How’s this for a simple access control scenario? You walk up to a door, wave your hand in front of a button, the button lights up, and the door opens. That’s the simplified user experience that startup Openpath is promoting as it enters the crowded and mature market for physical access control.

Openpath says a simple user experience provides the extra boost needed for mobile credentialing to gain momentum. In this case, it’s even simpler than using a card credential (no searching in a bag or purse for the card). And there’s no personal identification number (PIN) code to remember; no “intrusive” biometric element that can concern some users. James Segil, President and Co-Founder of Openpath, says the simplified process “uses fewer thought cycles.”

Reliability of the system comes from Openpath’s SurePath triple-connect technology

We wanted to make mobile access control that people want to use and can use safely and with ease,” he says. “We wanted to make using a smart phone for access control easier and more reliable than using a keycard.

Simplified user operation

In the simplified scenario, the mobile credential resides on a smart phone that can remain tucked away in the user’s purse or pocket. The credential remains active without the user needing to open an app. The wave of the hand signals intent, which causes the button to light up, activate and the door is ready to open. Segil says the simplicity of operation has contributed to the system seeing an unheard-of 94% adoption rate among users.

Reliability of the system comes from Openpath’s SurePath triple-connect technology. The smart phone credential is delivered using Bluetooth, WiFi or LTE (cellular) – whichever signal reaches the reader first enables the door to be opened. So even if a company’s WiFi is down or Bluetooth proves unreliable, there is still a third option.

Cloud software simplifies operation for both tenants and landlords
Openpath deploys “seamless” cloud integration and makes it easy for landlords and tenants to integrate Openpath with other systems

Seamless cloud integration

Segil is a serial entrepreneur who has had experiences as a frustrated user, dealing with many different offices, people and access control deployments over the years – subletting office space, changing PIN codes, dealing with 10 different offices using 10 different cards. Based on that experience, Openpath’s founders saw a need for a more user-centric approach to access control, and a chance to improve the office experience to be more aligned with employees’ experiences in their smart homes.

Segil says he also saw “significant lethargy” among incumbent players in the access control space, and a market in which mobile and cloud technologies had still not taken hold. In addition to a simplified user experience built around mobile credentialing, Openpath deploys “seamless” cloud integration and makes it easy for landlords and tenants to integrate Openpath with other systems. The “elegant” readers, including a flush-mounted version, fit in well with high-end office environments. The company launched in May 2018.

Openpath has been signing up national and regional channel partners all across the U.S.

Openpath is focused on the commercial real estate market, where they have already seen significant adoptions, especially among mid-sized companies. Larger deployments as part of new construction are in the pipeline.

National system integration

In the past six months since its launch, Openpath has been signing up national and regional channel partners all across the U.S. and now has a nationwide footprint and is able to service customers all over the U.S. They are not yet disclosing any specifics about the number of partners they have signed up and who they are. “I can share that we have a number of large national system integration and security brands on board as channel partners and many more regional and local system integrators,” says Segil. They are looking for additional integrator partners. “There is a cohort of folks out there who say ‘I get it,’ and I want to offer it to my customers,” says Segil. The cloud element of the system can provide recurring monthly revenue (RMR).

Openpath’s system offers flexibility in terms of meeting each customer’s security needs. In addition to the “super convenient” scenario described above, the system can also be configured to be “super secure,” using two-factor authentication and other measures, says Segil. There are multiple “flavors” between the two extremes. It can also be integrated with elevators to enable the buttons on allowed floors.

Integration with existing systems

Cloud software simplifies operation for both tenants and landlords. The system is backwards-compatible to existing systems and can be used to retrofit and mobile-enable a legacy system, providing the benefits of mobile features and cloud operation to multiple sites. The software can interface with enterprise applications such as Active Directory, and an application programming interface (API) facilitates integration with other systems and building components. It operates with marketing automation platforms such as Flack and visitor management systems such as Envoy.

The Openpath system consists of single or four-door panels wired using standard ports, Wiegand ports and REX ports, each connected to software in the cloud
The system is backwards-compatible, providing the benefits of mobile features and cloud operation to multiple sites

Open standards make the system easy to install in new or existing buildings using RS485, or Cat 5 or Cat 6 wiring, whatever is in place. Retrofit installations can use existing panels, servers, software, etc., or they can be replaced. The Openpath panel is installed right next to an existing panel in a retrofit and preserves all legacy integrations of the previous system.

Access credentials compatibility

In its simplest configuration, the Openpath system consists of single or four-door panels wired using standard ports, Wiegand ports and REX ports, each connected to software in the cloud. Each panel works offline if the internet connection is down. Various key fobs, cards and other credentials are available in addition to mobile credentials.

Openpath was one of the new exhibitors at last fall’s GSX show in Las Vegas, occupying a large-sized booth for a startup company. The “beautiful” hardware drew a lot of attention, says Segil. “The channel loves us, and we signed a lot of people,” he adds. “We were excited by the response.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

Author profile

Larry Anderson Editor, SecurityInformed.com & SourceSecurity.com

An experienced journalist and long-time presence in the US security industry, Larry is SourceSecurity.com's eyes and ears in the fast-changing security marketplace, attending industry and corporate events, interviewing security leaders and contributing original editorial content to the site. He leads SourceSecurity.com's team of dedicated editorial and content professionals, guiding the "editorial roadmap" to ensure the site provides the most relevant content for security professionals.

In case you missed it

Which technologies will disrupt the security industry in the second half of 2020?
Which technologies will disrupt the security industry in the second half of 2020?

The first half of 2020 has been full of surprises, to say the least, and many of them directly impacted the physical security market. The COVID-19 pandemic created endless new challenges, and the physical security market has done our part to meet those challenges by adapting technology solutions such as thermal cameras and access control systems. In the second half of 2020, we can all hope for a return to normalcy, even if it is a “new normal.” In any case, technology will continue to play a big role. We asked this week’s Expert Panel Roundtable: Which technologies have the greatest potential to disrupt the security industry in the second half of 2020?

What do you need to know about thermal imaging cameras?
What do you need to know about thermal imaging cameras?

As businesses, schools, hospitals and sporting venues look to safely reopen in a COVID-19 world, thermal imaging systems will play a critical role in helping to detect and distinguish skin temperature variations in people. Thermal surveillance, a mainstay of traditional physical security and outdoor perimeter detection, is now being deployed to quickly scan employees, contractors and visitors as part of a first line of defense to detect COVID-19 symptoms. In the coming weeks and months, the security industry will look to implement thermal camera solutions for customers, yet many questions remain as to the differences between different system types and how to properly install thermal imaging cameras. In this Q&A, Jason Ouellette, Head of Technology Business Development for Johnson Controls, answers several of these questions. Q: What are some of the different thermal imaging solutions available in the market to detect an elevated temperature in a person? For the general market, there are three types of these thermographic screenings. There is the handheld device, which is typically lower cost, very portable, and very easy to use. Typically, this is a point and shoot type of device, but it requires you to be three feet or less from the person that you're screening, which, in today's world, means the user needs to wear protective personal equipment. For the general market, there are three types of these thermographic screenings The second type of solution would best be described as a thermal camera and kiosk. The advantage of this system over a handheld device is this can be self-service. An individual would go up to and engage with the kiosk on their own. But many of these kiosk type solutions have some integration capability, so they can provide some type of output, for either turnstiles, or physical access control, but not video management systems (VMS). Some of the downside of this type of system is that it’s less accurate than a thermographic solution because it does not have a blackbody temperature calibration device and the readings are influenced by the surrounding ambient temperature, called thermal drift. So instead of being able to achieve a ±0.3ºC accuracy rating, this system probably provides closer to ±0.5ºC at best. Some of these devices may be classed as a clinical thermometer with a higher degree of one time accuracy, but do not offer the speed and endurance of the thermographic solution for adjunctive use. And then there are thermal imaging camera systems with a blackbody temperature calibration device. These types of systems include a dual sensor camera, that has a visual sensor and a thermal sensor built right into the camera, along with a separate blackbody device. This provides the highest degree of ongoing accuracy, because of the blackbody and its ability to provide continuous calibration. These systems can provide much more flexibility and can offer integrations with multiple VMS platforms and access control devices. Q: When installing a thermal imaging camera system what is the most important element to consider? Camera placement is critical to ensure the system works as expected, however the placement of the blackbody device which verifies the correct calibration is in place is equally as important. If the customer wants to follow FDA medical device recommendations for camera placement, both the height of the camera and the blackbody as well as the distance between these devices should comply with the product installation instructions. This takes into account the device focal range and calibration parameters in addressing the distance from the person undergoing the scan. Also, integrators should minimise camera detection angles to ensure optimal accuracy and install cameras parallel with the face as much as possible, and again in compliance with installation instructions. Integrators should minimise camera detection angles to ensure optimal accuracy The blackbody should be placed outside of the area where people could block the device and located more towards the edges of the field-of-view of the camera. You need to keep in mind the minimum resolution for effective thermographic readings which is 320 by 240 pixels as defined by the standards. To achieve this, you would need to follow medical electrical equipment performance standards driven by IEC 80601-2-59:2017 for human temperature scanning and FDA guidelines. Within that measurement, the face needs to fill 240 x 180 pixels of the thermal sensor resolution, which is close to or just over 50 percent of the sensor’s viewing area typically, meaning a single person scanned at a time in compliance with the standards for accuracy.  Along with height and distance placement considerations, the actual placement in terms of the location of the system is key. For example, an expansive glass entryway may impact accuracy due to sunlight exposure. Installations should be focused on ensuring that they are away from airflow, heating and cooling sources, located approximately 16 feet from entry ways and in as consistent of an ambient temperature as possible between 50°F and 95°F. Q: Once a thermal imaging camera system is installed, how do you monitor the device? There are several choices for system monitoring, depending on whether the solution is used as standalone or integrated with other technologies, such as intrusion detection, access control or video systems. For standalone systems, the ability to receive system alerts is typically configured through the camera’s webpage interface, and the cameras include abilities such as the live web page, LED display for alerting, audio alerts and physical relay outputs. When done right, these features will all follow cybersecurity best practices which is important for any network solution today, including changing default passwords and establishing authentication methods. The ability to receive system alerts is typically configured through the camera’s webpage interface These types of thermal cameras can also integrate with turnstile systems, VMS platforms and access control systems. This is typically done through the integration of a relay output, activated by a triggered temperature anomaly event on a thermal imaging camera which can then be used for activities such as locking a turnstile, or through access control and video systems to send an email or provide an automated contagion report for contact tracing. These capabilities and integrations extend the monitoring capability above that of the standalone solution. The camera can be configured to monitor a specific range of low and high alerts. Users can determine the actions that should be taken when that alert exceeds the preset low or high threshold. These actions include things like a bright and easy-to-see LED can provide visual notification through pulsing and flashing lights as an example. Q: What about system maintenance? Does a thermal imaging camera require regular service in order to operate accurately? First it’s important to make sure the system is calibrated. This can be done after the unit stabilises for at least 30 minutes to establish the initial reference temperature source known as the blackbody. Calibrations conducted before this warm up and stability time period can throw off accuracy. Also, as part of your system maintenance schedule you will want to perform a calibration check of the blackbody device every 12 months, along with following recommendations of the FDA and IEC. If you install the solution and don’t perform maintenance and the blackbody calibration certificate expires, over time there’s a risk that the device will experience drift and a less accurate reading will result. There’s a risk that the device will experience drift and a less accurate reading will result Q: What final pieces of advice do you have for either an integrator who plans to install a thermal imaging camera system or an end user who plans to invest in this solution? Before you buy a thermal imaging camera check to see if the manufacturer ships the camera with a calibration certificate. Also, become familiar with FDA’s guidance released in April 2020, Enforcement Policy for Telethermographic Systems During the Coronavirus Disease 2019 (COVID-19) Public Health Emergency. This document places thermal/fever products for adjunctive use under the category of a Class I medical devices and subject to its regulatory control. Driven by these regulations and categorisation, users need to understand specifically what is required to meet the required level of accuracy for successful detection. While thermal imaging camera systems are more complex than traditional surveillance cameras, they can prove to be a valuable resource when set up, configured and maintained properly.

Recognising the importance of security officers to promote safety
Recognising the importance of security officers to promote safety

The general public doesn’t give much thought to the important role of security officers in creating and promoting safer environments. The low-profile work of security officers is vital to protecting people, places and property. During the pandemic, newer aspects to that role have emerged. Security personnel have been called on to perform diverse tasks such as managing queues at the supermarket, safeguarding testing centres and hospitals, ensuring food deliveries, and supporting police patrols. The British Security Industry Association (BSIA) and two other organisations in the United Kingdom are joining forces to raise awareness of the work of security officers and to recognise the vital importance of the duties they perform. BSIA, a trade association, includes members who are responsible for 70% of privately provided UK security products and services, including security guarding, consultancy services, and distribution and installation of electronic and physical security equipment. BSIA, the Security Institute and the Security Commonwealth Joining BSIA in the awareness campaign are the Security Institute, a professional security membership body; and the Security Commonwealth, which is comprised of 40 organisations from across the security landscape with common objectives to build professionalism, raise standards and share best practices. “The recognition of security officers as key workers is the start of a re-appraisal of what service they provide to the community in keeping the public safe and secure,” says Mike Reddington, BSIA Chief Executive. “As we exit lockdown and have to navigate public spaces again, [security officers] will have a crucial role in supporting public confidence. We are working closely with the Police and all other public bodies to find the best way to achieve this.” Security officers acknowledged as key workers The campaign will showcase security professionals as a respected, valued, professional service provider and a key worker that is acknowledged and embedded in daily lives. The British Security Industry Association (BSIA) and two other organisations in the United Kingdom are joining forces to raise awareness of the work of security officers “Great effort has been invested in the professional standards and capabilities of frontline [security] officers, and they have proven their worth during the coronavirus crisis in the UK,” says Rick Mounfield, Chief Executive, the Security Institute. “They, along with the wider security sector, deserve to be recognized, respected and appreciated for the safety and security they provide across the United Kingdom.” “[We are working to] build professionalism, raise standards and share best practices, and I hope this campaign can make more people recognise the changes we have all made and continue to make,” says Guy Matthias, Chairman of the Security Commonwealth (SyCom). The industry will be reaching out to companies, professionals, and organisations in the sector to participate in the campaign. The hope is that, over the coming weeks as lockdown is eased, the industry can play its part to ensure that the country emerges with confidence to start to recover and build for the future. Private security more important than ever The campaign will showcase security professionals as a respected, valued, professional service provider Across the pond in the United States, law enforcement professionals are facing a crisis of confidence during a time of civil unrest as protestors call to “defund the police” and to otherwise undermine and/or recast law enforcement’s role in preserving the peace and ensuring public safety. If an upshot is that public policing is starved of resources, the role of private security to supplement their mission is likely to increase. In short, the role of private security is more important than ever on both sides of the Atlantic. Public recognition of that role is welcome, obviously. In any case, the importance of their role protecting people, places and property has never been greater.