ASSA ABLOY Aperio®: Integrate security doors into access control systems at a low price
ASSA ABLOY Aperio®: Integrate security doors into access control systems at a low price

The Aperio® Lock L100 features optimum physical protection and transmits comprehensive information on door status to the access control system via a wireless connection. Managing access authorisations online The lock allows you to easily integrate security doors into an access control system at a very reasonable price. It enables you to manage access authorisations online and in real time using a single system. Users can instantly obtain "open/closed" and "locked: yes/no" status information from the lock at a glance. The optimum burglary protection and resistance against extreme temperatures (down to -65 °C) ensure that the Aperio® lock is also suitable for outside doors with special security requirements. The lock features a protection rating of IP55. Unique wireless access solution Irrespective of the access control system type, Aperio® enables access control doors to be integrated using a wireless solution without any cabling and without any alterations to the door during installation, all at a considerably lower price than a wired high-end solution. The Aperio® Lock L100 offers a unique, easy way to integrate both outside and inside doors with high security requirements into access control systems. Users can continue to use existing cards or PIN codes to open and lock the new Aperio® doors while mechanical keys cease to be necessary.The Aperio® Lock L100 complies with EN 179 and EN 1125 requirements and bears a CE mark. It is available for fire doors and for different door profiles (Euro, Scandinavian, and Finnish). Visit www.assaabloy.co.uk/aperiowirelesslocks for more information.

Add to Compare
Upgrade to Aperio® – forget about keys and operate more doors with access cards!
Upgrade to Aperio® – forget about keys and operate more doors with access cards!

Whether you want to invest in a new wireless access control system or upgrade your existing doors, Aperio® is the intelligent answer to 21st Century building control. Aperio® wireless locks can be developed efficiently in any size of business, helping you to take control with a system that is quick and easy to install and delivers significant cost and energy savings. So, what’s the 21st-century solution? Upgrade your doors to Aperio® to… Solve the lost key problem by using secure RFID cards instead of keys Save time and money with keyless access control Connect more doors to your EAC system Get more control with audit trails Add access controlled doors without cabling Save energy with battery powered locks Aperio® is manufacturer-independent – over 100 access control providers offer wireless door upgrades with Aperio®.  It´s so easy to upgrade a mechanical door to Aperio® – wireless and without disruption Step 1 Contact your access control provider to plan the upgrade. Don’t forget, Aperio® can be installed door- by-door and is suitable for interior or exterior, medium to higher security doors. Step 2 Install battery-powered devices with minimal disruption at the doors - no wiring is needed. Step 3 Save running costs. In comparison to wired access control doors, which are constantly under power, Aperio® doors only consume electricity when presenting a card. The battery life-time is approx. 40,000 cycles (2 years), and they are easy to exchange.

Add to Compare
Aperio® Technology enables cost effective expansions of access control systems made by any manufacturer
Aperio® Technology enables cost effective expansions of access control systems made by any manufacturer

ASSA ABLOY’s Aperio® Technology enables the cost-effective integration of doors with mechanical locks into both new and existing access control systems. Thanks to its innovative wireless technology, integrating doors into an access control system will no longer require extensive wiring or structural alterations in the future. Doors will merely need to be equipped with electronic Aperio® locks with RFID readers and linked to the online access control system via a communications hub. The manufacturer independent architecture of Aperio® provides a convenient way of connecting with most access control systems via RS485, Wiegand, or IP interface. The Aperio® cylinders, escutcheons or locks communicate via an encrypted wireless link to a communication hub that is wired directly to the system. Highlights at a glance Additional doors can be integrated into access control systems at a low cost Update of access authorisations online and in real time Battery powered cylinders, escutcheons and locks with RFID reader functionality Easy to install with no structural alterations or wiring to the door No need to replace the existing RFID cards or transponders as these can also be used for wireless Aperio® doors. Standard RFID technologies are supported (iCLASS®, MIFARE™ Classic and DESFire™, HID PROX/EM410) Open standard, meaning Aperio® can be combined with all access control systems More than 100 global leading access control OEM’s already support Aperio®

Add to Compare
SALTO uses augmented reality to virtual preview XS4 Mini on door
SALTO uses augmented reality to virtual preview XS4 Mini on door

Trying to imagine what a particular design of handle set will look like on a door is not always an easy task. Different finishes and different door materials can make it hard to visualise exactly what the actual combination will look like in a building. To address this SALTO Systems have developed a useful app that uses augmented reality to accurately display how their new XS4 Mini electronic lock will look in a variety of combinations via a tablet or smart phone. The app contains information about XS4 Mini, a gallery of images, tech specs and a door configurator where you point the camera of your tablet or smart phone at the cover of the XS4 mini catalogue to see a 360° view of how XS4 Mini will look on that door with a choice of handle styles. SALTO is the first access control company to develop and use this technology to present their products, enabling potential XS4 Mini users to view exactly how it will look on their own doors. It is part of a comprehensive range of ‘go to market tools’ developed for our new generation of XS4 2.0 re-volution products including a dedicated XS4 Mini website, new  vertical market catalogues, new SALTO access control portal for our partners, new experience centre, social initiatives and much more. To use the new tool, simply download the XS4 Mini App in your preferred format (iOS or Android) to access the augmented reality application which will give you a selectable virtual preview of the XS4 Mini product range to see how the XS4 Mini will look on your door.

Add to Compare
New models boost SALTO GEO range
New models boost SALTO GEO range

SALTO Systems has launched additional new models to its best selling GEO (Global Electronic Opening) cylinder range. Already one of the most versatile electronic cylinders available on the market, the new models include Swiss profile cylinders, Scandinavian cylinders and cog wheel cam cylinders. These are joined by a new panic function cylinder specially designed to fit panic locks that need a fixed cam position, grips for use in DDA (Disability Discrimination Act) environments enabling anyone with a disability to be able to easily open doors fitted with GEO cylinders and finally a detachable, removable knob version. Modular, flexible and easy to fit, the IP66 rated SALTO GEO can be used in any type of door. Part of SALTO’s innovative 360° wire free locking solution, it is fully compatible with most RFID technologies meaning no more problems with master key management. So whether you want to control a standard door, glass door, aluminium door, steel door, a lift or elevator, a car park, entry to a data centre, access to a server rack, the security of a container or anything else SALTO GEO is the answer. And thanks’ to SALTO’s Data-On-Card and wireless real-time on-line technology, users can manage access credentials and add, restrict or delete access privileges on the fly. And GEO’s open architecture means it can also be used to connect to an existing security system to create a fully integrated platform, delivering increased efficiency, cost savings and complete access control flexibility.

Add to Compare

Electronic locking devices - Expert commentary

Moving to sophisticated electric locking
Moving to sophisticated electric locking

In part one of this feature, we introduced the shotbolt – a solenoid actuator – as the workhorse at the heart of most straightforward electric locking systems. Shotbolts remain at the core of most sophisticated electric locking solutions as well. But they are supplemented by materials and technologies that provide characteristics suited to specialist security applications. Here we look at some more demanding electric locking applications and contemporary solutions. Preventing forced entry Where the end of the shotbolt is accessible, the electric holding force can be overcome by physical force. That’s why anti-jacking technology is now a frequent feature of contemporary electric solenoid lock actuators. Anti-jacking, dead-locking or ‘bloc’ technology (the latter patented by MSL) is inherent to the way the locking assembly is designed to suit the requirements of the end application. The patented bloc anti-jacking system is highly effective and incorporated into many MSL shotbolts deployed in electric locking applications. The bloc technology uses a ring of steel balls in a shaped internal housing to physically jam the actuated bolt in place. A range of marine locks is widely used on Superyachts for rapid lockdown security from the helm Real life applications for MSL anti-jacking and bloc-equipped shotbolts include installation in the back of supermarket trucks to secure the roller shutter. Once locked from the cab, or remotely using radio technology, these shutters cannot be forced open by anyone with ‘undesirable intentions’ armed with a jemmy. A range of marine locks is widely used on Superyachts for rapid lockdown security from the helm. While anti-jacking features are an option on these shotbolts, consideration was given to the construction materials to provide durability in saltwater environments. Marine locks use corrosion-proof stainless steel, which is also highly polished to be aesthetically pleasing to suit the prestigious nature of the vessel while hiding the innovative technology that prevents the lock being forced open by intruders who may board the craft. Rotary and proportional solenoids sound unlikely but are now common A less obvious example of integrated technology to prevent forced override is a floor lock. This lock assembly is mounted beneath the floor with round-top stainless-steel bolts that project upwards when actuated. They are designed to lock all-glass doors and are arguably the only discreet and attractive way to lock glass doors securely. In a prestigious installation at a historic entranceway in Edinburgh University, the floor locks are remotely controlled from an emergency button behind the reception desk. They act on twin sets of glass doors to quickly allow the doors to close and then lock them closed with another set of subfloor locks. No amount of stamping on or hitting the 15mm protruding bolt pin will cause it to yield, thus preventing intruders from entering. Or leaving! Explosion proofing In many environments, electric locking technology must be ATEX certified to mitigate any risk of explosion. For example, remote electric locking is used widely on oil and gas rigs for stringent access control, general security and for emergency shutter release in the event of fire. It’s also used across many industrial sectors where explosion risks exist, including flour milling, In many environments, electric locking technology must be ATEX certified to mitigate any risk of explosionpowder producers, paint manufacture, etc. This adds a new dimension to the actuator design, demanding not only intrinsically safe electrical circuits and solenoid coils, but the careful selection of metals and materials to eliminate the chance of sparks arising from moving parts. Resilience under pressure The technology boundaries of solenoids are always being pushed. Rotary and proportional solenoids sound unlikely but are now common. More recently, while not directly related to security in the traditional sense, proportional solenoid valves for accurately controlling the flow of hydrogen and gases now exist. Magnet Schultz has an extensive and somewhat innovative new range of hydrogen valves proving popular in the energy and automotive sectors (Fig. 2-6). There’s a different kind of security risk at play here when dealing with hydrogen under pressures of up to 1050 bar. Bio security Less an issue for the complexity of locking technology but more an imperative for the effectiveness of an electric lock is the frequent use of shotbolts in the bio research sector. Remote electric locking is commonplace in many bioreactor applications. Cultures being grown inside bioreactors can be undesirable agents, making 100% dependable locking of bioreactor lids essential to prevent untimely access or the unwanted escape of organisms. Again, that has proven to be topical in the current climate of recurring coronavirus outbreaks around the world. More than meets the eye In part one, I started by headlining that there’s more to electric lock actuation in all manner of security applications than meets the eye and pointed out that while electric locking is among the most ubiquitous examples of everyday security, the complexity often involved and the advanced technologies deployed typically go unnoticed.Integrating the simplest linear actuator into a complex system is rarely simple For end users, that’s a very good thing. But for electro-mechanical engineers designing a system, it can present a challenge. Our goal at Magnet Schultz is to provide a clearer insight into today’s electric locking industry sector and the wide range of locking solutions available – from the straightforward to the specialised and sophisticated. Integrating the simplest linear actuator into a complex system is rarely simple. There’s no substitute for expertise and experience, and that’s what MSL offers as an outsource service to designers. One benefit afforded to those of us in the actuator industry with a very narrow but intense focus is not just understanding the advantages and limitations of solenoid technology, but the visibility of, and participation in, emerging developments in the science of electric locking. Knowing what’s achievable is invaluable in every project development phase.

Providing fast and secure access in life-threatening emergencies
Providing fast and secure access in life-threatening emergencies

A defibrillator can save the life of a person suffering from cardiac arrest – but it is most effective when used in the first few minutes of the patient collapsing. Studies have shown that a shock given within the first three minutes provides the best chance of survival and even one minute of further delay can substantially lower the chances of recovering. Public Access Defibrillators (PADs) were created to allow untrained members of the public to deliver life-saving treatment in those precious minutes before an ambulance arrives. There are currently over 10,000 in the UK, located in parks, offices, high streets and sporting venues, and they are especially popular in rural communities, where ambulance response times are longer. Every second counts Over the years there has been a long-running debate as to whether PADs should be kept openly accessible or locked. Leaving them open could lead to theft, vandalism or misuse. Leaving them locked could mean that precious moments are lost waiting for a local guardian to arrive – and could even cost a life. To save as many lives as possible, it’s clear that PADs need to be available 24/7, fully operational and easily accessible to users and local guardians. But there is a solution that can meet all these conditions – a lock that can protect against vandalism while providing convenient instant access when required. Life-saving solutions Over the years there has been a long-running debate as to whether PADs should be kept openly accessible or lockedDigital locks are ideal for securing PADs because they don’t require a key, and anyone can be given access over the phone. In the case of a cardiac arrest, the user calls 999 and the ambulance controller provides them with a simple, easy-to-remember code. The ambulance controller can then advise them, step by step, what to do. Local guardians, who have responsibility for the PAD, can be provided with an override key to enable them to monitor and maintain the defibrillator. The PAD cabinets built by Duchy Defibrillators show exactly how this works in practice. Based in rural Cornwall, Duchy Defibrillators manufactures, supplies and installs monitored PAD cabinets. To provide public access to the defibrillators, it needed a lock that could keep its cabinets secure, make them easily accessible and withstand the stormy Cornish weather. Codelocks recommended a digital electronic lock that could operate on a standalone battery, making it especially suitable for remote areas. As well as offering flexible access, digital locks come with a range of varying options and functions to suit different applications. As Duchy Defibrillator cabinets are installed in a wide variety of locations and sometimes need to withstand outdoor exposure, it opted for a robust electronic digital lock that is both affordable and easy to set up. A digital-access revolution Using smart locks in combination with a dedicated app or portal allows operators to send time-sensitive codes to end-users The example of Duchy Defibrillators shows how digital locks can be used to keep defibrillator cabinets secure while affording instant access to users when they are needed. But the flexibility of digital locks also makes them suitable for securing property and equipment in a wide variety of situations, especially for shared and public facilities. This is why you’ll increasingly see digital locks used to secure restricted areas in hospitals, schools and offices, as well as shared facilities like hotel and gym lockers, public restrooms and more. Digital locks are available for a number of specific applications, including doors, lockers and cabinets. They can range from simple mechanical locks through to more sophisticated electronic locks and state-of-the-art smart locks. Using smart locks in combination with a dedicated app or portal allows operators to send time-sensitive codes to end users – making them very popular for contactless entry and with facilities managers that need to manage access to buildings and campuses. One thing is certain – whatever your access control requirements are, there’s a keyless lock solution to suit. The digital access revolution is here.

Automatic gates: Making the right investment for access control
Automatic gates: Making the right investment for access control

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for post and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing whilst obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc whilst sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for manoeuvre. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

Related white papers

Physical access control in higher education

The role of IT in physical access control

Securing student accommodation for the next generation