Multiple Construction sites in the Albuquerque area are managed by Shumate Constructors, Inc., an Albuquerque, New Mexico-based construction contractor, that is also renowned for building educational facilities. In addition to building schools from the ground up, Shumate Constructors completes school additions and remodels.

Construction site thefts

Three years ago, the company began having problems keeping thieves out of its construction sites during non-working hours. Unwatched construction sites are hot beds for a variety of thefts - from copper pipes and wire to hand tools to heavy-duty machinery.

The loss of machinery, such as front-end loaders, would cost hundreds-of-thousands of dollars. Sometimes workers will arrive to a site in the morning only to find materials, such as copper pipe, gone along with their tools.

Enhancing construction site security

The sites also presented a challenge due to changing construction conditions

The result is the loss of a whole day and sometimes multiple days of work. On top of the lost time, the contractor has to cover the cost of replacing materials, file an insurance claim for each theft and complete additional administrative paperwork that they weren’t planning to invest time in.

The sites also presented a challenge due to changing construction conditions. Equipment or storage containers are delivered and removed, the sites are graded/re-graded and as sections of build were completed, tools, materials and supplies were moved to different areas.

Flexible, reliable wireless solution

At a contractor trade show a few years ago, Mark Shumate, President of Shumate Constructors met Dave Meurer, President of Albuquerque’s Armed Response Team. Meurer introduced Shumate to the idea of a flexible, reliable wireless solution that could continually monitor the entire site without the need to trench around the perimeter.

Mark [Shumate] was fed up with theft at his construction sites so we started to discuss some prevention ideas,” said Meurer, adding “I knew this was a great fit for the combined Inovonics transmitter and Optex sensor solution.

Optex sensors installed

He further said, “At the Armed Response Team, we refer to this solution as the never sleeping, non-blinking eye. Shumate was not aware of any reliable solutions that could provide this type of theft prevention, but we explained that we were very confident in this application and he was definitely interested.

To install each combined sensor, the Armed Response Team attached the Optex sensors to a freestanding steel post with a base plate on it and deployed them throughout the site. This allowed the flexibility to be easily moved to accommodate site changes. Once installed, a signal was easily achieved.

iSeries Optex/Inovonics sensors

The amount of iSeries Optex/Inovonics sensors needed at Shumate’s sites vary

The sensors in the combined solution often need to communicate as far as an entire city block and the perimeters can be several thousands of feet. The iSeries Inovonics/Optex solution was able to easily accomplish this feat. The amount of iSeries Optex/Inovonics sensors needed at Shumate’s sites vary. For some sites, it can be as few as a dozen, and others it can be as many as 30 or more.

Together, the products offer a great solution,” noted Meurer, adding “The Optex sensors can handle varying weather conditions and Inovonics’ wireless connectivity offers less signal drop and more consistent reporting signal than any of the other transmitters we’ve tried.

Efficient perimeter security solution

Between the perimeter technology by Inovonics and Optex, and the Armed Response Team’s follow-up, we have seen zero thefts for all projects since installation. With the integrated wireless solution, the construction sites are monitored on a real-time basis and immediately notify the Armed Response Team upon unauthorised access,” said Mark Shumate, President of Shumate Constructors.

He adds, “We look at the perimeter security solution as a great investment. Annually, the cost of manpower, replacement of lost or stolen items and damage repairs could easily cost three times more than we spend on Armed Response Teams’ services with the Optex and Inovonics solution.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

What is the impact of lighting on video performance?
What is the impact of lighting on video performance?

Dark video images contain little or no information about the subject being surveilled. Absence of light can make it difficult to see a face, or to distinguish the color of clothing or of an automobile. Adding light to a scene is one solution, but there are also new technologies that empower modern video cameras to see better in any light. We asked this week’s Expert Panel Roundtable: what impact does lighting have on the performance of video systems?

Alarm.com adapts during pandemic to enable partners to ‘succeed remotely’
Alarm.com adapts during pandemic to enable partners to ‘succeed remotely’

As a cloud-based platform for service providers in the security, smart home and smart business markets, Alarm.com has adapted quickly to changing conditions during the coronavirus pandemic. In the recent dynamic environment, Alarm.com has kept focus on supporting their service provider partners so they can keep local communities protected. “We moved quickly to establish work-from-home protocols to protect our employees and minimise impact on our partners,” says Anne Ferguson, VP of Marketing at Alarm.com. The Customer Operations and Reseller Education (CORE) team has operated without interruption to provide support to partners. Sales teams are utilising webinars and training resources to inform and educate partners about the latest products, tools, and solutions. Alarm.com’s partner tools are essential for remote installations and support of partner accounts. Helping customers remain connected Adapting to challenges of the coronavirus pandemic, Alarm.com is further investing in solutions that help customers remain connected and engaged. The company has created a resource hub called “Succeeding Remotely” that provides tools, tips and news links that partners can use to adapt their business operations. From adjusting sales and installation techniques to maintaining cellular upgrades, Alarm.com is helping partners stay connected to customers remotely, keep their teams trained, and address rapidly evolving customer concerns without rolling trucks.The company has created a resource hub called “Succeeding Remotely “Additionally, after seeing all that our partners are doing to support their local communities in need, we were compelled to highlight those efforts with ongoing videos called Good Connections, which we’re sharing with our partner community to spark more ideas and ways to help,” says Ferguson. “Though our partners have experienced varying degrees of disruption to their business, we’re inspired by their adaptability, ingenuity and resilience,” says Ferguson. “Along with establishing proper safeguards for operating in homes and businesses, our partners are leveraging our support resources more heavily, while our entire staff has worked tirelessly to deliver new, timely resources.” Do-It-Together solutions Alarm.com partners are successfully employing Do-It-Together (DIT) solutions, focusing on 3G-to-LTE upgrades, and pivoting to new verticals like commercial and wellness. Many are also streamlining their business operations and taking advantage of virtual training opportunities to enhance their technicians’ skills and knowledge, says Ferguson. Do-It-Together installs involve depending on customers to perform part or all of the installation process. Partners can send customers fully configured kits with mounting instructions, or technicians may guide customers on a remote video call. Alarm.com’s tools, training and products help partners modify remote installation options depending on each customer’s needs. End users can validate the Alarm.com Smart Gateway with their central station that sensors they have mounted were done correctly using the Alarm.com mobile app Alarm.com Smart Gateway For example, the Alarm.com Smart Gateway can be pre-configured with indoor and outdoor cameras for easy customer installation and to reduce the likelihood of future service calls. Also, end users can validate with their central station that sensors they have mounted were done correctly using the Alarm.com mobile app. “DIT is helping our partners continue onboarding customers and avoid backlogs,” says Ferguson. “We’ve been pleasantly surprised by the resiliency and level of future investment that our residential and commercial partners have shown in the face of adversity,” adds Ferguson. For example, a significant number of business customers have used the slow period to install systems that are typically too disruptive to put in during normal business hours. Similarly, service providers are adopting new technologies or business models, such as cloud-based access control. “They’re often saying to us, ‘I’m going to take this opportunity to make changes to improve our business,’ and have been working closely with us on training and business consulting to support their efforts,“ she says. Shift to the cloud Ferguson sees a growing preference for cloud-managed surveillance and access systems over ones that have historically been run on-premise. The technology itself is attractive, but especially driving change is the enhancement to the daily lives of service providers and customers, which have been strained during this time. “The foundational benefit of our cloud-based solution is the hassle-free, seamless customer experience it delivers,” says Ferguson. “We make this possible by taking ownership of the servers, software maintenance, firmware updates, health monitoring, and more. With cloud technology, these aspects become invisible to the customer and take a lot off their plate, which is more important than ever.” End users can take advantage of Smart Tip video tutorials to help with DIT installations, or they can use the Alarm.com Wellcam to connect with loved ones anywhere.End users can take advantage of Smart Tip video tutorials to help with DIT installations Partners can attend training workshops focused on remote installation tactics, while driving consumer interest in new offerings through Alarm.com’s Customer Connections platform. The goal is to make it simple for partners to stay connected to their customers to maximise lifetime account value. “We are well-positioned to endure the pandemic because of the strength of our partners in their markets along with our investments in technology, hardware and our team,” says Ferguson. “As restrictions slowly lift, there is cautious optimism that the residential, commercial, property management, plumbing/HVAC, builder and other verticals will recover quickly. We believe that as more partners adopt the DIT model and add commercial and wellness RMR, they will find increasing opportunities to deploy security, automation, video, video analytics, access and more throughout their customer base.”

COVID-19 worries boost prospects of touchless biometric systems
COVID-19 worries boost prospects of touchless biometric systems

Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads. No longer in favour are contact-based modalities including use of personal identification numbers (PINs) and keypads, and the shift has been sudden and long-term. Both customers and manufacturers were taken by surprise by this aspect of the virus’s impact and are therefore scrambling for solutions. Immediate impact of the change includes suspension of time and attendance systems that are touch-based. Some two-factor authentication systems are being downgraded to RFID-only, abandoning the keypad and/or biometric components that contributed to higher security, but are now unacceptable because they involve touching. Touchless biometric systems in demand The trend has translated into a sharp decline in purchase of touch modality and a sharp increase in the demand for touchless systems, says Alex Zarrabi, President of Touchless Biometrics Systems (TBS). Biometrics solutions are being affected unequally, depending on whether they involve touch sensing, he says. Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads “Users do not want to touch anything anymore,” says Zarrabi. “From our company’s experience, we see it as a huge catalyst for touchless suppliers. We have projects being accelerated for touchless demand and have closed a number of large contracts very fast. I’m sure it’s true for anyone who is supplying touchless solutions.” Biometric systems are also seeing the addition of thermal sensors to measure body temperature in addition to the other sensors driving the system. Fingerscans and hybrid face systems TBS offers 2D and 3D systems, including both fingerscans and hybrid face/iris systems to provide touchless identification at access control points. Contactless and hygienic, the 2D Eye system is a hybrid system that combines the convenience of facial technology with the higher security of iris recognition. The system recognises the face and then detects the iris from the face image and zeros in to scan the iris. The user experiences the system as any other face recognition system. The facial aspect quickens the process, and the iris scan heightens accuracy. TBS also offers the 2D Eye Thermo system that combines face, iris and temperature measurement using a thermal sensor module. TBS's 2D Eye Thermo system combines face, iris and temperature measurement using a thermal sensor module Another TBS system is a 3D Touchless Fingerscan system that provides accuracy and tolerance, anti-spoofing, and is resilient to water, oil, dust and dirt. The 2D+ Multispectral for fingerprints combines 2D sensing with “multispectral” subsurface identification, which is resilient to contaminants and can read fingerprints that are oily, wet, dry or damaged – or even through a latex glove. In addition, the 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue. The system fills the market gap for consent-based true on-the-fly systems, says Zarrabi. The system captures properties of the hand and has applications in the COVID environment, he says. The higher accuracy and security ratings are suitable for critical infrastructure applications, and there is no contact; the system is fully hygienic. Integration with access control systems Integration of TBS biometrics with a variety of third-party access control systems is easy. A “middleware” subsystem is connected to the network. Readers are connected to the subsystem and also to the corporate access control system. An interface with the TBS subsystem coordinates with the access control system. For example, a thermal camera used as part of the biometric reader can override the green light of the access control system if a high temperature (suggesting COVID-19 infection, for example) is detected. The enrollment process is convenient and flexible and can occur at an enrollment station or at an administration desk. Remote enrollment can also be accomplished using images from a CCTV camera. All templates are encrypted. Remotely enrolled employees can have access to any location they need within minutes. The 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue Although there are other touchless technologies available, they cannot effectively replace biometrics, says Zarrabi. For example, a centrally managed system that uses a Bluetooth signal from a smart phone could provide convenience, is “touchless,” and could suffice for some sites. However, the system only confirms the presence and “identity” of a smart phone – not the person who should be carrying it. “There has been a lot of curiosity about touchless, but this change is strong, and there is fear of a possible second wave of COVID-19 or a return in two or three years,” says Zarrabi. “We really are seeing customers seriously shifting to touchless.”