Eff-Eff Electronic Door Locks & Locking Devices(53)
Browse Electronic Door Locks & Locking Devices
Electronic locking device products updated recently
The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for post and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing whilst obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc whilst sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for manoeuvre. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.
The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorisation and the appropriate credentials. But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customised and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail Within the retail industry, autonomous, cashier-less stores are already growing in popularity The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms power continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.
There’s no question that the popularity of Do-It-Yourself (DIY) security and home automation products is on the rise. The reasons for the growth in DIY sales are numerous, including increased awareness of home automation products, fast set-up, limited (if any) installation costs, and interoperability with other smart security products. In fact, with the parallel rise of smart home hubs like Alexa and Google Home, many people are opting to attempt the set-up of smart home devices without any professional assistance. According to a 2018 Residential Security Market Report prepared by Parks Associates and Security Sales & Integration magazine, “More than 60% of installing dealers now report that DIY systems are biting into demand for their services.” But the rise in DIY is not entirely bad news for security and home automation installers and dealers. There are a number of ways to view this glass as half-full. Let’s look at a few of them. Increase in revenue for dealers With their lower cost and perceived ease of installation, DIY products have broken down barriers for additional purchaseThere are reasons for dealers and installers to be cheerful about the rise of DIY. For one thing, according to that same Residential Security Market Report from Parks Associates, residential security dealers are doing quite well. The report states, “In 2017, revenues were up an average 7.72% for security dealers.” What about installations? The report goes on to say, “For 2017, the average number of installs per dealer was 22 per month, compared to 17 per month in 2016.” So, revenues are up for security dealers, and at least part of the reason can be attributed to the fact that DIY products can raise overall awareness of and spur interest in other home automation and security products. With their lower cost and perceived ease of installation, DIY products have actually broken down barriers for the additional purchase, and installation, of complete, professionally installed systems. Wireless, connected smart locks For example, the sale of wireless, connected smart locks (viewed by some consumers as DIY) can lead to opportunities for further home automation product sales and professional installations. Connected smart locks can actually act as an extension of a smart hub or controller. They can be used to wirelessly communicate with and control all the devices that make up a home automation system, including lighting, entertainment, thermostats, air, alarms, shades and more. With their lower cost and perceived ease of installation, DIY products have actually broken down barriers for new security installations And they can do all this from a prime, convenient location – the front door, as well as other points of entry like the side or back doors. Plus, smart lock conversion kits like Kwikset Convert let homeowners easily bring home automation capabilities to their door without altering the aesthetics of the entry. Connected smart locks can allow homeowners to set up their home with custom scenarios, right before they step inside. For example, residents can program their lock so that every time they unlock the door, a foyer light goes on, temperatures begin to rise to a set level – even connected coffee makers can begin to make a cup. Portfolio of home automation products One of the best ways to mitigate the ‘threat’ of DIY sales is for dealers and installers to become more versatileSmart locks are just one example of the potential of DIY products to spark a homeowner’s interest in a wide range of other home automation devices, many of which would benefit from professional installation. One of the best ways to mitigate the ‘threat’ of DIY sales is for dealers and installers to become more versatile and offer a complete portfolio of home automation products. The larger the home automation offering, the more devices there are to sell and install, the larger the installation required, the greater the need for professional installation. Many homeowners who feel like they have a certain level of handiness will start by trying to do it themselves with a DIY product. But things don’t always go as planned, especially if they are attempting to set up a robust home automation system. First off, just because a product is DIY doesn’t mean that the old products that are being replaced are going to easily make way for the new. A DIY thermostat or smart lock might require that the old equipment (and possibly wires) get tugged out of the wall. Messy holes might need to be filled. Advantages of professional installation Even after the old system has been removed, homeowners planning on setting up a connected system may soon realise they don’t have the electrical skills or technological know-how to install and connect all devices, get a system programmed correctly, and get everything up and running smoothly. Professional installers have learned from experience; there’s very little that they haven’t seen before. With their years of experience, installers know the best way to automate a home and how to create a custom smart home experience Do-it-yourselfers might be able to solve problems by searching the internet and finding videos. But, then again, they might not. After going the DIY route once, many full-home automation system enthusiasts are beginning to realise that the best way to get things done right the first time is to leave the installation and set-up to a professional. Professional installers can and should bring an extra level of experience and guidance to the process. Their services should go beyond tech installation and also include interface design. With their years of experience, installers know the best way to automate a home – how to create a custom smart home experience that doesn’t make the user feel less than smart. Selling additional home automation products If a problem arises due to installation error, the DIYer does not have any recourse to correct these mistakesResidential security dealers who offer professional installation should be willing to embrace the DIYer who has attempted to do a self-install but has not been able to complete the process successfully. With an open mind to this scenario, they can save the day for the DIYer, as well as create an opportunity to sell additional home automation equipment that the DIYer may not have known to be available. The disparity between DIY and professional installation also brings to light the fact that there are no ‘satisfaction guarantees’ and no ‘installation/labour warranty’ available when a home automation system is installed by a DIYer. If a problem arises with either the equipment connectivity due to installation error, or if a piece of equipment is installed incorrectly, the DIYer does not have any recourse to correct these mistakes. This may not be as critical if a DIYer installs a minor piece of equipment, but with something as critical as securing and protecting their home with a home automation and security system, most people want full peace of mind that everything has been installed correctly. Reduces connection instability According to a 2017 study by the analyst firm, IHS Markit, “The quality of the equipment is usually higher in professionally installed systems, and professional configuration and setup greatly reduces the potential for connection instability…” This is an issue that DIYers may come to realise over time. On the other hand, one issue DIYers may recognise right away, especially if they are attempting to connect multiple devices, is that the connectivity may be inconsistent. Professionally installed devices operating on a wireless protocol might deliver better, consistent, longer-range connectivity IHS Markit explains that, “DIY systems rely on open protocols and Wi-Fi connectivity that can sometimes be unreliable, creating connection issues. Some of the sensors can become unrecognisable to the system, requiring intervention from the user. In contrast, professional wireless systems rely on UL- or EN-certified equipment to operate on the basis of proprietary frequency, enabling them to work with the control panel much more seamlessly.” In other words, professionally installed devices operating on a wireless protocol, even an open-source protocol like Z-Wave, might deliver better, consistent, longer-range connectivity, and fewer headaches. Not everyone is a DIY customer There are customers who want someone to install the devices correctly and help them learn how to use and maintain themThere’s no doubt that there’s a segment of the security and home automation market that loves to spend their free time doing their own home improvement. They are watching videos, reading how-to books and manuals, and enjoying every minute. There’s also a segment of the market whose top goal is to save money up front. For these customers, there’s no getting around the joy of saving money with the lower cost of many DIY products. But there are also a great number of prospective customers out there for whom DIY is of absolutely no interest. These consumers do not want to be their own IT department. They want expert help: they want someone to install the devices correctly and help them learn how to use and maintain them. The IHS Markit study points out what many home automation dealers already know: that the elder and aging-in-place markets are an ideal destination for the security and convenience of home automation products. The study says, “Many senior citizens are not tech savvy enough to install a DIY system by themselves, so they tend to rely on professionally installed systems that are usually maintained by a family member.” Along with the senior citizens market, there are many other market segments out there that still desire worry-free professional installation. Installers should offer a range of products that includes some DIY products, and some leave-it-to-a-pro products Producing complete and custom solutions Perhaps the best way for dealers and installers to stave off that feeling of doom that they might have about DIY is to tackle the problem head on and be creative. Offer a range of products that includes some DIY products, and some leave-it-to-a-pro products – consider the DIY product a great entry point for a more comprehensive system. Play up the peace of mind that comes with professional installations and support that pitch with flexible monitoring contracts and service plans. Share what you do and why; relay your passion for producing complete and custom solutions and communicate how you add value to any and every sale. No one, not even the most tech-savvy consumer, wants to install their own products if the end result is that the product doesn’t work the way it should. That’s where the pros can, should and will always come into play.
The SourceSecurity.com team attended this year's IFSEC International 2014 with great anticipation to view the new innovations first-hand on show and see how the move to London would impact visitor experience. To capture the show, we have provided a summary of IFSEC in pictures above. Highlights from IFSEC 2014 We saw an overwhelming number of people and products; here is a snapshot of our IFSEC experience for 2014: FLIR SourceSecurity.com attended FLIR’s press briefing which took place on the first day of the show. FLIR emphasised that it was more than just a professional thermal camera company – the company has recently released $499 thermal cameras to the consumer industry. For FLIR, the security market is growing industry. With the acquisition of Lorex in 2012, FLIR will be introducing Lorex products under the FLIR brand (consumer side, not professional) in EMEA. At IFSEC 2014, FLIR also introduced FLIR One- its first consumer camera for the iPhone. HID Global HID Global’s Director of Technical Services, Nick Hislop, talked SourceSecurity.com through its emerging technologies in the form of leveraging Bluetooth LE and NFC. The concept is simple: to make mobile access more convenient. Nick also demonstrated how HID’s products and solutions are relevant for a number of vertical markets including Enterprise, Healthcare, Education and Finance Services. Nedap ID Ido Wentink of Nedap Identification Systems introduced SourceSecurity.com to the Nedap IDS advanced licence plate recognition product, ANPR Access HD. The company also introduced uPASS Access, a backward compatibility convertor and UHF ISO Card for improved user experience for uPASS platform. The ANPR Access HD for advanced license plate recognition is a higher resolution lens than its previous release, the ANPR Access camera. Other features of the ANPR Access HD include a more powerful CCV, increased IR illumination and expanded OCR library. SourceSecurity.com’s visit to STI’s booth saw the company emphasise its importance not just within the fire industry, but within the security industry as well Security Technology International (STI) SourceSecurity.com’s visit to STI’s booth saw the company emphasise its importance not just within the fire industry, but within the security industry as well. STI is looking to get the message out there that they’re not just a fire company. Paul Machacek, Sales Team Business Developer, talked SourceSecurity.com through a number of STI’s products including STI’s Polycarbonate Protective Covers, Steel cages, Call Points & Switches and Stand-alone Alarm Systems. Samsung - Changing the face of IP On day two of the show, Samsung hosted a press conference for the global launch of its Open Platform. This new initiative gives users the opportunity to utilise third party APPs with Samsung's WiseNetIII cameras and domes. Tim Biddulph, Product Manager at Samsung, hosted the conference and offered an insight into Samsung's tag line for the show, "Changing the face of IP". Taking a lead in IP technology, Samsung is seeking to give end-users a solution that is effectively future-proof in terms of expandability and its ability to integrate with new technology in the future. Ease of use was also at the top of Samsung's agenda with its "Zero configuration" NVR solution and there was a large focus on the power of integration within different vertical markets. ASSA ABLOY ASSA ABLOY showcased a number of its access security solutions on its impressive stand. SourceSecurity.com met with Thomas Schulz who gave a comprehensive tour of the stand. From ASSA ABLOY Aperio, there was a focus on the benefits of energy saving for its customers with the Aperio range now featuring battery-powered online and offline locks, cylinders, and escutcheons. There was also ABLOY CliQ technology on show which integrates electronics and mechanics, combining mechanical ABLOY PROTEC locking solutions with low-power electronics. A number of access control solution from effeff, Mul-T-Lock, Traka and Yale were also showcased on the stand. VIVOTEK At the VIVOTEK stand, the SourceSecurity.com team were given a tour of the stand which featured their low-light solution and their latest retail solution On day one of the show, VIVOTEK hosted a luncheon in the Crown Plaza hotel, just a stone's throw from the ExCeL centre. As well as enjoying a great meal, attendees were privy to the company's main focus for the coming year and its milestones and product roadmap for 2014 and beyond. The warm hosts included: Steve Ma, Executive Vice President at VIVOTEK, Brandy Lin, Team leader at VIVOTEK and Owen Chen, the Chairman of VIVOTEK. During the luncheon, VIVOTEK shared its vision of being seen as more than just a camera manufacturer, rather, as a total solution provider. The message of the importance of integration, an increased awareness of the need for reliability of products and ease of use was key on their agenda. At the VIVOTEK stand, the SourceSecurity.com team were given a tour of the stand wich featured their low-light solution and their latest retail solution, which was made up of a series of mini high definition cameras for discreetness. SALTO Salto showcased its latest wireless access control door solution, the XS4 mini. XS4 Mini includes SALTO Virtual Network SVN and wireless capability with mini installation needs. Embedded in the heart of the product is the latest microprocessor technology, ready for the connected world, open and future-proof for online connection, wireless technology and NFC. Seagate During an editorial briefing with the SourceSecurity.com team, Seagate shared their valuable knowledge of the history of storage manufacturing and stressed the importance of choosing the right storage solution for installations. With the rise of "Big Data" and increased storage needs in the surveillance market this is something which has become much more of a consideration. As one of only three storage manufacturers, Seagate's experience and know-how within the surveillance industry is vast and it hopes to push out its knowledge to the industry to ensure that people know the benefits of choosing a fit-for-purpose storage solution. Western Digital SourceSecurity.com spoke to Martin Jefferson at Western Digital, who gave a very detailed explanation of how the new WD purple surveillance hard drive had been created and why it was fit-for purpose. It was a very insightful presentation of the product and demonstrated the inherent need for the market to understand why choosing the right storage solution is vital to any installation.OptexAt the Optex stand SourceSecurity.com spoke to Aude Desbieres, who gave a breakdown of the latest offering from Optex at the show. Amongst the array of new products on the stand, Optex showcased the new analytics features of its laser Sensor, REDSCAN, and a new people counting solution developed by Giken Trastem. There was also a focus on full integration of its IP sensors with Milestone XProtectand Hawkeye mapping software and new grade 2 and grade 3 detectors. Our very own Larry Anderson also sat down with their MD Mike Shibata to discuss the company's future and development roadmap. During an editorial briefing with the SourceSecurity.com team, Seagate shared their valuable knowledge of the history of storage manufacturing and stressed the importance of choosing the right storage solution for installations Tyco Stephen Carney, Director of Product Management for Video Solutions at Tyco Security Products, set down with SourceSecurity.com to give an insight into their product roadmaps and their main focus for the coming year. He spoke on their concept of Unification which looks at integration at code level rather than simply API level. With the launch of their victor 4.5 Unified Client, they hope to give the end user a solution that is more secure and efficient for businesses and organisations that require an active surveillance environment. He also mentioned Tyco's increased focus on the end user and customer experience being at the heart of how they develop their product offering for the market. Senstar At the Senstar booth, SourceSecurity.com were given an insight by Miriam Rautiainen into Senstar's new FlexZone, a fence-mounted sensor that detects and locates intruders. The FlexZone can also locate multiple intrusions simultaneously and is scalable, thus making it an easy and flexible option no matter how big or small the installation needs to be. With FlexZone, less equipment and infrastructure is required, adding to the flexibility of the product. Furthermore, rejecting false alarms is even easier with FlexZone than with Senstar's previous offerings. Miriam also mentioned the acquisition of Optellios earlier this year, which has allowed Senstar to expand on their fibre technology portfolio. Nedap SourceSecurity.com also attended a seminar at the Nedap stand about their collaboration with EE. EE has selected Nedap's AEOS security management platform as part of their plan to expand their business throughout the UK. Since the AEOS system is completely web-based, EE employees can access it from anywhere. Traka At the Traka stand, Tanveer Choudhry, Global Marketing Manager at Traka, gave us a demonstration of their new Traka 21 - a plug and play key management system designed for small to medium size businesses. The system is very user-friendly and easy to use, as Tanveer showed us. Furthermore, a PC connection isn't necessary as the Traka 21 can operate as a stand-alone. However, the system features a USB port, which allows employees to extract user data. The Traka 21 will be available later this year.
ASSA ABLOY was recently named by Forbes as one of the world’s 100 most innovative companies ASSA ABLOY, the largest global supplier of intelligent lock and security solutions, responsible for one in every 10 lock and security installations worldwide, is focusing on innovation on Stand D1700 in Hall S17 at IFSEC 2014 (Excel, London, UK from 17-19 June, 2014.) Recently named by Forbes as one of the world’s 100 most innovative companies, ASSA ABLOY will showcase new products and solutions for a wide range of end user markets, bringing competitive advantage to OEM and system integrator partners, and improving customers' lives through greater security, safety and convenience ASSA ABLOY has a greater presence than ever at IFSEC 2014, demonstrating an innovative range of access control and door security solutions, as well as leading edge products from leading brands from the Group’s portfolio, including Abloy, Eff-Eff, Mul-T-Lock, Traka and Yale. ASSA ABLOY Access Control Solutions will feature the world’s first wireless lock range for security doors, using the revolutionary Aperio™ wireless locking technology, plus the latest developments in the Seos™ mobile access ecosystem. ASSA ABLOY will be demonstrating an innovative range of access control and door security solutions from leading brands from the Group’s portfolio, including Abloy, Eff-Eff, Mul-T-Lock, Traka and Yale Abloy will display CLIQ Remote as an innovative, easy-to-fit electromechanical locking system with electronic keys. Eff-Eff is featuring egress control and the latest escape door systems, whilst Mul-T-Lock will introduce its SMARTair™ access control portfolio and WatchLock™, the intelligent padlock with real time sensing capability so that owners can know exactly when the padlock has been opened, closed or attacked. Traka will be showcasing its latest intelligent key management systems and Yale will be unveiling digital locking solutions for the residential market. ASSA ABLOY Access Control Solutions is also featured in the IFSEC International Academy Conference Programme, discussing the latest findings in commercial building security with the challenging question: “Is the future of commercial building security built-in or bolted on?” Cristian Frankic, Vice President Business Development EMEA at ASSA ABLOY, said: “With the emergence of the “internet of things” and the growth in intelligent buildings and smart homes, we are at the start of a new phase in security evolution.” “At IFSEC 2014 we as ASSA ABLOY aim to showcase a range of innovative solutions which, combine to create a powerful proposition of specialist knowledge, experience and revolutionary products. There is a host of exciting future-proof developments in IP, digital, mobile and cloud based security systems on show from our brand portfolio.” “Our aim is to demonstrate ASSA ABLOY’s unique ability to operate as a global solutions partner, providing the right answer for any end-user market requirement, in partnership with leading OEMs, system integrators and installers.”
ASSA ABLOY will also showcase its Aperio™ L100 wireless security lock range at the event One partner for all your security needs: ASSA ABLOY helps millions of customers around the world to find the best access and security solutions for their business. ASSA ABLOY’s global leadership incorporates the combined power of award-winning products and technology from ABLOY, Yale, Traka, TESA, IKON and effeff. ASSA ABLOY drives the future of wireless access control with battery-powered product solutions for any building or business. At Intersec 2014, the ASSA ABLOY showcase in Hall S1, Stand 204, includes: ASSA ABLOY´s Aperio technology For expanding an access control system, wirelessly and cost-efficiently. The technology enables an organisation's mechanical locks to be integrated into a new or existing access control system, without breaking the bank. The Aperio range is growing fast, and now includes Aperio L100 wireless locks, Aperio AS100 wireless door status sensor, and the Aperio PINpad escutcheon. Aperio open architecture allows the technology to be seamlessly integrated into third-party building management systems. Nedap, Schneider Electric, Genetec, G4S, TDSi, RBH ARAS and Gallagher are among the major OEMs showcasing Aperio wireless access products at Intersec 2014. SMARTair from ASSA ABLOY´s brand TESA SMARTair is an affordable suite of wireless access control products for small to medium-sized businesses and buildings, and a seamless step up from an organisation’s mechanical master key system. SMARTair is easy to install, with no cabling or wires, and therefore requires no electricians on-site. SMARTair from TESA enables facilities managers to change access rights in the most cost-effective way, and offers a variety of access rights updates—such as update on card via wall-reader or online via communication hub—in one system.
Related white papers
The role of IT in physical access control
Securing student accommodation for the next generation
Building a safe ecosystem for visitors post COVID-19Download
Smart security cameras: excellence in retailDownload
5 reasons to integrate mobile technology into your security solutionDownload
ASSA ABLOY SMARTair provides access control solutions to Colegio Diocesano Santo Domingo in Orihuela, Spain
- Assa Abloy’s SMARTair® wireless access control system secures heritage school site in Spain
- ASSA ABLOY SMARTair provides access control solutions to Colegio Diocesano Santo Domingo in Orihuela, Spain
- Boon Edam enhances campus security by installing turnstiles and revolving doors at the Columbia College Chicago
- ASSA ABLOY Opening Solutions EMEA launches Incedo™ Business access management solution