Maintaining an educational environment that is conducive to learning requires, at a minimum, that we keep our school children safe and secure. It’s easier said than done, given the wide range of sizes and types of educational institutions.

Campus Security

High-profile violence in educational environments highlight the urgency of the need for security and safety systems

High-profile violence in educational environments highlight the urgency of the need for security and safety systems, and the challenges extend beyond preventing the active shooter incidents that grab headlines. In the United States, 79% of public schools recorded that one or more incidents of violence, theft, or other crimes had taken place, amounting to 1.4 million crimes. That translates to a rate of 29 crimes per 1,000 students.

Security is a 24-hour challenge. Protecting schools involves deployment of a range of security and physical hardening tools. Reducing risk requires that access to school buildings be controlled, while also preserving an ‘open’ campus atmosphere that promotes a learning environment. Schools should be an inviting place for students and families, so technology solutions aimed at restricting access should be low-profile and unobtrusive. School security must also be designed in layers, or concentric circles of protection, starting at the school’s perimeter and working inward to secure individual classrooms and other internal areas.

Enhancing video security at schools

Video surveillance is a technology that is unobtrusive and can promote security beginning at the outermost boundaries of the school environment – at the perimeter and as automobiles drive onto school grounds. Surveillance can keep a silent and constant watch on people comes and goes.

Furthermore, incorporating new artificial intelligence (AI) and deep learning technologies are increasing the real-time capabilities of video surveillance to provide early warning of a possible security threat as it enters a campus. AI and deep learning analyse the content of video feeds and provide usable information to security personnel, including analysis of trends and real-time alarms when an event takes place.

Incorporating AI into video security

Video feeds are analysed in real-time and alarms can be raised only if there is a problem

In addition to controlling perimeter access, video surveillance incorporating AI can also provide other benefits, such as keeping watch on a school campus after hours – before and after school, or even on weekends when extra-curricular activities may be taking place. The systems can monitor traffic flow and ensure that only authorised vehicles enter an area. The benefits of AI-driven video systems also enable greater effectiveness of systems that are not being actively monitored.

Video feeds are analysed in real-time and alarms can be raised only if there is a problem. Whenever a vehicle passes into a restricted area on a school’s campus, the video system captures a vehicle image and automatically provides significant data.

ANPR systems

Automated number plate recognition (ANPR) systems identify the license numbers of cars that enter a school’s parking entrance or gate and can match the numbers to a watch list and provide an alarm. The technology could also be used to monitor compliance with restricted areas; for example, to only allow vehicles that registered for a parking pass to park in a certain lot. A more advanced approach could involve dual identification technologies – vehicle plate and facial recognition of a driver – to add another layer of security.

Video systems with illegal parking detection can define a zone for no parking at a school. If any vehicle enters the area, the camera will be triggered to collect evidence. Images are captured of illegally parked vehicles, and the system provides data about when and where it occurred, the vehicle plate number and the parking violation.

Traffic cameras with DL technology

Traffic cameras with deep learning technology can also identify and classify vehicles

Traffic cameras with deep learning technology can also identify and classify vehicles; in effect, to distinguish between small and large vehicles and even detect a vehicle’s make, model and colour. For instance, it is possible to differentiate between cars and buses in ‘buses only’ areas. Currently such cameras are more commonly deployed on public streets and highways, but the capability is there.

The system can also capture images and produce alarm data if a vehicle is driven in the wrong direction, such as into an exit-only lane or the wrong way on a roadway.

Facial recognition systems

Facial recognition can be used at school entrances and gates to promote security of students and staff and to identify known suspects who attempt to enter the building. ‘Blacklist alarm’ technology generates a notification if a known suspect enters.

Clarity is paramount when identifying faces, and cameras that provide wide dynamic range (WDR) can offset challenges such as backlighting on a bright day when the light behind a person coming in is brighter than the ambient light inside.

People counting cameras

Facial recognition systems can also be used inside school buildings. A facial recognition terminal installed at the entrance of a campus building or library can be configured to ensure that only registered students and staff have access to the buildings.

People counting cameras can be used in cafeterias and libraries to provide daily or monthly traffic reports and to better understand peak times and arrange workflow accordingly.

Unified security solution

Tedious and error-prone manual monitoring can now be replaced by more intelligent systems

Feeds from all the cameras can be managed, monitored and stored in an authorised security centre, either located on a campus or in a central location that combines camera feeds from multiple campuses in a school district, for example. In general, security staff can access surveillance data in a variety of ways, via a desktop, laptop, or mobile device. Such flexibility makes the job of security personnel easier. A campus police or resource officer can view video on a mobile device while patrolling the campus.

Often video surveillance systems at schools are not monitored. School security personnel have more pressing duties than sitting in front of a video monitor, and it is difficult for operators to stay alert for detailed incidents that may be shown on the screen. Tedious and error-prone manual monitoring can now be replaced by more intelligent systems that provide alarms only when there is something to see. 

Maximising school surveillance capabilities

Systems to maximise school surveillance and security include dedicated, high-performance cameras for event capture, embedded network video recorder for event recording and storage, and a centralised video management platform to unify the system. AI and deep learning technologies automate security processes and provide useful real-time information that extends beyond video images. Deploying these technologies at the perimeter can promote better security campus-wide by preventing danger from entering the learning environment.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Which technologies will disrupt the security industry in the second half of 2020?
Which technologies will disrupt the security industry in the second half of 2020?

The first half of 2020 has been full of surprises, to say the least, and many of them directly impacted the physical security market. The COVID-19 pandemic created endless new challenges, and the physical security market has done our part to meet those challenges by adapting technology solutions such as thermal cameras and access control systems. In the second half of 2020, we can all hope for a return to normalcy, even if it is a “new normal.” In any case, technology will continue to play a big role. We asked this week’s Expert Panel Roundtable: Which technologies have the greatest potential to disrupt the security industry in the second half of 2020?

What do you need to know about thermal imaging cameras?
What do you need to know about thermal imaging cameras?

As businesses, schools, hospitals and sporting venues look to safely reopen in a COVID-19 world, thermal imaging systems will play a critical role in helping to detect and distinguish skin temperature variations in people. Thermal surveillance, a mainstay of traditional physical security and outdoor perimeter detection, is now being deployed to quickly scan employees, contractors and visitors as part of a first line of defense to detect COVID-19 symptoms. In the coming weeks and months, the security industry will look to implement thermal camera solutions for customers, yet many questions remain as to the differences between different system types and how to properly install thermal imaging cameras. In this Q&A, Jason Ouellette, Head of Technology Business Development for Johnson Controls, answers several of these questions. Q: What are some of the different thermal imaging solutions available in the market to detect an elevated temperature in a person? For the general market, there are three types of these thermographic screenings. There is the handheld device, which is typically lower cost, very portable, and very easy to use. Typically, this is a point and shoot type of device, but it requires you to be three feet or less from the person that you're screening, which, in today's world, means the user needs to wear protective personal equipment. For the general market, there are three types of these thermographic screenings The second type of solution would best be described as a thermal camera and kiosk. The advantage of this system over a handheld device is this can be self-service. An individual would go up to and engage with the kiosk on their own. But many of these kiosk type solutions have some integration capability, so they can provide some type of output, for either turnstiles, or physical access control, but not video management systems (VMS). Some of the downside of this type of system is that it’s less accurate than a thermographic solution because it does not have a blackbody temperature calibration device and the readings are influenced by the surrounding ambient temperature, called thermal drift. So instead of being able to achieve a ±0.3ºC accuracy rating, this system probably provides closer to ±0.5ºC at best. Some of these devices may be classed as a clinical thermometer with a higher degree of one time accuracy, but do not offer the speed and endurance of the thermographic solution for adjunctive use. And then there are thermal imaging camera systems with a blackbody temperature calibration device. These types of systems include a dual sensor camera, that has a visual sensor and a thermal sensor built right into the camera, along with a separate blackbody device. This provides the highest degree of ongoing accuracy, because of the blackbody and its ability to provide continuous calibration. These systems can provide much more flexibility and can offer integrations with multiple VMS platforms and access control devices. Q: When installing a thermal imaging camera system what is the most important element to consider? Camera placement is critical to ensure the system works as expected, however the placement of the blackbody device which verifies the correct calibration is in place is equally as important. If the customer wants to follow FDA medical device recommendations for camera placement, both the height of the camera and the blackbody as well as the distance between these devices should comply with the product installation instructions. This takes into account the device focal range and calibration parameters in addressing the distance from the person undergoing the scan. Also, integrators should minimise camera detection angles to ensure optimal accuracy and install cameras parallel with the face as much as possible, and again in compliance with installation instructions. Integrators should minimise camera detection angles to ensure optimal accuracy The blackbody should be placed outside of the area where people could block the device and located more towards the edges of the field-of-view of the camera. You need to keep in mind the minimum resolution for effective thermographic readings which is 320 by 240 pixels as defined by the standards. To achieve this, you would need to follow medical electrical equipment performance standards driven by IEC 80601-2-59:2017 for human temperature scanning and FDA guidelines. Within that measurement, the face needs to fill 240 x 180 pixels of the thermal sensor resolution, which is close to or just over 50 percent of the sensor’s viewing area typically, meaning a single person scanned at a time in compliance with the standards for accuracy.  Along with height and distance placement considerations, the actual placement in terms of the location of the system is key. For example, an expansive glass entryway may impact accuracy due to sunlight exposure. Installations should be focused on ensuring that they are away from airflow, heating and cooling sources, located approximately 16 feet from entry ways and in as consistent of an ambient temperature as possible between 50°F and 95°F. Q: Once a thermal imaging camera system is installed, how do you monitor the device? There are several choices for system monitoring, depending on whether the solution is used as standalone or integrated with other technologies, such as intrusion detection, access control or video systems. For standalone systems, the ability to receive system alerts is typically configured through the camera’s webpage interface, and the cameras include abilities such as the live web page, LED display for alerting, audio alerts and physical relay outputs. When done right, these features will all follow cybersecurity best practices which is important for any network solution today, including changing default passwords and establishing authentication methods. The ability to receive system alerts is typically configured through the camera’s webpage interface These types of thermal cameras can also integrate with turnstile systems, VMS platforms and access control systems. This is typically done through the integration of a relay output, activated by a triggered temperature anomaly event on a thermal imaging camera which can then be used for activities such as locking a turnstile, or through access control and video systems to send an email or provide an automated contagion report for contact tracing. These capabilities and integrations extend the monitoring capability above that of the standalone solution. The camera can be configured to monitor a specific range of low and high alerts. Users can determine the actions that should be taken when that alert exceeds the preset low or high threshold. These actions include things like a bright and easy-to-see LED can provide visual notification through pulsing and flashing lights as an example. Q: What about system maintenance? Does a thermal imaging camera require regular service in order to operate accurately? First it’s important to make sure the system is calibrated. This can be done after the unit stabilises for at least 30 minutes to establish the initial reference temperature source known as the blackbody. Calibrations conducted before this warm up and stability time period can throw off accuracy. Also, as part of your system maintenance schedule you will want to perform a calibration check of the blackbody device every 12 months, along with following recommendations of the FDA and IEC. If you install the solution and don’t perform maintenance and the blackbody calibration certificate expires, over time there’s a risk that the device will experience drift and a less accurate reading will result. There’s a risk that the device will experience drift and a less accurate reading will result Q: What final pieces of advice do you have for either an integrator who plans to install a thermal imaging camera system or an end user who plans to invest in this solution? Before you buy a thermal imaging camera check to see if the manufacturer ships the camera with a calibration certificate. Also, become familiar with FDA’s guidance released in April 2020, Enforcement Policy for Telethermographic Systems During the Coronavirus Disease 2019 (COVID-19) Public Health Emergency. This document places thermal/fever products for adjunctive use under the category of a Class I medical devices and subject to its regulatory control. Driven by these regulations and categorisation, users need to understand specifically what is required to meet the required level of accuracy for successful detection. While thermal imaging camera systems are more complex than traditional surveillance cameras, they can prove to be a valuable resource when set up, configured and maintained properly.

Recognising the importance of security officers to promote safety
Recognising the importance of security officers to promote safety

The general public doesn’t give much thought to the important role of security officers in creating and promoting safer environments. The low-profile work of security officers is vital to protecting people, places and property. During the pandemic, newer aspects to that role have emerged. Security personnel have been called on to perform diverse tasks such as managing queues at the supermarket, safeguarding testing centres and hospitals, ensuring food deliveries, and supporting police patrols. The British Security Industry Association (BSIA) and two other organisations in the United Kingdom are joining forces to raise awareness of the work of security officers and to recognise the vital importance of the duties they perform. BSIA, a trade association, includes members who are responsible for 70% of privately provided UK security products and services, including security guarding, consultancy services, and distribution and installation of electronic and physical security equipment. BSIA, the Security Institute and the Security Commonwealth Joining BSIA in the awareness campaign are the Security Institute, a professional security membership body; and the Security Commonwealth, which is comprised of 40 organisations from across the security landscape with common objectives to build professionalism, raise standards and share best practices. “The recognition of security officers as key workers is the start of a re-appraisal of what service they provide to the community in keeping the public safe and secure,” says Mike Reddington, BSIA Chief Executive. “As we exit lockdown and have to navigate public spaces again, [security officers] will have a crucial role in supporting public confidence. We are working closely with the Police and all other public bodies to find the best way to achieve this.” Security officers acknowledged as key workers The campaign will showcase security professionals as a respected, valued, professional service provider and a key worker that is acknowledged and embedded in daily lives. The British Security Industry Association (BSIA) and two other organisations in the United Kingdom are joining forces to raise awareness of the work of security officers “Great effort has been invested in the professional standards and capabilities of frontline [security] officers, and they have proven their worth during the coronavirus crisis in the UK,” says Rick Mounfield, Chief Executive, the Security Institute. “They, along with the wider security sector, deserve to be recognized, respected and appreciated for the safety and security they provide across the United Kingdom.” “[We are working to] build professionalism, raise standards and share best practices, and I hope this campaign can make more people recognise the changes we have all made and continue to make,” says Guy Matthias, Chairman of the Security Commonwealth (SyCom). The industry will be reaching out to companies, professionals, and organisations in the sector to participate in the campaign. The hope is that, over the coming weeks as lockdown is eased, the industry can play its part to ensure that the country emerges with confidence to start to recover and build for the future. Private security more important than ever The campaign will showcase security professionals as a respected, valued, professional service provider Across the pond in the United States, law enforcement professionals are facing a crisis of confidence during a time of civil unrest as protestors call to “defund the police” and to otherwise undermine and/or recast law enforcement’s role in preserving the peace and ensuring public safety. If an upshot is that public policing is starved of resources, the role of private security to supplement their mission is likely to increase. In short, the role of private security is more important than ever on both sides of the Atlantic. Public recognition of that role is welcome, obviously. In any case, the importance of their role protecting people, places and property has never been greater.