Looe is a busy seaside town and fishing port built around a harbour and river in south-east Cornwall with 5000 residents
Dallmeier helps the town of Looe benefit from a high-quality CCTV system with a limited budget
Dallmeier's innovative approach to CCTV provision in the Cornish town of Looe is demonstrating that the benefits of a high-quality, monitored system are even within the reach of smaller towns with limited budgets.

Looe is a busy seaside town and fishing port built around a harbour and river in south-east Cornwall. It has a population of about 5,000 and its main business is summer tourism, although it remains popular all year round as a shopping and entertainment centre for the local area. Four organisations, including Looe Town Council, are responsible for different areas of the town, thanks to its complex geography and ownership. Apart from the council, there are also separate town trusts for East Looe and West Looe, while Looe Harbour Commissioners own and run the fish market and harbour area.

A co-operative relationship between Looe Town Council, the police, installer Perspective CCTV Ltd. and Dallmeier has resulted in a service that is tailored to the town's needs while avoiding unnecessary expenses such as full-time dedicated monitoring. Perspective's monitoring team in Essex is available at the end of a phone line so that officers on patrol can request real-time information if they need to know what is happening elsewhere in town. The system's owner, Looe Town Council, gives the police unlimited access to the recordings for investigating incidents.

Safeguarding the town

"The main aims are to assist the police and make people feel safer. The most important issue is the behaviour of youngsters on Friday and Saturday nights," says Looe Town Clerk Anne Frith.

"Like most modern towns, there are problems arising from excessive use of alcohol. "There is vandalism - in particular shop windows are smashed," adds Councillor Michael Joy.

Proof of the system's value came very quickly. "It had only been live for two days when the police used it to catch someone who had broken into the jeweller's," says Anne Frith. "It has also assisted the police in one or two minor assaults since then and with investigation of other minor crimes where vandalism has been involved," adds Councillor Michael Joy. The police have visited the council's offices on several occasions to look at images and the recordings have also been used to provide evidence with regard to damage caused by an over-sized lorry entering the town's narrow streets.

Careful sitings

Six cameras cover key vantage points in the town, linked to Dallmeier M-DMS 4 recorders which are in two separate locations, but can both be monitored from the Town Council's office. Dallmeier recorders were chosen for their quality, reliability and ease-of-use on the recommendation of Perspective, which is a strong advocate of the equipment following extensive experience.
 Careful positioning of the CCTV cameras ensures the capture of images of everyone passing on the main streets
Security cameras sited in public areas including the car park and key junctions on the main roads give best coverage

The cameras are sited in public areas, including the car park and key junctions on the main roads which provide the best overall pictures of what is happening in the town. Careful positioning at these strategic points ensures the capture of images of everyone and every vehicle passing along the main streets. "Perspective has done a good job for us - we have no complaints at all," says Mrs Frith. Most of the cameras are domes with built-in IR lighting to provide clear night-time shots.

Looe Harbour Commissioners already had a similar Dallmeier-based system and so a large part of the town is covered between the two networks. East Looe Town Trust has also recently installed a CCTV network, further boosting the town's coverage.

Providing backup

Although Looe Town Council has provided the system, it is primarily intended for police use both in investigating any incidents and, more unusually, in calling for live information from the installer's monitoring centre in Essex. This is where the system's main long-term benefit lies, according to Perspective CCTV Ltd. Director Andrew Oakes.

The system can be accessed at any time from the monitoring control room, should the council or police need help. "We also do a ‘dial-in patrol' at night - we connect and scan through all the cameras every hour," says Mr Oakes. An out-of-hours number is available for use by any police officer requiring assistance.

Police officers currently visit the council's offices whenever they want to view the CCTV images on a dedicated computer there, though there are plans for the Dallmeier viewing software to be installed at the police station. Even then, the monitoring service would remain useful as Looe's police officers are generally out on patrol at night and so would not normally have anyone available to monitor the CCTV system.

A snapshot image has been taken from each camera to remind the police of its field of view. When they are on patrol, they will know whether an incident is likely to have been captured by a particular camera. "They could be at one end of town while something is happening at the other end," says Mr Oakes. "Now, they can call us, and someone will look at the screen and describe what is happening elsewhere. We become a backup to the local police." For instance, the Perspective team could give a live description over the phone of where suspects are heading.

Looking ahead

It will be easy to add new cameras to the Dallmeier recording system, thanks to built-in expansion capabilities. "We will probably expand camera coverage towards the sea front," says Mrs Frith. This will cover a dead zone between the town centre's network and the one belonging to East Looe Town Trust, which owns the seafront. "I am quite sure that as time goes on the CCTV will continue to become even more useful," she says. "People get very emotive about ‘Big Brother' but if you look at most cities and towns that have a CCTV system it does actually improve the quality of life for residents and visitors," adds Councillor Joy.

Download PDF version Download PDF version

In case you missed it

How soon will access control cards become extinct and why?
How soon will access control cards become extinct and why?

Since the advent of the physical security industry, access control has been synonymous with physical cards, whether 125 kHz ‘prox’ cards or the newer smart card alternatives. However, other credentials have also come on the scene, including biometrics and even smart phones. Some of these choices have distinct cost and security advantages over physical cards. We asked this week’s Expert Panel Roundtable: How soon will the access control card become extinct and why? 

Addressing the Internet Of Things (IoT) and challenges in device design using a comprehensive approach
Addressing the Internet Of Things (IoT) and challenges in device design using a comprehensive approach

As the number of connected devices increases worldwide, the ways that they are being used, designed, and tested have also expanded. The rise of connected devices is demanding engineers to harness the power of the internet of things, which is expected to hit 28 billion by 2025. A comprehensive approach to device design is needed more than ever to address the challenges that this rapid growth will bring. Why engineers should be using IoT technology in product design The demand for devices designed to use the Internet of Things (IoT) technology is increasing as more industries are finding expanded ways to put them into use. Industries such as healthcare, automobiles, and agriculture are becoming more dependent on cloud capabilities and are therefore in need of new devices able to connect to it. Due to this rise in demand, an increasing amount of devices are delivering a multitude of benefits both to consumers and companies. However, this new wave of products has led to a growing list of challenges for engineers as they are forced to address IoT tech in regards to connectivity, regulations, longevity, and security. Ways to use IoT in the development process Engineers are facing these new challenges along with the normal pressure of deadlines and test considerations. By approaching all of these issues from a comprehensive point-of-view, the solutions become clearer and new device capabilities can be born. Let’s look at the challenges individually as well as possible solutions for them. Improving connectivity IoT enables data to be transferred between infrastructure, the cloud, and devices, making the process smooth  Because IoT is based around connection, it’s no surprise that the primary challenge for engineers to overcome is the improvement of connectivity between devices. IoT enables data to be transferred between infrastructure, the cloud, and devices, so making this process as smooth as possible is crucial. The main challenges involved with connectivity have to do with development and product testing while meeting industry standards and best practices. Additionally, many companies lack the necessary equipment and technology to develop new IoT devices, which makes it difficult to create scalable prototypes and test new products. Suggested solutions To address the issue of not having the expertise and necessary tools for testing, we suggest outsourcing the prototyping and evaluation process instead of attempting to tackle this in-house. By doing this, you’re able to free up resources that would otherwise be needed for expensive equipment and qualified staff. Helping comply with regulations When working with devices that are connected across the world, there is a complex web of regulations and conformance standards that can lead to challenges for engineers. The necessity of complying with these regulations while also pushing to meet deadlines can be burdensome and lead to an increase in production time and expenses. Failure to comply with global and regional laws, as well as system and carrier requirements, can lead to fines and costly setbacks. This type of failure can destroy a company’s reputation on top of causing financial losses, often leading to the loss of business. Suggested solutions By testing the IoT device design and components early, engineers can address any pre-compliance issues that may arise. During the early stages of development, we suggest using scalable and automated test systems readily available in the marketplace. Improved communication with other devices New challenges arise as new devices hit the market and existing technologies are redesigned to offer a better experience In the rapidly growing number of connected devices, new challenges will arise as new devices hit the market and existing technologies are redesigned to offer a better user experience. This rapid growth in devices will lead to congested networks leading to the necessity of devices being able to function in the midst of increased traffic and interference. Failure to do this will lead to delayed responses which could prove to be fatal. Suggested solutions The best solution for this issue is found in the evaluation process and supporting test methods that the Institute of Electrical and Electronics Engineers (IEEE) published in the American National Standard for Evaluation of Wireless Coexistence (ANSI). This process addresses the interconnectivity issues present in radio frequency environments. The outlined process involves defining the environment and evaluating the wireless performance of the equipment through thorough testing. An in-depth version can be found in its entirety online. Increasing the longevity of devices IoT devices are being used in vital industries such as healthcare and automotive so battery life and power consumption are two challenges that engineers must take seriously. A failure in this area could potentially lead to loss of life or safety concerns on the road. As new firmware and software are being designed to address these factors, engineers must be implementing them into IoT devices with the ability to be continually updated. Suggested solutions Longevity should be addressed in all aspects of the design process and tested thoroughly using a wide range of currents. By doing this, an engineer can simulate consumer applications to best predict performance. Security Security and privacy are concerns with any technology, but with the use of IoT in medical devices, it’s paramount Security has been a controversial issue for IoT since its inception. Security and privacy are concerns with any technology, but with the widespread use of IoT in medical devices, smart home appliances, and access control and surveillance, it’s paramount. For example, medical devices may store information about health parameters, medications, and prescriber information. In some cases, these devices may be controlled by an app, such as a smart pacemaker, to prevent heart arrhythmias. Naturally, a security issue in these devices could be devastating. Another example of dangerous security concern is with surveillance cameras and access control, such as for home or business security systems. These intelligent door locking systems contain locks, lock access controllers, and associated devices that communicate with each other. Suspicious activities are flagged with alerts and notifications, but if a hacker gains access, it can lead to real-world, physical danger. Security design points Here are some key points for security design: Physical security: IoT devices may be in external, isolated locations that are vulnerable to attack from not only hackers but by human contact. Embedding security protection on every IoT device is expensive, but it’s important for general security and data safety. Security of data exchange: Data protection is also important because data gets transmitted from IoT devices to the gateway, then onto the cloud. With surveillance and access control information or sensitive medical information, and encryption is vital to protecting data from a breach. Cloud storage security: Similar to data exchange, the information stored in medical devices, surveillance and access control systems, and some smart appliances with payment features, must be protected. This includes encryption and device authentication through access control, which can police what resources can be accessed and used. Update: Security vulnerabilities will always occur, so the key to addressing them is having a plan to address errors and release patches. Customers should also have options to secure devices quickly and effectively. Suggested solutions Engineers can include security and protection into IoT devices with early and perpetual testing throughout the design process. Most security breaches occur at endpoints or during updates, giving engineers a starting point for how to address them. Creating more secure devices Ensuring the security of connected devices should be of supreme importance for engineers as these devices are vulnerable to security breaches. The ultimate security of devices goes beyond the scope of engineering as the network and enterprise levels must also be secure to protect against potential threats. However, engineers play a role in this protection as well and should consider device security in the design process. Suggested solutions On a device level, engineers can help protect IoT devices from vulnerabilities by implementing early testing and continuing it throughout the design process. Most security transgressions occur at endpoints so this continual testing can, and should, create barriers to breaches. Regulations and compliance For IoT engineers, the complex web of regulations and compliance standards present new challenges Regulations and compliance surrounding data and technology are nothing new, but for IoT engineers, the complex web of regulations and compliance standards present new challenges. Engineers are already addressing obstacles in security and connectivity, all while meeting deadlines, and working around regulations adds time and expense to the process. Unfortunately, a failure to comply with global, regional, or local laws can lead to setbacks and fines. In addition to time lost in production and possible fines, the damage to a company’s reputation can lead to even more losses. Suggested solutions Compliance should be considered early and often in the design process. In the early stages of development, the IoT device or components can be tested to address and compliance issues. If possible, use a scalable and automated test system. The comprehensive solution As we stare at an uncertain future full of possibilities, it’s clear to see that new challenges will continue to be presented as technology evolves and new innovative devices are designed by engineers. By addressing these issues early and often, solutions can be implemented and problems prevented before they even have a chance to occur thanks to sound engineering and solid design.

Everbridge provides the critical event management platform to help organisations manage the full lifecycle of a crisis
Everbridge provides the critical event management platform to help organisations manage the full lifecycle of a crisis

The UK Government is consulting on plans to introduce a new law requiring operators of public spaces to consider the risk of a terrorist attack and take proportionate and reasonable measures to prepare for and protect the public from such an attack. Under the proposals outlined in the consultation document, those responsible for a publicly accessible location will have a ‘protect duty.’ The protect duty would apply to certain publicly accessible locations, widely defined as ‘any place to which the public or any section of the public has access, on payment or otherwise, as of right or by virtue of express or implied permission.’ Publicly accessible locations Publicly accessible locations include a wide variety of everyday locations such as: Sports stadiums, festivals and music venues, hotels, public houses, clubs, bars, casinos, high streets, retail stores, shopping centres, markets, schools, universities, medical centres, hospitals, places of worship, government offices, job centres, transport hubs, parks, beaches, public squares, other open spaces. This list is by no means exhaustive, but it does demonstrate the diverse nature of publicly accessible locations. To manage these challenges, some organisations are relying on guarding and manual solutions or processes Organisations responsible for publicly accessible locations have many challenges they need to overcome while at the same time ensuring that safety and security is visible, yet non-intrusive. To manage these challenges, some organisations are relying on guarding and manual solutions or processes, whereas other organisations have invested heavily in diverse security technologies: CCTV, access control, intruder alarms, fire detection, intercoms and more. Managing public safety Effectively managing public safety and security is difficult and can be costly. Potential liabilities are something to seriously consider, based on forthcoming regulation and prevailing public expectations. When a critical event unfolds public reactions can be difficult to safely manage, however this is now a must do. Public space operators need to get the right information to the right people at the right time to protect all people, including every single member of the public. Their work with public and private sector clients around the world has enabled them to understand ‘protecting the public’ challenges and offer solutions that meet the specific requirements. Public space operators and organisations must keep track of all emerging threats and assess the potential impacts of when, not if, they will experience a critical event. Unpredictable threat environment Security executives have the challenge of protecting people, facilities and assets With an increasingly complex and unpredictable threat environment, it has never been more imperative to act faster. With more complete intelligence, organisations can increase their speed and decisiveness to assess risks and prevent those risks from harming people or disrupting operations. Leisure and entertainment is a prominent UK industry, that is also one of the most vulnerable to safety and security threats. Security executives have the challenge of protecting people, facilities and assets, while also maintaining friendly and welcoming services to visitors. Public venues and retailers must provide non-intrusive client safety and security. For the would-be criminal, safety and security provision should be a visible deterrent. Balancing these needs is where Everbridge can help organisations. Everbridge provides the critical event management platform to help organisations manage the full lifecycle of a crisis. Facilitating device activation Their platform correlates events from disparate safety and security systems into a common operating picture to focus people’s attention on what really matters. The platform provides users with actionable alerts, next step actions, and automated reporting to better manage risks, ensure compliance with operating procedures and support the business continuity. Automated workflows ensure rapid, consistent responses, reducing the risk of human error Automated workflows ensure rapid, consistent responses, reducing the risk of human error. It also facilitates device activation to ensure they are always in operational control and protecting the people. Dynamic reports and dashboards provide real-time actionable insights for the operations teams and senior executives. Benefits include: Real-time situational awareness. Reduces risk. Accelerates response times. Avoids technology lock-ins. Prevents information overload. Keeps stakeholders informed. With Everbridge, the organisation can deliver the public protect duty. Now and in the future.