GSM Transmission Intruder Alarm(13)
The PIMA GSM-100™ is a tri-band GSM module, which integrates fully with PIMA’s control panels - a full-data transmitter that supports most popular Central Monitoring Stations (CMS) protocols. Integrated GSM module (installed in the same box as the control panel) Easy and simple installation: Just plug it to the panel and it is set for operation Does not require phone line and thus requires no special settings and adjustments Fully programmed via the alarm system keypad, locally or remotely via a windows based download software, or via a fast programmer tool Full-Data Reporting Tri-band engine, suitable almost anywhere in the worldThe unit is highly suitable as backup to a regular PSTN line communicator, in building & construction plants where a PSTN line is unavailable or as the main communicator with boats in marinas, holiday homes, etc. where leasing a PSTN line is unwarranted.In addition, the GSM-100™ presents a number of opportunities for Central Monitoring Stations (CMS), as the GSM module sends short messages via voice channel requiring no additional CMS hardware, with low operational costs and vast coverage with the GSM network.Add to Compare
Do you have valuable stock on your premises? Is your building out of public sight? Do you want the police to respond as fast as possible if your premises are broken into? How long would it take your business to recover following a break-in?Just because you have an alarm system installed, it doesn't mean you're fully protected. BT Redcare GSM doubly protects because it uses two secure signalling paths to your alarm receiving centre. If either is tampered with by an intruder, or is faulty, the alarm receiving centre will be alerted and the relevant emergency services, or your authorised key holder, will be called.BT Redcare GSM uses the security of a BT phone line with the added protection of a GSM radio back-up path. If either is interfered with by an intruder, the other continues to monitor for any further alarms and transmits them as ‘confirmed activations' - extra confirmation that an intruder is on the premises and that the alarm isn't false. A ‘confirmed activation' attracts immediate response from the emergency services. BT Redcare GSM is ideal for all commercials risks and homes needing the highest level of security.BT Redcare GSM - maximum protection recommended by insurersHighly secure alarm signalling that provides double protection against all risksUses the BT Redcare secure networkAlerts the alarm receiving centre within secondsWorks for you every second of the day, 365 days of the yearWorks on existing BT telephone lineNo call charges to pay for on the signals sent via the phone line or radio pathNo additional cost for a new phone lineAdd to Compare
Browse Intruder Alarms: Communicators & Communication Systems
Intruder alarm communicator products updated recently
There’s only so much a corporation can do to counteract the threat of a major incident. You can ask everyone to be vigilant and to report anything suspicious, but you cannot stop someone intent on deliberately starting a fire, threatening a work colleague with a knife or something much worse. And of course, most businesses recognise that even routine events – such as burst pipes, IT system failures, extreme weather event or power outages – can have significant consequences unless they are quickly brought under control. Training security officers Governments and organisations across the world are increasingly encouraging businesses to re-assess risks and to plan for and conduct drills for major emergencies. This is driving different agencies and companies to invest in new skills, resources and systems, and encouraging businesses to routinely re-evaluate their emergency response strategies. UK police forces are increasingly training security officers in the public and private sectors on how best to react to potential terrorist incidents For example: UK police forces are increasingly training security officers in the public and private sectors on how best to react to potential terrorist incidents, as part of the UK government’s Action Counter Terrorism programme. And organisations including the Association of University Chief Security Officers (AUCSO) and Higher Education Business Continuity Network (HEBCoN) are developing customised training for their members to improve their own response and business continuity plans. Mass notifications systems Whether an organisation is facing a terrorist attack or a severe weather event, follow up reports consistently identify that the same types of challenges are common to all crisis situations, with similar errors often occurring again and again. Typically, these are centred on three key areas: poor communications, fractured command and control structures, and delayed deployment of resources. Communications skills and technologies clearly play a pivotal role in how effective an organisation is in responding to major incidents, particularly when it comes to assessing the situation and its implications, moving people towards safety and providing updates as an incident unfolds. However, when an organisation is considering its technology options, emergency response and mass notification systems (MNS) are often touted as the ideal platform to deliver all the required critical communications and ongoing updates. UK police forces are increasingly training security officers in the public and private sectors on how best to react to potential terrorist incidents Emergency notification system All the incident reporting, command and control, and communications functions have been brought together on a single platform But, if an organisation does not know exactly where all its staff or students are, and it cannot see the location and availability of its first responders and other emergency coordinators relative to them and the incident, then how useful is it to send a top-down alert to everyone? And what about fast moving or multi-centre incidents, where previously agreed evacuation procedures, recommended actions or mustering points may need to change if an incident takes an unexpected turn? Many organisations may have been lulled into believing that an emergency notification system will allow them to confidently handle all the communications aspects of virtually any crisis. In reality, too many businesses are still unaware that there are now much more sophisticated and proven technologies where all the incident reporting, command and control, and communications functions have been brought together on a single platform. Using live map tracking The benefit of using these advanced and more integrated approaches – often categorised as mobile distributed command and control systems – is that they enable faster and better decision making in a crisis using real-time feedback and two-way dialogue with those closest to the emergency. And they avoid the risks of any potential delays, miscommunications or mistakes that can happen when an organisation is under pressure to respond and often switching between multiple systems. Leading universities and multi-national corporations are already using new mobile/web-enabled platforms to improve their incident response These next generation emergency management platforms have been specifically designed to enable real-time mapping of an organisation’s security assets and its users on a single screen and to fully integrate it with a highly targeted geo-fenced notification capability. The mass notification aspect of the system can then be used to advise specific groups on the best actions to take at their location as an incident develops. The use of live map tracking enables real time mapping of an organisation's security assets Segmented messaging Many leading universities and multi-national corporations are already using these new mobile/web-enabled platforms to plan, manage and improve their incident response, leading to 50% faster reactions and more positive outcomes.During a crisis, users can receive push notifications so the security centre can immediately see their exact location and advise them accordingly The systems have been widely adopted within the higher-education sector, but they are equally applicable to any large company with multiple international sites or those situated in research or corporate campuses where the bulk of assets and people are based in one or more key locations. Typically, systems provide users with a smartphone app that they can use to call for immediate emergency or first aid support when at work, or to report something suspicious which could prevent an apparently minor incident from escalating into a full-scale emergency. During a crisis, users can receive push notifications, SMS and E-mails asking them to open the app if they are not already logged in, so the security centre can immediately see their exact location and advise them accordingly. Supporting dispersed mustering Now that communications can be more nimble, responsive and flexible this can support the increasing numbers of planners are recognising the advantages of dispersed mustering. This is a strategy that has been developed to reduce the risk of secondary attacks on unprotected people complying with instructions to evacuate from premises and gather in what are, effectively, exposed locations. It is now acknowledged that evacuees waiting outside for any length of time are more vulnerable to targeted attacks or to injury, from flying glass for example. With dispersed mustering – a strategy made more effective by these new mobile distributed command and control systems - a building’s occupants can be advised not to go outside, but to move to known safe internal locations. People in each specific area can then be kept regularly updated. Many corporations are now using new mobile/web-enabled platforms to improve their incident response Coordination between response agencies The software platforms can be integrated with an organisation’s fixed security infrastructure to take real-time sharing of information First responders are permanently logged in, so the emergency operations centre can see their exact locations in real-time and can advise what actions to take in mustering people or in setting up and protecting security cordons. Bringing everything together on one platform, with real-time feedback and in a fully integrated system also removes what is often seen as the weakest communication link in managing any major incident: the need to rely on conventional two-way radio as the sole means of communication between the command and control centre and its first responders and other team members on the ground. The software platforms can be integrated with an organisation’s fixed security infrastructure to take real-time sharing of information to a new level for improved collaboration, coordination and communications between users, the incident management team and external agencies. Improving emergency response strategies One of the most powerful features of some of these new systems is the ability to record and view all alerts, responses and the detailed conversations between first responders, emergency coordinators and other parties. This allows the systems to be used to simulate major incidents involving inputs from the emergency services and other key agencies and to ensure the organisation’s crisis management plans have been fully tested against a range of possible incident scenarios.
As we approach National Safe Schools Week (October 21-27), it is appropriate for a conversation to begin regarding establishing standards for K12 school security. Currently no standards exist for assisting schools navigate the complexity of understanding what they need, how much it will cost and how they will secure their learning environments. Security industry experts The Partner Alliance for Safer Schools (PASS) is one of the organisations at the forefront of establishing security standards for schools. In 2014, the Security Industry Association (SIA) and the National Systems Contractors Association (NSCA) formed PASS, which brought together a cross functional group of members including school officials, safe schools’ consultants, law enforcement and security industry experts to collaborate and develop a coordinated approach to protecting K-12 students and staff. School administrators are often contacted repeatedly by organisations with multiple safety and security products PASS has provided valuable insights regarding an ‘All Hazards’ approach to school safety and security. In fact, PASS suggests that school administrators are challenged with two decisions: Determining what they need to do How to prioritise Safe school environment School administrators are experts in running schools and providing education. However, most are not security experts and do not understand the complexity of implementing a comprehensive physical security and safety program across their districts. Still, they are often contacted repeatedly by organisations with multiple safety and security products. School administrators are experts in running schools and providing education, but most are not security experts Some of these organisations recognise their products are just pieces of a safe school environment puzzle and how they fit in, whereas others focus on specific applications and do not understand how their specific solutions may affect life safety codes and Americans with Disabilities Act law. (Note: Many ‘barricade devices’ fall into this latter category and actually introduce liability concerns with the unintended consequences of their use.)Schools incorporate evacuation drills as part of their emergency preparedness plans and practice on a regular basis Even for experts, the plethora of options and disparate systems required to integrate a safety and security approach at schools is daunting. The ongoing challenge is integrating access control, video, mass notification, and/or visitor management products into a single, effective, and appropriate system the owner can understand, utilise, and afford and that meet local codes and ADA laws. In the absence of standards, schools are likely to amass a collection of devices that do not constitute a comprehensive solution. Lack of consensus In years past, the our industry and commercial buildings adhered to legacy codes – like Building Officials and Code Administrators International Inc. (BOCA), Uniform Building Code (UBC), Southern Building Code Congress International Inc. (SBBCI), and International Conference of Building Officials (ICBO) – which have traditionally been revised every three years, while local jurisdictions decided what versions to adopt and enforce. Currently, however, there is a move toward the International Building Code (IBC), which is published by the International Code Council (ICC) and includes standards and guidance for commercial buildings on doors, windows, and other openings.A risk assessment is the next step toward developing a comprehensive security plan, and begins with developing a trend analysis Still, despite this migration of codes from a patchwork of local decisions to global guidelines, there remains a lack of consensus around school security. The current fragmented approach causes confusion regarding how new schools are designed and how to retrofit existing school buildings, whose average age is 45+ years. Right protection equipment One can point to the fact that there hasn’t been one student lost in a school fire in over 50 years as testament to standards like NFPA 80 and NFPA 101 being referenced in model building codes. Additionally, schools incorporate evacuation drills as part of their emergency preparedness plans and practice on a regular basis. It’s not just having the right protection equipment in the building, it’s also having a procedural layer in place to make sure everyone knows their roles and responsibilities in the event of fire. The stress of the actual event can limit ones’ ability to think clearly. Practice makes perfect. Why would we approach school security any differently? School security is a team effort, and it is important to understand all the areas security impacts and involves School security is a team effort. It is important to understand all the areas security impacts and involves. PASS suggests starting with a basic team consisting of: Security Director Local Law Enforcement School Administrator Integrator Door and Hardware Consultant IT Director Comprehensive security plan Quantifying and mitigating risk are the jobs of security professionals and school administrators A risk assessment is the next step toward developing a comprehensive security plan. This often begins with conducting a trend analysis requiring the collection of data from a variety of public and private sources. The challenge is to pull these pieces into a usable and easily understood format that provides a guide for current and future risk concerns. Risk assessment and mitigation can never eliminate risk. Quantifying and mitigating risk are the jobs of security professionals and school administrators. Data from the following sources can help measure risk: Campus: Review incident report trends for at least the past 36 months. Area and city: Review crime data from local law enforcement for the surrounding neighborhood and city. Screening procedures: How is hiring conducted? Anonymous tip reporting systems: Enabling students, staff members, parents and the community to anonymously alert administrators to perceived and actual threats. Social media monitoring: such monitoring can provide important information that can be used to identify risks. Monitoring social media could help measure risk for school safety Delay adversarial behaviors These assessments can then be incorporated into the best practice approach of Layered Security. Layered security combines best practice components within each layer that effectively deter, detect and delay adversarial behaviors. Layered security works from the outside in. As one layer is bypassed, another layer provides an additional level of protection. The asset being protected is at the center of the layers – students, staff and authorised visitors. PASS defines five layers of Security:As one layer is bypassed, another layer provides an additional level of protection District Wide Property Perimeter Parking Lot Perimeter Building Perimeter Classroom/Interior Perimeter Appropriate Tier target Each layer can be broken down into Tier levels with Tier 1 being basic and Tier 4 being the highest level of security (Figure 1) . It is important to understand that the demographics of individual school buildings varies, even within the same district. Security experts will quickly point out that ‘if you’ve seen one school, you’ve seen one school’. The assessments will determine the appropriate Tier target. Figure 1 Each layer includes essential protective elements, or components, of security. Every layer does not necessarily include all seven of these common components, and a layer may include additional components unique to that particular layer. Safety and security components Policies & Procedures People (roles & training) Architectural Communication Access Control Video Surveillance Detection and Alarms While components are not listed in a priority order, three components included in all layers are policies and procedures, the roles and training of people, and communication. These components often perform a function in every layer and every tier in each layer. Three tools come together in the PASS approach as outlined in the new 4th Edition of the PASS Guidelines (Figure 2) - the Layers are established and defined, a Checklist/Assessment breaks down each layer into tiered best practices which then tie into the guidelines where a narrative explains each best practice in more detail. Figure 2 Schools need not reinvent the wheel when it comes to school security planning. Following the best practices of Risk Assessments and Layered Security will ensure that every school building in a district will have a unique and comprehensive plan that is tailored to their individual needs.
Most technology companies have one goal in mind: to provide customers with high-quality, affordable products that can efficiently help streamline operations. Whether it's surveillance cameras, video management software, access control technology or any other type of security device, today's leading organisations invest in expertise in these product segments and strive to produce the highest quality solutions. To effectively fulfill this task, technology providers are always searching for emerging components to make their products and services even stronger. Oftentimes, a key aspect necessary to build a comprehensively robust solution involves finding like-minded partners that share a common goal and are willing to work together to create an integration that increases insight and intelligence.The interoperability between systems, devices and different types of applications should be intuitive and fast Key factors for security integrations A basic factor in a partnership is openness. For an integration to perform seamlessly for the end user, the platform through which the technologies converge must follow standard protocols, easily operate with other platforms, allow freedom and customisation, and provide adaptability. The interoperability between systems, devices and different types of applications should be intuitive and fast, enabling more time to be spent on analysing critical data and responding to security events. The puzzle of a complete security solution contains many pieces, and it's often necessary to fuse together aspects from various providers to create a best-in-breed technology offering. When organisations collaborate, the end result is a simplified solution with an increased level of value. As threats become more severe and complex, customers demand solutions that combine different security and business elements into a single interface that can address a wide variety of risks. A unified security system requires a strong collaboration between technology providers and integrated solutions Interconnected security devices Users used to only look at specific security devices - such as cameras or door alarms - as each having a strong, autonomous purpose, but now, every device plays an important interconnected role. And the progression of the Internet of Things (IoT) has made this transition even easier, as maintaining a consistent and uniform communication and interconnectivity between devices has now become the norm. The IoT has also made it so that partnerships must not only exist between manufacturers, but also within the customer's organisational structure. Although exceptionally beneficial, the IoT brings with it an increased amount of cyber vulnerabilities. As security systems are networked to increase flexibility, the door is opened to a number of potential threats that could compromise the entire enterprise. This risk highlights the need for an internal partnership and knowledge sharing between a company's physical security professionals and its IT team. IT experts should be pulled into security decisions and positioned as collaborative partners to assist with software updates, data safety protocols and solving complex network challenges, ultimately leading to a more cyber secure solution.Partnerships are beneficial to both the companies involved and their customers Knowledge sharing and learning Aside from cybersecurity, the latest prominent security attacks and events have focused primarily on soft targets, such as schools, concerts or shopping malls. This has caused many technology providers to venture into different vertical markets, and strong partnerships streamline this crossover. Innovators can extend their geographic reach and purpose through integrations with other like-minded manufacturers or integrators to add new levels of functionalities. Of course, a partnership cannot operate properly and to the best of its ability without a core component: learning. In today's evolving business and risk environment, knowledge is critical. A shared knowledge base can open up new opportunities and lead to the strengthening of security across many levels. A truly powerful, unified security system requires a strong collaboration between technology providers and integrated solutions. Partnerships are beneficial to both the companies involved and their customers, and the results created through these alliances can reach far beyond a user's expectations, offering enhanced flexibility and extensive safety options.
Is your access control as effective as you think?Download
How to get buy-in from IT departments on IP video installationsDownload
The role of IT in physical access controlDownload
- Hikvision security cameras and advanced video tech installed at wild bar-headed goose hotspots in China
- 360 Vision Technology’s high-performance Predator and Invictus HD PTZ cameras secure Pope Francis visit to Ireland
- Knightscope to beta test suite of developing technologies at Clovis Unified School District
- CriticalArc’s SafeZone indoor positioning solution installed at Texas A&M University