One of the greatest challenges that indoor and outdoor security surveillance solutions face is lack of light. However, obtaining the proper amount of illumination for security goes beyond merely flooding a specific area with light.

Without an adequate lighting source, video cameras are ineffective. When capturing only dark, blurry images and video, they can quickly become worthless to security staff or law enforcement personnel. On the other hand, too much of the wrong type of light can create issues like ‘hot spots’ and overheating, which can diminish crucial details and eventually cause irreversible camera damage.

Fortunately, there has been a recent global shift that is sending users away from the old incandescent and fluorescent bulbs, and toward LED lighting. Regardless of the type of CCTV application, there are an abundance of reasons to stop using alternative types of illumination. Here are 3 of the most substantial.

1. Better illumination and clarity

You would think it would be common knowledge by now that cameras need light to see, and well-lit areas provide less cover for criminals to commit crimes. However, it is still somewhat commonplace to have sites where either not enough lighting or the wrong kind of lighting is implemented. Increasing the quality of illumination in an area has the ability to deter crime, make other accompanying safety devices perform better and even improve the accuracy of video analytics.

LED lamps are currently the
only security lighting option
that possesses a multitude
of point sources, making it
possible to  aim your light

Integrators need a lighting solution that consistently performs, and when it comes to supplying the best operation, price, and durability; external LED lighting is the only choice.

One particular aspect of external LED lighting that makes optimum illumination possible is the strategic uniformity of its design. External LED lamps are currently the only security lighting option that possesses a multitude of point sources, making it possible to literally aim your light by situating individual diodes in a specific angle or position. This type of alignment offers a more consistent and predictable light source than anything else on the market, eliminating much of the uncertainty involved in installation. This allows you to light a larger area more effectively and efficiently with nearly zero effort.

2. Faster start-up time

Whether you are talking about protecting a utilities facility, school campus or international border, it doesn’t take long for an incident to occur. Unlike traditional HID (high intensity discharge) lights, which can take up to a half an hour to reach full competency, LED’s spark up immediately. The colder the climate of the area, the more difficulty the HID bulbs have getting started and functioning properly. Given that there are many places in the United States alone where temperatures can sit at or below single digits, it seems almost absurd to consider anything else besides LED lighting. This sizable flaw can be especially detrimental if attempting to set up any kind of crime deterring, motion detection solution.

One of the most crucial components of a sufficient response system is reaction time. Having a sluggish start up regarding any component is much like having a 15 year-old guard dog laying in your yard. By the time the security lights get up and running, the offender has already committed the crime and vacated the premises. And as dependable as the old boy may have been in the years past, he is now just too darn slow. And with an industry that is quickly moving toward more effective real-time, situational security solutions, a hesitated response is the last thing desired.

The colder the climate of the area, the more difficulty the HID bulbs have getting started
Unlike traditional HID lights, which can take up to a half an hour to reach full competency, LED’s spark up immediately

3. Increased life span and efficiency

Organisations have the opportunity to save thousands of dollars each year in energy costs, whilst increasing site security by switching to LED based illuminators. LED’s provide the lowest running cost currently available, with less than 100 watts needed for the most powerful of units. Not to mention, the majority of additional wattage needed for other types of lighting units is generally burned off in the form of unwanted heat, decreasing both quality and length of life. How much longer LED’s lasts when compared to the alternative is astounding. For example, the average life span of an incandescent bulb is about 1,000 hours; fluorescent bulbs last for around 10,000 hours, while LED’s can shine bright up an impressive 100,000 hours. That is 100 times longer without changing a bulb.

Furthermore, installing LED’s not only saves money in the form of lower energy and running costs, but also provides a very low rate of bulb malfunction or failure. This cuts down on maintenance fees as well as possible down time that could result in vulnerability. Inspections and servicing of lights alone can be very expensive and time consuming. LED’s radiate much less heat, reducing the chance of insect complications and helping prevent hot spot development, again saving you time, money and frustration at every camera site.

Enhancing overall security solution

As time goes on, the importance of strategic lighting becomes more and more evident for the security industry. The continual growth of technologically advanced video solutions (biometrics, crowd detection, motion tracking, etc.) demands a level of clarity and consistency that can only obtained through proper lighting. LED’s not only yield a lower running cost and better performance, they provide an enhanced level of control. The most important benefit of a security tool is not always how it performs independently, but how it increases the effectiveness of the overall security solution it is a part of.

Download PDF version Download PDF version

Author profile

In case you missed it

How soon will access control cards become extinct and why?
How soon will access control cards become extinct and why?

Since the advent of the physical security industry, access control has been synonymous with physical cards, whether 125 kHz ‘prox’ cards or the newer smart card alternatives. However, other credentials have also come on the scene, including biometrics and even smart phones. Some of these choices have distinct cost and security advantages over physical cards. We asked this week’s Expert Panel Roundtable: How soon will the access control card become extinct and why? 

Addressing the Internet Of Things (IoT) and challenges in device design using a comprehensive approach
Addressing the Internet Of Things (IoT) and challenges in device design using a comprehensive approach

As the number of connected devices increases worldwide, the ways that they are being used, designed, and tested have also expanded. The rise of connected devices is demanding engineers to harness the power of the internet of things, which is expected to hit 28 billion by 2025. A comprehensive approach to device design is needed more than ever to address the challenges that this rapid growth will bring. Why engineers should be using IoT technology in product design The demand for devices designed to use the Internet of Things (IoT) technology is increasing as more industries are finding expanded ways to put them into use. Industries such as healthcare, automobiles, and agriculture are becoming more dependent on cloud capabilities and are therefore in need of new devices able to connect to it. Due to this rise in demand, an increasing amount of devices are delivering a multitude of benefits both to consumers and companies. However, this new wave of products has led to a growing list of challenges for engineers as they are forced to address IoT tech in regards to connectivity, regulations, longevity, and security. Ways to use IoT in the development process Engineers are facing these new challenges along with the normal pressure of deadlines and test considerations. By approaching all of these issues from a comprehensive point-of-view, the solutions become clearer and new device capabilities can be born. Let’s look at the challenges individually as well as possible solutions for them. Improving connectivity IoT enables data to be transferred between infrastructure, the cloud, and devices, making the process smooth  Because IoT is based around connection, it’s no surprise that the primary challenge for engineers to overcome is the improvement of connectivity between devices. IoT enables data to be transferred between infrastructure, the cloud, and devices, so making this process as smooth as possible is crucial. The main challenges involved with connectivity have to do with development and product testing while meeting industry standards and best practices. Additionally, many companies lack the necessary equipment and technology to develop new IoT devices, which makes it difficult to create scalable prototypes and test new products. Suggested solutions To address the issue of not having the expertise and necessary tools for testing, we suggest outsourcing the prototyping and evaluation process instead of attempting to tackle this in-house. By doing this, you’re able to free up resources that would otherwise be needed for expensive equipment and qualified staff. Helping comply with regulations When working with devices that are connected across the world, there is a complex web of regulations and conformance standards that can lead to challenges for engineers. The necessity of complying with these regulations while also pushing to meet deadlines can be burdensome and lead to an increase in production time and expenses. Failure to comply with global and regional laws, as well as system and carrier requirements, can lead to fines and costly setbacks. This type of failure can destroy a company’s reputation on top of causing financial losses, often leading to the loss of business. Suggested solutions By testing the IoT device design and components early, engineers can address any pre-compliance issues that may arise. During the early stages of development, we suggest using scalable and automated test systems readily available in the marketplace. Improved communication with other devices New challenges arise as new devices hit the market and existing technologies are redesigned to offer a better experience In the rapidly growing number of connected devices, new challenges will arise as new devices hit the market and existing technologies are redesigned to offer a better user experience. This rapid growth in devices will lead to congested networks leading to the necessity of devices being able to function in the midst of increased traffic and interference. Failure to do this will lead to delayed responses which could prove to be fatal. Suggested solutions The best solution for this issue is found in the evaluation process and supporting test methods that the Institute of Electrical and Electronics Engineers (IEEE) published in the American National Standard for Evaluation of Wireless Coexistence (ANSI). This process addresses the interconnectivity issues present in radio frequency environments. The outlined process involves defining the environment and evaluating the wireless performance of the equipment through thorough testing. An in-depth version can be found in its entirety online. Increasing the longevity of devices IoT devices are being used in vital industries such as healthcare and automotive so battery life and power consumption are two challenges that engineers must take seriously. A failure in this area could potentially lead to loss of life or safety concerns on the road. As new firmware and software are being designed to address these factors, engineers must be implementing them into IoT devices with the ability to be continually updated. Suggested solutions Longevity should be addressed in all aspects of the design process and tested thoroughly using a wide range of currents. By doing this, an engineer can simulate consumer applications to best predict performance. Security Security and privacy are concerns with any technology, but with the use of IoT in medical devices, it’s paramount Security has been a controversial issue for IoT since its inception. Security and privacy are concerns with any technology, but with the widespread use of IoT in medical devices, smart home appliances, and access control and surveillance, it’s paramount. For example, medical devices may store information about health parameters, medications, and prescriber information. In some cases, these devices may be controlled by an app, such as a smart pacemaker, to prevent heart arrhythmias. Naturally, a security issue in these devices could be devastating. Another example of dangerous security concern is with surveillance cameras and access control, such as for home or business security systems. These intelligent door locking systems contain locks, lock access controllers, and associated devices that communicate with each other. Suspicious activities are flagged with alerts and notifications, but if a hacker gains access, it can lead to real-world, physical danger. Security design points Here are some key points for security design: Physical security: IoT devices may be in external, isolated locations that are vulnerable to attack from not only hackers but by human contact. Embedding security protection on every IoT device is expensive, but it’s important for general security and data safety. Security of data exchange: Data protection is also important because data gets transmitted from IoT devices to the gateway, then onto the cloud. With surveillance and access control information or sensitive medical information, and encryption is vital to protecting data from a breach. Cloud storage security: Similar to data exchange, the information stored in medical devices, surveillance and access control systems, and some smart appliances with payment features, must be protected. This includes encryption and device authentication through access control, which can police what resources can be accessed and used. Update: Security vulnerabilities will always occur, so the key to addressing them is having a plan to address errors and release patches. Customers should also have options to secure devices quickly and effectively. Suggested solutions Engineers can include security and protection into IoT devices with early and perpetual testing throughout the design process. Most security breaches occur at endpoints or during updates, giving engineers a starting point for how to address them. Creating more secure devices Ensuring the security of connected devices should be of supreme importance for engineers as these devices are vulnerable to security breaches. The ultimate security of devices goes beyond the scope of engineering as the network and enterprise levels must also be secure to protect against potential threats. However, engineers play a role in this protection as well and should consider device security in the design process. Suggested solutions On a device level, engineers can help protect IoT devices from vulnerabilities by implementing early testing and continuing it throughout the design process. Most security transgressions occur at endpoints so this continual testing can, and should, create barriers to breaches. Regulations and compliance For IoT engineers, the complex web of regulations and compliance standards present new challenges Regulations and compliance surrounding data and technology are nothing new, but for IoT engineers, the complex web of regulations and compliance standards present new challenges. Engineers are already addressing obstacles in security and connectivity, all while meeting deadlines, and working around regulations adds time and expense to the process. Unfortunately, a failure to comply with global, regional, or local laws can lead to setbacks and fines. In addition to time lost in production and possible fines, the damage to a company’s reputation can lead to even more losses. Suggested solutions Compliance should be considered early and often in the design process. In the early stages of development, the IoT device or components can be tested to address and compliance issues. If possible, use a scalable and automated test system. The comprehensive solution As we stare at an uncertain future full of possibilities, it’s clear to see that new challenges will continue to be presented as technology evolves and new innovative devices are designed by engineers. By addressing these issues early and often, solutions can be implemented and problems prevented before they even have a chance to occur thanks to sound engineering and solid design.

Everbridge provides the critical event management platform to help organisations manage the full lifecycle of a crisis
Everbridge provides the critical event management platform to help organisations manage the full lifecycle of a crisis

The UK Government is consulting on plans to introduce a new law requiring operators of public spaces to consider the risk of a terrorist attack and take proportionate and reasonable measures to prepare for and protect the public from such an attack. Under the proposals outlined in the consultation document, those responsible for a publicly accessible location will have a ‘protect duty.’ The protect duty would apply to certain publicly accessible locations, widely defined as ‘any place to which the public or any section of the public has access, on payment or otherwise, as of right or by virtue of express or implied permission.’ Publicly accessible locations Publicly accessible locations include a wide variety of everyday locations such as: Sports stadiums, festivals and music venues, hotels, public houses, clubs, bars, casinos, high streets, retail stores, shopping centres, markets, schools, universities, medical centres, hospitals, places of worship, government offices, job centres, transport hubs, parks, beaches, public squares, other open spaces. This list is by no means exhaustive, but it does demonstrate the diverse nature of publicly accessible locations. To manage these challenges, some organisations are relying on guarding and manual solutions or processes Organisations responsible for publicly accessible locations have many challenges they need to overcome while at the same time ensuring that safety and security is visible, yet non-intrusive. To manage these challenges, some organisations are relying on guarding and manual solutions or processes, whereas other organisations have invested heavily in diverse security technologies: CCTV, access control, intruder alarms, fire detection, intercoms and more. Managing public safety Effectively managing public safety and security is difficult and can be costly. Potential liabilities are something to seriously consider, based on forthcoming regulation and prevailing public expectations. When a critical event unfolds public reactions can be difficult to safely manage, however this is now a must do. Public space operators need to get the right information to the right people at the right time to protect all people, including every single member of the public. Their work with public and private sector clients around the world has enabled them to understand ‘protecting the public’ challenges and offer solutions that meet the specific requirements. Public space operators and organisations must keep track of all emerging threats and assess the potential impacts of when, not if, they will experience a critical event. Unpredictable threat environment Security executives have the challenge of protecting people, facilities and assets With an increasingly complex and unpredictable threat environment, it has never been more imperative to act faster. With more complete intelligence, organisations can increase their speed and decisiveness to assess risks and prevent those risks from harming people or disrupting operations. Leisure and entertainment is a prominent UK industry, that is also one of the most vulnerable to safety and security threats. Security executives have the challenge of protecting people, facilities and assets, while also maintaining friendly and welcoming services to visitors. Public venues and retailers must provide non-intrusive client safety and security. For the would-be criminal, safety and security provision should be a visible deterrent. Balancing these needs is where Everbridge can help organisations. Everbridge provides the critical event management platform to help organisations manage the full lifecycle of a crisis. Facilitating device activation Their platform correlates events from disparate safety and security systems into a common operating picture to focus people’s attention on what really matters. The platform provides users with actionable alerts, next step actions, and automated reporting to better manage risks, ensure compliance with operating procedures and support the business continuity. Automated workflows ensure rapid, consistent responses, reducing the risk of human error Automated workflows ensure rapid, consistent responses, reducing the risk of human error. It also facilitates device activation to ensure they are always in operational control and protecting the people. Dynamic reports and dashboards provide real-time actionable insights for the operations teams and senior executives. Benefits include: Real-time situational awareness. Reduces risk. Accelerates response times. Avoids technology lock-ins. Prevents information overload. Keeps stakeholders informed. With Everbridge, the organisation can deliver the public protect duty. Now and in the future.