Pyronix Intruder Detectors & Detection Systems(45)
Perimeter protection is one of the most effective ways to prevent an intruder. A more secure system is one that alerts the user of the presence of an intruder, before they can break into the property. It’s a simple idea, but fitting an external detector comes with challenges. Install the brand-new XDL12TT-AM and provide up to 12m premium and robust pet-friendly external detection. Consisting of two independent Passive Infrared (PIR) sensors and one microwave sensor, the Tri-Technology (TT) of the XDL12TT-AM utilises Tri-Signal Detection Logic to identify the presence of an intruder. This provides reliable and stable external detection as all three sensors must be activated sequentially in quick succession to create an alarm. This enhances the detector’s immunity to environmental disturbances and limits the risk of false alarms. With Dual-Vision Pet Immune Technology, each PIR sensor of the XDL12TT-AM has its own dedicated volumetric field of view. The top PIR detects outwards and up, while the bottom PIR detects outwards and down, without overlapping. This setup, alongside Tri-Signal Detection Logic, delivers highly secure sequential detection and increases its tolerance to pet immunity. So, should any large dogs or cats stray into the coverage plane, it would only be picked up by the bottom PIR and the microwave sensors and therefore an alarm condition would not be activated. However, the lens coverage of the PIRs are angled so that any human will be detected walking through both PIR coverage planes. Therefore, as all three sensors are activated, so would an alarm condition. This increases the detectors stability and limits the risk of false alarms. In terms of changing conditions and swaying vegetation, the XDL12TT-AM features Anti-Sway Analytics. This advanced digital filter distinguishing between the movements of trees and plants from that of an intruder, to maintain optimum performance. The detector also boasts IP55 weatherproof rating, thick polycarbonate plastics and fully sealed optics for optimum external performance. It has even been moulded with a stabilising material to prevent discolouration over time! The XDL12TT-WE also features Anti-Interference Technology to prevent intruders from bypassing detection. This consists of Anti-Masking, which is a Grade 3 Patented Technology that protects against any attempt to mask any of the three sensors with cardboard, duct tape, sprays, lacquers or aluminium foil. It also consists of Anti-Blocking, which is a Grade 4 Technology that prevents the system from being armed if there is anything blocking the vision of any of the sensors. Therefore, to arm the system, whatever is blocking the detector from detecting needs to be removed first. Providing either volumetric or curtain coverage to suit the area that needs protecting, each lens can also be masked to restrict the coverage area. This is particularly useful in areas where busy roads can cause false alarms. The detector also boasts three different frequency bands to avoid any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other. This also allows multiple to be fitted, including the use of a fixed bracket, which enables two to be fitted back to back, providing 24m range with 180° volumetric coverage. Whatever the requirement, the XDL12TT-AM provides the ideal external security solution.Add to Compare
Strong wireless signalling, multi-award-winning Enforcer two-way wireless technology and a whole host of intelligent reliability, security and detection features have all gone into the XDL12TT-WE. The first low-mount wireless outdoor detector of the Pyronix range combines multi-award-winning Enforcer two-way wireless technology with dependable external detection protocols, including: Dual-Vision Pet Immune, Tri-Signal Detection Logic and Gaussian Frequency Modulation (GFM), to deliver a highly dependable wireless external detector. IP55 weatherproof rated and consisting of two independent passive infrared (PIR) sensors and one microwave (MW) sensor in one common housing, its Tri-Technology (TT) delivers advanced outdoor protection. This is because, to identify the presence of an intruder, the XDL12TT-WE utilises Tri-Signal Detection Logic alongside TT, whereby all three sensors must be activated sequentially in quick succession to create an alarm. This heightens the detector’s immunity to false alarms and ensures optimum detection performance in external conditions. Along with Tri-Signal Detection Logic and TT, Pyronix has also pre-empted potential false alarm issues from the presence of pets or swaying vegetation, by including Dual-Vision Pet Immune and Anti-Sway Analytics features. Dual-Vision Pet Immune of the XDL12TT-WE consists of its two PIRs having a dedicated volumetric field of view, with the top PIR detecting outwards and up, while the bottom PIR detects outwards and down, without either crossing the central horizontal plane between them. This setup of non-overlapping PIR sensors alongside Tri-Signal Detection Logic, delivers highly secure sequential detection and increases its tolerance to pet immunity. Anti-Sway Analytics digitally filters the environment to distinguish between the movement of trees and plants from the movements of an intruder, so that false alarm activations are kept to an absolute minimum. These external detection protocols then benefit from the advantages of Enforcer two-way wireless technology, with full supervision, anti-jamming and 128-bit wireless protocol encryption, to maximise the new XDL12TT-WE’s reliability; ensuring signals transmitted by the system are protected and any code-grabbing is prevented. Two-way wireless also brings with it a whole host of installation benefits, without the invasive nature of fitting wired peripherals. This increases the efficiency of the installation for our customers, while providing a steadfast detector for end-users. In terms of the wireless signal, the XDL12TT-WE’s high sensitivity receiver is capable of a wireless signal range of up to 1.6km in open space, which reduces the need for repeaters and therefore reduces the installation cost. In addition, the high-sensitivity antenna of the XDL12TT-WE ensures that the signals being transmitted and received are as strong as possible, by utilising GFM to spread the signal, while reducing unwanted noise and harmonics. This enables the outdoor detector to meet stringent European, ETSI and other worldwide standards. When it comes to wireless outdoor security, why not deliver the XDL12TT-WE?Add to Compare
As the intruder market increasingly converges, with products and solutions entering from various rival markets, the time to integrate and evolve is now. There has been a rapid increase in end-user targeting, with solutions that deliver more than just security, but lifestyle solutions, including remote video monitoring, automation capabilities and more. This added value makes a system a desired enhancement to day-to-day life, rather than simply a grudge purchase to deter or alert of intrusion. It’s time to advance into new market applications and grow your business, by offering it all, with the totally integrated Enforcer V12 and Hik-Connect smart device application. With professional security integrity in mind, Hik-Connect is a user-friendly smart device application that brings together Pyronix multi-award-winning intruder security systems and technologies, with Hikvision’s world-leading video surveillance technologies and innovation. This seamless synergy enables you to deliver fully integrated and secure systems that are easy-to-install, flexible, extensive and meet your end users’ needs and desires. Thanks to seamless Hik-Connect integration, you can offer the ability to arm and disarm, check the status of any detector or sensor on the system and control any automation outputs, as well as access complete video monitoring of the property from anywhere, thanks to compatibility with any Hikvision video device. Available on Android and iOS, your end users can check any events, monitor when their children have arrived home safe from school, see what pets are getting up to, monitor outbuildings or even answer their front door or respond to deliveries with mic-enabled cameras, as well as see all the push notifications they have received - all from the palm of their hand. Should an event occur on the system, they can also simply and easily switch between their control panel and cameras for quick video verification. This simple switching also allows for easy multi-site monitoring, access to camera recordings and previews of live-streams. Deliver a security and video monitoring centre in the palm of the end user’s hand for any residential or commercial purpose. Hik-Connect is compatible with app-enabled Pyronix Grade 2 and Grade 3 security systems; offering outstanding usability and flexibility that is simple to install and easy to use. It’s time to advance. It’s time to integrate.Add to Compare
15 m m coverage, 14 degree o detection angle, PIR Detectors, Dual Technology Detectors, Infra Red Beams, Microwave, Dual Element Sensor, 15 m, Temperature Compensation, Sealed Optics, Anti-Masking, 1.2 m, Independant Floating Thresholds (IFT), Outdoor, Wall, 9 ~ 16 V DC, 13.8 V DC, 188 x 84 x 77, -30 ~ +70 C (-22 ~ +158 F)Add to Compare
15 m coverage, 85 degrees o detection angle, PIR Detectors, Dual Technology Detectors, Infra Red Beams, Dual Element Sensor, Temperature Compensation, Sealed Optics, 1.8 ~ 2.4 m, Yes, White Light Filter, Wall, ceiling, 117 x 69 x 50, -30 ~ +70 C (-22 ~ +158 F)Add to Compare
10 m coverage, 10 o detection angle, PIR Detectors, Dual Technology Detectors, Microwave, Pet Tolerance, Dual Element Sensor, Temperature Compensation, Sealed Optics, Wall, Ceiling, 1.8 ~ 2.4 m, Wall, Ceiling, 117 x 69 x 59, -10 ~ +40 C (14 ~ 104 F)Add to Compare
10 m coverage, 85 degree o detection angle, PIR Detectors, Dual Technology Detectors, Microwave, Pet Tolerance, Dual Element Sensor, Temperature Compensation, Sealed Optics, Wall, Ceiling, 2.4 m, White Light Filter, Wall, Ceiling, 9-16 V DC, 13.8 V DC, 117 x 69 x 50, -10 ~ +40 C (14 ~ 104 F), 24 mA ~ 30 mAAdd to Compare
15 x 30 m coverage, 20 o detection angle, Dual Technology Detectors, Dual Element Sensor, Temperature Compensation, Sealed Optics, Wall, Ceiling, 4 m, White Light Filter, Wall, Ceiling, 9 ~ 16 V DC, 117 x 69 x 50, -10 ~ +40 C (14 ~ 104 F), 13 ~ 16mAAdd to Compare
Browse Intruder Detectors & Detection Systems
- PIR Detectors
- Glassbreak Detectors
- Infra Red Beams
- Shock Sensor
- Pet Tolerance
Intruder detector products updated recently
There’s a lot of hype around the term ‘digital transformation.’ For some, it’s the integration of digital technology into everyday tasks. For others, it’s the incorporation of innovative processes aimed at making business optimisation easier. In most cases, digital transformation will fundamentally change how an organisation operates and delivers value to its customers. And within the security realm, the age of digital transformation is most certainly upon us. Technology is already a part of our day-to-day lives, with smart devices in our homes and the ability to perform tasks at our fingertips now a reality. No longer are the cloud, Internet of Things (IoT) and smart cities foreign and distant concepts full of intrigue and promise. Enhancing business operations We’re increasingly seeing devices become smarter and better able to communicate with each other These elements are increasingly incorporated into security solutions with each passing day, allowing enterprises the chance to experience countless benefits when it comes to enhancing both safety and business operations. The term ‘connected world’ is a derivative of the digital transformation, signifying the increasing reliance that we have on connectivity, smart devices and data-driven decision-making. As we become more familiar with the advantages, flaws, expectations and best practices surrounding the connected world, we can predict what issues may arise and where the market is heading. We’re increasingly seeing devices become smarter and better able to communicate with each other through the IoT to achieve both simple goals and arduous tasks. Within our homes, we’re able to control a myriad of devices with commands (‘Hey Google...’ or ‘Alexa...’), as well as recall data directly from our mobile devices, such as receiving alerts when someone rings our doorbell, there’s movement in our front yard or when a door has been unlocked. Analytics-driven solutions The focus is now shifting to the business impacts of connectivity between physical devices and infrastructures, and digital computing and analytics-driven solutions. Within physical security, connected devices can encompass a variety of sensors gathering massive amounts of data in a given timeframe: video surveillance cameras, access control readers, fire and intrusion alarms, perimeter detection and more.As the data from each of these sensors is collected and analysed through a central platform, the idea of a connected world comes to fruition, bringing situational awareness to a new level and fostering a sense of proactivity to identifying emerging threats. The connected world, however, is not without its challenges, which means that certain considerations must be made in an effort to protect data, enhance structured networking and apply protective protocols to developing technology. Physical security systems We can expect to see the conversations regarding data privacy and security increase as well As the use of connected devices and big data continue to grow, we can expect to see the conversations regarding data privacy and security increase as well. Connectivity between devices can open up the risk of cyber vulnerabilities, but designing safeguards as technology advances will lessen these risks. The key goal is to ensure that the data organisations are using for enhancement and improvements is comprehensively protected from unauthorised access. Manufacturers and integrators must be mindful of their products' capabilities and make it easy for end users to adhere to data sharing and privacy regulations. These regulations, which greatly affect physical security systems and the way they're managed, are being implemented worldwide, such as the European Union's General Data Protection Regulation (GDPR). In the United States, California, Vermont and South Carolina have followed suit, and it can be expected that more countries and U.S. states develop similar guidelines in the future. Technology is already a part of our day-to-day lives, with smart devices in our homes and the ability to perform tasks at our fingertips now a reality Automatic security updates Mitigating the concerns of the ‘connected world’ extends beyond just data privacy. IoT technology is accelerating at such a pace that it can potentially create detrimental problems for which many organisations may be ill-prepared - or may not even be able to comprehend. The opportunities presented by an influx of data and the IoT, and applying these technologies to markets such as smart cities, can solve security and operational problems, but this requires staying proactive when it comes to threats and practicing the proper protection protocols. As manufacturers develop devices that will be connected on the network, integrating standard, built-in protections becomes paramount. This can take the form of continuous vulnerability testing and regular, automatic security updates. Protocols are now being developed that are designed to ensure everything is encrypted, all communications are monitored and multiple types of attacks are considered for defensive purposes to provide the best security possible. IoT-connected devices Hackers wishing to do harm will stop at nothing to break into IoT-connected devices Built-in protection mechanisms send these kinds of systems into protection mode once they are attacked by an outside source. Another way for manufacturers to deliver solutions that are protected from outside threats is through constant and consistent testing of the devices long after they are introduced to the market. Hackers wishing to do harm will stop at nothing to break into IoT-connected devices, taking every avenue to discover vulnerabilities. But a manufacturer that spends valuable resources to continue testing and retesting products will be able to identify any issues and correct them through regular software updates and fixes. ‘IoT’ has become a common term in our vocabularies and since it’s more widely understood at this point and time, it's exciting to think about the possibilities of this revolutionary concept. Providing critical insights The number of active IoT devices is expected to grow to 22 billion by 2025 — a number that is almost incomprehensible. The rise of 5G networks, artificial intelligence (AI) and self-driving cars can be seen on the horizon of the IoT. As more of these devices are developed and security protocols are developed at a similar pace, connected devices stand to benefit a variety of industries, such as smart cities. Smart cities rely on data communicated via the IoT to enhance processes and create streamlined approaches Smart cities rely on data communicated via the IoT to enhance processes and create streamlined approaches to ensuring a city is well-run and safe. For example, think of cameras situated at a busy intersection. Cameras at these locations have a variety of uses, such as investigative purposes in the event of an accident or for issuing red-light tickets to motorists. But there are so many other possible purposes for this connected device, including providing critical insights about intersection usage and traffic congestion. These insights can then be used to adjust stoplights during busy travel times or give cities valuable data that can drive infrastructure improvements. Physical security market The impact of connected devices on cities doesn’t stop at traffic improvement. The possibilities are endless; by leveraging rich, real-time information, cities can improve efficiencies across services such as transportation, water management and healthcare. However, stringent protections are needed to harden security around the networks transmitting this kind of information in an effort to mitigate the dangers of hacking and allow this technology to continuously be improved. Whether you believe we’re in the midst of a digital transformation or have already completed it, one thing is certain: businesses must begin thinking in these connectivity-driven terms sooner rather than later so they aren’t left behind. Leveraging smart, connected devices can catapult organisations into a new level of situational awareness, but adopting protections and remaining vigilant continues to be a stalwart of technological innovation within the physical security market and into the connected world.
Johnson Controls recently unveiled the findings of its 2018 Energy Efficiency Indicator (EEI) survey that examined the current and planned investments and key drivers to improve energy efficiency and building systems integration in facilities. Systems integration was identified as one of the top technologies expected to have the biggest impact on the implementation in smart buildings over the next five years, with respondents planning to invest in security, fire and life-safety integrations more so than any other systems integration in the next year. As advanced, connected technologies drive the evolution of smart buildings, security and safety technologies are at the center of more intelligent strategies as they attribute to overall building operations and efficiencies. SourceSecurity.com spoke with Johnson Controls, Building Solutions, North America, VP of Marketing, Hank Monaco, and Senior National Director of Municipal Infrastructure and Smart Cities, Lisa Brown, about the results of the study, smart technology investments and the benefits of a holistic building strategy that integrates security and fire and life-safety systems with core building systems. Q: What is the most striking result from the survey, and what does it mean in the context of a building’s safety and security systems? The results show an increased understanding about the value of integrating safety and security systems with other building systems Hank Monaco: Investment in building system integration increased 23 percent in 2019 compared to 2018, the largest increase of any measure in the survey. When respondents were asked more specifically what systems they we planning to invest in over the next year, fire and life safety integration (61%) and security system integration (58%) were the top two priorities for organisations. The results show an increased understanding about the value of integrating safety and security systems with other building systems to improve overall operations and bolster capabilities beyond the intended function of an individual system. Q: The survey covers integration of fire, life safety and security systems as part of "smart building" systems. How do smarter buildings increase the effectiveness of security and life safety systems? Hank Monaco: A true “smart building” integrates all building systems – security, fire and life-safety, HVAC, lighting etc. – to create a connected, digital infrastructure that enables individual technologies to be more intelligent and perform more advanced functions beyond what they can do on their own. For example, when sensors and video surveillance are integrated with lighting systems, if abnormal activity is detected on the building premise, key stakeholders can be automatically alerted to increase emergency response time. With integrated video surveillance, they also gain the ability to access surveillance footage remotely to assess the situation. When sensors and video surveillance are integrated with lighting systems abnormal activity on the premise can automatically be detected Q: How can integrated security and life safety systems contribute to greater energy efficiency in a smart building environment? Hank Monaco: Security, fire and life-safety systems can help to inform other building systems about how a facility is used, high-trafficked areas and the flow of occupants within a building. Integrated building solutions produce a myriad of data that can be leveraged to increase operational efficiencies. From an energy efficiency standpoint, actionable insights are particularly useful for areas that are not frequently occupied or off-peak hours as you wouldn’t want to heat or cool an entire building for just one person coming in on the weekend. When video surveillance is integrated with HVAC and lighting systems, it can monitor occupancy in a room or hallway. The video analytics can then control the dimming of lights and the temperature depending on occupant levels in a specific vicinity. Similarly, when access control systems are integrated with these same systems, once a card is presented to the reader, it can signal the lights or HVAC system to turn on. In this example, systems integration can ultimately help enable energy savings in the long run. Security and life safety systems contribute to help enable greater energy efficiency and energy savings in the long run Q: What other benefits of integration are there (beyond the core security and life safety functions)? Hank Monaco: Beyond increased security, fire and life-safety functions, the benefits of systems integration include: Increased data and analytics to garner a holistic, streamlined understanding of how systems function and how to improve productivity Ability to track usage to increase efficiency and reduce operational costs Enhanced occupant experience and comfort Increased productivity and workflow to support business objectives Smart-ready, connected environment that can support future technology advancements Q: What lesson or action point should a building owner/operator take from the survey? How can the owner of an existing building leverage the benefits of the smart building environment incrementally and absent a complete overhaul? Lisa Brown: Johnson Controls Energy Efficiency Indicator found that 77% of organisations plan to make investments in energy efficiency and smarter building technology this year. This percentage demonstrates an increased understanding of the benefits of smart buildings and highlights the proactive efforts building owners are taking to adopt advanced technologies. There is an increased understanding that buildings operate more effectively when different building systems are connected As smart buildings continue to evolve, more facilities are beginning to explore opportunities to advance their own spaces. A complete overhaul of legacy systems is not necessary as small investments today can help position a facility to more easily adopt technologies at scale in the future. As a first step, it’s important for building owners to conduct an assessment and establish a strategy that defines a comprehensive set of requirements and prioritises use-cases and implementations. From there, incremental investments and updates can be made over a realistic timeline. Q: What is the ROI of smart buildings? Lisa Brown: As demonstrated by our survey, there is an increased understanding that buildings operate more effectively when different building systems are connected. The advanced analytics and more streamlined data that is gathered through systems integration can provide the building-performance metrics to help better understand the return on investment (ROI) of the building systems. This data is used to better understand the environment and make assessments and improvements overtime to increase efficiencies. Moreover, analytics and data provide valuable insights into where action is needed and what type of return can be expected from key investments.
Across the country, law enforcement officers are finding it increasingly difficult to respond to the near overwhelming number of calls coming from security alarms. Police departments commonly define a false alarm as a call, which upon investigation, shows no evidence of criminal activity, such as broken windows, forced doors, items missing, or people injured. While false alarms bog down police, they can also negatively impact customers and integrators. End users can expect hefty fines for false alarm responses, and when these customers receive large bills from the city, many turn to installers, dealers, and even manufacturers expecting them to accept the responsibility and pay the bill. What first brought the issue of alarm verification to your attention? It is crucial to both see a situation and concurrently listen to any corresponding sounds to gain full insight I’ve been aware of the problem of false alarms for about 5 years. I believed audio capture, through microphone deployment, could be an active part of the solution when used as a second source for indicating ‘out of the norm’ activity and as an equal component with the video surveillance technology. In 2015, I found similarly minded security professionals when introduced to the Partnership for Priority Verified Alarm Response. After reading PPVAR’s paper on ‘Audio Verified Alarms Best Practices; [April 2015],’ I knew that the Partnership was on to something important. In our lives, two of the five senses we count on day-in and day-out are sight and sound. It is crucial to both see a situation and concurrently listen to any corresponding sounds to gain full insight. What is the false alarm rate? In 2016, the International Association of Chiefs of Police reported that over 98 percent of all alarm calls in the United States were false. This number is obviously staggering, and something we need to work towards correcting. Why did this issue resonate so strongly with you? When I first investigated this issue, I was sure that the security industry would have already recognised this and was acting to ensure improved alarm verification, preferably through a combination of audio and video technologies. However, I quickly saw that this was not the case, or even close to the norm. I have questioned the rationale behind the lack of adoption and found the deployment of audio is often hindered by the concern of privacy. I’ve spearheaded many initiatives to explain the monitoring policies surrounding audio As CEO of Louroe Electronics, I’ve spearheaded many initiatives to explain the monitoring policies surrounding audio. I’ve had to reassure many security personnel and customers how the law supports the use of audio in public places as long as there is no expectation of privacy. By dispelling fears with facts around deploying and implementing audio sensors, customers can confidently include audio in their surveillance systems and gain a more effective security solution. Who is affected by this? Truth be told, everyone from the end user to the manufacturer is affected by this issue. Not to mention the strain this puts on law enforcement who are tired of ‘wasting time’ and effort out in the field on these nuisance alerts. When an end user receives a bill for their false alarm, many of them will immediately blame the integrator and or the monitoring center for a faulty set up and management and expect the integrator to remedy the situation, including carry the burden of paying the fines. The integrator, on the other hand, will turn to the manufacturer, assuming faulty equipment and installation instructions; therefore, looking for reimbursement for the cost. What is the average false alarm fee? It depends on many factors, and especially your first responder assigned location for responseIt depends on many factors, and especially your first responder assigned location for response. According to the Urban Institute, fees generally range from $25-$100 for the first offense, rising as high as a few thousand dollars per false alarm if a location has a large number in a single year. What’s worse, in extreme cases, alarm systems may even be blacklisted by the police dispatch center if they have raised too many false alarms in the past. Why do you believe audio is the ideal technology for secondary source verification? Video surveillance has been the main option for security monitoring and alarm validation for decades, however industry professionals are realising that video alone is not enough. Video only tells half of the story, by adding audio capture, the responsible party gains a turnkey solution with the ability to gather additional evidence to verify alerts and expand overall awareness. In reality, audio’s range is greater than the field of view for a camera. Sound pickup is 360 degrees, capturing voices, gunshots, breaking glass, sirens, or other important details that a fixed camera many not see. How would a secondary source verification system work with audio? Using a video monitoring solution equipped with audio, the microphone will pick up the sounds at the time a visual alert or alarm is triggered. If embedded with classification analytics, the microphone will send alerts for specific detected sounds. The captured audio, and any notifications are immediately sent to the monitoring station, where trained personnel can listen to the sound clip, along with live audio and video from their station. When law enforcement receives a validated alarm, they can better prioritise the response From here, an informed decision can then be made about the validity of the alarm, along with what the current threat is at the location. If the alarm is in fact valid, the information is then passed along to the law enforcement within minutes. When law enforcement receives a validated alarm, they can better prioritise the response. It also provides more information in a forensic evaluation. Are there any additional resources you would suggest looking into? Yes, we would suggest looking into the following to see a few different perspectives on the matter: NSA Support For 2018 Model Ordinance For Alarm Management and False Alarm Reduction Partnership for Priority Verified Alarm Response Support for the Term “Verified Alarm” and Prioritising Verified Alarm Responses Urban Institute Opportunities for Police Cost Savings without Sacrificing Service Quality: Reducing False Alarms
Pyronix is delighted to provide even more value and capabilities to installers and users alike, with the addition of video verification to ProControl+. Now, using our Enforcer V10 control panel, Wi-Fi cameras and security and life safety peripherals, the system can be tailored to detect, notify and verify any activity. “We’re really pleased to add this latest feature to our ProControl+ app,” said Pyronix Marketing Manager, Laurence Kenny. "Video verification delivers fantastic upsell opportunities to video monitoring for our installers, while providing greater functions for the user; showing them exactly what activity has triggered an event or alarm.” The addition of video verification enables the linkage of Pyronix Full-HD Wi-Fi cameras to inputs on the system via the PyronixCloud. This simple setup process adds greater scope to security; providing a 25 second video clip directly to the user via ProControl+ when an event or alarm activation occurs. The clip, which can be downloaded and stored as an MP4 file, shows 15 seconds pre-alarm and 10 seconds post-alarm; allowing the user to truly verify the activation, before taking appropriate action. Voice push notification Whether it’s an existing system or maintainance, service can be offered to provide greater selling options for installers" For example, should an intruder be detected by an XDL12TT-WE outdoor detector, a push or voice push notification will be received by the user through their ProControl+ app, via the Enforcer V10 and PyronixCloud infrastructure. If this detector has been linked to an outdoor Mini Dome camera surveying the area, the user will also be provided with the 25 second video from the linked camera to verify the alarm. “By adding this new feature, we’re giving installers new services to offer their customers; expanding the security offering by providing real tangible benefits across both residential and commercial applications to users,” Laurence commented. "So, whether it’s an existing system, a maintenance visit or a brand-new installation, this added-value service can be offered to provide greater selling options for the installer and greater functions for the user. Simple to setup and deliver via the PyronixCloud, we want to make sure we continue to proactively provide more features, functions and capabilities via ProControl+.” Video verification for applications With video verification already added to ProControl+, more developments are in the pipeline “Now, the system not only alerts the user via voice push notification, but also shows exactly what activity has taken place on the system, so that appropriate action can be taken. Our objective is to continue to extend the potential of every installation and the level of function and value it adds to installers and users alike and we intend to do this as seamlessly and easily as possible.” Linking cameras with inputs can be set up to deliver video verification for various applications across the entire security system, from setting and unsetting, indoor detection, shock sensors and outdoor detectors, to life safety sensors, door and window contacts and even panic, hold-up and medical alerts; providing additional product upsell opportunities. With video, voice push notifications and now video verification already added to ProControl+ and many more developments in the pipeline, now’s the time to make the switch.
At IFSEC International 2019, Hikvision, the global supplier of innovative video surveillance products and solutions, will help launch the pioneering Secure by Default initiative, and unveil a host of its new product and technology developments. Secure by Default is a set of minimum requirements which for the first time will provide a guarantee for users that network video security products are as secure as possible in their default settings out of the box. Secure by Default will be launched by UK Surveillance Camera Commissioner Tony Porter as part of the first National Surveillance Camera day, the launch of which takes place on Thursday June 20 from 10am to 10:45am at the IFSEC Key Note arena. Porter’s address is followed immediately by a Hikvision interview panel further discussing Secure by Default and featuring Tony Porter, Detective Constable Patrick McBrearty, who is the Cyber Protect Officer within the Regional Organised Crime Unit for the West Midlands, Norbain’s Jeremy Hockham, and Hikvision’s Gary Harmer. Products and technology developments During IFSEC International 2019, Hikvision will be showcasing a host of its latest products and technology developments, including its: HikCentral Solution Deep Learning Series Panoramic Series Turbo HD Series Pro Series & Ultra Series PTZ Series Access Control & Intercom Series Smart Retail Solution Smart City Solution Smart Utilities Solution DarkFighterX Technology Technology Partner Program Portal Hikvision will also introduce its new Technology Partner Program Portal at the show. The TPP Portal is designed to bring together technology partners and systems integrators, in order to accelerate projects, enhance collaboration and drive the development of more innovative customer solutions. It will provide partner listings, easy engagement with Hikvision’s integration department, comprehensive technical documentation, management of Hikvision Embedded Open Program (HEOP) including license management, and regular updates and increased functionality. Pyronix will be launching a new addition to their all-round perimeter protection solution Intruder alarm specialist Pyronix, part of the Hikvision group of companies, will be present on the Hikvision stand during IFSEC International. Pyronix will be launching a new addition to their all-round perimeter protection solution, adding even greater functionality for additional peace of mind and greater upsell and retention advantages for installers. Hikvision partners on the stand Other Hikvision Technology Partners will also be present on the Hikvision stand, including: Manything Pro will be showcasing their offsite cloud video storage platform and showing how easy it is to add cloud to Hikvision camera installations. Manything Pro cloud storage plans start from £3.19/month, allowing installers and integrators to add margin and introduce a new recurring revenue stream to their businesses. IPS Intelligent Video Analytics will show five camera-based analytics modules for the HEOP. They enable indoor and outdoor real-time detection of motion, intrusion, sabotage and loitering. Seagate will be showcasing Seagate SkyHawk Health Management, with embedded drive monitoring software designed for prevention, intervention, and recovery. Now integrated with Hikvision NVR Plus receive notification alerts from the SkyHawk HDD directly to the Hik-Connect app. Visit Hikvision during IFSEC International 2019 at Stand IF1530. Stop by the stand for 15 minutes daily talks on hot industry topics: 12.00: Dive Into Deep Learning 13.00: HikCentral MasterClass 14:00: Pyronix Powering Business Growth
Exhibiting alongside their parent company Hikvision for the third time, Pyronix will be hosting new and existing customers at IFSEC International, UK and Europe’s leading security event and one of the biggest exhibitions in the security industry. Since IFSEC 2018, they have been listening to customer feedback; refining their product portfolio by developing advanced features and exciting new updates. Securing perimeter with XD detectors Securing a property’s perimeter can be one of the most effective ways to prevent intrusion. Pyronix has now taken that one step further. Pyronix will be demonstrating how to set up a secure perimeter with XD detectors, indoor and outdoor Wi-Fi camerasOn their stand, they’ll be demonstrating how to set up a secure perimeter with their XD detectors, indoor and outdoor Wi-Fi cameras, security control panels and the updated ProControl+ app; all soon to be made even more flexible! This year they’ll also be showcasing something very exciting at the show; adding even greater functionality to their all-rounded perimeter protection solution, for additional peace of mind and greater upsell and retention advantages for their installers. Bolstering the business of installers “We’re really excited to be showcasing their latest technology at IFSEC 2019,” Pyronix Marketing Manager, Laurence Kenny, said. He continued: “Our focus this year has been about developing a product and service offering that our installers can use to bolster their business growth. Our complete perimeter protection solution and video integration adds new dimensions and service offerings to the market, so we’re thrilled to be showing these new features at IFSEC.” To find out more about the launch and see their perimeter protection solutions in action, visit Pyronix on Stand IF1530.
A blind spot in governance, risk and complianceDownload
H.265 High Efficiency Coding: Video compression for security applicationsDownload
How to overcome the storage challenges of adopting surveillance AIDownload
- FERMAX launches MEET IP system providing ease of installation and integration with automation systems
- Safer Scotland enhances security at a West Lothian site with canine capability to deter intruders
- HENSOLDT’s TRS-3D naval radar and MSSR 2000 IIFF system delivered to Norwegian Coast Guard
- BIRD Aerosystems to offer high-tech Airborne Missile Protection Systems (AMPS) to the UN Air Operations