Today’s market wants access control systems that are always available, scalable, and integrated with other security solutions like video and intrusion systems to ensure the highest security and safety levels. At the same time, these systems must be easy to configure and use. With the introduction of the Access Management System 3.0, Bosch meets all of these requirements.

Always available for security

Access Management System 3.0 is designed to be available at all times. Its resilient design includes a Master Access Controller (MAC) as an additional layer of defence between the server and the access controllers.

If the server fails, the MAC takes over, ensuring continuous communication across controllers while sharing necessary information from the card readers. In addition, access control functionalities that involve multiple access readers, such as anti-passback and guard tour can continue to perform.

The anti-passback functionality is an important feature to ensure a high level of security. It prevents a cardholder from passing a card to another person enabling an unauthorised entry. Guard tour is a safety functionality offered to security guards, which uses access readers as checkpoints along a defined route at specified times.

Threat level management

The different threat levels can make all doors open, or all doors blocked, or a mix of open and blocked

Any deviation of sequence or timing causes an alarm in the Access Management System. Immediate notifications to colleagues or first responders increase the safety of security guards. In the rare event that both the Access Management System 3.0 server and the MAC fail, cardholders can still enter and leave areas with their badges because the database is stored directly on the Access Management Controllers (AMCs).

Thanks to this offline capability, it is possible to save millions of events even during downtimes, ensuring the continuous availability of the system. Access Management System 3.0 offers up to 15 configurable threat levels such as lockdown, controlled lockdown, or evacuation, which means safety measures can be initiated quickly in critical situations such as fire or security breach.

The threat level state is activated by one of three triggers: operator workstation, external contact such as an emergency button, or specially configured “emergency” cards that are presented to a reader. The different threat levels can make all doors open, or all doors blocked, or a mix of open and blocked.

Scalable and future-proof

Users can start small and add extra capacity whenever necessary. The Access Management System 3.0 software can be expanded up to 10,000 doors and 200,000 cardholders. The software is offered in three pre-configured software bundles from medium to large organisations: Lite (max. 144 doors), Plus (max. 512 doors), and Professional (max. 10,000 doors). All bundles support up to 200,000 cardholders.

No hardware needs replacing when expanding; users only require software upgrades and possibly additional controllers, readers, and cards. So, increasing the system is also cost-efficient. Customers who work with the software solution Access Professional Edition (APE) from Bosch can migrate to the Access Management System 3.0 by using the new importer/exporter tool. Together with regular updates to data security enhancements, these features make the system a future-proof investment - suitable for office and government buildings, retail environments, educational institutions, and more.

Easy configuration and operation

Access Management System 3.0 also has trusted digital certificates for mutual authenticationConfiguration is easy: Users can import existing floor maps into the system, and drag and drop icons on the map to represent controllers, doors, and building objects. User onboarding is straightforward. For example, enrolment and assignment of access profiles are all implemented in one dialogue manager.

Operation is smooth: The graphical user interface (GUI) is simple and easy to understand. The dark colour scheme of the GUI reduces eye-strain and fatigue, so operators stay fresh and alert.

Access Management System 3.0 offers protection against cybercrime and loss of personal data. The database, as well as the communication between the server and access controllers, is encrypted at all stages through the support of the secure Open Supervised Device Protocol (OSDP) v2 protocol. Access Management System 3.0 also has trusted digital certificates for mutual authentication between the server and client to prevent tampering by unauthorised clients and uses secure design principles such as “secure-by-default” and “principle of least privilege.”

Integration with third-party solutions

Access Management System 3.0 is ideal as a standalone solution to meet today’s access control needs. It integrates seamlessly with Bosch B Series and G Series intrusion control panels as well as with video systems such as Bosch Video Management System or third-party systems like Milestone’s XProtect for increased security and enhanced situational awareness.

The integrated command and control functionality enables operators to arm and disarm intrusion panels directlyIntegration with Bosch Video Management System (version 10.1 and higher) offers manual video verification to increase the security level at doors. The operator can visually verify whether the person at the door matches the registered person in the database. If so, the operator allows the person to enter. Bosch Video Management System integration also enables searching for cardholder events and events at doors.

With the searching functionality, it is possible to quickly check who has entered an area and at what time. Moreover, access commands and events can be handled in Bosch Video Management System, making the operation of the integrated system most efficient.

Intrusion control panels integration

B and G Series intrusion control panels integrate seamlessly into Access Management System 3.0 for efficient authorisation management and a central overview of all access and intrusion events. With central user management, operators can add, delete, and modify intrusion-related user passcodes and authorisations directly into the system, as well as organise users by groups or functionalities.

The integrated command and control functionality enables operators to arm and disarm intrusion panels directly in the Access Management System 3.0 user interface as well as to see states of the areas (e.g. “armed”, “ready to arm”) and detectors (e.g. “motion detected”) on the system map. This provides operators with a central overview of all access and intrusion states, allowing them to easily and remotely handle intrusion events.

Bosch Access Management System 3.0 is available for sale and makes access management simple, scalable, and always available.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Beyond video analytics, what are the benefits of AI and machine learning?
Beyond video analytics, what are the benefits of AI and machine learning?

Artificial intelligence (AI) and machine learning have made a big splash in the physical security market, transforming video analytics to a new level of accuracy. In fact, the terms have become common buzzwords throughout the industry. However, the potential for AI and machine learning to impact the physical security industry goes far beyond their ability to improve video analytics. We asked this week’s Expert Panel Roundtable: Beyond better video analytics, how can artificial intelligence (AI) and/or machine learning benefit the physical security market? 

Wireless technology is transforming motion detection
Wireless technology is transforming motion detection

Motion detection is a key feature of security systems in residential and commercial environments. Until recently, systems have relied heavily on closed circuit television (CCTV) and passive infrared (PIR) sensors, which both require significant investment and infrastructure to install and monitor. Developments in wireless technology are increasing home security possibilities. Few years ago, these developments led Cognitive Systems to discover that the wireless signals surrounding oneself can be used to detect motion. Known in the wireless industry as WiFi sensing, this technology brings many benefits that other motion detection solutions have not been able to provide. The working of WiFi sensing At Cognitive Systems, the company has used WiFi sensing technology to develop a motion detection solution called WiFi Motion™, which measures and interprets disruptions in RF signals transmitted between WiFi devices. When movement occurs in a space, ripples in the wireless signals are created. WiFi Motion interprets these ripples and determines if an action, such as sending a notification, is needed. Enabling this functionality in a space is incredibly simple. With a software upgrade to only one’s WiFi access point (or mesh router), motion sensing capabilities are layered into one’s WiFi network. Existing connected WiFi devices then become motion detectors without detracting from their original functions or slowing down the network. Using artificial intelligence (AI), WiFi Motion establishes a benchmark of the motionless environment and learns movement patterns over time, which could be used to predict trends. This allows unusual movement patterns to be detected with greater accuracy while decreasing the potential for costly false alerts. WiFi Motion requires no line-of-sight or installation WiFi sensing and other home monitoring solutions All of these capabilities are made possible by WiFi sensing and together create a motion detection system that provides unparalleled accuracy, coverage, privacy and affordability compared to other solutions on the market. PIR integration is far more complex and imposes electronic and physical design restrictions compared to WiFi sensing. In terms of placement, PIR systems are difficult to install, requiring line-of-sight and a device in every room for localisation. WiFi Motion requires no line-of-sight or installation and is also a scalable solution compared to PIR. Much like cameras, PIRs can only cover so much space, but WiFi Motion can cover the entire home and even detect motion in the dark and through walls, without adding additional devices to the home. WiFi Motion detects less distinguishing context than cameras and microphones, but more context than regular PIR sensors for the perfect balance of privacy and highly accurate motion detection. Privacy solution While cameras have been the security solution for years, WiFi Motion offers a more affordable solution that can rival the privacy and coverage capabilities of even the most high-end cameras. With such a wide coverage area, one might think that WiFi sensing infringes on privacy, but actually, the opposite is true. With WiFi Motion, the contextual information collected cannot be used to identify a specific individual, unlike cameras which can clearly identify a person’s face or microphones, which can identify a person’s voice. It is different from other smart home security options that use cameras and microphones because it only senses motion using WiFi signals - it doesn’t “see” or “listen” like a camera or microphone would. This provides opportunities for added security in spaces where privacy might be a concern and installing a camera may not be a comfortable solution, such as bathrooms and bedrooms. The data collected is also anonymised and highly encrypted according to stringent industry privacy standards. Existing connected WiFi devices then become motion detectors Additional WiFi sensing applications Since WiFi sensing technology requires no additional hardware or subscription fees, it is much more affordable than other motion detection solutions. It can be used as a standalone solution, or it can be easily layered into more complex systems. This ease of integration, scalability and relatively low cost brings a lot of potential for various applications. Motion detection can trigger other smart devices in the network to turn lights on or off In eldercare, for example, WiFi sensing can be used to help seniors live comfortably in their homes for as long as possible. With the increasing aging population and high costs associated with care homes, the market for this application is considerable. Caregivers can use an app to monitor movement in their loved one’s home and be alerted about unusual movement patterns that could indicate a concern. For smart homes and other environments that have a network of smart devices, the artificial intelligence (AI) component of the technology allows for improvements to automated features. Motion detection can trigger other smart devices in the network to turn lights on or off or make adjustments to the temperature in a room. Security for the commercial sector For office buildings and other commercial properties, it is easy to see how all of these features could be scaled up to offer a highly accurate and cost-effective motion sensing and smart device automation solution. Cognitive Systems is closely involved with the development of WiFi sensing technology, working with various industry groups to establish standards and help it reach its full potential. WiFi Motion is merely the tip of the iceberg in terms of motion sensing possibilities, but its applications in the world of security are undeniably compelling. It is an exciting time for the wireless industry, as one works with stakeholders in the security space to explore everything this technology can do.

The ins and outs of a successful security partnership
The ins and outs of a successful security partnership

The only constant theme for video technology is its constant evolution. Over the last 40 years, cameras have gone from limited view, constantly monitored rarities to being one of the most populous Internet of Things (IoT) devices with a global reach. Fixed cameras with limited fields of view have been augmented with panoramic cameras with 180- and 360-degree viewing capabilities at ultra-high resolutions in the 4K and 8K ranges, a far cry from the grainy, monochrome viewing of the past. Threats have also evolved in that time, leading to a necessary evolution in security posture, moving from a series of individual programmes and practices, to a comprehensive strategy designed around complex risk assessments. To ensure the successful implementation of your security stance in today’s world, you need technology to integrate seamlessly and vendors to work together to deliver coherent solutions rather than individual components. Since successful partnerships are always a two-way street, it’s important to take a look at some of the factors that vendors should offer and expect to receive when entering a beneficial partnership where technology seamlessly folds into the ecosystem of the partner’s technology offerings. Open technology standards If you ask any customer what the biggest negative is when it comes to new and emerging technologies, you’ll get a pretty rapid answer of “vendor lock-in.” You can have the best technology in the world, but if you don’t give a customer the opportunity to build multiple, “best-of-breed” products into a comprehensive strategy, you’re going to fall by the wayside pretty quickly. You need technology to integrate seamlessly and vendors to work together That’s not to say that you can’t have unique, proprietary or visionary technology; you absolutely can, and it is what innovation and progress thrives on. Building those technologies around open technology standards is vital if you are looking for wide-scale adoption. Using open technology standards also allows you to integrate with established industry players faster, more smoothly and with increased benefits to the customer. All of this leads to a faster time to revenue and a more rapid scaling of your presence in the market. Direct technology integrations Continuing the theme of open technology standards improving the ability to drive relationships with existing, complimentary technology partners, the directness and depth of integration also bears consideration. Using open technology standards also allows you to integrate with established industry players faster, more smoothly and with increased benefits to the customer One of the blights of building a security practice is getting all of your technologies to integrate together and feed information to each other. When you add the fact that each technology has its own user interface (UI) and management console, it can very quickly become overwhelming for the end user to keep tabs on each console, learn every interface and complicates building a workflow in the case of incidents or investigations. The administrators who manage the system also have to update each component individually, ensure that the integrations don’t break when an update is delivered and ensure that any new technologies don’t cause an existing piece of your solution to fail. As a technology vendor, if you have used open technology standards, and written your software with integrations in mind, you will find yourself becoming an easy solution to turn to. Camera manufacturers in particular can take advantage of this when integrating with a video management system (VMS). The deeper you integrate, and the easier you make it to manage, update, monitor and interact with your cameras for the VMS and subsequently the operator using the VMS, the more likely your technology will be designed into solutions. Open communication and equal joint development Successful partnerships are all about communication, and in my experience, having organisational alignment throughout both companies does wonders to improve the development processes. Executive support in particular is key, and a mutual understanding between leaders makes for a more successful go to market strategy. Equally as important is joint development, especially for engineering teams. Often, software engineers are just thrown the software from the larger of the two partners and told “make sure we integrate with this.”  It is then down to the engineering teams to figure out how the partner software works and figure out their integrations. This is less difficult if the partner is using open standards, but there is still a high degree of difficulty involved. It also takes longer to create, test, adjust and release software integrations in this way. Then you have to repeat the process whenever there is a software update on either side. Successful partnerships are all about communication If you work collaboratively as engineering teams with defined co-development plans and processes, this process is simplified, and a better solution is realised for the customer. Working as equals also allows you to drive technology advancement faster, especially for the longer established vendor. New technology companies are forced to innovate faster to stay alive and that is well worth remembering. Your mutual sales teams also have a large part to play here, since working together in front of customers with a connected message will deliver better feedback into the engineering teams for future developments and projects. If you build your technology partnerships on these foundations, then you are well positioned to deliver great solutions to your customers, real value when it comes to forming a major part of the wider security ecosystem and will be well on your way to becoming a mainstay in the physical security world.