Intruder warning devices - Expert commentary

The digital transformation of access control solutions
The digital transformation of access control solutions

The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorisation and the appropriate credentials. But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customised and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail Within the retail industry, autonomous, cashier-less stores are already growing in popularity The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms power continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.

Security and safety drive smart building strategies for the future
Security and safety drive smart building strategies for the future

Johnson Controls recently unveiled the findings of its 2018 Energy Efficiency Indicator (EEI) survey that examined the current and planned investments and key drivers to improve energy efficiency and building systems integration in facilities. Systems integration was identified as one of the top technologies expected to have the biggest impact on the implementation in smart buildings over the next five years, with respondents planning to invest in security, fire and life-safety integrations more so than any other systems integration in the next year. As advanced, connected technologies drive the evolution of smart buildings, security and safety technologies are at the center of more intelligent strategies as they attribute to overall building operations and efficiencies. SourceSecurity.com spoke with Johnson Controls, Building Solutions, North America, VP of Marketing, Hank Monaco, and Senior National Director of Municipal Infrastructure and Smart Cities, Lisa Brown, about the results of the study, smart technology investments and the benefits of a holistic building strategy that integrates security and fire and life-safety systems with core building systems. Q: What is the most striking result from the survey, and what does it mean in the context of a building’s safety and security systems? The results show an increased understanding about the value of integrating safety and security systems with other building systems Hank Monaco: Investment in building system integration increased 23 percent in 2019 compared to 2018, the largest increase of any measure in the survey. When respondents were asked more specifically what systems they we planning to invest in over the next year, fire and life safety integration (61%) and security system integration (58%) were the top two priorities for organisations. The results show an increased understanding about the value of integrating safety and security systems with other building systems to improve overall operations and bolster capabilities beyond the intended function of an individual system. Q: The survey covers integration of fire, life safety and security systems as part of "smart building" systems. How do smarter buildings increase the effectiveness of security and life safety systems? Hank Monaco: A true “smart building” integrates all building systems – security, fire and life-safety, HVAC, lighting etc. – to create a connected, digital infrastructure that enables individual technologies to be more intelligent and perform more advanced functions beyond what they can do on their own. For example, when sensors and video surveillance are integrated with lighting systems, if abnormal activity is detected on the building premise, key stakeholders can be automatically alerted to increase emergency response time. With integrated video surveillance, they also gain the ability to access surveillance footage remotely to assess the situation. When sensors and video surveillance are integrated with lighting systems abnormal activity on the premise can automatically be detected Q: How can integrated security and life safety systems contribute to greater energy efficiency in a smart building environment? Hank Monaco: Security, fire and life-safety systems can help to inform other building systems about how a facility is used, high-trafficked areas and the flow of occupants within a building. Integrated building solutions produce a myriad of data that can be leveraged to increase operational efficiencies. From an energy efficiency standpoint, actionable insights are particularly useful for areas that are not frequently occupied or off-peak hours as you wouldn’t want to heat or cool an entire building for just one person coming in on the weekend. When video surveillance is integrated with HVAC and lighting systems, it can monitor occupancy in a room or hallway. The video analytics can then control the dimming of lights and the temperature depending on occupant levels in a specific vicinity. Similarly, when access control systems are integrated with these same systems, once a card is presented to the reader, it can signal the lights or HVAC system to turn on. In this example, systems integration can ultimately help enable energy savings in the long run. Security and life safety systems contribute to help enable greater energy efficiency and energy savings in the long run Q: What other benefits of integration are there (beyond the core security and life safety functions)? Hank Monaco: Beyond increased security, fire and life-safety functions, the benefits of systems integration include: Increased data and analytics to garner a holistic, streamlined understanding of how systems function and how to improve productivity Ability to track usage to increase efficiency and reduce operational costs Enhanced occupant experience and comfort Increased productivity and workflow to support business objectives Smart-ready, connected environment that can support future technology advancements Q: What lesson or action point should a building owner/operator take from the survey? How can the owner of an existing building leverage the benefits of the smart building environment incrementally and absent a complete overhaul? Lisa Brown: Johnson Controls Energy Efficiency Indicator found that 77% of organisations plan to make investments in energy efficiency and smarter building technology this year. This percentage demonstrates an increased understanding of the benefits of smart buildings and highlights the proactive efforts building owners are taking to adopt advanced technologies. There is an increased understanding that buildings operate more effectively when different building systems are connected As smart buildings continue to evolve, more facilities are beginning to explore opportunities to advance their own spaces. A complete overhaul of legacy systems is not necessary as small investments today can help position a facility to more easily adopt technologies at scale in the future. As a first step, it’s important for building owners to conduct an assessment and establish a strategy that defines a comprehensive set of requirements and prioritises use-cases and implementations. From there, incremental investments and updates can be made over a realistic timeline. Q: What is the ROI of smart buildings? Lisa Brown: As demonstrated by our survey, there is an increased understanding that buildings operate more effectively when different building systems are connected. The advanced analytics and more streamlined data that is gathered through systems integration can provide the building-performance metrics to help better understand the return on investment (ROI) of the building systems. This data is used to better understand the environment and make assessments and improvements overtime to increase efficiencies. Moreover, analytics and data provide valuable insights into where action is needed and what type of return can be expected from key investments.

Can we prevent active shooters through AI technology?
Can we prevent active shooters through AI technology?

According to the reports of not-for-profit organisation Gun Violence Archive, the year 2018 has seen 323 mass shooting incidents as of November 28 in the United States. This number is 346 for the year 2017 and 382 for 2016 (more statistics are available here), with “mass shooting” defined as cases where four or more people are shot or killed in the same time period and location. While definitions of mass shooting vary with organisations in the US, the count of over 300 incidents per year, or about once per day on average, is simply alarming. It raises public safety concerns, ignites debates and protests, which in turn lead to public unrest and potentially more violence, and increases costs for governments from the regional to federal level. Most importantly, the loss of lives demands not only improvement in post-incident handling and investigation, but also new prevention technologies. Gunshot detection solutions AI weapon detection offers a more efficient alternative to prevent active shooting There are several gunshot detection solutions in the security market, commonly used by law enforcement agencies to detect and locate gun fires. These systems function based on acoustic recordings and analyses and often in combination with signals detected by sensors of the optical flash and shockwave when a gun is fired. However, gunshot detection by nature dictates that the law enforcement can only react to a shooting incident that has occurred. With fast action, law enforcement can prevent the incident from escalating, but lives that are lost cannot be recovered. With the development of artificial intelligence in object recognition, AI weapon detection offers a more efficient alternative to prevent active shooting: AI can visually detect guns based on their shapes before they are fired. The AI is trained to recognise firearms in different shapes, sizes, colours, and at different angles in videos, so that the AI weapon detector can be deployed with existing cameras systems, analyse the video feeds, and instantly notify security staff when a gun is spotted. Comparison of the advantages for law enforcement and public security agencies Legacy gunshot detection using sensors AI weapon detection Reactive measure: detect after guns have been fired Proactive measure: detect before guns are fired Time to action: within 1 second Time to action: within 1 second Unable to provide visual data about shooter(s) Can provide data about shooter(s) based on the camera recording: clothing, luggage (backpack, handbag, etc.), facial features, vehicle Unable to track the location of the shooter(s) before and after shooting because of the lack of sound Can track the shooter(s) using AI Person & Vehicle Tracking, AI Face Recognition, and AI License Plate Recognition False detection caused by similar sound such as fireworks and cars backfiring Minimal to no false detection, as AI can distinguish different types of handguns and rifles from normal objects (umbrella, cellphone, etc.) Require physical deployment of gunshot detection sensors Can be used with existing camera systems, do not require special hardware Complicated to deploy, require highly trained professional Easy to deploy as an add-on to existing video surveillance system - Can integrate with gun-shot detection to create a “double knock” audio and video active shooter alert system Gun-shot detection advantages In addition to advantages for law enforcement and public security agencies, this type of visual-based pre-incident detector has three-fold advantages for the public: Save lives by spotting the shooter before the shooting event. Minimise the chaos entailing an incident: panic and chaos caused by a shooting incident often adds to injury, as people run, fall, trample on others… With an AI weapon detector, when a gun is spotted, the system sends an alert to security staff, who can quickly control the situation in an organised manner and apprehend the intending shooter. Can be added as a SaaS (Security as a Service) component to small business and home surveillance systems, e.g., intrusion detection alerts (home invasion incidents with firearms number over 2500 per year nationwide). For a complete active shooter detection system, video-based AI detector can operate in conjunction with gunshot detectors for enhanced security. Traditional X-ray based weapon detection or metal detection entrance systems are complicated and expensive; with AI video technology, active shooter detection system can be cost-effective, and after all, what price tag can one put on a life? Written by Paul Sun and Mai Truong, IronYun

Latest RISCO Group news

RISCO to unveil Agility4 wireless system and Installer Cloud solution at The Security Event 2019
RISCO to unveil Agility4 wireless system and Installer Cloud solution at The Security Event 2019

Global security solutions provider, RISCO Group, is taking its team of experts to The Security Event at the NEC Birmingham this April. Agility4 wireless system From the 9th to the 11th of April, RISCO’s team of engineers and product professionals will be showcasing the company’s latest products including the recently updated Agility4 wireless system which includes outdoor intruder detection, a newly designed keypad and a PIR (passive infrared) camera detector. The team will also be introducing new wireless keypads, detectors and communication devices at the show. The event is dedicated to UK security professionals, installers and integrators who will have the chance to experience RISCO’s innovative technology first-hand as well as learning about upcoming releases. Ian Stones, Head of UK sales at the firm, said “We have some really exciting and innovative product releases coming up this year including a potentially game changing device which will be unveiled for the first time at the show. We can’t wait to introduce these new developments to our installers.”  Installer Cloud Visitors to our stand on SE56 will have the opportunity to see the Secured by Design accredited Installer Cloud and the new Agility4 system" He adds, “I’m looking forward to sharing more at The Security Event and RISCO’s team of experienced engineers will also be available for technical demonstrations and to answer any questions. Visitors to our stand on SE56 will have the opportunity to see the Secured by Design accredited Installer Cloud and the new Agility4 system. We love bringing our technology to life and can’t wait to join our industry peers at the event.” Further to speakers and interactive educational content, The Security Event will also host a ‘Designing Out Crime Zone’ in association with Secured by Design, a national police crime prevention initiative. “We are looking forward to revealing updates, launching new products and sharing expert knowledge with visitors to the event,” added Ian.

RISCO Group unveils Agility 4 wireless, modular and multi-layered security system
RISCO Group unveils Agility 4 wireless, modular and multi-layered security system

RISCO Group, globally renowned intruder alarm and security solutions provider has launched a new wireless product designed to deliver an enhanced performance for UK installations. The Agility 4 is a wireless, modular and multi-layered security systemAgility 4 multi-layered security system The Agility 4 is a wireless, modular and multi-layered security system which includes a new range of accessories available immediately with more add-ons expected to follow. With an enhanced choice of communication modules, ranging from IP to 3G, the new solution is designed to provide an adaptable solution for any type of installation and monitoring. Multi-socket communication modules enable parallel reporting to the cloud and monitoring stations with multiple IP addresses using one communication module. Enhanced intrusion detection Detecting intruders outside, before they enter the property was a key challenge as the risk of false alarms has historically been an issue in new security systems. This was a significant design consideration in respect of the design of the new Agility4 system with the inclusion of the new Beyond Wireless DT outdoor detector. Beyond Wireless leverages cutting-edge outdoor detection technologies and algorithms based on four detection channels. It is widely regarded as one of the most secure wireless outdoor detectors in the industry. The multi-layered protection includes cover tamper, active IR Anti-Mask and an accelerometer-based shock sensor. If force is applied to the detector, the shock sensor generates a tamper alert to the panel. Indoor and outdoor camera detectors  RISCO Group has now developed both indoor and outdoor camera detectors for alarm verification with new features RISCO Group has now developed both indoor and outdoor camera detectors for alarm verification with new features including Agility 4’s ability to receive a short clip of the event alongside a series of snapshots through an integrated camera. Upon detection, the camera is triggered automatically with snapshots and video clips available to the end user and the monitoring station simultaneously; all of which can be enabled by an installer using RISCO Cloud, the manufacturer’s remote, cloud-based system. Remote, cloud-based wireless system The complimentary range of new accessories include a contemporary keypad, a compact key fob and award-winning BWare detector now available as wireless. A Beyond Wireless DT detector camera will also be released in the forthcoming months, along with a discreet PIR detector and contemporary indoor sounder. Commenting on the launch, Ian Stones, head of sales for RISCO UK: “For a long time, RISCO has led the way for cloud-based wireless intruder system technology. Agility 4 moves this on a step further with significantly enhanced technology and improved aesthetics demanded by today’s end user customer.”

NSI Summit 2018 to focus on community security and fire safety innovations
NSI Summit 2018 to focus on community security and fire safety innovations

The National Security Inspectorate (NSI) is pleased to announce the gold sponsors for this year’s NSI Summit 2018 taking place in March at the Vox Conference Centre in Birmingham are confirmed as BT Redcare, CSL, RISCO Group and summit partner, IFSEC International, all of whom are preparing to share updates, industry insights and product demonstrations. Exclusively open to all NSI approved companies spanning security, guarding services and fire safety, and industry stakeholders including the Police and Insurer Community, the summit, now in its fifth year, is growing from strength to strength. Alongside the gold sponsors and summit partner, NSI approved companies will have access to the UK’s leading equipment, technology and business support providers, with over 60 exhibitors across two halls.  Delegates will benefit from: a Plenary session featuring the latest industry updates; an educational seminar programme led by high calibre specialists incorporating master-classes, panel discussion and case study presentations; one-to-one sessions with NSI industry experts; and not-to-be-missed special offers.The NSI Summit has always delivered in terms of staying abreast of current developments Building security partnerships John Ware, General Manager, BT Redcare comments “BT Redcare is again delighted to be sponsoring the NSI Summit which will bring into focus the latest initiatives, standards and developments in the industry. Redcare plays a key part in all these areas and we’re looking forward to meeting with delegates – we have lots to share.”  Speaking on behalf of CSL, Group Managing Director Simon Banks states “CSL are delighted to be a headline sponsor of the NSI Summit, for the 5th year in a row. It’s a must attend event in the Fire & Security calendar. Visit us on the day to find out more about our latest innovations and make the most of our live product demonstrations, whilst catching up with the team.” Greg Smith, Field Marketing Manager, RISCO Group adds “This is a fantastic event which has always delivered in terms of staying abreast of current developments and providing an opportunity for NSI approved companies to meet with the leading players within the industry. We’re delighted to support this key event.”This year’s summit theme of ‘Strengthening Partnerships’ explores the relationship between the private and public sectors Community security Gerry Dunphy, Brand Director IFSEC & FIREX International, said, “IFSEC is delighted once again to be a key partner of the NSI Summit in 2018. All NSI approved companies are essential to IFSEC and we always welcome an opportunity to meet with them to relay the key developments for the show in 2018. Our major offering for the installer community this year is the ‘Show Me How’ programme which will emphasise a wide range of learning opportunities and exhibitor demonstrations which will help our installer customers better understand the capabilities and potential of the technologies on offer at IFSEC 2018.” This year’s summit theme of ‘Strengthening Partnerships’ explores the relationship between the private and public sectors, shining a spotlight on working closer together to safeguard people, property and the wider community.  Maintaining industry standards NSI Chief Executive, Richard Jenkins comments, “We would like to thank BT Redcare, CSL, RISCO Group and IFSEC International for their continued collaboration on the NSI Summit. This essential one-day event is specially designed for NSI Approved Companies, the UK’s elite within the security and fire safety companies, to keep them abreast of industry developments and provide an important opportunity to share best practice, conduct business and meet face-to-face with our sponsors and exhibitors who provide an array of expertise within the security and fire safety sectors. It centres on maintaining the highest standards within our industry.”