The former Almondvale Shopping Centre and the new Elements Square extension
Siemens Building Technologies Security Solutions were chosen to meet the demands of The Centre
Livingston in West Lothian, has been at the centre of a massive regeneration programme with substantial investment from Land Securities, one of the UK's leading real estate investments trusts. With a local shopping population that has grown by 70% since 1998, the former Almondvale Shopping Centre and the new Elements Square extension have been rebranded as The Centre - now one of the biggest shopping centres in Scotland.

Land Securities chose Siemens Building Technologies Security Solutions as technology partner, to enhance the customer experience and to future proof the security systems required to meet the demands of a contemporary retail and leisure development.

The original Almondvale Shopping Centre security system was installed over 15 years ago, prior to the redevelopment and extension of The Centre which began in 2006 and was completed in October 2008. In late 2005, Siemens entered into discussions with Land Securities to design and implement a phased three year upgrade, valued at over a million pounds, that would allow the system to be extended into two new car parks and Elements Square, the 375,000 sq ft extension.

Land Securities' technical services manager John McLean explains: "It was a challenging development project that involved ensuring the continuity of existing systems during the works. Siemens adopted a multi disciplined approach, working closely with the building services team, architects and contractors to ensure that our security systems were never compromised."

Siemens provided Land Securities with a managed service package which made allowance for key phases in the retail development scheduled to take place in 2007 and 2008.

Blane McConnell, Business Development Manager for Siemens Building Technologies Security Solutions, explains: "Our track record in working on complex multi-site developments, together with our innovative financing model meant that Siemens was perfectly placed to provide seamless support throughout the duration of the project."

The first phase involved the installation of PTZ Colour/Monochrome Dome cameras and fixed cameras to provide coverage of the new 2-storey ‘Centre Car Park 2'. Siemens created and installed a fibre communication network, which has the ability to transmit high definition images from multiple camera sites, providing a cost effective and secure solution.

Siemens' approach ensured that that The Centre's security systems were never compromised

Siemens were instrumental in the rebuilding of the new Comms Room and new Central Management Suite, where the number of cameras has increased four-fold with capacity for further expansion, when required. The Central Management Suite features a new monitor wall with sixteen 19" split screen TFT monitors and a central 40" ‘Event' TFT monitor. A separate console sits in front of the monitor wall and features two operator positions, each with a matrix control keyboard and two 15" TFT spot monitors.

The Central Management Suite is manned 24 hours a day by a team of security personnel. The team monitors and controls cameras not only throughout the shopping centre but also from an additional remote site at Dundee.

The existing 15-year-old camera matrix, with a finite capacity, was slow and cumbersome to use. It has been replaced with a new matrix and a new modular digital recording system.

John states: "Compared to the original 15-year-old recording system, the new system is unbelievably fast, there are three main reasons why it is proving invaluable. The clarity of the high definition images, speed of the retrieval of information and the fact that we have done away with paper handling as the data can be loaded straight onto disk."

Phase two consisted of the installation of new PTZ Colour/Monochrome Dome cameras and fixed cameras in new 4-storey state of the art The Centre Car Park 1. Additional cameras were installed in a link corridor to The Centre Car Park 2 from the additional shopping centre. Siemens installed another fibre communication network to support the required video and data transmission requirements. The DVR capacity was also increased to accommodate the new cameras.

John explains: "We have almost one million square feet to protect including wide pedestrian walkways, stairwells and parking areas. Our philosophy is to provide a security prevention service ensuring that all our customers feel safe and can shop with confidence. We have excellent safety standards with well lit access areas. Our car parks are brightly lit with music playing to add to the feeling of safety and protection."

 The Centre – one of the biggest shopping centres in Scotland
Siemens provides stylish security upgrade for Scottish retail & leisure development

The final, major phase of the development was designed in association with BDP Architects, Wallace Whittle and consultants, the Blackwood Partnership.

Elements Square was built with the modern day shopper in mind, featuring double height glass shop fronts, terracotta and zinc walls and granite flooring - to help give the feeling of shopping on the high street indoors, enabling customers to meet, relax and eat whatever the weather.

Siemens had to ensure that the front of house cameras all met with the architects' aesthetic requirements and included stainless steel finish PTZ dome cameras and unobtrusive bespoke grey painted fixed dome cameras. The finishes were required to fit the contemporary styling and blend with materials including zinc cladding and stainless steel as defined by the architects.

The DVR capacity was increased to accommodate the additional cameras and now features 15 x 16-channel recording servers that are now archived via 77 terabytes of RAID5 storage. Critical service spares including cameras, fibre transmission cards, monitors and DVR system components are held on site to minimize system down-time.

In October 2008, The Centre celebrated the opening of the latest major development, Elements Square and the rebranding of Almondvale Shopping Centre to The Centre. PTZ domes and fixed cameras were installed to cover all front and back-of-house areas and a fibre network was installed to link the signals from all the cameras back to the control and monitoring locations in The Centre Management Suite.

Today, the Centre accommodates over 155 units featuring many high street names including Debenhams, Marks & Spencer, River Island and Warehouse with restaurants including Wagamama, Ask, Nando's, reaching 80 per cent of Scotland's population within a one hour drive time.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Which technologies will disrupt the security industry in the second half of 2020?
Which technologies will disrupt the security industry in the second half of 2020?

The first half of 2020 has been full of surprises, to say the least, and many of them directly impacted the physical security market. The COVID-19 pandemic created endless new challenges, and the physical security market has done our part to meet those challenges by adapting technology solutions such as thermal cameras and access control systems. In the second half of 2020, we can all hope for a return to normalcy, even if it is a “new normal.” In any case, technology will continue to play a big role. We asked this week’s Expert Panel Roundtable: Which technologies have the greatest potential to disrupt the security industry in the second half of 2020?

What do you need to know about thermal imaging cameras?
What do you need to know about thermal imaging cameras?

As businesses, schools, hospitals and sporting venues look to safely reopen in a COVID-19 world, thermal imaging systems will play a critical role in helping to detect and distinguish skin temperature variations in people. Thermal surveillance, a mainstay of traditional physical security and outdoor perimeter detection, is now being deployed to quickly scan employees, contractors and visitors as part of a first line of defense to detect COVID-19 symptoms. In the coming weeks and months, the security industry will look to implement thermal camera solutions for customers, yet many questions remain as to the differences between different system types and how to properly install thermal imaging cameras. In this Q&A, Jason Ouellette, Head of Technology Business Development for Johnson Controls, answers several of these questions. Q: What are some of the different thermal imaging solutions available in the market to detect an elevated temperature in a person? For the general market, there are three types of these thermographic screenings. There is the handheld device, which is typically lower cost, very portable, and very easy to use. Typically, this is a point and shoot type of device, but it requires you to be three feet or less from the person that you're screening, which, in today's world, means the user needs to wear protective personal equipment. For the general market, there are three types of these thermographic screenings The second type of solution would best be described as a thermal camera and kiosk. The advantage of this system over a handheld device is this can be self-service. An individual would go up to and engage with the kiosk on their own. But many of these kiosk type solutions have some integration capability, so they can provide some type of output, for either turnstiles, or physical access control, but not video management systems (VMS). Some of the downside of this type of system is that it’s less accurate than a thermographic solution because it does not have a blackbody temperature calibration device and the readings are influenced by the surrounding ambient temperature, called thermal drift. So instead of being able to achieve a ±0.3ºC accuracy rating, this system probably provides closer to ±0.5ºC at best. Some of these devices may be classed as a clinical thermometer with a higher degree of one time accuracy, but do not offer the speed and endurance of the thermographic solution for adjunctive use. And then there are thermal imaging camera systems with a blackbody temperature calibration device. These types of systems include a dual sensor camera, that has a visual sensor and a thermal sensor built right into the camera, along with a separate blackbody device. This provides the highest degree of ongoing accuracy, because of the blackbody and its ability to provide continuous calibration. These systems can provide much more flexibility and can offer integrations with multiple VMS platforms and access control devices. Q: When installing a thermal imaging camera system what is the most important element to consider? Camera placement is critical to ensure the system works as expected, however the placement of the blackbody device which verifies the correct calibration is in place is equally as important. If the customer wants to follow FDA medical device recommendations for camera placement, both the height of the camera and the blackbody as well as the distance between these devices should comply with the product installation instructions. This takes into account the device focal range and calibration parameters in addressing the distance from the person undergoing the scan. Also, integrators should minimise camera detection angles to ensure optimal accuracy and install cameras parallel with the face as much as possible, and again in compliance with installation instructions. Integrators should minimise camera detection angles to ensure optimal accuracy The blackbody should be placed outside of the area where people could block the device and located more towards the edges of the field-of-view of the camera. You need to keep in mind the minimum resolution for effective thermographic readings which is 320 by 240 pixels as defined by the standards. To achieve this, you would need to follow medical electrical equipment performance standards driven by IEC 80601-2-59:2017 for human temperature scanning and FDA guidelines. Within that measurement, the face needs to fill 240 x 180 pixels of the thermal sensor resolution, which is close to or just over 50 percent of the sensor’s viewing area typically, meaning a single person scanned at a time in compliance with the standards for accuracy.  Along with height and distance placement considerations, the actual placement in terms of the location of the system is key. For example, an expansive glass entryway may impact accuracy due to sunlight exposure. Installations should be focused on ensuring that they are away from airflow, heating and cooling sources, located approximately 16 feet from entry ways and in as consistent of an ambient temperature as possible between 50°F and 95°F. Q: Once a thermal imaging camera system is installed, how do you monitor the device? There are several choices for system monitoring, depending on whether the solution is used as standalone or integrated with other technologies, such as intrusion detection, access control or video systems. For standalone systems, the ability to receive system alerts is typically configured through the camera’s webpage interface, and the cameras include abilities such as the live web page, LED display for alerting, audio alerts and physical relay outputs. When done right, these features will all follow cybersecurity best practices which is important for any network solution today, including changing default passwords and establishing authentication methods. The ability to receive system alerts is typically configured through the camera’s webpage interface These types of thermal cameras can also integrate with turnstile systems, VMS platforms and access control systems. This is typically done through the integration of a relay output, activated by a triggered temperature anomaly event on a thermal imaging camera which can then be used for activities such as locking a turnstile, or through access control and video systems to send an email or provide an automated contagion report for contact tracing. These capabilities and integrations extend the monitoring capability above that of the standalone solution. The camera can be configured to monitor a specific range of low and high alerts. Users can determine the actions that should be taken when that alert exceeds the preset low or high threshold. These actions include things like a bright and easy-to-see LED can provide visual notification through pulsing and flashing lights as an example. Q: What about system maintenance? Does a thermal imaging camera require regular service in order to operate accurately? First it’s important to make sure the system is calibrated. This can be done after the unit stabilises for at least 30 minutes to establish the initial reference temperature source known as the blackbody. Calibrations conducted before this warm up and stability time period can throw off accuracy. Also, as part of your system maintenance schedule you will want to perform a calibration check of the blackbody device every 12 months, along with following recommendations of the FDA and IEC. If you install the solution and don’t perform maintenance and the blackbody calibration certificate expires, over time there’s a risk that the device will experience drift and a less accurate reading will result. There’s a risk that the device will experience drift and a less accurate reading will result Q: What final pieces of advice do you have for either an integrator who plans to install a thermal imaging camera system or an end user who plans to invest in this solution? Before you buy a thermal imaging camera check to see if the manufacturer ships the camera with a calibration certificate. Also, become familiar with FDA’s guidance released in April 2020, Enforcement Policy for Telethermographic Systems During the Coronavirus Disease 2019 (COVID-19) Public Health Emergency. This document places thermal/fever products for adjunctive use under the category of a Class I medical devices and subject to its regulatory control. Driven by these regulations and categorisation, users need to understand specifically what is required to meet the required level of accuracy for successful detection. While thermal imaging camera systems are more complex than traditional surveillance cameras, they can prove to be a valuable resource when set up, configured and maintained properly.

Recognising the importance of security officers to promote safety
Recognising the importance of security officers to promote safety

The general public doesn’t give much thought to the important role of security officers in creating and promoting safer environments. The low-profile work of security officers is vital to protecting people, places and property. During the pandemic, newer aspects to that role have emerged. Security personnel have been called on to perform diverse tasks such as managing queues at the supermarket, safeguarding testing centres and hospitals, ensuring food deliveries, and supporting police patrols. The British Security Industry Association (BSIA) and two other organisations in the United Kingdom are joining forces to raise awareness of the work of security officers and to recognise the vital importance of the duties they perform. BSIA, a trade association, includes members who are responsible for 70% of privately provided UK security products and services, including security guarding, consultancy services, and distribution and installation of electronic and physical security equipment. BSIA, the Security Institute and the Security Commonwealth Joining BSIA in the awareness campaign are the Security Institute, a professional security membership body; and the Security Commonwealth, which is comprised of 40 organisations from across the security landscape with common objectives to build professionalism, raise standards and share best practices. “The recognition of security officers as key workers is the start of a re-appraisal of what service they provide to the community in keeping the public safe and secure,” says Mike Reddington, BSIA Chief Executive. “As we exit lockdown and have to navigate public spaces again, [security officers] will have a crucial role in supporting public confidence. We are working closely with the Police and all other public bodies to find the best way to achieve this.” Security officers acknowledged as key workers The campaign will showcase security professionals as a respected, valued, professional service provider and a key worker that is acknowledged and embedded in daily lives. The British Security Industry Association (BSIA) and two other organisations in the United Kingdom are joining forces to raise awareness of the work of security officers “Great effort has been invested in the professional standards and capabilities of frontline [security] officers, and they have proven their worth during the coronavirus crisis in the UK,” says Rick Mounfield, Chief Executive, the Security Institute. “They, along with the wider security sector, deserve to be recognized, respected and appreciated for the safety and security they provide across the United Kingdom.” “[We are working to] build professionalism, raise standards and share best practices, and I hope this campaign can make more people recognise the changes we have all made and continue to make,” says Guy Matthias, Chairman of the Security Commonwealth (SyCom). The industry will be reaching out to companies, professionals, and organisations in the sector to participate in the campaign. The hope is that, over the coming weeks as lockdown is eased, the industry can play its part to ensure that the country emerges with confidence to start to recover and build for the future. Private security more important than ever The campaign will showcase security professionals as a respected, valued, professional service provider Across the pond in the United States, law enforcement professionals are facing a crisis of confidence during a time of civil unrest as protestors call to “defund the police” and to otherwise undermine and/or recast law enforcement’s role in preserving the peace and ensuring public safety. If an upshot is that public policing is starved of resources, the role of private security to supplement their mission is likely to increase. In short, the role of private security is more important than ever on both sides of the Atlantic. Public recognition of that role is welcome, obviously. In any case, the importance of their role protecting people, places and property has never been greater.