Senegal’s Blaise Diagne International Airport has chosen to minimise its parking lot headaches and secure its massive freight zone with intelligent Smart Surveillance solution from the globally renowned supplier of innovative video surveillance products and solutions, Hikvision.

Officially opened by Senegalese president Macky Sall in December 2017, Blaise Diagne International Airportl Airport (AIBD) covers 4,500 hectares of land located near the town of Diass, 47km from the capital of Dakar. Built at a cost of $575 million, the new airport is one of the largest travel hubs in West Africa, with a main runway designed to accommodate long-haul aircraft such as the A380 and B787. Approximately 3 million passengers are expected to travel through AIBD annually, increasing to 10 million by 2035.

Hikvision intelligent surveillance system The airport’s car parking and freight zone are being secured and managed with the help of a Hikvision intelligent surveillance system

Served by leading airlines including Air Algerie, Air Cote d'Ivoire, Ethiopian Airlines, Air France, Kenya Airways, Tunisair, Iberia and South African Airways, catering for passengers with state-of-the-art infrastructure, the airport’s car parking and freight zone are being secured and managed with the help of a Hikvision intelligent surveillance system.

With a two level 42,000m² main passenger terminal and 12,800m² cargo terminal building designed to handle 50,000 tons of cargo and 80,000 aircraft movements annually, the new airport offers a long-term solution to intra-African economic activity, providing excellent levels of aviation connectivity.

Parking and site management

To address the security, efficient management and profitability objectives of the airport’s 17 car park entrances and exits, operator Senecar enlisted the help of Hikvision Authorised Distributor, CST Securite.

As a Hikvision Authorised Distributor, CST Securite capitalised on the support of the Hikvision Technical team, and all parties worked to confirm the final specification to meet the needs of the airport’s car parking and freight zone security surveillance, and site management requirements.

Smart parking management system CST Securite installed 17 x DS-TCG225 2MP HD resolution ANPR cameras

Drawing on specialist products from Hikvision’s Smart Parking Management Solution, for the airport’s car park areas, CST Securite installed 17 x DS-TCG225 2MP HD resolution ANPR cameras, featuring built-in whitelist, LPR identification support, barrier/gate control and audio output.

The Hikvision Smart Parking Management System employed at AIBD uses the latest barrier technology combined with Hikvision industry-standard ANPR (Automatic Number Plate Recognition), to ensure seamless, managed vehicular entrance and exit from parking lots. Fast vehicle identification and integrated barrier control software means queues are kept to a minimum - which means greater vehicle flow can be handled to increase the productivity and efficiency of the car parks.

Hikvision Darkfighter cameras

The industry-leading Hikvision Darkfighter and True WDR imaging technologies employed in the airport’s ANPR system were specified to deliver crisp and clear recognition, alongside a recording of every vehicle using the car parks day and night.

A development beyond traditional technology, the airport’s car park barrier activation is not driven by traditional sensor coils in the floor (that detect a vehicle waiting to enter or exit), but by highly accurate ‘radar’ sensors. This technology enables far simpler installation and maintenance, as no ground works are required to dig across roadways or pedestrian pavements to install the traditional sensing coils and their cables. Additionally, the Hikvision radar solution is not affected by local environmental influences such as light, dust or rain, that can inhibit the performance of traditional sensing coil-based solutions. Radar is also a much more reliable technology, as pedestrians as well as vehicles, can be detected far more accurately - ensuring a much safer operation within the airport’s busy vehicular and pedestrian traffic environment.

Hikvision’s radar solution The Hikvision Smart Parking Management System provides a range of configurable alarms that help the ANPR system operators to manage daily activity

Helping Senecar to maximise their operation, the system provides invaluable statistical and analytical parking lot information, supplying status history, parking usage rate and parking vehicle flow, to name but a few.

Underlining the advanced performance capability of the Hikvision Smart Parking Management System, a range of configurable alarms helps the ANPR system operators to manage daily activity, such as unauthorised parking, over-time parking and illegal access, which all helps to support highly-effective vehicle and security management.

High-level freight security

Designed to handle 50,000 tons of cargo and 80,000 aircraft movements annually, AIBD’s 12,800m² cargo terminal building located to the south-west of the runway accommodates the airport’s freight handling, and incorporates a number of storage areas, freezers, office facilities and electromechanical service areas.

To integrate with the airport’s mix of security measures and site management, CST Securite liaised with the airport security team to identify the most advantageous locations to install the freight zone cameras. Designed to capture a comprehensive view of all key internal and external areas, a mix of Hikvision DS-2CD2T42WD 4MP / DS-2CD2T22WD 2MP full HD EXIR Bullet Network Cameras with built-in IR to 50m, and DS-2CD2142FWD 4MP / DS-2CD2122FWD 2MP full HD Vandal-resistant Network Dome Cameras with built-in IR to 30m and edge storage - all with IP67 protection were installed.

Hikvision IP cameras and NVRs Hikvision NVR-7332NI-E4/16P Embedded Plug & Play NVR’s and a DS-7716NI-I4 NVR were installed to provide up to 6MP resolution recording

Supporting the Hikvision cameras’ high-performance imaging, their on-board VCA alarm activation parameters was set-up for individual camera scenes, to provide automated alarm activations and situation awareness of any predetermined set of events within each cameras’ view.

To provide the airport’s security and management teams with effective real-time and playback monitoring, at the control room, Hikvision NVR-7332NI-E4/16P Embedded Plug & Play NVR’s and a DS-7716NI-I4 NVR were installed to provide up to 6MP resolution recording. Simple and intuitive systems control is provided by Hikvision’s iVMS-5200E Control Software, enabling all aspects of the surveillance system to be managed effectively.

Commenting on the AIBD installation, Kevin Zhu, General Manager of CST Securite said: “Having used their products many times before on other high-profile projects, we had no doubt that the choice of Hikvision surveillance products would provide the customer with an efficient, and reliable intelligent surveillance solution. We can confirm the good reputation of Hikvision products’ quality is backed by an equally good experience of their after-sales service.

Download PDF version

In case you missed it

Virtual worlds disrupt building security & facility management
Virtual worlds disrupt building security & facility management

From satellite imagery to street views to indoor mapping, technology has disrupted our past world. This has left us dependent upon new ways to visualise large spaces. This new world has brought many benefits and risks. But what does that mean for the security professional or facility manager today and what technologies can be used to secure buildings and improve facility operations? A brief history of 3D technology Starting May 5, 2007 (inception 2001), Google rolled out Google Street View to augment Google Maps and Google Earth; documenting some of the most remote places on earth using a mix of sensors (Lidar/GSP/Radar/Imagery). The mission to map the world moved indoors May 2011 with Google Business Photos mapping indoor spaces with low cost 360° cameras under the Trusted Photographer program. In the earlier days, 3D scanning required a high level of specialisation, expensive hardware and unavailable computing power With the growth of 3D laser scanning from 2007 onwards, the professional world embraced scanning as effective method to create digitised building information modelling (BIM), growing fast since 2007. BIM from scanning brought tremendous control, time and cost savings through the design and construction process, where As-Built documentation offered an incredible way to manage large existing facilities while reducing costly site visits. In the earlier days, 3D scanning required a high level of specialisation, expensive hardware, unavailable computing power and knowledge of architectural software. Innovation during the past 8 year, have driven ease of use and lower pricing to encourage market adoption. Major investments in UAVs in 2014 and the commercial emergence of 360° photography began a new wave of adoption. While 3D scanners still range from $20K – $100K USD, UAVs can be purchased for under $1K USD and 360° cameras for as low as $100. UAVs and 360° cameras also offer a way to document large spaces in a fraction of the time of terrestrial laser scanners with very little technical knowledge.  Access to building plans, satellite imagery, Google Street View, indoor virtual tours and aerial drone reconnaissance prove effective tools to bad actors The result over the past 10+ years of technology advancement has been a faster, lower cost, more accessible way to create virtual spaces. However, the technology advances carry a major risk of misuse by bad actors at the same time. What was once reserved to military personal is now available publicly. Access to building plans, satellite imagery, Google Street View, indoor virtual tours and aerial drone reconnaissance prove effective tools to bad actors. Al Qaeda terror threats using Google Maps, 2007 UK troops hit by terrorists in Basra, 2008 Mumbai India attacks, 2016 Pakistan Pathankot airbase attacks, ISIS attacks in Syria using UAVs, well-planned US school shootings and high casualty attacks show evidence that bad actors frequently leverage these mapping technologies to plan their attacks. The weaponization of UAVs is of particular concern to the Department of Homeland Security: "We continue to face one of the most challenging threat environments since 9/11, as foreign terrorist organisations exploit the internet to inspire, enable or direct individuals already here in the homeland to commit terrorist acts."   Example comparison of reality capture on the left of BIM on the right. A $250 USD 360° camera was used for the capture in VisualPlan.net software What does this mean for the security or facility manager today? An often overlooked, but critical vulnerability to security and facility managers is relying on inaccurate drawing. Most facilities managers today work with outdated 2D plan diagrams or old blueprints which are difficult to update and share.Critical vulnerability to security and facility managers is relying on inaccurate drawing Renovations, design changes and office layout changes leave facility managers with the wrong information, and even worse is that the wrong information is shared with outside consultants who plan major projects around outdated or wrong plans. This leads to costly mistakes and increased timelines on facility projects.  Example benefits of BIM There could be evidence of a suspect water value leak which using BIM could be located and then identified in the model without physical inspection; listing a part number, model, size and manufacture. Identification of vulnerabilities can dramatically help during a building emergency. First Responders rely on facilities managers to keep them updated on building plans and they must have immediate access to important building information in the event of a critical incident. Exits and entrances, suppression equipment, access control, ventilation systems, gas and explosives, hazmat, water systems, survival equipment and many other details must be at their fingertips. In an emergency situation this can be a matter of life or death. Example benefit of reality capture First Responders rely on facilities managers to keep them updated on building plans A simple 360° walk-through can help first responders with incident preparedness if shared by the facility manager. Police, fire and EMS can visually walk the building, locating all critical features they will need knowledge of in an emergency without ever visiting the building. You don’t require construction accuracy for this type of visual sharing. This is a solution and service we offer as a company today. Reality capture is rapidly becoming the benchmark for facility documentation and the basis from which a security plan can be built. Given the appropriate software, plans can be easily updated and shared.  They can be used for design and implementation of equipment, training of personnel and virtual audits of systems or security assessments by outside professionals. Our brains process visual information thousands of times faster than text. Not only that, we are much more likely to remember it once we do see it. Reality capture can help reduce the need for physical inspections, walk-throughs and vendor site-visits but more importantly, it provides a way to visually communicate far more effectively and accurately than before. But be careful with this information. You must prevent critical information falling into the hands of bad actors. You must watch out for bad actors attempting to use reality capture as a threat, especially photo/video/drones or digital information and plans that are posted publicly. Have a security protocol to prevent and confront individuals taking photos or video on property or flying suspect drones near your facility and report to the authorities. Require authorisation before capturing building information and understand what the information will be used for and by who.There are a number of technologies to combat nefarious use of UAVs today Nefarious use of UAVs There are a number of technologies to combat nefarious use of UAVs today, such as radio frequency blockers and jammers, drone guns to down UAVs, detection or monitoring systems. Other biometrics technologies like facial recognition are being employed to counter the risk from UAVs by targeting the potential operators. UAVs are being used to spy and monitor for corporate espionage and stealing intellectual property. They are also used for monitoring security patrols for the purpose of burglary. UAVs have been used for transport and delivery of dangerous goods, delivering weapons and contraband and have the ability to be weaponised to carry a payload.Investigating reality capture to help with accurate planning and visualisation of facilities is well worth the time The Federal Aviation Administration has prevented UAV flights over large event stadiums, prisons and coast guard bases based on the risks they could potentially pose, but waivers do exist. Be aware that it is illegal today to use most of these technologies and downing a UAV, if you are not Department of Justice or Homeland Security, could carry hefty penalties. Facility managers must have a way to survey and monitor their buildings for threats and report suspicious UAV behaviours immediately to authorities. At the same time, it’s critical to identify various potential risks to your wider team to ensure awareness and reporting is handled effectively. Having a procedure on how identify and report is important. Investigating reality capture to help with accurate planning and visualisation of facilities is well worth the time. It can help better secure your facilities while increasing efficiencies of building operations. Reality capture can also help collaboration with first responders and outside professionals without ever having to step a foot in the door. But secure your data and have a plan for bad actors who will try to use the same technologies for nefarious goals.

Intellectual honesty: the growth of Cobalt Robotics and robots in security
Intellectual honesty: the growth of Cobalt Robotics and robots in security

The best route to greater adoption of robotics in the field of physical security is intellectual honesty, says Travis Deyle, CEO and co-founder of Cobalt Robotics. “Robots are not a panacea, so we must be clear and honest about capabilities and use cases,” he says. “If you are dishonest, people will lose faith. We must have clear expectations about what’s feasible today and possible tomorrow.” The robotics tide is turning in the security market, which is notoriously slow to embrace new technologies. “The tone has changed at recent security events,” says Deyle. “Previously, robots were thought of as a science experiment. But now, there are big-name users wanting to discuss proof of concept. It has evolved from being a novelty to now it’s time to give it a serious look. They want us to help them sell the concept up the chain of command. It’s helpful to have conversations with other parts of the company because it has an impact on the culture of the company.” The robotics tide is turning in the security market, which is notoriously slow to embrace new technologies Cobalt’s robots are purpose-built for a specific use case: providing after-hours support and security for corporate locations. Indoor environments, confined and controlled, present fewer navigation challenges for robots, which can quickly become familiar with the surroundings and navigate easily through an office space. Indoor robots can provide benefits beyond security, too, such as facility management, promoting employee health and safety, and emergency response. Cobalt's human-centred design Cobalt’s robots also interact well with people. They are friendly and approachable and make employees feel safe and secure. The human-centered design promotes that interaction, and a real person (located remotely) can enter into any interaction instantly as needed. “We combine machines with people,” says Deyle. “We allow the machine to do what it does best, such as dull and boring activities, and add the flexibility and cultural relevancy of having a person there.” Cobalt’s robots also interact well with people, they are friendly and approachable and make employees feel safe and secure When a robot is deployed, it performs a brief mapping phase (about an hour), in which it moves around and builds up a “map” of its space and develops its patrol route. Over time, it lingers more in areas where it encounters more incidents. There are 60 sensors on the robot, including day/night cameras, high-resolution thermal cameras, a card reader that integrates with the corporate access control system, a microphone, and environmental sensors for temperature and humidity.  The robot builds models of what’s normal in its environment in terms of people, sound, motion, open doors and windows, and even leaks and spills. And then it detects anomalies and sends relevant notifications to Cobalt specialists, who respond and manage any events in real time. The machine provides unwavering attention, perfect recall, and accountability. Cobalt robots have been designed to help bridge the problems faced with utilising guards and cameras  Accommodating various anomalies  The Cobalt robot is designed to blend into a high-end office environment, with flexible fabric and a corporate design aesthetic. It is stable beyond 45-degrees, so it’s hard to topple over. The 5-foot-2-inch robot can see over desks and cubicles. It is designed to bridge the gap between guards, who are expensive and underutilised during uneventful night shifts, and cameras, which are unable to respond to nuanced situations. Cobalt Robotics already has customers in defense, finance and manufacturing, and a handful of Fortune 500 companies are looking at the service Autonomous navigation uses artificial intelligence (AI) and machine learning to avoid static and dynamic obstacles. Over time, the robot accommodates various anomalies such as loud machinery noise, and “semantic mapping” adds intelligence to its map. When the robot figures out that a picture on the wall is not a real person, for example, it stores that information for future reference.  The technologies enabling robotics in the indoor environment are mature – there have been variations of security robots in operation for decades. What has changed is the costs of the technologies, which are now inexpensive enough to make a robot affordable to businesses. Cobalt Robotics offers an all-inclusive service providing hardware, software, service and maintenance as well as the remote human interface. All together, the service is a third to half the cost of a man-guard, and it bills monthly, says Deyle. Cobalt Robotics offers an all-inclusive service providing hardware, software, service and maintenance as well as the remote human interface Cobalt Robotics already has customers in defense, finance and manufacturing, and a handful of Fortune 500 companies are looking at the service. They are currently operational in the San Francisco Bay area and Chicago and will be in six other geographies in the next three months (in response to customer needs). Uses include offices, museums, warehouses, technology centres, and innovation centres.  A former Google employee, Deyle’s experience in robotics goes back to his Ph.D. studies at Georgia Tech, where he worked on developing a robot to deliver healthcare to homebound patients. Deyle and Cobalt Robotics co-founder Erik Schluntz departed Google in 2016 to form Cobalt Robotics. In just 12 months, Cobalt went from the initial idea to paid robot deployments.

Which segments are under-served in the physical security industry?
Which segments are under-served in the physical security industry?

Physical security technologies operate successfully in many different markets, but in which markets do they fall short? Physical security is a difficult challenge that can sometime defy the best efforts of manufacturers, integrators and end users. This is especially the case in some of the more problematic markets and applications where even the best technology has to offer may not be good enough, or could it be that the best technology has not been adequately applied? We asked this week’s Expert Panel Roundtable to reflect on instances when the industry may fall short: Which segments of the physical security industry are most under-served and why?