March Networks Network Video Recorders (NVR) / Network DVRs(11)
March Networks’ new 8724 V Tribrid NVR delivers support for high-definition (HD) analogue video in addition to IP and standard analogue video channels on a single, integrated platform. The recorder provides organisations with the custom combination of video capture they need right out of the box. It enables them to get sharp HD video using existing analogue infrastructure, while avoiding the cost and disruption typically required to replace coaxial cable with Ethernet. Available in an innovative, space-saving wall mount, and delivering all the reliability and serviceability customers have come to expect from March Networks, the 8724 V Tribrid NVR makes it easy for retailers, financial institutions, school districts and other organisations to transition to an intelligent, HD video solution affordably and at their own pace. The NVR’s unique design uses analogue power and Power over Ethernet (PoE) modules to support a variety of IP and HD analogue video configurations, up to a maximum of 24 channels. For example, an organisation could deploy an 8724 V to capture HD video from eight HD analogue and 16 IP cameras at one location, and eight IP and 8 HD analogue cameras with another 8724 V at a second site. All camera licensing is included regardless of the configuration, making the recorder even more cost-effective. To ensure reliability, the 8724 V incorporates a customised embedded Linux OS that eliminates unnecessary background services and frequent system updates. Other reliability features include diagnostic LEDs, an internal battery backup, and real-time system health monitoring via March Networks Command™ video management software. The recorder is also simple to maintain, thanks to unique QR codes that work with March Networks’ free GURU Smartphone App to enable instant configuration audits, troubleshooting, warranty checks and other capabilities using a smartphone or tablet. In addition, the NVR’s modular configuration and convenient form factor also make it an ideal recording engine for the quick service and fast casual markets as part of March Networks’ cloud-based Searchlight for QSR service.Add to Compare
Real Time / Timelapse / Event, 64, Software solution, Inbuilt multiplexer, HDD, 64 TB, USB, Multiple NVR support, Removable HDD, Linux, 115 ~ 230 V AC, 85 ~ 210 W, 11.6, 88.6 x 482 x 534, 0 ~ 40 C (32 ~ 104 F), 5 ~ 95Add to Compare
Real Time / Timelapse / Event, 48, Software solution, Inbuilt multiplexer, HDD, 64 TB, USB, Video motion detection, Expandable to multi NVRs, Removable HDD, Linux, 115 ~ 230 V AC, 85 ~ 210 W, 11.6, 88.6 x 482 x 534, 0 ~ 40 C (32 ~ 104 F), 5 ~ 95Add to Compare
Real Time / Timelapse / Event, 4 ~ 6, Software solution, Inbuilt multiplexer, 3.84 TB, USB, 30 fps, 2 in, 1 out, Video motion detection, Removable HDD, 9 ~ 36 V DC, 3, 87 x 263 x 265, -25 ~ +55 C ( -13 ~ +131 F)Add to Compare
Browse Network Video Recorders (NVR) / Network DVRs
Network Video Recorder (NVR) products updated recently
In 2017, IoT-based cyberattacks increased by 600%. As the industry moves towards the mass adoption of interconnected physical security devices, end users have found a plethora of advantages, broadening the scope of traditional video surveillance solutions beyond simple safety measures. Thanks in part to these recent advancements, our physical solutions are at a higher risk than ever before. With today’s ever evolving digital landscape and the increasing complexity of physical and cyber-attacks, it’s imperative to take specific precautions to combat these threats. Video surveillance systems Cybersecurity is not usually the first concern to come to mind When you think of a video surveillance system, cybersecurity is not usually the first concern to come to mind, since digital threats are usually thought of as separate from physical security. Unfortunately, these two are becoming increasingly intertwined as intruders continue to use inventive methods in order to access an organisation's assets. Hacks and data breaches are among the top cyber concerns, but many overlook the fact that weak cybersecurity practices can lead to physical danger as well. Organisations that deploy video surveillance devices paired with advanced analytics programs often leave themselves vulnerable to a breach without even realising it. While they may be intelligent, IoT devices are soft targets that cybercriminals and hackers can easily exploit, crippling a physical security system from the inside out. Physical security manufacturers Whether looking to simply gain access to internal data, or paralyse a system prior to a physical attack, allowing hackers easy access to surveillance systems can only end poorly. In order to stay competitive, manufacturers within the security industry are trading in their traditional analogue technology and moving towards interconnected devices. Due to this, security can no longer be solely focused on the physical elements and end users have taken note. The first step towards more secured solutions starts with physical security manufacturers choosing to make cybersecurity a priority for all products, from endpoint to edge and beyond. Gone are the days of end users underestimating the importance of reliability within their solutions. Manufacturers that choose to invest time and research into the development of cyber-hardening will be ahead of the curve and an asset to all. Wireless communication systems Integrators also become complicit in any issues that may arise in the future Aside from simply making the commitment to improve cyber hygiene, there are solid steps that manufacturers can take. One simple action is incorporating tools and features into devices that allow end users to more easily configure their cyber protection settings. Similarly, working with a third party to perform penetration testing on products can help to ensure the backend security of IoT devices. This gives customers peace of mind and manufacturers a competitive edge. While deficient cybersecurity standards can reflect poorly on manufacturers by installing vulnerable devices on a network, integrators also become complicit in any issues that may arise in the future. Just last year, ADT was forced to settle a $16 million class action lawsuit when the company installed an unencrypted wireless communication system that rendered an organisation open to hacks. Cybersecurity services In addition, we’ve all heard of the bans, taxes and tariffs the U.S. government has recently put on certain manufacturers, depending on their country of origin and cybersecurity practices. Lawsuits aside, employing proper cybersecurity standards can give integrators a competitive advantage. With the proliferation of hacks, malware, and ransomware, integrators that can ease their client's cyber-woes are already a step ahead. By choosing to work with cybersecurity-focused manufacturers who provide clients with vulnerability testing and educate end users on best practices, integrators can not only thrive but find new sources of RMR. Education, collaboration and participation are three pillars when tackling cybersecurity from all angles. For dealers and integrators who have yet to add cybersecurity services to their business portfolios, scouting out a strategic IT partner could be the answer. Unlocking countless opportunities Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step Physical security integrators who feel uncomfortable diving headfirst into the digital realm may find that strategically aligning themselves with an IT or cyber firm will unlock countless opportunities. By opening the door to a partnership with an IT-focused firm, integrators receive the benefit of cybersecurity insight on future projects and a new source of RMR through continued consulting with current customers. In exchange, the IT firm gains a new source of clients in an industry otherwise untapped. This is a win for all those involved. While manufacturers, dealers and integrators play a large part in the cybersecurity of physical systems, end users also play a crucial role. Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step. Commonplace cybersecurity standards Below is a list of commonplace cybersecurity standards that all organisations should work to implement for the protection of their own video surveillance solutions: Always keep camera firmware up to date for the latest cyber protections. Change default passwords, especially those of admins, to keep the system locked to outside users. Create different user groups with separate rights to ensure all users have only the permissions they need. Set an encryption key for surveillance recordings to safeguard footage against intruders and prevent hackers from accessing a system through a backdoor. Enable notifications, whether for error codes or storage failures, to keep up to date with all systems happenings. Create/configure an OpenVPN connection for secured remote access. Check the web server log on a regular basis to see who is accessing the system. Ensure that web crawling is forbidden to prevent images or data found on your device from being made searchable. Avoid exposing devices to the internet unless strictly necessary to reduce the risk of attacks.
When a child goes missing in a large, crowded mall, we have a panicking mom asking for help from the staff, at least a dozen cameras in the area, and assuming the child has gone missing for only 15 minutes, about 3 hours’ worth of video to look through to find the child. Typical security staff response would be to monitor the video wall while reviewing the footage and making a verbal announcement throughout the mall so the staff can keep an eye out for her. There is no telling how long it will take, while every second feels like hours under pressure. As more time passes, the possible areas where the child can be will widen, it becomes more time-consuming to search manually, and the likelihood of finding the child decreases. What if we can avoid all of that and directly search for that particular girl in less than 1 second? Artificial neural networks are improving every day and now enable us to search for a person across all selected camera streamsWith Artificial Intelligence, we can. Artificial neural networks are improving every day and now enable us to search for a person across all selected camera streams in a fraction of a second, using only one photo of that person. The photo does not even have to be a full frontal, passport-type mugshot; it can be a selfie image of the person at a party, as long as the face is there, the AI can find her and match her face with the hundreds or thousands of faces in the locations of interest. The search result is obtained in nearly real time as she passes by a certain camera. Distinguishing humans from animals and statues The AI system continuously analyses video streams from the surveillance cameras in its network, distinguishes human faces from non-human objects such as statues and animals, and much like a human brain, stores information about those faces in its memory, a mental image of the facial features so to speak. When we, the system user, upload an image of the person of interest to the AI system, the AI detects the face(s) in that image along with their particular features, search its memory for similar faces, and shows us where and when the person has appeared. We are in control of selecting the time period (up to days) and place (cameras) to search, and we can adjust the similarity level, i.e., how much a face matches the uploaded photo, to expand or fine-tune the search result according to our need. Furthermore, because the camera names and time stamps are available, the system can be linked with maps to track and predict the path of the person of interest. AI Face Search is not Face Recognition for two reasons: it protects people’s privacy, and it is lightweight Protecting people’s privacy with AI Face Search All features of face recognition can be enabled by the system user, such as to notify staff members when a person of interest is approaching the store AI Face Search is not Face Recognition for two reasons: it protects people’s privacy, and it is lightweight. First, with AI Face Search, no names, ID, personal information, or lists of any type are required to be saved in the system. The uploaded image can be erased from the system after use, there is no face database, and all faces in the camera live view can be blurred out post-processing to guarantee GDPR compliance. Second, the lack of a required face database, a live view with frames drawn around the detected faces and constant face matching in the background also significantly reduces the amount of computing resource to process the video stream, hence the lightweight. Face Search versus Face Recognition AI Face Search Face Recognition Quick search for a particular person in video footage Identify everyone in video footage Match detected face(s) in video stream to target face(s) in an uploaded image Match detected face(s) in video stream to a database Do not store faces and names in a database Must have a database with ID info Automatically protect privacy for GDPR compliance in public places May require additional paperwork to comply with privacy regulations Lightweight solution Complex solution for large-scale deployment Main use: locate persons of interest in a large area Main use: identify a person who passes through a checkpoint Of course, all features of face recognition can be enabled by the system user if necessary, such as to notify staff members when a person of interest is approaching the store, but the flexibility to not have such features and to use the search tool as a simple Google-like device particularly for people and images is the advantage of AI Face Search.Because Face Search is not based on face recognition, no faces and name identifications are stored Advantages of AI Face Search Artificial Intelligence has advanced so far in the past few years that its facial understanding capability is equivalent to that of a human. The AI will recognise the person of interest whether he has glasses, wears a hat, is drinking water, or is at an angle away from the camera. In summary, the advantages of Face Search: High efficiency: a target person can be located within a few seconds, which enables fast response time. High performance: high accuracy in a large database and stable performance, much like Google search for text-based queries. Easy setup and usage: AI appliance with the built-in face search engine can be customised to integrate to any existing NVR/VMS/camera system or as a standalone unit depending on the customer’s needs. The simple-to-use interface requires minimal training and no special programming skills. High-cost saving: the time saving and ease of use translate to orders of magnitude less manual effort than traditionally required, which means money saving. Scalability: AI can scale much faster and at a wider scope than human effort. AI performance simply relies on computing resource, and each Face Search appliance typically comes with the optimal hardware for any system size depending on the customer need, which can go up to thousands of cameras. Privacy: AI Face Search is not face recognition. For face recognition, there are privacy laws that limits the usage. Because Face Search is not based on face recognition, no faces and name identifications are stored, so Face Search can be used in many public environments to identify faces against past and real-time video recordings. AI Face Search match detected face(s) in video stream to target face(s) in an uploaded image Common use cases of AI Face Search In addition to the scenario of missing child in a shopping mall, other common use cases for the AI Face Search technology include: Retail management: Search, detect and locate VIP guests in hotels, shopping centres, resorts, etc. to promptly attend to their needs, track their behaviour pattern, and predict locations that they tend to visit. Crime suspect: Quickly search for and prove/disprove the presence of suspects (thief, robber, terrorist, etc.) in an incident at certain locations and time. School campus protection: With the recent increase in number of mass shootings in school campuses, there is a need to identify, locate and stop a weapon carrier on campus as soon as possible before he can start shooting. Face Search will enable the authorities to locate the suspect and trace his movements within seconds using multiple camera feeds from different areas on campus. Only one clear image of the suspect’s face is sufficient. In the race of technology development in response to business needs and security concerns, AI Face Search is a simple, lightweight solution for airports, shopping centres, schools, resorts, etc. to increase our efficiency, minimise manual effort in searching for people when incidents occur on site, and actively prevent potential incidents from occurring. By Paul Sun, CEO of IronYun, and Mai Truong, Marketing Manager of IronYun
With increased demands being placed on safety and security globally, and supported by advancements in IP cameras and 360-degree camera technology, the video surveillance industry is growing steadily. Market research indicates that this worldwide industry is expected to reach an estimated $39.3 billion in revenue by 2023, driven by a CAGR of 9.3 percent from 2018 to 2023. Video surveillance is not just about capturing footage (to review an event or incident when it occurs), but also about data analysis delivering actionable insights that can improve operational efficiencies, better understand customer buying behaviours, or simply just provide added value and intelligence. Growth of Ultra-HD surveillance To ensure that the quality of the data is good enough to extract the details required to drive these insights, surveillance cameras are technologically evolving as well, not only with expanded capabilities surrounding optical zoom and motion range,4K Ultra HD-compliant networked cameras are expected to grow from 0.4 percent shipped in 2017, to 28 percent in 2021 but also relating to improvements in signal-to-noise (S2N) ratios, light sensitivities (and the minimum illumination needed to produce usable images), wide dynamic ranges (WDR) for varying foreground and background illumination requirements, and of course, higher quality resolutions. As such, 4K Ultra HD-compliant networked cameras are expected to grow from 0.4 percent shipped in 2017, to 28 percent in 2021, representing an astonishing 170 percent growth per year, and will require three to six times the storage space of 1080p video dependent on the compression technology used. Surveillance cameras are typically connected to a networked video recorder (NVR) that acts as a gateway or local server, collecting data from the cameras and running video management software (VMS), as well as analytics. Capturing this data is dependent on the communications path between individual cameras and the NVR. If this connection is lost, whether intentional, unintentional, or a simple malfunction, surveillance video will no longer be captured and the system will cease operations. Therefore, it has become common to use microSD cards in surveillance cameras as a failsafe mechanism. Despite lost connectivity to the NVR, the camera can still record and capture raw footage locally until the network is restored, which in itself, could take a long time depending on maintenance staff or equipment availability, weather conditions, or other unplanned issues. Since microSD cards play a critical role as a failsafe mechanism to ensure service availability, it is important to choose the right card for capturing video footage. It has become common to use microSD cards in surveillance cameras as a failsafe mechanism if an NVR breaks Key characteristics of microSDs There are many different microSD cards to choose from for video capture at the network’s edge, and they range from industrial grade capabilities to commercial or retail grade, and everything in-between. To help make some of these uncertainties a little more certain, here are the key microSD card characteristics for video camera capture. Designed for surveillance As the market enjoys steady growth, storage vendors want to participate and have done so with a number of repurposed, repackaged, remarketed microSD cards targeted for video surveillance but with not much robustness, performance or capabilities specific to the application. Adding the absence of mean-time between failure (MTBF) specifications to the equation, microSD card reliability is typically a perceived measurement -- measured in hours of operation and relatively vague and hidden under metrics associated with the camera’s resolution and compression ratio. Therefore, when selecting a microSD card for surveillance cams at the edge, the choice should include a vendor that is trusted, has experience and a proven storage portfolio in video surveillance, and in microSD card technologies. Endurance, as it relates to microSD cards, represents the number of rewrites possible before the card can no longer store data correctly High endurance Endurance, as it relates to microSD cards, represents the number of rewrites (program/erase cycles) that are possible before the card can no longer store data correctly. The rewrite operation is cyclical whereby a new stream of footage replaces older content by writing over it until the card is full, and the cycle repeats. The higher the endurance, the longer the card will perform before it needs to be replaced. Endurance is also referred to in terabytes written (TBW) or by the number of hours that the card can record continuously (while overwriting data) before a failure will occur. Health monitoring Health monitoring is a desired capability that not many microSD cards currently support and enables the host system to check when the endurance levels of a card are low and needs to be replaced. Having a card that supports this capability enables system integrators and operators with the ability to perform preemptive maintenance that will help to reduce system failures, as well as associated maintenance costs. Performance To capture continuous streams of raw footage, microSD cards within surveillance cams perform write operations about seventy to ninety percent of the time, whereas reading captured footage is performed about ten to thirty percent. The difference in read/write performance is dependent on whether the card is used in an artificial intelligent (AI) capable camera, or a standard one. microSD cards deployed within surveillance cameras should support temperature ranges from -25 degrees Celsius to 85 degrees Celsius Finding a card that is write-friendly, and can provide enough bandwidth to properly capture streamed data, and is cost-effective, requires one that falls between fast industrial card capabilities and slower commercial ones. Bandwidth in the range of 50 MB/sec for writes and 80 MB/sec for reads are typical and sufficient for microSD cards deployed within surveillance cameras. Temperature ranges Lower capacity support of 32GB can provide room to attract the smaller or entry-level video surveillance deployments As microSD cards must be designed for continuous operation in extreme weather conditions and a variety of climates, whether located indoors or out, support for various temperature ranges are another consideration. Given the wide spectrum of temperatures required by the camera makers, microSD cards deployed within surveillance cameras should support temperature ranges from -25 degrees Celsius to 85 degrees Celsius, or in extreme cases, as low as -40 degrees Celsius. Capacity Selecting the right-sized capacity is also very important as there needs to be a minimum level to ensure that there is enough room to hold footage for a number of days or weeks before it is overwritten or the connectivity to the NVR is restored. Though 64GB is considered the capacity sweet spot for microSD cards deployed within surveillance cameras today, lower capacity support of 32GB can provide room to attract the smaller or entry-level video surveillance deployments. In the future, even higher capacities will be important for specific use cases and will potentially become standard capacities as the market evolves. When choosing the right storage microSD card to implement into your video surveillance system, make sure the card is designed specifically for the application – does it include the right levels of endurance and performance to capture continuous streams – can it withstand environmental challenges and wide temperature extremes – will it enable preventative and preemptive maintenance to provide years of service? It is critical for the surveillance system to be able to collect video footage whether the camera is connected to an NVR or is a standalone camera as collecting footage at the base of the surveillance system is the most crucial point of failure. As such, failsafe mechanisms are required to keep the camera recording until the network is restored.
Two of the most important priorities in a manufacturing environment are safety and productivity. Failure to follow safe work practices around machinery on a factory floor can result in serious injury, while poor productivity can erode profits and ultimately threaten the viability of the business. At WCCO Belting, a Wahpeton, North Dakota-based manufacturer of custom rubber products for agriculture and light-industrial conveyor equipment, a March Networks® video surveillance solution plays a key role in enhancing both safety and productivity. Monitor work processes “Recently, for example, we had a minor safety incident on one of our machines that was captured by the system,” said Michael Marsh, Senior Technology Administrator. “The video not only allowed us to determine the cause of the incident, it also helped us create a proprietary piece of equipment to ensure that the accident would never happen again.” Safety was the main reason WCCO Belting acquired a March Networks system in 2015 Safety was the main reason WCCO Belting acquired a March Networks system in 2015, but the company soon discovered it could use the technology for other equally important priorities. “We found that we could use the video solution for time studies, to be more effective and efficient,” said Marsh. WCCO engineers use the video to monitor work processes and then tweak them to speed production, while ensuring optimum quality. Security system integrator The company selected Marco Technologies as its security system integrator in 2015, and acquired March Networks 8000 Series Hybrid NVRs shortly thereafter. Two years later, when WCCO Belting decided to also equip a second production facility in Arlington, Texas, it upgraded to a March Networks Command™ Recording Software (CRS) solution in North Dakota and moved the 8000 Series Hybrid NVRs to its Texas facility. At the same time, the company deployed March Networks Command Enterprise Software to tie all the video from its geographically-dispersed facilities together, said Marsh. The software enables WCCO Belting “to oversee everything and manage the entire system from a single point of entry.” In addition, approximately 50 March Networks IP cameras — including indoor domes with wide dynamic range and outdoor IR bullet cameras — provide crystal-clear video of activity on the company’s factory floors, loading docks and parking lots. Remote configuration Marsh cites ease of use and outstanding support as the main reasons for selecting the video solution. “The technology is easy to implement, easy to use and easy to navigate. Support has also been great. When we ran into some early issues, they responded quickly to help resolve the problem.” We didn’t have to uproot a lot of the architecture already in place" “More recently, when we decided to expand the system to include our second location, it was Marco that recommended the CRS solution and the redeployment of our NVRs to Texas. It was really plug and play. That was the winning piece for us. We didn’t have to uproot a lot of the architecture already in place.” A system that was easy to rollout was important because WCCO Belting’s IT department does the physical camera install themselves, while partnering with Marco Technologies for remote configuration. Command mobile app “It’s one of the reasons we like March Networks, because we’re a hands-on IT department,” explained Marsh. “We like to make sure we’re always on top of things and that we understand the equipment we’re working with. If we can’t install it ourselves and need someone to come in and do it for us, it just creates future costs.” Aside from the IT department, which has administrative access to the system, authorised supervisors and managers at WCCO Belting are able to audit video for safety and security purposes. Temporary access is also provided to engineering staff for time studies. Marsh and several supervisors also have access to video through the Command Mobile app on their smartphones. Available as a free download from the Apple Store and Google Play, Command Mobile runs on iPhones, iPads and Android devices. Track offending vehicle Remote, after-hours access to video proved valuable during the previously mentioned safety incident, for example, “by allowing managers to pull up video from home and use it to make decisions quickly,” said Marsh. The video solution has also proven useful to local law enforcement, as some of the bullet cameras covering the employee parking lot at the North Dakota facility also have a clear view of North 9th St., a busy artery in the town of 8,000. The video resolution was so good that we were able to quickly track the offending vehicle" “One day, I was called to the front desk and met by two police officers and three sheriffs,” recalled Marsh. “They wanted to come to my office but didn’t say why. I was never so nervous in my life. Once in my office, they explained that they wanted to see if we had any recorded video to help them solve a hit and run a block and a half down the road. We did, and the video resolution was so good that we were able to quickly track the offending vehicle.” Rubber belting solutions “We’ve had two law enforcement visits since then, so now when they show up, I know I’m not in trouble,” joked Marsh. A family-owned business, WCCO Belting was founded in 1954 by Ed Shorma, a Korean War veteran who mortgaged the family car and borrowed $1,500 to buy a shoe repair shop. Propelled by Shorma’s strong work ethic and talent for ingenuity, the business grew and evolved as a manufacturer of rubber belting solutions, leading to Shorma’s recognition as Small Business Person of the Year by U.S. President Ronald Reagan in 1982. WCCO Belting is currently led by president and CEO, Tom Shorma, Ed’s son, and has 270 employees — 200 in North Dakota and 70 in Texas. The company’s rubber product solutions are sought after worldwide, and exported to customers in more than 20 countries. The company won North Dakota’s Exporter of the Year award in 2003, and in 2010 and 2016 it was the recipient of the Presidential ‘E’ Award and ‘E-Star’ award for its export promotion efforts.
March Networks, a global video security and video-based business intelligence pioneer, is proud to announce that it has been designated as a cybersecure business by Cyber Essentials Canada for a second consecutive year. March Networks was the first company in the country to achieve the certification in 2018, and is the first to re-certify through the program this year. Developed as part of the United Kingdom’s (U.K.’s) National Cyber Security Programme, Cyber Essentials certification is awarded to organisations able to demonstrate good cybersecurity practices and an ability to mitigate risks from Internet-based threats in areas including: boundary firewalls and Internet gateways; network configuration; software management; access control; and malware protection. The toolset is also a valuable asset for end user organisations seeking to verify the security of their supply chain. Adhering to best security practices Our participation in the Cyber Essentials program enables us to confirm that we are adhering to the current security practices"“March Networks works with many Fortune 500 customers, including some of the world’s largest banks, so strong corporate security practices have always been a priority,” said Peter Strom, President and CEO, March Networks. “Our participation in the Cyber Essentials program enables us to confirm that we are adhering to the most current security best practices. It also provides our customers with yet another assurance of our high cybersecurity standards.” March Networks’ holistic approach to security involves a 360° view of all areas of its business – from product development and source code management, to operational processes and customer data privacy. The company’s Network Operations Center, for example, operates with extensive physical access and networking controls and restrictions to ensure the security of customer data. The company also participates in comprehensive security audits initiated by large enterprise customers seeking to confirm the security of their video solution provider. Identifying potential vulnerabilities Proactive resilience strategies help strengthen organisations’ ability to avoid disruption"In addition, March Networks takes a proactive approach to identifying potential vulnerabilities in its products. The company’s Security Updates and Advisories program involves regularly tracking US-CERT reports on identified vulnerabilities, conducting in-depth investigations when required, and alerting customers and partners to any necessary software updates via email alerts and information posted directly on the March Networks website. Endorsed by the U.K. government, Cyber Essentials was originally created in collaboration with industry partners such as the Information Security Forum (ISF) and the British Standards Institution (BSI). CyberNB, a special operating agency of Opportunities New Brunswick, administers the program in Canada, where it is gaining momentum as a requirement to win business in both public and private sectors. “The team at CyberNB is proud of the commitment to security and continuous improvement that we’ve seen from March Networks,” said Josh Waite, Head of Cyber Essentials Canada. “Proactive resilience strategies help strengthen organisations’ ability to avoid disruption and demonstrate responsible practice. We congratulate March Networks for having made Cyber Essentials Canada certification part of their strategy.”
Brian Ishikawa has always kept tight control over his video surveillance system, allowing only authorised personnel within his corporate security division to access video footage. So it was a change for Ishikawa, Senior Vice President and Director of Corporate Security for the Bank of Hawaii, to get used to the idea of authorised staff from the bank’s branch division being able to review video for operational, compliance and marketing-related purposes. The insights collected from the video are helping the bank make more strategic decisions about staffing, customer service and even future branch design. Business intelligence Our March Networks surveillance platform is providing us with some significant business and non-security-related uses" “Our March Networks surveillance platform is providing us with some significant business and non-security-related uses,” Ishikawa explained. Bank of Hawaii, which operates 69 branches and 373 ATMs across Hawaii, American Samoa and the West Pacific, is currently using March Networks Searchlight for Banking software to gather business intelligence at its branches. Searchlight’s mix of surveillance video, teller/ATM transaction data and analytics delivers valuable insights into the bank’s operations, as well as helping to enhance security and uncover fraud. “Our branch division folks look at the data to get ideas on how we should do our branch operations or staffing differently,” he said. People counting data — collected by FLIR Brickstream3D sensors integrated with the Searchlight software — tells them which entrances and exits are most used so they can place marketing materials in high-traffic areas. Video surveillance products The information is also being used to help determine future branch layouts. Queue length and dwell time data, meanwhile, help them understand their busiest time of day, and day of the week, so they can staff branches appropriately. “It’s a huge plus for us,” said Ishikawa. “Our executive management team can see the benefits of the video solution, and the future possibilities for this data.” A forward-thinking bank that’s keen to try new technology, Bank of Hawaii began exploring Searchlight after its success with March Networks’ other video surveillance products. The bank first started using March Networks systems in 2015, when it was time to upgrade its legacy DVRs. At the time, Bank of Hawaii was relying on two different video platforms, and it wasn’t happy with their performance. After enlisting the help of a consultant, and doing his own research at security tradeshows, Ishikawa says the decision to go with March Networks was clear. Network video recorders 'March Networks’ products are really engineered for the banking environment" “I remember asking some of my banking counterparts, ‘Hey what are you guys using?’ And they strongly recommended March Networks,” he recalled. The consultant came to a similar conclusion. He said, "March Networks’ products are really engineered for the banking environment,’ so that helped us make the decision.” Bank of Hawaii is currently using March Networks 8000 Series Hybrid Network Video Recorders (NVRs) in about half of its banking branches. The Linux-based devices provide reliable video surveillance recording and management, and are also easy to service, which is a huge bonus for Ishikawa and his team. In addition, the 8000 Series rack mount units feature an innovative ‘dock and lock’ station that allows technicians to easily remove and service the recorder while leaving all rear connections clean and organised in place. Existing analogue cameras “With other companies, you have to power down the recorder for several minutes to service it, and that means unplugging and re-plugging all the inputs. You miss a number of minutes of recording during that time. With March Networks, we’re able to just pull out the hard drive and pop in another one without taking the NVR offline,” he said. “That’s huge for us.” According to Ishikawa, Bank of Hawaii also appreciates the 8000 Series’ hybrid support, which allowed the bank to continue using its existing analogue cameras, and the motion histograms in March Networks Command video management software, which show Ishikawa and his team where motion occurred and helps them rapidly locate video evidence. “Command’s modern interface is really user-friendly, and it’s very easy to find video,” said Ishikawa. Dynamic range technology Bank of Hawaii has installed MegaPX ATM Cameras, which are purpose-built for ATMs “When someone is telling you, ‘Hey we had a problem at this branch this morning, I don’t know what happened, but it must have been around this time’, we’re able to find that video much more quickly on a March Networks platform.” The bank’s high resolution cameras also make it easy to discern important details. In its newer branches, Bank of Hawaii is using March Networks ME4 Series IP cameras, which capture 4MP images and feature high dynamic range technology to optimise image quality in both low and bright light. The bank is also using Oncam 360° cameras for high-resolution panoramic views. For security at its bank machines, Bank of Hawaii has installed MegaPX ATM Cameras, which are purpose-built for ATMs. Video is integrated with the bank’s ATM transaction data in the Searchlight software for rapid investigations into customer complaints and potential fraud. More comprehensive oversight “It’s so easy to search,” said Ishikawa. “It takes us exactly to that transaction and the associated video so we can figure out what transpired.” The bank is also integrating its teller transaction data with video in Searchlight for more comprehensive oversight of its branches. The combination of video, transactions and analytics helps it get a more holistic view of its services. “Transaction data is not always indicative of how busy a branch is,” Ishikawa said, noting that lengthier conversations at the teller counter often create value because the customer returns later to access another bank product or service. Having video and analytics is an added layer of information. Being able to remotely access video also helps Ishikawa’s security team conduct virtual patrols. This saves them both time and money. Uniformed security member Capturing video of the incident helped underscore the serious nature of the situation “In the past, whenever there was an issue, we had a uniformed security member head out and physically check the branch. But with virtual patrols, we can do fewer physical visits and, when we do visit, it’s a more meaningful visit.” The security team, for example, can keep an eye on issues with vagrancy and loitering by simply logging into the Command software. March Networks video has helped the bank successfully address some of these issues. In one case, a person was routinely visiting a branch and causing disruptions by yelling and throwing deposit slips on the floor. “We don’t always know the situation, but if a person is yelling or displaying erratic behaviour, they pose a risk,” said Ishikawa. Capturing video of the incident helped underscore the serious nature of the situation. Investigating a fraud “We were able to show police that this was not a minor disruptive party. It was a very concerning issue for us. And it wasn’t just our bank, it was occurring in other banks, too.” Going forward, Bank of Hawaii is planning to migrate its remaining retail branches to March Networks. Given the widespread benefits of intelligent video, Ishikawa predicts that, like him, more bank security managers will receive requests to share their video surveillance securely with other departments. “In the future, it won’t just be security that’s asking for a video upgrade,” he said. “It’s going to be other parts of the business saying, ‘We want a piece of the pie too.’ Because surveillance is more than just investigating a fraud or robbery incident. Now, video surveillance is a lot more than that.”
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
Five things to consider for AI with video technologyDownload
- Razberi Technologies' video surveillance appliances used to upgrade security at the City of Linden
- Hanwha Techwin unveils latest 4 and 8 channel Wisenet NVRs for train, bus and truck applications
- U.S. manufacturer uses March Networks video to boost safety and productivity
- Malaysian government selects Surveon NVR7800 Series for enhanced security of water treatment plant