings like motion activated recording. To guide him through this evaluation process, Ben says he relied on Vicon’s free calculator tools, which simplified the challenge of determining the system’s server and storage needs.

Video-access control integration The City Hall project used several different camera models, with resolutions ranging from 2MP to 12MP

While Ben greatly appreciated the many tools that Vicon offers to make his job easier, he says that the biggest reason he would absolutely use VAX and Valerus again is the support he received from the Vicon team. “I have a local Vicon rep here I can call, and I know their entire technical team is always available to help me if I have any sort of issue.

Ben says that it’s also very important to specify solutions that deliver value to his clients. It’s nice to be able to say to them, “Here’s a system that is not going to cost you a ton to install, you can have unlimited user groups, unlimited users, the video and access control will completely integrate with each other, it has all these features included that a lot of systems charge extra for, and the licensing cost is pretty low. From a consulting and specifying standpoint, it checks a lot of the boxes that we really like.

Download PDF version

In case you missed it

What characteristics do salespeople require in the physical security industry?
What characteristics do salespeople require in the physical security industry?

A basic tenet of sales is ABC – always be closing. But it's a principle that most professional salespeople would say oversimplifies the process. Especially in a sophisticated, high-tech market such as physical security, the required sales skills are much more involved and nuanced. We asked this week's Expert Panel Roundtable: What unique characteristics are required of salespeople in the arena of physical security systems?

Can microchip implants replace plastic cards in modern access control?
Can microchip implants replace plastic cards in modern access control?

A futuristic alternative to plastic cards for access control and other applications is being considered by some corporate users in Sweden and the United Kingdom. The idea involves using a microchip device implanted into a user’s hand. About the size of a grain of rice and provided by Swedish company Biohax, the tiny device employs passive near field communication (NFC) to interface with a user’s digital environment. Access control is just one application for the device, which can be deployed in lieu of a smart card in numerous uses. Biohax says more than 4,000 individuals have implanted the device. Using the device for corporate employees Every user is given plenty of information to make an informed decision whether they want to use the deviceCurrently Biohax is having dialogue with curious corporate customers about using the device for their employees. “It’s a dialogue, not Big Brother planning to chip every employee they have,” says Jowan Österlund, CEO at Biohax. Every user is given plenty of information to make an informed decision whether they want to use the device. Data capture form to appear here! “Proof of concept” demonstrations have been conducted at several companies, including Tui, a travel company in Sweden that uses the device for access management, ID management, printing, gym access and self-checkout in the cafeteria. Biohax is also having dialogue with some big companies in the United Kingdom, including legal and financial firms. Österlund aims to have a full working system in place in the next year or so. A Swedish rail company accepts the implanted chip in lieu of a paper train ticket. They accept existing implants but are not offering to implant the chips. Österlund says his company currently has no plans to enter the U.S. market. The device is large enough to locate easily and extract if needed, and small enough to be unobtrusive Access control credential The device is inserted/injected below the skin between the index finger and the thumb. The circuitry has a 10-year lifespan. The device is large enough to locate easily and extract if needed, and small enough to be unobtrusive. The only risk is the possibility of infection, which is true anytime the skin is pierced, and the risk is mitigated by employing health professionals to inject the chip. Use of the device as an access control credential or any other function is offered as a voluntary option; any requirement by an employer to inject the device would be illegal, says Österlund. It’s a convenient choice that is made “based on a well-informed decision by the customer.” Aversion to needles, for example, would make some users squeamish to implant the device. More education of users helps to allay any concerns: Some 10% of employees typically would agree quickly to the system, but a larger group of 50% to 60% are likely to agree over time as they get more comfortable with the idea and understand the convenience, says Österlund. Protection of information The passive device does not actively send out any signals as you walk. It is only powered up by a reader if a user has access rightsIn terms of privacy concerns, information contained on the device is in physical form and is protected. The passive device does not actively send out any signals as you walk. There is no battery. It is only powered up by a reader if a user has access rights. With use of the device being discussed in the United Kingdom, there has been some backlash. For example, Frances O’Grady, general secretary of the Trades Union Congress (TUC), has said: “Microchipping would give bosses even more power and control over their workers.” A big misconception is that the chip is a tracking device, says Österlund. It isn’t. “We love people to get informed,” says Österlund. “If they’re scared or apprehensive, they can just read up. It’s not used to control you – it’s used to give you control.”

Ethical consumption: should you buy security products ‘Made in China’?
Ethical consumption: should you buy security products ‘Made in China’?

Should ‘Made in China’ be seen as a negative in security systems and products? It’s an important and complex issue that merits a more detailed response than my recent comment in the Expert Panel Roundtable. For me, there are two sides of the answer to this question: Buying products that have certain negative attributes that are not in alignment with some part of a belief system or company mandate. Buying products that do not perform as advertised or do something that is unacceptable. For integrators and end users making the buying decisions, the drive to purchase products may not be based on either aspect and instead on the product that can do the best job for their business. But for others, a greater emphasis on the ethical implications of purchasing decisions drives decision-making. What is ethical consumption? Ethical consumption is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favouredEthical consumption — often called ethical consumerism — is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favoured, and products that are ethically questionable may be met with a ‘moral boycott’. This can be as simple as only buying organic produce or as complex as boycotting products made in a totalitarian regime that doesn't offer its citizens the same freedoms that we enjoy in the United States. Consider the goals of the Boston Tea Party or the National Consumers League (NCL), which was formed to protect and promote social and economic justice for consumers and workers in the United States and abroad. Some examples of considerations behind ethical consumption include fair trade, treatment of workers, genetic modification, locally made and processed goods, union-made products and services, humane animal treatment, and in general, labour issues and manufacturing practices that take these factors into account. Increase in ethical consumption The numbers show that ethical consumption is on the rise. In a 2017 study by Unilever, 33 percent of consumers reported choosing to buy and support brands that they believe are doing social or environmental good. In the same study, 53 percent of shoppers in the United Kingdom and 78 percent in the United States said they feel better when they buy products that are ‘sustainably’ produced. There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities Though the aforementioned question that sparked this conversation centres around concerns with products made in China, there are many other countries where, for example, governments/dictators are extremely repressive to all or parts of their populations, whose products, such as oil, diamonds, minerals, etc., we happily consume. There are also a number of countries that are a threat in terms of cybersecurity. It may be naive and simplistic to single out Chinese manufacturers. Impact on physical security products Product buying decisions based on factors other than product functionality, quality and price are also starting to permeate the security marketplace. While this hasn't been a large focus area from the business-to-business consumption side, it's something that should be considered for commercial security products for a variety of reasons. Hardware hacks are more difficult to pull off and potentially more devastating" There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities. Last fall, 30 U.S. companies, including Apple and Amazon, were potentially compromised when it was discovered that a tiny microchip in the motherboard of servers built in China that weren't a part of the original specification. According to a Bloomberg report, “This attack was something graver than the software-based incidents the world has grown accustomed to seeing. Hardware hacks are more difficult to pull off and potentially more devastating, promising the kind of long-term, stealth access that spy agencies are willing to invest millions of dollars and many years to get.” This, along with many other incidents, are changing the considerations behind purchasing decisions even in the physical security industry. Given that physical security products in general have been lax on cybersecurity, this is a welcome change. Combating tech-specific threats In early January, members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors and ensure U.S. technological supremacy by improving interagency coordination across the U.S. government. The bill creates the Office of Critical Technologies & Security at the White House, an indication that this issue is of critical importance to a number of players across the tech sector. Members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors To address a significant number of concerns around ethical production, there are certifications such as ISO 26000 which provides guidance on social responsibility by addressing accountability, transparency, ethical behaviour, respect for stakeholder interests, respect for rule of law, respect for international norms of behaviour and respect for human rights. While still emerging within physical security, companies that adhere to these and other standards do exist in the marketplace. Not buying products vulnerable to cyberattacks It may be counter-productive, even irresponsible, to brand all products from an entire country as unfit for purchasing. Some manufacturers’ products may be ethically questionable, or more vulnerable to cyberattacks than others; so not buying products made by those companies would make sense. The physical security industry might be playing a bit of catch up on this front, but I think we're beginning to see a shift toward this kind of responsible buying behaviour.