Geutebruck Network Video Recorders (NVR) / Network DVRs(4)
Real Time, 16, Inbuilt multiplexer, Duplex, Playback, Recording, HDD, USB, 2560 x 1600, 1 x stereo (line out, jack, 3.5 mm), Windows 7, 110 ~ 240 V AC, 210 W, 18.5, 443 x 175 x 470, 0 ~ 35Add to Compare
Real Time / Timelapse, 16, Inbuilt multiplexer, Duplex, Playback, Recording, HDD, USB, 25/30 fps, 2048 x 1536, 1 x stereo (line out, jack, 3.5 mm), Windows 7, 110 ~ 240 V AC, 200 W, 11.6, 443 x 135 x 415, 0 ~ 35Add to Compare
The GeViStore-IP/16Bay-2P is Geutebruck’s latest redundant dual-processor storage server system for IP applications requiring high performance and high survivability. This is a complete solution designed to meet high end video security requirements in stand-alone and networked applications in environments such as airports, prisons, power plants, pharmaceutical companies and casinos. Built with the latest high quality server components, the GeViStore-IP is extremely powerful and failure resistant. It boasts two Xeon processors, a redundant power supply and integral hot-swap level 6 RAID for up to 16 HDDs and video databases of up to 32 TBytes. It records 800 images per second and streams 800 images per second simultaneously. It has virtual matrix functionality for IP cameras using all the common compression processes and formats, both standard CCD and megapixel. It supports state-of-the-art video content analysis and processes up to 1600 pictures per second for display on a separate display computer in full D1 resolution. — Performance which is achieved by running Geutebruck’s GeViScope video management system on the latest server hardware components under the 64Bit operating system Windows Server 2008 R2. Meanwhile its compact dimensions (3HU/19”rack) demonstrate the efficient use of hardware, space and energy which also keep operating costs small. The GeViStore-IP/16Bay-2P has a hardware monitoring function for easy diagnosis of any irregularities. And besides two 1GBit Ethernet ports, it also has a special administration network port which allows remote server management to BIOS level through a standard web browser. – Thus ensuring that problems can get immediate expert attention without travel costs and delays. A lockable front panel provides protection against unauthorised tampering.Add to Compare
October 2013 saw the launch of Geutebruck’s new net_porter, a pure IP, network-based NVR and a smart all-rounder suitable for almost any kind of application. The standard model comes with eight separate 1000Base-TX ports for IP camera connection and you can add a further switchboard to provide another eight ports if desired. With an integral high performance 180W PoE 1GBit switch for up to 16 IP cameras, you don’t need any external ancillary components such as camera PSUs, switches or midspan components. Installing and connecting cameras is extremely easy and each camera is automatically allocated its unique IP address using DHCP. The net_porter boasts Geutebruck’s Omnibrid technology which enables you to use different video compression formats within the same system (M-JPEG, H.264 [Multimedia], H264CCTV, MPEG4CCTV, MPEG4CCTV/MP). Other features include TCP/IP digital matrix functionality, port status indicators, centralised IP camera and switch configuration, and remote controlled voltage management with power consumption display for all PoE cameras. net_porter comes with a 2 TB database as standard but can accommodate up to four internal database disks.Add to Compare
Browse Network Video Recorders (NVR) / Network DVRs
Network Video Recorder (NVR) products updated recently
Securing Intelligent Transportation Systems (ITS) in the transportation industry is multi-faceted for a multitude of reasons. Pressures build for transit industry players to modernise their security systems, while also mitigating the vulnerabilities, risks, and growth-restrictions associated with proprietary as well as integrated solutions. There are the usual physical security obstacles when it comes to increasingly integrated solutions and retrofitting updated technologies into legacy systems. Starting with edge devices like cameras and intelligent sensors acquiring video, analytics and beyond, these edge devices are now found in almost all public transportation like buses, trains, subways, airplanes, cruise lines, and so much more. You can even find them in the world’s last manually operated cable car systems in San Francisco. The next layer to consider is the infrastructure and networks that support these edge devices and connect them to centralized monitoring stations or a VMS. Without this layer, all efforts at the edge or stations are in vain as you lose the connection between the two. And the final layer to consider when building a comprehensive transit solution is the software, recording devices, or viewing stations themselves that capture and report the video. The challenge of mobility However, the transportation industry in particular has a very unique challenge that many others do not – mobility. As other industries become more connected and integrated, they don’t usually have to consider going in and out or bouncing between networks as edge devices physically move. Obviously in the nature of transportation, this is key. Have you ever had a bad experience with your cellular, broadband or Wi-Fi at your home or office? You are not alone. The transportation industry in particular has a very unique challenge that many others do not – mobility Can you trust these same environments to record your surveillance video to the Cloud without losing any frames, non-stop 24 hours a day, 7 days a week, 365 days a year? To add to the complexity – how do you not only provide a reliable and secure solution when it’s mobile, travelling at varying speeds, and can be in/out of coverage using various wireless technologies? Waiting to upload video from a transport vehicle when it comes into port, the station, or any centralised location is a reactive approach that simply will not do any longer. Transit operations require a more proactive approach today and the ability to constantly know what is going on at any given time on their mobile vehicles, and escalate that information to headquarters, authorities, or law enforcement if needed; which can only occur with real-time monitoring. This is the ultimate question when it comes to collecting, analysing, and sharing data from mobile vehicles – how to get the video from public transportation vehicles alike to headquarters in real time! Managing video data In order to answer this question, let’s get back to basics. The management and nature of video data differs greatly from conventional (IT) data. Not only is video conducted of large frames, but there are specific and important relationships among the frames and the timing between them. This relationship can easily get lost in translation if not handled properly. This is why it’s critical to consider the proper way to transmit large frames while under unstable or variable networks. The Internet and its protocols were designed more than two decades ago and purposed for conventional data. Although the Internet itself has not changed, today’s network environments run a lot faster, expand to further ranges, and support a variety of different types of data. Because the internet is more reliable and affordable than in the past some might think it can handle anything. However, it is good for data, but not for video. This combination makes it the perfect time to convert video recording to the Cloud! Video transmission protocol One of the main issues with today’s technology is the degradation of video quality when transmitting video over the Internet. ITS are in dire need for reliable transmission of real-time video recording. To address this need a radical, yet proven, video transmission protocol has recently been introduced to the market. It uses AI technology and to adapt to different environments in order to always deliver high quality, complete video frames. This protocol, when equipped with encryption and authentication, enables video to be transmitted reliably and securely over the Internet in a cloud environment. One of the main issues with today’s technology is the degradation of video quality when transmitting video over the Internet Finally, transportation industry has a video recording Cloud solution that is designed for (massive) video that can handle networks that might be experiencing high error rate. Such a protocol will not only answer the current challenges of the transportation industry, but also make the previously risky Cloud environment safe for even the most reserved environments and entities. With revolutionary transmission protocols, the time is now to consider adopting private Cloud for your transportation operations.
The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorisation and the appropriate credentials. But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customised and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail Within the retail industry, autonomous, cashier-less stores are already growing in popularity The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms power continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.
In 2017, IoT-based cyberattacks increased by 600%. As the industry moves towards the mass adoption of interconnected physical security devices, end users have found a plethora of advantages, broadening the scope of traditional video surveillance solutions beyond simple safety measures. Thanks in part to these recent advancements, our physical solutions are at a higher risk than ever before. With today’s ever evolving digital landscape and the increasing complexity of physical and cyber-attacks, it’s imperative to take specific precautions to combat these threats. Video surveillance systems Cybersecurity is not usually the first concern to come to mind When you think of a video surveillance system, cybersecurity is not usually the first concern to come to mind, since digital threats are usually thought of as separate from physical security. Unfortunately, these two are becoming increasingly intertwined as intruders continue to use inventive methods in order to access an organisation's assets. Hacks and data breaches are among the top cyber concerns, but many overlook the fact that weak cybersecurity practices can lead to physical danger as well. Organisations that deploy video surveillance devices paired with advanced analytics programs often leave themselves vulnerable to a breach without even realising it. While they may be intelligent, IoT devices are soft targets that cybercriminals and hackers can easily exploit, crippling a physical security system from the inside out. Physical security manufacturers Whether looking to simply gain access to internal data, or paralyse a system prior to a physical attack, allowing hackers easy access to surveillance systems can only end poorly. In order to stay competitive, manufacturers within the security industry are trading in their traditional analogue technology and moving towards interconnected devices. Due to this, security can no longer be solely focused on the physical elements and end users have taken note. The first step towards more secured solutions starts with physical security manufacturers choosing to make cybersecurity a priority for all products, from endpoint to edge and beyond. Gone are the days of end users underestimating the importance of reliability within their solutions. Manufacturers that choose to invest time and research into the development of cyber-hardening will be ahead of the curve and an asset to all. Wireless communication systems Integrators also become complicit in any issues that may arise in the future Aside from simply making the commitment to improve cyber hygiene, there are solid steps that manufacturers can take. One simple action is incorporating tools and features into devices that allow end users to more easily configure their cyber protection settings. Similarly, working with a third party to perform penetration testing on products can help to ensure the backend security of IoT devices. This gives customers peace of mind and manufacturers a competitive edge. While deficient cybersecurity standards can reflect poorly on manufacturers by installing vulnerable devices on a network, integrators also become complicit in any issues that may arise in the future. Just last year, ADT was forced to settle a $16 million class action lawsuit when the company installed an unencrypted wireless communication system that rendered an organisation open to hacks. Cybersecurity services In addition, we’ve all heard of the bans, taxes and tariffs the U.S. government has recently put on certain manufacturers, depending on their country of origin and cybersecurity practices. Lawsuits aside, employing proper cybersecurity standards can give integrators a competitive advantage. With the proliferation of hacks, malware, and ransomware, integrators that can ease their client's cyber-woes are already a step ahead. By choosing to work with cybersecurity-focused manufacturers who provide clients with vulnerability testing and educate end users on best practices, integrators can not only thrive but find new sources of RMR. Education, collaboration and participation are three pillars when tackling cybersecurity from all angles. For dealers and integrators who have yet to add cybersecurity services to their business portfolios, scouting out a strategic IT partner could be the answer. Unlocking countless opportunities Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step Physical security integrators who feel uncomfortable diving headfirst into the digital realm may find that strategically aligning themselves with an IT or cyber firm will unlock countless opportunities. By opening the door to a partnership with an IT-focused firm, integrators receive the benefit of cybersecurity insight on future projects and a new source of RMR through continued consulting with current customers. In exchange, the IT firm gains a new source of clients in an industry otherwise untapped. This is a win for all those involved. While manufacturers, dealers and integrators play a large part in the cybersecurity of physical systems, end users also play a crucial role. Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step. Commonplace cybersecurity standards Below is a list of commonplace cybersecurity standards that all organisations should work to implement for the protection of their own video surveillance solutions: Always keep camera firmware up to date for the latest cyber protections. Change default passwords, especially those of admins, to keep the system locked to outside users. Create different user groups with separate rights to ensure all users have only the permissions they need. Set an encryption key for surveillance recordings to safeguard footage against intruders and prevent hackers from accessing a system through a backdoor. Enable notifications, whether for error codes or storage failures, to keep up to date with all systems happenings. Create/configure an OpenVPN connection for secured remote access. Check the web server log on a regular basis to see who is accessing the system. Ensure that web crawling is forbidden to prevent images or data found on your device from being made searchable. Avoid exposing devices to the internet unless strictly necessary to reduce the risk of attacks.
Security & Safety Things GmbH (S&ST), together with its partners, is offering packages of smart security cameras and video analytic solutions designed to provide retailers with immediate solutions to practical challenges from the COVID-19 pandemic. AI tech on cameras in retail stores In an effort to assist retailers operating their shops in compliance with COVID-19 regulations, these packages will include test cameras running the S&ST operating system. Integrators and end-customers can choose and deploy AI applications on these cameras to address operational challenges related to the COVID-19 pandemic. These apps are offered by S&ST’s development partners. Uses for applications include: Occupancy management Face mask detection Social distancing monitoring Real-time occupancy and face mask detection solutions A face mask detection app, offered by Geutebrück, enables efficient monitoring of people Security & Safety Things’ developer partners include Link Analytix, which is offering Retail Flux, a real-time occupancy solution designed to limit risk of infection for both shoppers and employees. SAIMOS has developed the SAIMOS Counting app, which can be used to monitor multiple entrances and exits to track occupancy in real-time and manage visitor access through automated displays at entry points. A face mask detection app, offered by Geutebrück, enables efficient monitoring of people to ensure compliance with prescribed hygiene concepts. This solution is able to recognise if an individual is wearing a protective mask and instantly notifies unprotected persons to onsite staff or remote operators via a connected Video Management System. SAIMOS also offers a feature for face mask detection in their counting app. Talos Social Distancing app CVEDIA’s Talos Social Distancing app features a foot traffic algorithm designed to detect and analyse at-risk areas for physical distancing in corporate or public spaces. This app detects people and the distances between them, while providing additional visual analytics that allow companies to improve current COVID-19 practices.
Body temperature measurement, detection of face masks and the counting of visitor flows - Geutebrück has expanded its portfolio to enable the retail trade, public authorities and operators of public transport and industry to adjust their protective measures to the current situation. Without having to resort to biometric data, the intelligent and highly available video security systems process images in real time. This way, both customers and personnel are being protected, and compliance with official regulations or prescribed hygiene measures is being controlled and documented. Contactless measurement of body temperature When measuring body temperature people are automatically screened. Fields of application are where many people come together, e.g. in companies, manufacturing plants, train stations, at airports, in public or private institutions. The automated face mask detection verifies compliance with such precautions and can - when connected to an access control system - allow or block entry to a building. Suitable for any facility with public access. Visitor management for restricting number of visitors Visitor counting and routing is of particular interest to shop owners, who need to ensure that the number of customers in their premises is kept below the maximum. As with all Geutebrück solutions, the most recent developments are GDPR-compliant and protect the privacy and personal rights of all those involved. "Our clients are facing unknown challenges in the current situation. Our solutions can help in many fields to overcome such challenges by means of visualisation and automatisation - yet without reaching capacity limits", says Christine Heger-Essig, Chief Technology Officer.
From 19 to 21 January 2020, Geutebrück will take part in the INTERSEC in Dubai. Geutebrück is an international expert for image-based security solutions Made in Germany, offering high-performance software and hardware. It can be versatilely used to guarantee security, maintain transparency and optimise processes, always in accordance with the stringent rules of the European Directive on the Protection of Personal Data (DS-GVO). Geutebrück will be introducing their partner Comtegra, with whom they share their stand with. Comtegra is a rising Technology Distribution Company with four core areas of business i.e. Digital Infrastructure, Cybersecurity, IoT and Physical Security and SaaS Applications. They carry years of Physical Security solutions experience, and are excited to launch and extend the benefits of Geutebrück products and solutions to partners and customers across the Middle East region. In the Trade Centre Arena, SA-N19, the solutions for facial recognition and object recognition will be presented. The experts from Germany are available for their guests at any time.
Related white papers
Security investments retailers should consider for their 2021 budget
How end-to-end video security solutions can help your organisation with social distancing
Understanding video management systems
Are your technology providers keeping you in the dark?Download
Facing the ever-evolving hacker head-onDownload
Ensuring cybersecurity of videoDownload
Capture new opportunities with computer vision and video analyticsDownload
ATG launches the Bridge Deck Expansion Beam next-gen bridge protection technology for the Centre for the Protection of National Infrastructure
- ATG launches the Bridge Deck Expansion Beam next-gen bridge protection technology for the Centre for the Protection of National Infrastructure
- VIVOTEK upgrades security at South Africa's BP Manor Garage Gas Station
- Matrix secured Nashik railway station during Kumbh Mela
- Dahua Technology installs HD CCTV cameras with smart analytics using AI to secure iconic Battle of Britain Bunker