People and vehicle access control specialist, Nortech offers a number of products within the Nedap product range that use vehicle tagging to identify individual vehicles while they are moving through a monitoring point.

uPASS Reach reader

The uPASS Reach reader offers long-range vehicle identification for up to 5 metres using the latest UHF technology.    

With consistent reading up to 5 metres and adjustable onsite reading as just two of the benefits of the system, the uPASS Reach reader has an elegant slim design, LED and audible read indication and is encased in weatherproof housing. It also operates with passive UHF tags, self-adhesive windscreen tags and hand-held tags with dual-technology options.

Long-range passive UHF tags

The reader output allows the access control system to open the gate/barrier when an authorised vehicle arrives

When the uPASS Reach reader is installed (maximum height two metres) next to an automatic gate or barrier, long-range passive UHF tags are identified at a distance of up to 5 metres as soon as they are visible in direct line of sight of the reader.

The reader output allows the access control system to open the gate/barrier when an authorised vehicle arrives without the need for the driver to present a card or badge, and the built-in high intensity LED provides the user visual feedback that the tag has been read. UHF tags are also both battery and maintenance-free.

UHF Windshield Tag

To work alongside the uPASS Reach, Nedap has designed four different UHF tags to suit all environments. The UHF Windshield Tag is a passive UHF transponder and offers long range identification up to 5 metres when installed inside non metallised windscreens.

This provides cost-effective long range vehicle identification for access control applications and is available as a standard peel off version or as a tamperproof version for additional security.

Passive UHF Exterior Tag

Where vehicle windscreens are fully metallised, Nedap offers a passive UHF Exterior Tag which can be easily fitted onto non-metallic / plastic parts of the vehicle such as the headlights.

For added security, the UHF Exterior Tag is a tamper resistant, transparent, adhesive tag. It will show visual proof of removal and is extremely difficult to remove, intact and functional. The chip inside is also protected against harmful UV rays.

UHF Heavy Duty Tag

This tag features a rugged design for long term use in outdoor and industrial environments

The Nedap UHF Heavy Duty Tag is a passive UHF transponder which again offers long-range identification up to 5 metres with the uPASS Reach. However, this tag features a rugged design for long term use in outdoor and industrial environments. The UHF Heavy Duty Tag is a cost-effective solution for installations where the tag needs to be mounted onto the exterior of the vehicle and can also be cable tied or bolted onto bicycles, forklifts and many other industrial devices.

Finally, the UHF ISO Combi Card is a card featured with long-range UHF tag and proximity or smartcard technology. Used for both people and vehicle access, it enables the use of one card for both vehicle and building access applications. Available with a range of formats such as Mifare, Legic and HID.

Efficient vehicle identification reader

The uPASS Reach reader complies with the ISO18000-6C and EPC global Gen 2 directive. This long-range vehicle identification reader is based on latest passive UHF technology. It is used in combination with battery free UHF (EPC Gen 2) tags, making this access control solution totally cost efficient. The uPASS Reach is ideal for convenient vehicle access to public car parks, private-run parking spaces and lots, gated communities and staff parking areas in corporate offices and government buildings.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Managing security during unprecedented times of home working
Managing security during unprecedented times of home working

Companies are following government guidance and getting as many people as possible working from home. Some companies will have resisted home working in the past, but I’m certain that the sceptics will find that people can be productive with the right tools no matter where they are. A temporary solution will become permanent. But getting it right means managing risk. Access is king In a typical office with an on-premise data centre, the IT department has complete control over network access, internal networks, data, and applications. The remote worker, on the other hand, is mobile. He or she can work from anywhere using a VPN. Until just recently this will have been from somewhere like a local coffee shop, possibly using a wireless network to access the company network and essential applications. CV-19 means that huge numbers of people are getting access to the same desktop and files, and collaborative communication toolsBut as we know, CV-19 means that huge numbers of people are getting access to the same desktop and files, applications and collaborative communication tools that they do on a regular basis from the office or on the train. Indeed, the new generation of video conferencing technologies come very close to providing an “almost there” feeling. Hackers lie in wait Hackers are waiting for a wrong move amongst the panic, and they will look for ways to compromise critical servers. Less than a month ago, we emerged from a period of chaos. For months hackers had been exploiting a vulnerability in VPN products from Pulse Secure, Fortinet, Palo Alto Networks, and Citrix. Patches were provided by vendors, and either companies applied the patch or withdrew remote access. As a result, the problem of attacks died back.  But as companies race to get people working from home, they must ensure special care is taken to ensure the patches are done before switching VPNs on. That’s because remote desktop protocol (RDP) has been for the most part of 2019, and continues to be, the most important attack vector for ransomware. Managing a ransomware attack on top of everything else would certainly give you sleepless nights. As companies race to get people working from home, they must ensure special care is taken to ensure the patches are done before switching VPNs on Hackers are waiting for a wrong move amongst the panic, and they will look for ways to compromise critical serversExposing new services makes them also susceptible to denial of service attacks. Such attacks create large volumes of fake traffic to saturate the available capacity of the internet connection. They can also be used to attack the intricacies of the VPN protocol. A flow as little as 1Mbps can perturbate the VPN service and knock it offline. CIOs, therefore, need to acknowledge that introducing or extending home working broadens the attack surface. So now more than ever it’s vital to adapt risk models. You can’t roll out new services with an emphasis on access and usability and not consider security. You simply won’t survive otherwise. Social engineering Aside from securing VPNs, what else should CIO and CTOs be doing to ensure security? The first thing to do is to look at employee behaviour, starting with passwords. It’s highly recommended that strong password hygiene or some form of multi-factor authentication (MFA) is imposed. Best practice would be to get all employees to reset their passwords as they connect remotely and force them to choose a new password that complies with strong password complexity guidelines.  As we know, people have a habit of reusing their passwords for one or more online services – services that might have fallen victim to a breach. Hackers will happily It’s highly recommended that strong password hygiene or some form of multi-factor authentication (MFA) is imposedleverage these breaches because it is such easy and rich pickings. Secondly, the inherent fear of the virus makes for perfect conditions for hackers. Sadly, a lot of phishing campaigns are already luring people in with the promise of important or breaking information on COVID-19. In the UK alone, coronavirus scams cost victims over £800,000 in February 2020. A staggering number that can only go up. That’s why CIOs need to remind everyone in the company of the risks of clickbait and comment spamming - the most popular and obvious bot techniques for infiltrating a network. Notorious hacking attempts And as any security specialist will tell you, some people have no ethics and will exploit the horrendous repercussions of CV-19. In January we saw just how unscrupulous hackers are when they started leveraging public fear of the virus to spread the notorious Emotet malware. Emotet, first detected in 2014, is a banking trojan that primarily spreads through ‘malspam’ and attempts to sneak into computers to steal sensitive and private information. In addition, in early February the Maze ransomware crippled more than 230 workstations of the New Jersey Medical Diagnostics Lab and when they refused to pay, the vicious attackers leaked 9.5GB or research data in an attempt to force negotiations. And in March, an elite hacking group tried to breach the World Health Organization (WHO). It was just one of the many attempts on WHO and healthcare organisations in general since the pandemic broke. We’ll see lots more opportunist attacks like this in the coming months.   More speed less haste In March, an elite hacking group tried to breach the World Health Organization (WHO). It was just one of the many attempts on WHOFinally, we also have bots to contend with. We’ve yet to see reports of fake news content generated by machines, but we know there’s a high probability it will happen. Spambots are already creating pharmaceutical spam campaigns thriving on the buying behaviour of people in times of fear from infection. Using comment spamming – where comments are tactically placed in the comments following an update or news story - the bots take advantage of the popularity of the Google search term ‘Coronavirus’ to increase the visibility and ranking of sites and products in search results. There is clearly much for CIOs to think about, but it is possible to secure a network by applying some well thought through tactics. I believe it comes down to having a ‘more speed, less haste’ approach to rolling out, scaling up and integrating technologies for home working, but above all, it should be mixed with an employee education programme. As in reality, great technology and a coherent security strategy will never work if it is undermined by the poor practices of employees.

How does audio enhance security system performance?
How does audio enhance security system performance?

Video is widely embraced as an essential element of physical security systems. However, surveillance footage is often recorded without sound, even though many cameras are capable of capturing audio as well as video. Beyond the capabilities of cameras, there is a range of other audio products on the market that can improve system performance and/or expand capabilities (e.g., gunshot detection.) We asked this week’s Expert Panel Roundtable: How does audio enhance the performance of security and/or video systems? 

How have standards changed the security market?
How have standards changed the security market?

A standard is a document that establishes uniform engineering or technical criteria, methods, processes, and/or practices. Standards surround every aspect of our business. For example, the physical security marketplace is impacted by industry standards, national and international standards, quality standards, building codes and even environmental standards, to name just a few. We asked this week’s Expert Panel Roundtable: How have standards changed the security market as we know it?