Sustainability is one of the current megatrends. Unsurprisingly, as climate change affects everyone. And, just as everybody is part of the problem to various degrees, everyone can also be part of the solution.
Indeed, increasing customer awareness is driving change, as is pressure from non-governmental organisations (NGOs) and industry-sponsored initiatives that advocate stricter guidelines for manufacturers.
The UN Sustainability Development Goals (SDGs) also plays an immeasurable part. Many organisations support SDGs by taking responsibility and acting more proactively, in order to make their business more sustainable.
Selecting sustainable materials is important
Selecting sustainable materials is one of the focus areas of green design"
“Selecting sustainable materials is one of the focus areas of green design,” said Ausra Reinap, Senior Environmental Engineer at Axis Communications, adding “We’re striving to use more recycled materials and aim to minimise and eventually, avoid the use of hazardous substances in our products. With the development of cameras that are free of hazardous brominated and chlorinates flame retardants, without compromising fire safety, we have taken the first step towards this goal.”
Ausra Reinap is a member of the Axis Green Design Group, which was formed back in 2012, with the aim to support the company’s move to more eco-friendly products. Bringing together different competencies from design, environment and quality, the group aims to increase environmental awareness and to motivate Axis’ mechanical designers during the development process.
Axis has identified four eco-innovation aspects:
- Material selection
- Optimise part design
- Optimise design for manufacturing
- Optimise disposal
Covering the entire product lifecycle
“Green Design is a rather wide concept that focuses on how we can minimise our environmental impact,” said Ausra, adding “not only throughout the value chain, but throughout the entire product lifecycle.”
In 2015, Axis launched its Green Design Evaluation Scorecard to help designers integrate environmental considerations into the product development process. Ausra Reinap said, “We know that selecting recycled materials can be a challenge, especially ones that comply with the strict UL standards, which are crucial in the USA and Canada.”
Axis list of banned and restricted substances
Axis has a list of banned and restricted substances, including substances that are already regulated by law
Axis has a list of banned and restricted substances, including both substances that are already regulated by law and substances that aren’t restricted or banned yet, but will likely be so in the future.
“The list includes plasticisers, as well as brominated and chlorinated flame retardants or BFRs and CFRs as we call it, and it’s very important to us to not just wait for legislation, but rather be one step ahead,” Ausra explains.
Weight is essential to optimise part design. Less material means using less resource, but also reduced environmental impact from transports. Another way to optimise the part design is to reduce the number of screws or even design without screws altogether, for instance, by using snap joints instead.
Optimising design for manufacturing
Equally important is how the product is produced. Optimising design for manufacturing means specifying the appropriate surface finishing and tolerances, which will minimise waste. Ausra points out that this can be a balancing act.
Ausra Reinap said, “We want to optimise our processes, but without jeopardising the quality. This claim to ourselves made it somehow challenging because the BFR/CFR-free materials tend to be more rigid, but we found a way to solve it while being sustainable.”
Looking beyond the product usage phase, it is essential to design for optimal disposal. Making disassembly easier will simplify repair, reuse and recycling. “Optimally,” said Ausra, adding “We’d have a modular design that would enable a circular approach. We’re running and evaluating some initiatives, so this is something that we’re looking into.”
BFR/CFR-free product development
Senior engineer at Axis Communications, Christian Adielsson has hands-on experience of green design in a new product development project. He said, “We were starting a camera project based on a totally new platform and one requirement was that everything should be free from brominated and chlorinated flame retardants.”
The first product we launched, that had still three components in it, that weren’t BFR/CFR-free, was AXIS P1375"
“We started contacting suppliers in search of substitutes,” said Christian Adielsson, adding “Our first approach to tackle this problem ended up being quite time-consuming, as we didn’t have the proper tools to automate the process.”
He adds, “Thus, we had to go through everything manually. The first product we launched, that had still three components in it, that weren’t BFR/CFR-free, was AXIS P1375. But we knew this was only the first step.”
AXIS P1375 Network Camera
About two years after starting the development of AXIS P1375 Network Camera, the team found a way to make the camera environmental friendly, by eliminating brominated and chlorinated flame retardants in all the components. But thanks to the usage of metal oxides, the devices are still flame resistant.
Christian Adielsson said, “It’s great to see that our BFR and CFR-free camera is a pioneer product for the network camera industry. It ensures safety and security while contributing to a greener environment.”
Taking responsibility for sustainability
Ausra Reinap concludes by stating, “As a manufacturer today, it’s crucial that you take responsibility for sustainability, and green design is necessary to be a credible supplier. Axis has very high ambitions and if our ambition is to be the industry leader, we must reduce our environmental impact throughout the entire product life cycle.”