The enthusiasm of ISC West 2017 continued through to the final hours of Friday, reflective of a show jam-packed with new technologies to address industry trends. Exhibitors seemed happy enough with booth traffic, which held up even on the final day.

Security industry trends

Industry trends drove much of the technology. For example, cameras are getting less expensive, which means it’s more cost-effective to specify systems with higher camera counts. Also, cameras are providing more data than ever, including megapixel and 4K resolutions and retention times are getting longer, driven both by regulatory issues and the increasing use of video in operational functions beyond security. These trends point to a growing importance of video data storage systems. Themes at ISC West included the need for integrators to consider carefully system storage requirements, and that storage systems should be designed specifically for use with video.

Seagate Technology Skyhawk

Seagate Technology emphasised the importance of simplicity related to video storage, which should be easy to buy, to deploy and to upgrade. For systems up to 64 cameras and needing up to 10 terabytes of storage, Seagate offers the Skyhawk NVR/DVR-ready system, compatible with all the large video management system (VMS) partners. Image Perfect software optimises the equipment for use with video, resulting in fewer dropped frames.

Higher security smart cards such as MIFARE DESFire EV2 can provide additional security instead of prox cards

Beyond 64 cameras, Seagate offers more sophisticated, customised systems; up to a petabyte of storage; and the ability to stack additional units for expansion. A common mistake when specifying storage is to underestimate capacity need. Because camera prices are coming down, it’s easy to add more cameras as a system plan evolves, but the additional cameras must also be considered in the storage equation.

Promise Technology SmartBoost

Promise Technology was another storage company with a high profile at ISC West, also highlighting products that are optimised and built specifically for the video market. The company’s SmartBoost technology refines how the system reads and writes data. It uses tools and algorithms such as Predictive Playback and a sequential pattern recording (Full Stripe) feature to reduce the CPU load and optimise performance. The result is more efficient and dependable operation – and no lost video frames.

Quantum simplifies the complexity of storage for end users – unifying various tiers of storage and presenting it as a single “drive letter.” Invisible to the end user, Quantum’s system manages multiple tiers of storage, including high-performance primary, high-capacity secondary, less expensive file-based tape and even cloud storage.

Cybersecurity in access control

Attendees will have heard a lot about cybersecurity at ISC West, mostly as it relates to IP video systems, but it is also an issue for access control. Scott Lindley, president of Farpointe Data, says too many companies – including big corporations – are leaving their access control systems unnecessarily vulnerable to being hacked. Two points of vulnerability in particular are 125 kHz prox cards and the Wiegand interface. Both are older technologies that continue to be used although there are more secure choices easily available.

Higher security smart cards such as MIFARE DESFire EV2 can provide additional security instead of prox cards, as can addition of two-factor authentication such as a keypad requiring a personal identification number (PIN). Alternatives to the Wiegand output include ABA Track 2, TCP/IP and the OSDP (Open Supervised Device Protocol) interfaces. Use of long-range readers can make systems more secure by enabling a reader to be located inside a secure area, up to 200 feet away and less susceptible to tampering. 

Security robotics at ISC West

There were several security robot companies at ISC West, including a section called the “Unmanned Security Expo.” One robotic company on display was Robotic Assistance Devices (RAD).

The first products should be available in July, after which RAD looks to produce 25 to 50 robots per month

They are using a robot "base" from SMP Robotics and adding additional intelligence (from NVIDIA). The idea is a robot that can detect humans and vehicles (to take the place of guards). There is a sophisticated system for navigation and avoidance. The robot collects information along its route; takes snapshots of what it "sees,” and uses scene matching to interpret what it encounters. The "layered" visual navigation system has been in development for seven years.

The first products should be available in July, after which Robotic Assistance Devices looks to produce 25 to 50 robots per month. They are taking "pre-orders” – $1,000 will reserve you a robot. Reportedly, “demand has been in the hundreds." They won't be selling the robots, but rather "renting” them at a rate that equates to around $7 per hour (24 hours a day/seven days a week). Critical infrastructure is one major market.

All in all, it was a great show and it could have gone on for two more days at least. (For some of us, delayed by cancelled Delta flights, it might as well have. I finally returned home on Monday morning after a “bonus” weekend in Vegas.)

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

Author profile

Larry Anderson Editor, SecurityInformed.com & SourceSecurity.com

An experienced journalist and long-time presence in the US security industry, Larry is SourceSecurity.com's eyes and ears in the fast-changing security marketplace, attending industry and corporate events, interviewing security leaders and contributing original editorial content to the site. He leads SourceSecurity.com's team of dedicated editorial and content professionals, guiding the "editorial roadmap" to ensure the site provides the most relevant content for security professionals.

In case you missed it

COVID-19 worries boost prospects of touchless biometric systems
COVID-19 worries boost prospects of touchless biometric systems

Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads. No longer in favour are contact-based modalities including use of personal identification numbers (PINs) and keypads, and the shift has been sudden and long-term. Both customers and manufacturers were taken by surprise by this aspect of the virus’s impact and are therefore scrambling for solutions. Immediate impact of the change includes suspension of time and attendance systems that are touch-based. Some two-factor authentication systems are being downgraded to RFID-only, abandoning the keypad and/or biometric components that contributed to higher security, but are now unacceptable because they involve touching. Touchless biometric systems in demand The trend has translated into a sharp decline in purchase of touch modality and a sharp increase in the demand for touchless systems, says Alex Zarrabi, President of Touchless Biometrics Systems (TBS). Biometrics solutions are being affected unequally, depending on whether they involve touch sensing, he says. Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads “Users do not want to touch anything anymore,” says Zarrabi. “From our company’s experience, we see it as a huge catalyst for touchless suppliers. We have projects being accelerated for touchless demand and have closed a number of large contracts very fast. I’m sure it’s true for anyone who is supplying touchless solutions.” Biometric systems are also seeing the addition of thermal sensors to measure body temperature in addition to the other sensors driving the system. Fingerscans and hybrid face systems TBS offers 2D and 3D systems, including both fingerscans and hybrid face/iris systems to provide touchless identification at access control points. Contactless and hygienic, the 2D Eye system is a hybrid system that combines the convenience of facial technology with the higher security of iris recognition. The system recognises the face and then detects the iris from the face image and zeros in to scan the iris. The user experiences the system as any other face recognition system. The facial aspect quickens the process, and the iris scan heightens accuracy. TBS also offers the 2D Eye Thermo system that combines face, iris and temperature measurement using a thermal sensor module. TBS's 2D Eye Thermo system combines face, iris and temperature measurement using a thermal sensor module Another TBS system is a 3D Touchless Fingerscan system that provides accuracy and tolerance, anti-spoofing, and is resilient to water, oil, dust and dirt. The 2D+ Multispectral for fingerprints combines 2D sensing with “multispectral” subsurface identification, which is resilient to contaminants and can read fingerprints that are oily, wet, dry or damaged – or even through a latex glove. In addition, the 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue. The system fills the market gap for consent-based true on-the-fly systems, says Zarrabi. The system captures properties of the hand and has applications in the COVID environment, he says. The higher accuracy and security ratings are suitable for critical infrastructure applications, and there is no contact; the system is fully hygienic. Integration with access control systems Integration of TBS biometrics with a variety of third-party access control systems is easy. A “middleware” subsystem is connected to the network. Readers are connected to the subsystem and also to the corporate access control system. An interface with the TBS subsystem coordinates with the access control system. For example, a thermal camera used as part of the biometric reader can override the green light of the access control system if a high temperature (suggesting COVID-19 infection, for example) is detected. The enrollment process is convenient and flexible and can occur at an enrollment station or at an administration desk. Remote enrollment can also be accomplished using images from a CCTV camera. All templates are encrypted. Remotely enrolled employees can have access to any location they need within minutes. The 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue Although there are other touchless technologies available, they cannot effectively replace biometrics, says Zarrabi. For example, a centrally managed system that uses a Bluetooth signal from a smart phone could provide convenience, is “touchless,” and could suffice for some sites. However, the system only confirms the presence and “identity” of a smart phone – not the person who should be carrying it. “There has been a lot of curiosity about touchless, but this change is strong, and there is fear of a possible second wave of COVID-19 or a return in two or three years,” says Zarrabi. “We really are seeing customers seriously shifting to touchless.”

How to maximise your body temperature detection systems
How to maximise your body temperature detection systems

There are many companies jumping into selling temperature detection systems to the state, local governments, hospitals, airports and local businesses, but do they know how to drive one? Anyone can get behind a car and drive it into a wall by accident. The same can happen with a temperature detection system.  The first thing you should ask is “does my firm have a certified thermographer?”. If not, the firm are at risk of getting a low quality system that is being resold to make quick cash. Businesses that are doing this do not know how to operate it properly. Asking the right questions Secondly, you should ask whether the system is NDAA compliant. NDAA compliance means that your temperature detection equipment is protected by U.S. law. Does your system have a HSRP device (blackbody)? HSRP (Heat Source Reference Point) is a device that will allow the camera to detect the correct temperature a distance. Even if the room temperature does change throughout the day, treat it as a reference point for the camera to know the temperature at that distance. Can your system scan mutliple people at once? Can your system scan mutliple people at once? This is a bad question but often asked since most systems will say yes. For ease, everyone wants to scan many people at once, but the best practice according to FDA and CDC guidelines is to run one person at a time for best accuracy. Why? The HSRP (blackbody) device tells the camera what the correct temperature is at a given distance away from the camera. Every foot you are away from the HSRP device will be off by 0.1 degrees roughly. If you are in a room full of people, let's say 6, in view of the camera, every person that is not next to the HSRP device (5) will be given an inaccurate reading. Hence why it is so important to run the system correctly with just one person at a time. You will also need to follow the 6 feet rule. If you take that into consideration, one at a time at 6 feet apart, the device should tell you how you need to run the system. Sensitivity of thermal imaging Is your system’s sensor accurate enough? The FDA recommends an error of ±0.5°C or better. When looking for a system, make sure it is better than what they recommend. I would recommend ±0.3°C or better. Do not purchase a system over ±-.5°C degrees as you are doing yourself and your customers or employees an injustice.  Another thing to look at is how many pixels it can determine the temperature from. Some cameras can only tell the temperature of 6 points on the screen, whilst others can take a temperature reading from each pixel. Take a 384x288 camera, for example, which would be over 110,000 points of temperature taking on a single image.      Thermal cameras are very sensitive, so there are a lot of do’s and don’ts. For example, the system cannot see through glasses or hats. On the below image you can see a person with the visual camera on the right, whilst on the left side is through a thermal camera.  Both are pointing at the same area. It is clear the person on the left side is “invisible” to the thermal imaging camera. Demonstrating the sensitivity of thermal imaging If you are a company who wants to detect the temperature of customers or employees though the front door, window or a car window, the answer would be no. You need a clear line of sight without any interference to scan for temperatures. Other things you need to look out for is wind and distance away from the HSRP (blackbody) device. Air and distance away from the HSRP device will make the system less and less accurate the more space between the device. Air and distance away from the HSRP device will make the system less and less accurate Thermal imaging and COVID-19 If you have a clear line of sight, is there anything I need to know? The answer is yes. Reflective materials such as metal can interfere with your temperature readings. Reflective materials are easily picked up from the thermal side so pointing at a medal, glass or anything reflective can cause inaccuracies within the system. In the age of COVID-19, temperature detection systems are more important than ever. Organisations must get a system in place to help scan for high temperatures in order to reduce the spread of the virus.

What are the security challenges of the oil and gas market?
What are the security challenges of the oil and gas market?

Protecting the oil and gas market is key to a thriving economy. The list of security challenges for oil and gas requires the best technology solutions our industry has to offer, from physical barriers to video systems to cybersecurity. We asked this week’s Expert Panel Roundtable: what are the security challenges of the oil and gas market?