Southeastern Rail Network operates train services between London, Kent and parts of East Sussex. It is one of the busiest networks in the country, transporting 640,000 passengers each weekday on its 392 trains, which are temporarily housed in 12 depots situated around South-East England. Some of these depots are unmanned, and therefore require intelligent security solutions.

Bosch Security System’s Integration Partner, Taylor Technology Systems, were tasked with upgrading the entire video surveillance system across the 12 depots. The legacy analogue surveillance system had come to the end of its service life and was overdue for an upgrade. A state of the art IP based system was required to deliver upon the clients requirements for all the depots to be fully monitored 24/7.

Tracking train arrivals departures

A fully integrated solution was required that could provide all of this while also reducing costs

An upgrade to an IP camera solution can provide vastly improved image quality, wider coverage and wireless capability, along with Intelligent Video Analytics and high levels of data security encryption. The primary challenge that needed to be solved by the video surveillance solution was securing the 5 unmanned depots. Some of these sites had previously been subject to thefts due to unauthorised entry via the main entrances.

All access gates therefore needed to be monitored 24/7, ensuring that all personnel, or vehicles, entering the sites are tracked and reported. This includes all deliveries to onsite buildings as well as tracking all train arrivals and departures. A fully integrated solution was required that could provide all of this while also reducing costs.

High clarity video in low-light levels

A critical factor was that the video surveillance solution had to be able to work unimpeded throughout the night. The installed video technology therefore needed to provide high clarity video in low-light levels, whilst also still ensuring that the Intelligent Video Analytics worked as required.

The camera portfolio installed across the 12 depots included FLEXIDOME IP starlight 7000 VR, DINION IP starlight 7000 HD and AUTODOME IP starlight 7000 HD cameras. These cameras are all equipped with Bosch’s Intelligent Video Analytics solutions ensuring that the most relevant video data can be precisely applied to the requirements of the train depots.

Network surveillance systems

Some surveillance cameras are using a digital trip wire to identify movement at perimeters

These analytics solutions allow video surveillance to go further than just security applications, using statistics in the form of metadata for purposes such as perimeter control and vehicle tracking. Using Camera Trainer, a built-in machine learning capability, surveillance cameras can also be taught to recognise and detect stationary objects or certain situations instead of being triggered by motion alone.

As an integral part of this end-to-end Bosch solution, all recording from the depots is remotely managed using DIVAR IP all-in-one 7000 recorders – an all-in-one recording, viewing and management solution for network surveillance systems. To combat unauthorised entry to unmanned sites, the IP cameras are using Intelligent Video Analytics to prevent security breaches before they occur. Some surveillance cameras are using a digital trip wire to identify movement at perimeters.

In-built Intelligent Video Analytics

If movement is detected, an alert is sent to security personnel who are able to view the recording and respond straight away. Intelligent Video Analytics from Bosch are able to differentiate between genuine security events and false-triggers, meaning that security alerts are dependable and reliable. In-built Intelligent Video Analytics went further in this application; to monitor train movements, track deliveries inside the depot and provide access to staff.

Taylor Technology Systems carried out the installation and configuration of this solution

The AUTODOME IP starlight 7000 HD cameras were installed on gantries over train tracks and were the ideal PTZ solution, as they can continue tracking while panning, tilting or zooming. All cameras with starlight technology continue to deliver full intelligent analytics at night and in low light levels. The cameras installed around the depots are able to provide colour filtering down to 0.0077 lux or deliver detailed monochrome images where other cameras show no image at all.

Expert installation and integration

Taylor Technology Systems, a member of our Installer and Integrator Partnership Programme, carried out the installation and configuration of this solution. They expertly delivered the installation project at active depots while keeping the legacy system working. The team worked with Southeastern to arrange complex line blockages so they could install the equipment safely without affecting the day-to-day operation of the railway.

To complete the project, engineers from Taylor Technology Systems completed comprehensive training courses on the Bosch Video Management System, allowing seamless management of the digital video across IP Networks. This ensured that the Bosch technology was installed exactly to specification.

Ensuring site safety

The Taylor Technology engineers worked to a professional high standard by ensuring site safety"

Taylor Technology Systems have been awarded a Bosch Outstanding Achievement Award for their work on this project.

“Taylor Technology Systems deployed a full suite of servers and IT equipment with Bosch CCTV Platform across several sites to ensure security was enhanced due to end of life equipment. With full in-depth training, the Taylor Technology engineers worked to a professional high standard by ensuring site safety was paramount during the 6 month project that was on time and within budget", says Steve Martin, Project Manager, Southeastern

With built-in analytics in all cameras, this end-to-end Bosch solution lowered costs for the end-user. Installation, configuration and maintenance were also eased, as pre-configured default settings can be used in applications such as vehicle tracking and perimeter detection. The guaranteed top build quality from Bosch, combined with expert installation, ensures that this is a long-term solution for Southeastern.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

COVID-19 worries boost prospects of touchless biometric systems
COVID-19 worries boost prospects of touchless biometric systems

Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads. No longer in favour are contact-based modalities including use of personal identification numbers (PINs) and keypads, and the shift has been sudden and long-term. Both customers and manufacturers were taken by surprise by this aspect of the virus’s impact and are therefore scrambling for solutions. Immediate impact of the change includes suspension of time and attendance systems that are touch-based. Some two-factor authentication systems are being downgraded to RFID-only, abandoning the keypad and/or biometric components that contributed to higher security, but are now unacceptable because they involve touching. Touchless biometric systems in demand The trend has translated into a sharp decline in purchase of touch modality and a sharp increase in the demand for touchless systems, says Alex Zarrabi, President of Touchless Biometrics Systems (TBS). Biometrics solutions are being affected unequally, depending on whether they involve touch sensing, he says. Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads “Users do not want to touch anything anymore,” says Zarrabi. “From our company’s experience, we see it as a huge catalyst for touchless suppliers. We have projects being accelerated for touchless demand and have closed a number of large contracts very fast. I’m sure it’s true for anyone who is supplying touchless solutions.” Biometric systems are also seeing the addition of thermal sensors to measure body temperature in addition to the other sensors driving the system. Fingerscans and hybrid face systems TBS offers 2D and 3D systems, including both fingerscans and hybrid face/iris systems to provide touchless identification at access control points. Contactless and hygienic, the 2D Eye system is a hybrid system that combines the convenience of facial technology with the higher security of iris recognition. The system recognises the face and then detects the iris from the face image and zeros in to scan the iris. The user experiences the system as any other face recognition system. The facial aspect quickens the process, and the iris scan heightens accuracy. TBS also offers the 2D Eye Thermo system that combines face, iris and temperature measurement using a thermal sensor module. TBS's 2D Eye Thermo system combines face, iris and temperature measurement using a thermal sensor module Another TBS system is a 3D Touchless Fingerscan system that provides accuracy and tolerance, anti-spoofing, and is resilient to water, oil, dust and dirt. The 2D+ Multispectral for fingerprints combines 2D sensing with “multispectral” subsurface identification, which is resilient to contaminants and can read fingerprints that are oily, wet, dry or damaged – or even through a latex glove. In addition, the 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue. The system fills the market gap for consent-based true on-the-fly systems, says Zarrabi. The system captures properties of the hand and has applications in the COVID environment, he says. The higher accuracy and security ratings are suitable for critical infrastructure applications, and there is no contact; the system is fully hygienic. Integration with access control systems Integration of TBS biometrics with a variety of third-party access control systems is easy. A “middleware” subsystem is connected to the network. Readers are connected to the subsystem and also to the corporate access control system. An interface with the TBS subsystem coordinates with the access control system. For example, a thermal camera used as part of the biometric reader can override the green light of the access control system if a high temperature (suggesting COVID-19 infection, for example) is detected. The enrollment process is convenient and flexible and can occur at an enrollment station or at an administration desk. Remote enrollment can also be accomplished using images from a CCTV camera. All templates are encrypted. Remotely enrolled employees can have access to any location they need within minutes. The 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue Although there are other touchless technologies available, they cannot effectively replace biometrics, says Zarrabi. For example, a centrally managed system that uses a Bluetooth signal from a smart phone could provide convenience, is “touchless,” and could suffice for some sites. However, the system only confirms the presence and “identity” of a smart phone – not the person who should be carrying it. “There has been a lot of curiosity about touchless, but this change is strong, and there is fear of a possible second wave of COVID-19 or a return in two or three years,” says Zarrabi. “We really are seeing customers seriously shifting to touchless.”

How to maximise your body temperature detection systems
How to maximise your body temperature detection systems

There are many companies jumping into selling temperature detection systems to the state, local governments, hospitals, airports and local businesses, but do they know how to drive one? Anyone can get behind a car and drive it into a wall by accident. The same can happen with a temperature detection system.  The first thing you should ask is “does my firm have a certified thermographer?”. If not, the firm are at risk of getting a low quality system that is being resold to make quick cash. Businesses that are doing this do not know how to operate it properly. Asking the right questions Secondly, you should ask whether the system is NDAA compliant. NDAA compliance means that your temperature detection equipment is protected by U.S. law. Does your system have a HSRP device (blackbody)? HSRP (Heat Source Reference Point) is a device that will allow the camera to detect the correct temperature a distance. Even if the room temperature does change throughout the day, treat it as a reference point for the camera to know the temperature at that distance. Can your system scan mutliple people at once? Can your system scan mutliple people at once? This is a bad question but often asked since most systems will say yes. For ease, everyone wants to scan many people at once, but the best practice according to FDA and CDC guidelines is to run one person at a time for best accuracy. Why? The HSRP (blackbody) device tells the camera what the correct temperature is at a given distance away from the camera. Every foot you are away from the HSRP device will be off by 0.1 degrees roughly. If you are in a room full of people, let's say 6, in view of the camera, every person that is not next to the HSRP device (5) will be given an inaccurate reading. Hence why it is so important to run the system correctly with just one person at a time. You will also need to follow the 6 feet rule. If you take that into consideration, one at a time at 6 feet apart, the device should tell you how you need to run the system. Sensitivity of thermal imaging Is your system’s sensor accurate enough? The FDA recommends an error of ±0.5°C or better. When looking for a system, make sure it is better than what they recommend. I would recommend ±0.3°C or better. Do not purchase a system over ±-.5°C degrees as you are doing yourself and your customers or employees an injustice.  Another thing to look at is how many pixels it can determine the temperature from. Some cameras can only tell the temperature of 6 points on the screen, whilst others can take a temperature reading from each pixel. Take a 384x288 camera, for example, which would be over 110,000 points of temperature taking on a single image.      Thermal cameras are very sensitive, so there are a lot of do’s and don’ts. For example, the system cannot see through glasses or hats. On the below image you can see a person with the visual camera on the right, whilst on the left side is through a thermal camera.  Both are pointing at the same area. It is clear the person on the left side is “invisible” to the thermal imaging camera. Demonstrating the sensitivity of thermal imaging If you are a company who wants to detect the temperature of customers or employees though the front door, window or a car window, the answer would be no. You need a clear line of sight without any interference to scan for temperatures. Other things you need to look out for is wind and distance away from the HSRP (blackbody) device. Air and distance away from the HSRP device will make the system less and less accurate the more space between the device. Air and distance away from the HSRP device will make the system less and less accurate Thermal imaging and COVID-19 If you have a clear line of sight, is there anything I need to know? The answer is yes. Reflective materials such as metal can interfere with your temperature readings. Reflective materials are easily picked up from the thermal side so pointing at a medal, glass or anything reflective can cause inaccuracies within the system. In the age of COVID-19, temperature detection systems are more important than ever. Organisations must get a system in place to help scan for high temperatures in order to reduce the spread of the virus.

What are the security challenges of the oil and gas market?
What are the security challenges of the oil and gas market?

Protecting the oil and gas market is key to a thriving economy. The list of security challenges for oil and gas requires the best technology solutions our industry has to offer, from physical barriers to video systems to cybersecurity. We asked this week’s Expert Panel Roundtable: what are the security challenges of the oil and gas market?