With a length of only 127 mm and a diameter of 48 mm, these ultra-compact cameras complement the current product portfolio of explosion-proof cameras, and cannot only be installed easily but are also cost-effective – making SAMCON a full-stack supplier.

Due to the easy integration into existing video management systems and the fact that cameras can be combined flexibly, Samcon's portfolio virtually covers all CCTV applications for hazardous areas.

Whether an only 700g weighing thermal camera, a high-speed system with electronic zoom and focus lens, or a high-speed dome camera is required – Samcon offers secure surveillance for all applications and areas.

Benefits of the ExCam ultra-compact systems

The new camera line is suitable for temporary and semi-fixed applications, too. The waterproof IP68 housing is resistant to chemicals as well as to oil and can be installed in locations where larger equipment does not fit or an installation is difficult due to restricted space.

Compact design with sensors

The HDTV resolution and the high-performance varifocal lens master all surveillance tasks and create safe areas

The ExCam IPP1275 can easily keep up with larger models regarding performance and resolution, even exceeding competitor models in certain functional areas. For example, the camera's progressive scan allows providing high-resolution pictures of moving objects without motion blur. The HDTV resolution (1920 x 1080) and the high-performance varifocal lens master all surveillance tasks and reliably create safe areas.

The ExCam IPP1275 is a modularly designed ATEX network camera and consists of an ultra-compact sensor unit for image capturing as well as the main unit, processing the image. Integrated into the main unit are the network as well as power connection and a storage card slot.

Thermal camera with night vision

Apart from the ExCam IPP1275, Samcon also presents with the ExCam IPP1280 its first own thermal camera. Its most outstanding feature is that even in complete darkness, it can still deliver pictures so that no external light sources are necessary.

Just as the ExCam IPP1275, also the ExCam IPP1280 consists of an ultra-compact sensor unit for capturing the thermal image as well as the main unit for processing it.

Multi signal camera

In addition to that, an analog AHD camera completes the portfolio: The ExCam miniTube is an analog multi-signal camera with very high light sensitivity in combination with an ultra-compact housing and a fixed focal length.

This camera also is designed for applications in hazardous areas, meeting the requirements of guideline 14/34/EU ATEX and IECEx. Due to its ultra-compact size, it is particularly suitable for process observations.

Just as all models of the ExCam Series, also the ultra-compact cameras have been certified according to the European (ATEX) and international guidelines (IECEx).

Suitable for difficult to access areas

The ExCam IPP1275 as well as the ExCam IPP1280 and the ExCam miniTube are real lightweights and so easy to handle that they can be installed by a single person. This is, for example, an advantage in the chemical industry or on oil rigs with confined spaces and not much freedom of movement.

The easy power supply via PoE makes a separate power line superfluous and contributes, apart from the low weight, to an easy installation. Close to processes or mounted to very small sight glasses, not only the ExCam IPP1275 always finds its place, for example:

  • At sight glasses located between pipe installations for monitoring the flow rate
  • Small mixing containers (e.g. for colors or chemical substances)
  • A small laboratory size reactors and freeze-driers and in compact industrial machines

Enables surveillance and efficient monitoring

They help to detect problems, can be used for surveilling machines and production runs

The compact design and its low weight minimize vibrations and allow sufficient space to even place an additional light next to the camera. The cameras are of a rather inconspicuous design and allow, for example, reliable surveillance of plant filling stations, general plant areas, or vehicles such as tank and lift trucks or cranes.

They help to detect problems, can be used for surveilling machines and production runs, and secure the functionality of components by monitoring them.

Just like all other cameras of the ExCam Series, also the ultra-compact cameras are certified according to ATEX and IECEx to guarantee extensive explosion protection. The ex-protected housing covers ATEX groups II and can be used in zones 1, 2, 21, and 22 including the explosion groups IIC / IIIC.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

How has security industry training changed in the last year?
How has security industry training changed in the last year?

In-person training sessions were mostly canceled during the worst of the COVID-19 pandemic. However, the need for training continued, and in some cases increased, as the security industry sought to adapt to the changing business climate of a global emergency. So how well did we as an industry adjust? We asked this week’s Expert Panel Roundtable: How has security industry training changed in the last year?

Physical access control: Critical steps to ensure a smarter future
Physical access control: Critical steps to ensure a smarter future

Steven Kenny, Axis Communications, looks at the benefits of physical access control systems within smart environments, and how knowledge gaps and dated methods can inhibit adoption. Physical security is becoming more dynamic and more interconnected, as it evolves. Today’s modern access control solutions are about so much more than simply opening doors, with digitalisation bringing multiple business benefits, which would simply not be possible using traditional models. Digital transformation While the digital transformation of processes and systems was already well underway, across many industries and sectors, it is the transformation of physical security from a standalone, isolated circuit, to a network-enabled, intelligent security solution that brings many benefits to the smart environment. Yet, with more organisations now looking to bring their physical security provision up to date, there are many considerations that must be addressed to maximise the potential of access control and video surveillance. Not least of which is that connecting physical security devices to a network presents risk, so it is increasingly important for IT teams to play a role in helping to facilitate the secure integration of physical and network technologies, as these two worlds increasingly converge. Improved access control in smart environments These urban constructs are capable of reducing waste, driving efficiencies and optimising resources The smart city offers significant benefits, reflected in the US$ 189 billion that is anticipated to be spent on smart city initiatives globally by 2023. These urban constructs are capable of reducing waste, driving efficiencies, optimising resources and increasing citizen engagement. Technology, which is increasingly being incorporated to protect access points within the smart environment, can take many forms. These range from simple card readers to two factor authentication systems, using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. Frictionless access control During the COVID-19 pandemic, frictionless access control has provided an effective ‘hands free’ means of accessing premises, using methods such as QR code readers and facial recognition as credentials to prove identity. Frictionless access control brings health and safety into the equation, as well as the security of entrances and exits, minimising the risk of infection, by removing the need to touch shared surfaces. Such systems can be customised and scaled to meet precise requirements. Yet, an increasing integration with open technologies and platforms requires collaboration between the worlds of physical security and IT, in order to be successful. Barriers to adoption Traditional suppliers and installers of physical security systems have built up a strong business model around their expertise, service and knowledge. Network connectivity and the IoT (Internet of Things) present a constantly shifting landscape, requiring the traditional physical security vendor to learn the language of IT, of open platforms, IP connectivity and software integration, in order to adapt to market changes and remain relevant. Many are now beginning to realise that connected network-enabled solutions are here to stay Those who cannot adapt, and are simply not ready for this changing market, risk being left behind, as the physical security landscape continues to shift and demand continues to increase. With end users and buyers looking for smarter, more integrated and business-focused solutions from their suppliers, it is clear that only those who are prepared will succeed in this space. Time will not stand still, and many are now beginning to realise that connected network-enabled solutions are here to stay, particularly within smart constructs which rely on such technology by their very nature. The importance of cyber hygiene Connecting any device to a network has a degree of risk, and it is, therefore, imperative that any provider not only understands modern connected technologies, but also the steps necessary to protect corporate networks. Cameras, access control systems and IP audio devices, which have been left unprotected, can potentially become backdoors into a network and used as access points by hackers. These vulnerabilities can be further compromised by the proliferation of connected devices within the Internet of Things (IoT). While the connection of devices to a network brings many advantages, there is greater potential for these devices to be used against the very business or industry they have been employed to protect when vulnerabilities are exploited. Cyber security considerations Cyber security considerations should, therefore, be a key factor in the development and deployment of new security systems. Access control technologies should be manufactured according to recognised cyber security principles, incident reporting and best practices. It is important to acknowledge that the cyber integrity of a system is only as strong as its weakest link and that any potential source of cyber exposure will ultimately impact negatively on a device’s ability to provide the necessary high levels of physical security. The future of access control There is a natural dispensation towards purchasing low-cost solutions There is a natural dispensation towards purchasing low-cost solutions that are perceived as offering the same value as their more expensive equivalents. While some have taken the decision to implement such solutions, in an attempt to unlock the required benefits, while saving their bottom line, the limited lifespan of these technologies puts a heavier cost and reputational burden onto organisations by their association. The future of access control, and of physical security as a whole, will, therefore, be dependent on the willingness of suppliers to implement new designs and new ways of thinking, based around high-quality products, and to influence the installers and others in their supply chains to embrace this new world. Cyber security key to keeping businesses safe In addition, cyber security considerations are absolutely vital for keeping businesses safe. The integration of cyber secure technologies from trusted providers will provide peace of mind around the safety or corporate networks, and integrity of the deployed technologies. As we move forward, access control systems will become data collection points and door controllers will become intelligent I/O devices. QR codes for visitor management and biometric face recognition for frictionless access control will increasingly be managed at the edge, as analytics in a camera or sensor. The future of access control presents an exciting and challenging time for those ready to accept it, to secure it and to help shape it, offering a true opportunity to innovate for a smarter, safer world.

Wire-free, mobile first and data rich? The future of access control is within almost anyone’s reach
Wire-free, mobile first and data rich? The future of access control is within almost anyone’s reach

The 2020s will be a wireless decade in access control, says Russell Wagstaff from ASSA ABLOY Opening Solutions EMEA. He examines the trends data, and looks beyond mobile keys to brand new security roles for the smartphone. The benefits of wire-free electronic access control are well rehearsed. They are also more relevant than ever. A wireless solution gives facility managers deeper, more flexible control over who should have access, where and when, because installing, operating and integrating them is easier and less expensive than wiring more doors. Battery powered locks Many procurement teams are now aware of these cost advantages, but perhaps not their scale. Research for an ASSA ABLOY Opening Solutions (AAOS) benchmarking exercise found installation stage to be the largest contributor to cost reduction. Comparing a typical installation of battery-powered Aperio locks versus wired locks at the same scale, the research projected an 80% saving in installers’ labour costs for customers who go cable-free. Battery powered locks all consume much less energy than traditional wired locks Operating costs are also lower for wireless: Battery powered locks all consume much less energy than traditional wired locks, which normally work via magnets connected permanently to electricity. Wireless locks only ‘wake up’ when presented with a credential for which they must make an access decision. AAOS estimated a 70% saving in energy use over a comparable lock’s lifetime. Find out more about wireless access control at ASSA ABLOY's upcoming 29th June webinar Deploying wireless locks In short, every time a business chooses a wireless lock rather than a wired door, they benefit from both installation and operating cost savings. A recent report from IFSEC Global, AAOS and Omdia reveals the extent to which the advantages of wireless are cutting through. Responses to a large survey of security professionals — end-users, installers, integrators and consultants serving large corporations and small- to medium-sized organisations in education, healthcare, industrial, commercial, infrastructure, retail, banking and other sectors — suggest almost four locations in ten (38%) have now deployed wireless locks as a part or the whole of their access solution. The corresponding data point from AAOS’s 2014 Report was 23%. Electronic access control Electronic access control is less dependent than ever on cabling Without doubt, electronic access control is less dependent than ever on cabling: Even after a year when many investments have been deferred or curtailed, the data reveals fast-growing adoption of wireless locks, technologies and systems. Is mobile access control — based on digital credentials or ‘virtual keys’ stored on a smartphone — an ideal security technology for this wire-free future? In fact, the same report finds mobile access is growing fast right now. Among those surveyed, 26% of end-users already offer mobile compatibility; 39% plan to roll out mobile access within two years. Before the mid-2020s, around two-thirds of access systems will employ the smartphone in some way. The smartphone is also convenient for gathering system insights Driving rapid adoption What is driving such rapid adoption? The convenience benefits for everyday users are obvious — witness the mobile boom in banking and payments, travel or event ticketing, transport, food delivery and countless more areas of modern life. Access control is a natural fit. If you have your phone, you are already carrying your keys: What could be easier? IBM forecasts that 1.87 billion people globally will be mobile workers by 2022 Less often discussed are the ways mobile management makes life easier for facility and security managers, too. Among those polled for the new Wireless Access Control Report, almost half (47%) agreed that ‘Mobile was more flexible than physical credentials, and 36% believe that mobile credentials make it easier to upgrade employee access rights at any time.’ IBM forecasts that 1.87 billion people globally will be mobile workers by 2022. Workers in every impacted sector require solutions which can get the job done from anywhere: Access management via smartphone offers this. Site management device The smartphone is also convenient for gathering system insights. For example, one new reporting and analytics tool for CLIQ key-based access control systems uses an app to collect, visualise and evaluate access data. Security system data could contribute to business success. The app’s clear, visual layout helps managers to instantly spot relevant trends, anomalies or patterns. It’s simple to export, to share insights across the business. Reinvented for learning — not just as a ‘key’ or site management device — the phone will help businesses make smarter, data-informed decisions. The smartphone will also play a major role in security — and everything else — for an exciting new generation of smart buildings. These buildings will derive their intelligence from interoperability. Over 90% of the report’s survey respondents highlighted the importance of integration across building functions including access control, CCTV, alarm and visitor management systems. Genuinely seamless integration They offer greater peace of mind than proprietary solutions which ‘lock you in’ for the long term Yet in practice, stumbling blocks remain on the road to deeper, genuinely seamless integration. More than a quarter of those polled felt held back by a lack of solutions developed to open standards. ‘Open standards are key for the momentum behind the shift towards system integration,’ notes the Report. As well as being more flexible, open solutions are better futureproofed. Shared standards ensure investments can be made today with confidence that hardware and firmware may be built on seamlessly in the future. They offer greater peace of mind than proprietary solutions which ‘lock you in’ for the long term. Open solutions and mobile management are critical to achieving the goals which end-users in every vertical are chasing: scalability, flexibility, sustainability, cost-efficiency and convenience.