Located in the Southern Vietnamese metropolis of Ho Chi Minh City, the Deutsches Haus office tower is a symbol of cooperation between Germany and Vietnam. Opened in September 2017, it is the country’s first building to earn LEED (leadership in energy and environmental design) Platinum environmental certification and serves as a cultural, commercial and diplomatic hub in the region.

Next to the Consulate General of the Federal Republic of Germany the 25-story building with a 40,000-square-meters floor area is home to regional offices of international firms such as VISA, Adidas, Schneider Electric, and Bosch Vietnam. As premium amenities, Deutsches Haus also features a gourmet cafe, multifunctional conference and events area, health club, and rooftop restaurant.

Creating a challenging security environment

Deutsches Haus needs to meet the highest security demands: All security systems, including security guard teams

From a security manager’s perspective, this multi-use blend of diplomacy, business, and leisure facilities – in a building fully accessible to the public – creates a challenging security environment. As the seat of the Consulate General of the Federal Republic of Germany, Deutsches Haus needs to meet the highest security demands: All security systems, including security guard teams, have to be approved by the Federal Foreign Office of Germany.

Adding to the challenge, Deutsches Haus is located opposite from the Consulate General of the United States of America – and in close vicinity to the Consulate General of France and the British Consulate General – on a busy intersection between two main streets. Therefore, monitoring pedestrians and automobile traffic on the building’s perimeter is just as crucial to end-to-end security as tracking public and high-security areas on the inside.

Detecting security events automatically

In search of an adequate video security solution, the team at Deutsches Haus knew that high-definition cameras alone would not suffice. The reason: When several hundred cameras are required to secure an area of this size, personnel tend to be overwhelmed by the amount of video feeds. After only 20 minutes, the average operator misses 90 percent of important scenes, as studies have proven.

Bosch experts covered the building and its perimeter with network security cameras For this reason, modern IP security cameras feature Intelligent Video Analytics – using algorithms and AI-based image recognition – to support operators by detecting security events automatically. Bosch experts covered the building and its perimeter with network security cameras featuring built-in Intelligent Video Analytics. Indoor areas like the entrance doors, reception area, lobby, café, as well as parking garages and corridors to the fire escape staircases are monitored by over 170 DINION IP starlight 7000 HD and FLEXIDOME IP panoramic 7000 MP cameras.

Alerting security personnel of illicit behaviour

The building’s elevators are also protected by Bosch cameras. Thanks to built-in-intelligence, IP cameras automatically alert security personnel of illicit behaviour, for instance persons accessing restricted areas. The building’s perimeter and parking lot are safeguarded outdoor-approved AUTODOME IP starlight 7000 HD cameras with pan-tilt-zoom (PTZ) capabilities.

Integrated with a third-party solution to open barriers for authorised vehicles, the cameras can automatically track moving objects such as cars and pedestrians – and warn personnel of threats – with their 30x zoom lens while obtaining images under low light conditions via Bosch starlight technology combined with Intelligent Video Analytics. As a key requisite, the networked cameras are able to withstand the city’s four-month rain period and prove resistant to vandalism.

Enhancing safety of building occupants

The staff can easily announce and notify a building guest about a forgotten purse which was left in the café

PAVIRO, the Public Address and Voice Evacuation system of Bosch was installed in the building for the safety of building occupants. The PAVIRO solution makes it possible for occupants to feel safe in the building while enjoying high quality music and excellent Public Address speech intelligibility.

The staff can easily announce and notify a building guest about a forgotten purse which was left in the café. To make building evacuations as efficient as possible, the PAVIRO solution provides phased evacuation: automated messages direct occupants to immediate safety. Next to this, building occupants and guests can also enjoy high-quality music in the rooftop restaurant, café, health club and event areas which of course contributes to the nice building atmosphere.

Providing government-grade security

For the building owner, PAVIRO can establish long-term cost-saving and minimise total cost of ownership. The system is especially eco-friendly because less amplifiers are needed due to power-load sharing of the amplifier architecture, which in turn requires fewer batteries.

Since opening day, the Bosch system has provided government-grade security at Deutsches Haus in Ho Chi Minh City. “I am proud to have Bosch both as a tenant and as a brand who secures Deutsches Haus with their high quality and reliable video security cameras and sound systems,” added Ryan Lower, Property Director, Colliers International – Deutsches Haus. While meeting the challenge of securing diplomatic and enterprise assets in a publicly accessible building, the future-proof solution provides an important reference in this dynamic market.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

What are the physical security challenges of smart cities?
What are the physical security challenges of smart cities?

The emergence of smart cities provides real-world evidence of the vast capabilities of the Internet of Things (IoT). Urban areas today can deploy a variety of IoT sensors to collect data that is then analysed to provide insights to drive better decision-making and ultimately to make modern cities more livable. Safety and security are an important aspect of smart cities, and the capabilities that drive smarter cities also enable technologies that make them safer. We asked this week’s Expert Panel Roundtable: what are the physical security challenges of smart cities?

Access control systems: Ethernet vs proprietary bus network cabling
Access control systems: Ethernet vs proprietary bus network cabling

When designing a security system for a site, the question of how it should be interconnected is often one of the first you need to answer. Should you choose a system that has its own proprietary bus network, which might require twisted pair cabling, or perhaps one based on an ethernet backbone? Both types of network have their advantages and disadvantages as discussed below. Ethernet connectivity Some security systems are based on a number of modules, and each module is connected to its own ethernet connection. One big advantage of a system like this is that, in many cases, it can be much more convenient, allowing the installer to utilise existing network cabling and other infrastructure, rather than needing to install new cabling. On the other hand, if a security system relies entirely on networking infrastructure controlled by others, typically the IT department, then the stability and reliability of the security system is dependent on that network being available when your system needs it. The stability and reliability of the security system is dependent on that network being available Another potential disadvantage is that certain areas of the premises may not be equipped with a nearby network outlet, and if the network in question is not managed by you, it might be necessary to request the IT department add an outlet for you to use. Proprietary bus connectivity A system with its own proprietary bus network can also have advantages. Perhaps the first and most important difference is that, because the network cabling is installed specifically for the security system, the designer has the luxury of being able to decide exactly where the wiring should be placed and terminated. Another advantage is that the cabling would only be used by the security system, so the installation company can be sure the network will always be available, and there would be very little chance part of it could be accidentally unplugged. Another potential advantage is that some systems are able to run bus cabling of distances well over 1,000 metres, whereas individual ethernet connections are typically limited to 100 metres or less. Another consideration, which applies particularly to intruder and holdup alarm systems, is that communications between elements of the security system should not be prevented by other factors, such as a power failure. Obviously, if a part of such a network is formed by ethernet infrastructure, such as network switches and/or media converters, then that infrastructure needs to be battery backed, and the power supply must be monitored. In some cases, the equipment must be able to withstand a power failure of 24 or even 60 hours. Such long standby times are unusual in IT infrastructure, but are quite common in the case of security systems. The equipment must be able to withstand a power failure of 24 or even 60 hours How this all fits together When selecting a system, it is usually most helpful to have a flexible system that can support a number of different deployment options. This is especially true if the system in question can support a combination of different interconnection types. For example, a single system that can contain a variety of interconnections can then be deployed in a very wide variety of systems where existing infrastructure may be used to aid in the design and deployment: Fibre connections – Many modern sites are pre-cabled with existing fibre connections which can be used to form a dedicated interconnection between system components which can be of the order of kilometres apart. Ethernet connectivity – With the increasing ubiquity of networking within premises, some elements of a security system can be deployed using the existing infrastructure. Repeater - For very large or densely packed systems, a device that can be used as a form of “repeater” can be extremely useful to permit very long interconnect cabling distances. Systems can be formed by utilising a fusion of all of the above connectivity methods Some security systems can be set up to enable multiple discrete access control modules to be deployed, connected to an existing ethernet network, and treated as a single ‘system’ by the management software, while retaining full offline functionality in the event the network becomes unavailable. Further, some systems can be formed by utilising a fusion of all of the above connectivity methods. In practice, of course some applications would suit a deployment that relied solely on ethernet connectivity. Some other applications, especially systems or parts of systems that are part of an intruder and/or holdup alarm system, would better suit a deployment using a dedicated proprietary bus network, and other systems would suit a combination of these communications options. Selecting a system that can be deployed in a variety of ways can be enormously helpful in providing the flexibility projects might demand.

Functionality beyond security: The advent of open platform cameras
Functionality beyond security: The advent of open platform cameras

The coronavirus (COVID-19) pandemic marks the biggest global disruption since World War II. While the ‘new normal’ after the crisis is still taking shape, consumers are apprehensive about the future. According to a recent survey, 60% of shoppers are afraid of going grocery shopping, with 73% making fewer trips to physical stores. Returning to the workplace is also causing unease, as 66% of employees report feeling uncomfortable about returning to work after COVID-19.  Businesses and employers are doing their best to alleviate these fears and create safe environments in and around their buildings. This also comes at tremendous costs for new safety measures and technologies – including updates to sanitation protocols and interior architecture – that protect against COVID-19. Costs in the billions that most businesses will face alone, without support from insurance and amidst larger macroeconomic challenges. Saving costs and increasing security But what if building operators, retail shop owners, and other stakeholders could save costs by leveraging new functionality from their existing security infrastructure? More specifically, expanding the use of current-generation security cameras – equipped with AI-driven image analysis capabilities – beyond the realm of security and into meeting new health regulations. This is exactly where video analytics algorithms come into play. And in the next step, a new evolutionary approach towards open security camera platforms promises new opportunities. Security cameras have evolved from mere image capturing devices into complex data sensors Over the past decade, security cameras have evolved from mere image capturing devices into complex data sensors. They provide valuable data that can be analysed and used in beneficial ways that are becoming the norm. Since 2016, Bosch has offered built-in Video Analytics as standard on all its IP cameras. On one hand, this enables automated detection of security threats more reliably than human operators. And on the other hand, video analytics collect rich metadata to help businesses improve safety, increase efficiency, reduce costs, and create new value beyond security. Expanding camera functionality beyond security Today, we have ‘smart’ security cameras with built-in video analytics to automatically warn operators of intruders, suspicious objects and dangerous behaviors. The rich metadata from several cameras on the same network can also be consolidated by making use of an intelligent software solution. It offers so-called pre-defined widgets to provide business intelligence by measuring area fill levels, counting building occupancy and detecting the formation of crowds. In combination with live video stream data, these insights enable heightened situational awareness to security operators. What’s more, operators are free to set their own parameters – like maximum number of occupants in a space and ‘off limit’ areas – to suit their needs. These user-centric widgets also come in handy in dealing with the coronavirus pandemic. Specific widgets can trigger an alarm, public announcement or trigger a 'traffic light' when the maximum number of people in a space is exceeded. Building operators can also use available intelligence such as foot traffic ‘heat maps’ to identify problem areas that tend to become congested and place hand sanitiser stations at heavily frequented hotspots. At the same time, the option to perform remote maintenance on these systems limits the exposure of technicians in the field during the pandemic. Again, the underlying camera hardware and software already exist. Cameras will be able to ‘learn’ future functionality to curb the spread of the coronavirus Looking ahead, cameras with video analytic and neural network-based analytic capabilities will be able to ‘learn’ future functionality to curb the spread of the coronavirus. For instance, cameras could monitor distances between individuals and trigger voice announcements when social distancing guidelines are violated. Facial recognition software can be trained to monitor personal protective equipment (PPE) compliance and sound alerts for persons entering buildings without masks. The technical requirements are already in place. The task at hand is to deliver these new functionalities to cameras at scale, which is where open camera platforms hold the key. Why open camera operating systems? When it comes to innovating future camera applications that extend beyond security, no hardware manufacturer should go at it alone. Instead, an open platform approach provides the environment for third-party developers to innovate and market new functions. In essence, an open platform principle allows customers and users to change the behavior of devices by adding software afterwards. This software can either be found in an app store or can be self-developed. For a precedent, we can look at the mobile phone industry. This is where software ecosystems like Android and Apple’s iOS have become the norm. They have also become major marketplaces, with the Apple App Store generating $519 billion in billings on 2019, as users use their phones for far more than just making phone calls. In the same way, intelligent cameras will be used far beyond classic video applications in the future. To get there, adopting an open platform principle is essential for a genuine transformation on an industry level. But establishing an open platform principle in the fragmented video security industry demands a cooperative approach. In 2018 Bosch started a fully owned start-up company, Security & Safety Things, and became one of five founding members of OSSA (Open Security & Safety Alliance). With more than 40 members, the Alliance has collectively created the first Technology Stack for “open” video security devices. This includes the OSSA Application Interface Specification and Compliant Device Definition Specification. An open camera platform for innovating future functionality  Based on OSSA’s common APIs, collective approach on data security and core system requirements for video security cameras, the first camera manufacturers were able to build video security cameras that adopt an open platform principle. Further fueling innovation, OSSA focused on driving the creation of one centralised marketplace to unite demand and supply in the market. Camera devices that are built in accordance with OSSA’s Technology Stack, so-called “Driven by OSSA” devices, can benefit from this marketplace which consists of three pillars: a development environment, an application store, and a device management portal. Security & Safety Things has advanced OSSA’s open camera platform concept, built this marketplace for the security and safety industry and has developed the open OS that powers the first “Driven by OSSA” devices. Making it quick and simple to customise security solutions by installing and executing multiple apps This year, Bosch, as one of the first camera manufacturers, introduces the new INTEOX generation of open platform cameras. To innovate a future beyond security functionality, INTEOX combines built-in Intelligent Video Analytics from Bosch, an open Operating System (OS), and the ability to securely add software apps as needed. Thanks to the fully open principle, system integrators are free to add apps available in the application store, making it quick and simple to customise security solutions by installing and executing multiple apps on the INTEOX platform. In turn, app developers can now focus on leveraging the intelligence and valuable data collected by analytics-equipped cameras for their own software developments to introduce new exciting possibilities of applying cameras. These possibilities are needed as smart buildings and IoT-connected technology platforms continue to evolve. And they will provide new answers to dealing with COVID-19. The aforementioned detection of face masks and PPE via facial detection algorithms is just one of manifold scenarios in which new apps could provide valuable functionality. Contact tracing is another field where a combination of access control and video analytics with rich metadata can make all the difference. Overall, open camera platforms open a future where new, complex functionality that can save lives, ensure business continuity and open new business opportunities will arrive via something as simple as a software update. And this is just the beginning.