Mechanical digital locks - Expert commentary

How schools can make outdoor learning safe and secure
How schools can make outdoor learning safe and secure

Schools were never designed and built with social distancing in mind. So it’s perhaps not surprising that as children returned to schools for the autumn term this year, the prospect of outdoor classes and assemblies was mooted in the media and by the Government. Many in the education sector are making the case that, should there be further COVID-19 outbreaks, in the coming months, it would be better to utilise outside space, rather than resort to closing schools. In the COVID-19 era, head teachers are considering taking learning and large gatherings, such as assemblies outdoors, when possible. Managing ‘class bubbles’, hygiene and ventilation While Dr. Yvonne Doyle, the Medical Director of Public Health England (PHE) has publicly reassured parents that schools are not the ‘drivers’ or ‘hubs’ of COVID-19-19 infection in communities, there is a lot of pressure on school leaders to manage ‘class bubbles’, extra cleaning and hygiene, ventilation, and COVID-19 testing, to protect families and staff. It’s a logical step to switch, in certain circumstances, to outdoor activities where fresh air is on tap, and social distancing is far easier to manage. Specially built outdoor classrooms Across the school and nursery sector, there’s ongoing investment in specially built outdoor classrooms Across the school and nursery sector, there’s ongoing investment in specially built outdoor classrooms, which had been growing in popularity, even before the pandemic. These facilities offer numerous benefits as an extension of existing learning spaces and provide children the opportunity for hands-on learning, beyond a stuffy classroom. However, if outdoor spaces are routinely called upon as part of COVID-19 contingency planning, how can schools ensure that their outdoor classrooms and wider areas are secure, robust, and fit for purpose? When specifying outdoor classrooms and learning spaces, it’s essential to take into account the well-being of the students and staff, who will use them, noise pollution and acoustics. Most importantly, education managers need to ensure the surrounding area is secured and adequately protected from threats, including terrorism. Perimeter security measures for schools How can schools and nurseries secure their perimeters, so that outdoor learning is totally safe for all? A starting point is to seek out architects and suppliers, who have a good understanding of security standards. Worryingly, Jacksons Fencing’s research recently found that only one-third of architects are seeing both LPS 1175 and the UK police initiative, Secured by Design (SBD) physical security standards, specified for schools. This highlights a lost opportunity for architects to propose solutions that are appropriate to the level of risk and needs of the school, without turning the site into an unwelcoming fortress. Helping schools identify specific security needs Head teachers would be wise to work with architects, who not only know the latest security standards inside and out, but are also are willing to play a more advisory role, helping the school identify exactly what is needed. Head teachers should prioritise solutions appropriate to their site’s specific risks It’s also vital that architects don’t simply replace existing fencing and gates, with the same security systems that have been in place for years. Instead, they will need to meet changing needs and risks. Our research finds that teachers often report issues, with the school perimeter and gates, from being climbed over (28%) and causing injury, to gates not locking properly (10%). Head teachers should prioritise solutions appropriate to their site’s specific risks, which sometimes require altering of existing measures. School fencing is an important aspect of any education site. As well as defining its boundary and making a visual distinction between public and private property, the fencing and gates that surround and secure a school, will typically meet a wide variety of other important criteria, including preventing unauthorised entry to the grounds, protecting pupils, staff, and visitors from accidents and injury, deterring theft and anti-social behaviour, and reducing the risk of malicious damage, and acts of terrorism. Welded mesh panels for perimeter fencing Popular options for schools include welded mesh panels for perimeter fencing or sports areas, and railing systems to act as demarcation, in order to control foot and car traffic. Within the outlying boundary, barriers, bollards and parking posts will keep pedestrians, and vehicles safe from each other, while timber fencing and gates can be designed to control the flow of people, around the grounds and reduce the areas, where students can be hidden from view. Automated gates and access control Perimeter fencing must be complemented with safe entrances and exits for vehicles and pedestrians. Every school has unique entry-control requirements, determined by factors, such as size, location and the local environment. These needs influence the decisions you make, when preparing technical specifications for school security gates. Do you require gates to be steel or timber, manual or automated, single or double leaf? Specialist suppliers will be in the best position to offer inputs on school gates, which typically need to offer solid security and durability, with a welcoming aesthetic. Specifying access control system When specifying a school access system, it’s important to consider the areas of the school When specifying a school access system, it’s important to consider the areas of the school, such as sports fields, car parks, and children’s play and learning areas, and whether it requires playground segregation. Selected gates should meet the design of the fencing, to create a secure perimeter with no weak points, with automated gates conforming to all current safety regulations. . Noise pollution can be a problem as well, including noise coming in or leaving the school in residential areas. If more teaching is to be carried out outside, it’s worth considering acoustic barriers to reduce noise in and around the school. Timber acoustic barriers for security and privacy Timber acoustic barriers offer security and privacy, and can reduce noise levels, by as much as 32 decibels (in laboratory conditions), so are ideal for city centre schools or those located close to busy highways. There are many ways to build an outdoor classroom. Timber products can help to create a welcoming environment, such as wooden shelters, pergolas, fencing, and decking. Always check that high quality timber, ideally guaranteed for 25 years against rot and insect attack, is being used to provide an attractive, cost-effective, safe and sustainable solution, for all weather conditions. DBS approved installers And of course, installers must be DBS approved, so that they can install outdoor classrooms, during school holidays, or within term time, with minimal disruption. The COVID-19 pandemic had a huge impact on schools and learning. While nobody wants to think of fresh outbreaks of the infection, or any other virus, installing an outdoor classroom made from high-quality, long-lasting materials is a great way to future-proof school learning and ensure safety, and preparedness. Putting extra thought and care into the security angle will provide schools with decades of protection against a host of unforeseen events.

What about electronic door locks with remote control?
What about electronic door locks with remote control?

Most consumers are enjoying the convenience brought by electronic locks. With the existence of electronic locks, people no longer need to be restricted by keys. There are a variety of unlocking methods and more convenient remote control unlocking options. Suppose, you are going on vacation, and with the presence of an electronic lock, you can easily enter your house with your babysitter, without a spare key. Of course, not only smart homes, but also some infrastructure and commercial buildings are enjoying the convenience, brought by electronic locks. Passive electronic lock access control system This article will introduce a smart electronic lock used in the infrastructure industry, named passive electronic lock access control system. In traditional manufacturing, mechanical locks are commonly used in all walks of life, to protect the safety of property and facilities. However, the mechanical lock has caused many practical problems in the long-term application. For example, the keys are duplicated randomly, the unlocking authority cannot be controlled, the user's operation records cannot be known, and the remote control is not possible. Imagine that if you are in a remote telecom base station, it happens that you have the wrong key in your hand and cannot open the front door. In such a situation, this lock, maybe the worst scenario. In some industries, with a wide scope and large working area, more attention must be paid to access control systems Therefore, in some industries, with a wide scope and large working area, more attention must be paid to access control systems. In some outdoor scenarios, such as base stations and electric power cabinets, the requirements for access control systems are quite strict. Due to the particularity of its environment, ordinary power-based access control systems will no longer be applicable. Therefore, the emergence of passive access control systems has solved these problems. Electronic locks offer intelligent management function Based on years of in-depth field research, Vanma has developed the Vanma passive electronic lock access control system, based on the current situation of the industry. This system is different from other electronic lock systems, as it integrates the advantages of both mechanical locks and electronic locks. It not only has the simplicity of mechanical locks, but also has the intelligent management function of electronic locks. The term ‘passive’ of passive electronic locks means that no power is needed. Passive electronic locks have the same appearance as ordinary mechanical locks, so they can be installed anywhere, just like common mechanical locks. They also have a variety of practical functions of electronic locks. Authorised remote access control The Vanma management software allows security managers to assign access rights to specific areas, for different technical personnel. In order to facilitate real-time access control, the electronic key can be used in conjunction with the mobile phone app, in order to send information about its access rights to the technicians, in real time. Vanma management software can provide access to all operations performed by technicians Vanma management software can provide access to all operations performed by technicians, including complete audit reports. Access attempts outside the specified time range or outside the specified area can be obtained through the report, so as to analyse any abnormal situations. Access control in extreme weather conditions In the access control system, the lock (lock cylinder) maintains an extremely high standard and its protection level is IP67, to ensure the greatest degree of protection. Infrared induction technology is used in the electronic key, even if the surface of the lock is wet, the electronic key can also transfer the access authority to the lock cylinder. Ensure stable exchange of information between the key and the lock cylinder. In other words, a poor connection cannot prevent the transmission of information between the key and the lock. At present, this kind of passive electronic lock is widely used in many fields, such as telecom, electric power, water utilities, public utilities, medical emergency and so on in Europe.

Open Supervised Device Protocol (OSDP) – what you need to know about modern and future proof access control security?
Open Supervised Device Protocol (OSDP) – what you need to know about modern and future proof access control security?

Access control and management of trusted identities are the building blocks of security, safety, and site management policies for many businesses and organisations. The current pandemic has compounded this with the introduction of new policies and regulations, particularly around social distancing and contact tracing. Most organisations will have some form of legacy access control in place, ranging from the most simplistic options, such as locks and keys, to technology-based systems. The issue with legacy systems of any type is that risks, just like technology, evolve. What was secure, convenient, and efficient a few years ago is often found wanting as the threat landscape changes. The standards governing the development and testing of physical access control systems (PACS) have also evolved to improve security and product interoperability. An example is the Open Supervised Device Protocol (OSDP), introduced 10 years ago as an alternative to the antiquated and vulnerable Clock-and-Data and Wiegand protocols. However, when it comes to planning infrastructure upgrades or implementing new tools, businesses must carry out due diligence to ensure the solutions are future-proof and deliver the expected level of security. Vulnerabilities and challenges In the early 1980s, Clock-and-Data and Wiegand protocols were widely adopted as the de-facto standard for interoperability between access control readers and physical access controllers. Those de-facto standards were later formalised and adopted into industry standards by the Security Industry Association in the 1990s. Wiegand is unencrypted and unable to protect from “man in the middle” attacks and vulnerabilities  There were weaknesses, though, Wiegand is unencrypted and unable to protect from “man in the middle” attacks and vulnerabilities from the reader to the controller. Not only that, but Wiegand delivers limited range options and is operationally inefficient. It is also easy to target via its learnable language and a host of hacking devices available via online sources. Furthermore, the retrofitting installation alongside a legacy system is complicated for integrators and expensive for organisations, as most readers require dedicated home-run wiring. Extensive wiring on a large-scale project, such as a school or corporate campus, results in considerable — often prohibitive — costs for the installation of a PACS. Legacy access control protocol Despite the well-publicised vulnerabilities and weaknesses, Wiegand is still one of the most common protocols in legacy access control, with estimates indicating it is used in more than 90 percent of installed systems. This not only presents issues about physical security but also raises concerns relating to the protection of personal data. Access control systems not only contain information about who can and cannot use certain doors. OSDP is a communication standard Modern systems include a wide range of personal data, ranging from qualifications and certifications of individuals, home contact details, and even medical conditions or HR and employment information. With the potential fines associated with GDPR breaches, companies need to take this concern seriously. These weaknesses pushed the security industry to adopt a new protocol: Open Supervised Device Protocol (OSDP). This access control communications standard was developed by Mercury Security (now part of HID Global) and HID Global in 2008, and donated, free of intellectual property, to the Security Industry Association (SIA) to improve interoperability among access control and security products. Since then, it has been adopted as a standard by SIA, becoming the first secure, bidirectional reader/controller protocol to be governed by a major standards body in the security industry. In 2020 OSDP reached an additional milestone in becoming an International Electrotechnical Commission (IEC) standard. Why implement OSDP as a standard? OSDP is the only protocol that is secure and open for communication between readers and controllers The growth of networked devices, such as video and access control products, has led to an increased demand for converged solutions. Businesses and organisations recognise the value of implementing an integrated solution to enhance security and add value to technology investment. OSDP is the only protocol that is secure and open for communication between readers and controllers and is also being widely adopted by industry-leading reader and controller manufacturers. It is an evolving, ‘living standard,’ making it a safer, more robust, future-proof option for governing physical access control systems. OSDP offers important benefits: 1) Increased security Implementing OSDP standards can increase security, as OSDP with Secure Channel Protocol (SCP) supports AES-128 encryption that is required in U.S. federal government applications. Additionally, OSDP constantly monitors wiring to protect against tampering, removing the guesswork since the encryption and authentication are predefined. 2) Bidirectional communication Early on, communication protocols such as Wiegand were unidirectional, with external card readers sending information one way to a centralized access control platform. OSDP has transformed the ability for information to be collected, shared, and acted upon with the addition of bidirectional communication for configuration, status monitoring, tampering, and malfunction detection, and other valuable functions. In fact, OSDP is the only open, non-proprietary, bidirectional, secure protocol for communication between card reader and physical access controller. 3) Open and interoperable OSDP adds new technology that enhances its ability to protect incoming and outgoing data collection OSDP supports IP communications and point-to-point serial interfaces, enabling customers to flexibly enhance system functionality as needs change and new threats emerge. They also can proactively add new technology that enhances their ability to protect incoming and outgoing data collection through a physical access control system. 4) Reduced installation costs OSDP’s use of two wires (as compared to a potential of 11 wires with Wiegand) allows for multi-drop installation, supervised connections to indicate reader malfunctions, and scalability to connect more field devices. Daisy-chaining accommodates many readers connected to a single controller, eliminating the need to run home-run wiring for each reader, and the use of a four-conductor cable achieves up to 10x longer distances between reader and controller than Wiegand while also powering the reader and sending/receiving data. 5) User friendly OSDP gives credential holders greater ease of use, with audio and visual feedback such as coloured lights, audible beeps, and the ability to display alerts on the reader. For security administrators, managing and servicing OSDP-enabled readers also becomes increasingly convenient, as OSDP-enabled readers can be remotely configured from network-connected locations. Users can poll and query readers from a central location, eliminating the cost and time to physically visit and diagnose malfunctioning devices. Unlimited application enhancements OSDP streamlines installations and upgrades while saving organisations the expense of replacing readers  OSDP supports advanced smartcard technology applications, including PKI/FICAM and biometrics, and other enhanced authentication protocols used in applications that require Federal Information Processing Standards (FIPS) compliance and interactive terminal capabilities. Audio-visual user feedback mechanisms provide a rich, user-centric access control environment. OSDP offers advantages for users, administrators, and integrators, alike. It adds security and real-world efficiencies, and its interoperability ensures that organisations can use systems from numerous manufacturers as they invest in infrastructure that maximises the protection of critical data. For our part, HID Global’s range of HID Signo readers is OSDP verified, ensuring they offer the intended interoperability and security for secure bidirectional communication and provide an easy migration from Wiegand devices. In a campus environment, OSDP streamlines installations and upgrades while saving organisations the expense of replacing readers if a new access control solution is implemented. There are also service and maintenance benefits as OSDP encourages continuous monitoring of system uptime and allows for remote configuration of -- or upgrades to -- a reader. Cost savings upon system upgrade Integrators can also capitalise on the introduction of OSDP by encouraging open standards, which can, in turn, help them build new customer relationships and win more projects. Although upgrading to access control systems that adhere to OSDP standards is a significant initiative, the range of benefits outweighs the cost of upgrading. Increased security coupled with business efficiencies adds value for those administering the system and a high level of interoperability ensures users can deploy systems from numerous third-party manufacturers. Integrators who understand the benefits of OSDP can also help their customers support both current and future technology requirements. When a site’s needs change, OSDP offers significant cost savings as the open functionality makes adding new devices easier and reduces the expense of requiring all readers to be replaced if a new solution is installed. Businesses and organisations transitioning to OSDP will also enhance value in terms of operational costs such as servicing and maintenance.

Latest ASSA ABLOY news

ASSA ABLOY Opening Solutions’ Incedo Business access control solution offers greater versatility for Clockwise’s flexible workspaces
ASSA ABLOY Opening Solutions’ Incedo Business access control solution offers greater versatility for Clockwise’s flexible workspaces

Following a change in employment practices, created by the COVID-19 pandemic, many office-based employees now follow a hybrid schedule, working where they are needed or find convenient. The fast-growing use of flexible offices and co-working spaces is a testament to this emerging trend. With employees coming and going as they please, a change in how security and access control are managed is an urgent, but overlooked aspect that many firms are just waking up to now. Clockwise, renowned office space provider Clockwise is the UK and European provider of flexible office space for entrepreneurs and established businesses. The company’s expanding offering includes contemporary offices, meeting rooms and shared workspaces, across multiple cities. Any business, which relies on flexibility, places high demands on door security and access control. Clockwise needs a broad choice of electronic devices to secure meeting rooms, private offices, communal spaces and main entrances, which may not all require the same lock type. Access management should adapt to changing needs Access management must be able to adapt and change, as fast as Clockwise clients’ needs The office space demands of a start-up, freelance co-worker or growing SMB can change at any time, so Clockwise offer a range of membership levels and packages. Access management must be able to adapt and change, as fast as Clockwise clients’ needs. Because tenants come and go frequently, Clockwise facility managers need tailoring of user access rights, to be as easy as possible. Clockwise’s own spaces and a portfolio may also evolve, so any access system must be able to scale instantly up or down. How flexibly Clockwise can deliver for their clients is essential to growing in such a competitive market. Incedo Business offers versatile access control The range of Incedo-enabled devices and door hardware, managed by simple cloud-based software, convinced Clockwise to choose ASSA ABLOY Opening Solutions’ Incedo Business, for all their premises. This platform-based access solution connects security software and hardware within a single, future-proofed ecosystem. The diversity of Incedo-enabled devices enables Clockwise to select the ideal electronic lock for every opening in their properties. Internal private office doors, ‘Zoom rooms’ and meeting rooms, as well as communal area doors, and entrance/exits, are now secured with wireless access control devices from the Incedo Business range. Flexible system management options Incedo’s flexible system management options help Clockwise to operate access control with maximum efficiency. Administrators quickly create groups with tailored access for specific doors. Access permissions may also be time-limited, which is perfect for meeting room bookings or for facilitating access hours for different membership options. Private desk members get 24/7 admission, whereas hot-desk membership is only allowed entry during office hours. According to Clockwise, the flexibility to create groups and the ability to remotely update cards, both work really well for their business.

PSIA approves the Secure Credential Interoperability (SCI) 1.0 specification
PSIA approves the Secure Credential Interoperability (SCI) 1.0 specification

The Physical Security Interoperability Alliance (PSIA) announces it has approved the Secure Credential Interoperability (SCI) 1.0 specification. The PSIA has been working with a broad group of industry pioneers in the access control industry to come up with this specification, which is likely to have a significant influence on the future of secure mobile credentials. Mohammad Soleimani, the Chief Technology Officer of Kastle Systems and the Chairman of the SCI Work Group, introduced this concept to the organisation in 2020 and has had a strong influence in engaging other companies in its development. Compatible secure credential “A standard for secure mobile credentials has been long overdue in the industry. SCI relies on established standards and the Public Key Infrastructure, to provide a simple, but elegant solution,” said Soleimani. SCI addresses the need for a universally compatible secure credential for the physical access control industry in the form of cards, fobs, mobile devices, and wearables. Progress has been dramatic, with the technology being demonstrated at a PSIA technical meeting in August featuring apps from IDEMIA and Johnson Controls and a Kastle reader developed by WaveLynx. “It has been our mission from day one, to drive secure credentials and interoperability into the market” said Laurie Aaron, Executive Vice President at WaveLynx Technologies Corp. “Joining PSIA to collaborate and execute on a standard that is made available to all, has been a fast track to mission success.” Different mobile platforms The SCI specification helps the industry to take steps towards the last mile of credential evolution" One of the important characteristics of SCI is its interoperability across different mobile platforms including iOS and Android or devices with the ability to generate ephemeral key pair, which can be communicated over various protocols such as BLE (Bluetooth Low Energy), NFC (Near Field Communication), and UWB (Ultra-wide band). “The SCI specification helps the industry to take steps towards the last mile of credential evolution where interoperability of credentials can exist. The simplicity of the use of a public key leveraging standards and best practices ensure a secure and open way to manage credentials that takes proprietary out of the picture.” says Jason Ouellette, the Head of Technology and Business Innovation for Johnson Controls Access Control and Video Solutions business. Security industries’ efforts Participants in the spec development include, ASSA ABLOY, Deister Electronics, Farpointe Data (a dormakaba company), HID, IDEMIA, Kastle Systems, LenelS2, rf IDEAS, SentryCard, Siemens, and Johnson Controls. “This is an important milestone in the security industries’ efforts to enable flexible, interoperable and scalable solutions,” states Peter Boriskin, Chief Technology Officer for ASSA ABLOY Opening Solutions Americas. “It will be essential to consider how this and other standards apply across various industries, and how current and emerging standards impact each other.”

TDSi launches new additions to its powerful GARDiS integrated access management software, with the new Version 2.2
TDSi launches new additions to its powerful GARDiS integrated access management software, with the new Version 2.2

Integrated security systems manufacturer, TDSi is proud to announce the launch of exciting new additions to its powerful GARDiS integrated access management software, in the new Version 2.2. New features added to the GARDiS platform Version 2.2 include integration with the STid BLE (Bluetooth Low Energy) mobile device authentication portal, integration with the RS485 wireless locks from ASSA Abloy and SimonsVoss, integration with the new TDSi GARDiS VU VMS software, and a new Cause and Effect Engine. GARDiS platform Version 2.2 The latest additions add valuable features to the ever-evolving GARDiS platform The latest additions add valuable features to the ever-evolving GARDiS platform, as Tina Baker, Software Project Manager at TDSi comments, “GARDiS is designed to evolve, anticipate and cater for a rapidly changing security/safety landscape. Both integration with the STid BLE portal and support for RS485 wireless locks provide greater flexibility in deploying highly secure touch-free access control.” Tina Baker adds, “Integration with our new GARDiS VU VMS solution, which is powered by our fellow VITAPROTECH Group partner and specialist in intelligent cloud video surveillance RECAS, enables customers to benefit from this next-generation solution.” STid BLE Portal integration Integration with the STid Portal provides easy, but highly secure use of a mobile device as access control authentication. By utilising the ubiquitous mobile phone, organisations can easily share or rescind access approval. GARDiS v2.2’s integration ensures easy administration of this function (using a STid login). GARDiS v2.2 now features RS485 integration with ASSA Abloy and SimonsVoss wireless locks. This adds further resilience, by enabling them to communicate directly with the controller, even if the IP network is interrupted, in order to ensure continuous secure access control. TDSi GARDiS VU VMS software integration The latest version of the GARDiS software now features integration with TDSi’s new GARDiS VU VMS solution, which has been developed in partnership with RECAS. This ensures full and seamless integration of access control and the video surveillance network, all from a single central portal. The all-new Cause and Effect module fully automates a response to one or multiple inputs (such as an intruder panel for example), so the security operator is assured that the system will enact the required action, without the need for human intervention. Cause and Effect engine The Cause and Effect engine operates on both the main security server and the local controller To meet any eventuality or situation, the Cause and Effect engine operates on both the main security server and the local controller. This ensures that even if there is a communications loss between the two, the access control function remains fully operational. It also provides easy to create and update Cause and Effect records that are bespoke to the security needs of the organisation/facility, with detailed report generation on-hand, whenever required. GARDiS Pro v2.2 also now includes a widget that enables a visual check of an access event (be it via a card, mobile or biometric credential), delivering an image of the authorised person for verification. Unlimited additional fields and new interface To add even greater flexibility to the GARDiS system, v2.2 also provides unlimited additional fields per user record. This enables the creation of bespoke fields and additional space to log notes, as required. Additionally, v2.2 also provides a revised user interface, which centralises operations and makes rapid navigation easier. Tina Baker concludes, “All these new functions are the result of close consultation with our installation partners and customers, adding true value-add features that help to improve and refine secure access control operations, and the user experience, benefitting any organisation or business that needs them.” The new features are available to download and install now through v2.2 of the GARDiS integrated access management software.

Related white papers

Wireless Access Control eBook

How plate reader technology increases your perimeter security