Messoa CCTV Dome Cameras(22)
MESSOA Analogue 1080P solutions along with a full range of cameras and DVRs, adopting analogue HD technology and featuring Full-HD video signal transmission via coax which is no latency, real-time, reliable, long-distance, cost-effective, and compatible with the existing CCTV system. Comparing with analogue D1 and HD-SDI, analogue HD performs longer transmission of up to 500M, and sends multi-signals via one coaxial cable, as well as delivering video with high resolution, image quality, and anti-interference ability. MESSOA’s new analogue 1080P series include Vari-focal IR indoor and outdoor dome, HID126 and HOD186, Fixed Eyeball Dome and Mini Bullet, HED110 and HCR170, vari-focal IR Bullet, HCR176, and 4 CH, 8 CH, 16 CH DVR, DVR104, DVR108, DVR116. The cameras come with CVBS outputs compatible with analogue D1 DVR, as well as the DVRs being compatible to analogue 1080P, 720P, and D1 cameras, which enable CCTV system upgrade without pains. Features Real-time and reliable system performance Long-distance transmission up to 500m Cost-effective and compatible system upgrade Remote management via web, CMS, and mobile app with DDNS complimentaryAdd to Compare
1/4 inch, Colour / Monochrome, 560 TVL resolution, 0.0004 lux, 0.1 ~ 90 o/ sec pan speed, Indoor/Outdoor, Digital (DSP), 0.1 ~ 45 o/ sec tilt speed, 24 V DC, 4.1 ~ 73.8, Back Light Compensation, Auto Gain Control, White Balance, 1/4 ~ 1/10,000 s, 50, Internal/Linelock, NTSC, Built-in IR LED, 1Vpp composite output, 75 ohm, x18, RS485, 46 W, 217 x 324, 3,800, -30 ~ +50 C (-22 ~ +122 F), 20 ~ 80, IP67Add to Compare
1/3 inch, Colour / Monochrome, 600 TVL resolution, 0.2 lux, Indoor, Digital (DSP), 12 V DC, 2.8 mm, Auto Gain Control, White Balance, 1/60 ~ 1/100,000 s, 50, Internal, NTSC, 1Vpp composite output 75 ohm, 1.5 W, 107 x 64, 300, -10 ~ +50 C (14 ~ 122 F), 0 ~ 90Add to Compare
1/3 inch, Colour / Monochrome, 700 TVL resolution, 0 lux, Digital (DSP), 12 V DC, 2.8 ~ 10.5 mm, Back Light Compensation, Auto Gain Control, White Balance, 1/60 s, Internal/Linelock, NTSC, Built-in IR LED, 1Vpp composite output, 75ohm, 5 W, 112 x 97, 400, -10 ~ +50 C (14 ~ 122 F), 0 ~ 90Add to Compare
1/3 inch, Colour / Monochrome, 700 TVL resolution, 0.01 lux, Digital (DSP), 12 V DC, 2.8 ~ 10.5 mm, Back Light Compensation, Auto Gain Control, White Balance, 1/60 s, 50, Internal/Linelock, NTSC, 1Vpp composite output, 75 ohm, 2.5 W, 112 x 97, 300, -10 ~ +50 C (14 ~ 122 F), 0 ~ 90Add to Compare
1/3 inch, Colour / Monochrome, 700 TVL resolution, 0.45 lux, Digital (DSP), 12 V DC, 3.7 ~ 12 mm, Back Light Compensation, Auto Gain Control, White Balance, 1/60 s, 50, Internal/Linelock, NTSC, 1Vpp composite output, 75 ohm, 2.5 W, 131 x 132 x 112, 750, -10 ~ +50 C (14 ~ 122 F), 0 ~ 90, IP66Add to Compare
1/3 inch, Colour / Monochrome, 700 TVL resolution, 0 lux, Indoor/Outdoor, Digital (DSP), 12 V DC, 3.3 ~ 12 mm, Back Light Compensation, Auto Gain Control, White Balance, 1/60 s, 50, Internal/Linelock, NTSC, Built-in IR LED, 1Vpp composite output, 75ohm, 5 W, 131 x 132 x 112, 750, -10 ~ +50 C (14 ~ 122 F), 0 ~ 90, IP66Add to Compare
1/4 inch, Colour / Monochrome, 560 TVL resolution, 0.0003 lux, 0.1 ~ 90 o/ sec pan speed, Indoor/Outdoor, Digital (DSP), 0.1 ~ 45 o/ sec tilt speed, 24 V DC, 3.5 ~ 98, Back Light Compensation, Auto Gain Control, White Balance, 1/4 to 1/10,000 s, 50, Internal/Linelock, NTSC, Built-in IR LED, 1Vpp composite output, 75 ohm, x28, RS485, 46 W, 217 X 324, 3,800, -30 ~ +50 C (-22 ~ +122 F), 20 ~ 80, IP67Add to Compare
1/4 inch, Colour / Monochrome, 560 TVL resolution, 0.0005 lux, 0.1 ~ 90 o/ sec pan speed, Indoor/Outdoor, Digital (DSP), 0.1 ~ 45 o/ sec tilt speed, 24 V DC, 3.4 ~ 122.4 mm, Back Light Compensation, Auto Gain Control, White Balance, 1/4 ~ 1/10,000 s, 50, Internal/Linelock, NTSC, Built-in IR LED, 1Vpp composite output, 75 ohm, x36, RS485, 46 W, 217 x 324, 3,800, -30 ~ +50 C (-22 ~ +122 F), 20 ~ 80, IP67Add to Compare
1/4 inch, Colour / Monochrome, 560 TVL resolution, 0.0005 lux, Digital (DSP), 24 VAC, 1/1 ~ 1/10,000, 50, Internal / Line Lock, PAL / NTSC, 1Vpp composite output, 75 ohm, 432x, 46 W, 216.6 x 324, 3,500, -40 ~ +60, 20 ~ 80, IP67Add to Compare
1/4 inch, Colour / Monochrome, 560 TVL resolution, 0.0005 lux, Digital (DSP), 24 V AC, Back Light Compensation, Auto Gain Control, White Balance, 1/1 ~ 1/10,000, 50, Internal / Line Lock, PAL / NTSC, 1Vpp composite output, 75 ohm, x312, 46 W, 216.6 x 324, 3,500, -40 ~ +60, 20 ~ 80, IP67Add to Compare
1/4 inch, Colour, 560 TVL resolution, 0.0005 lux, Digital (DSP), 24 V AC, Back Light Compensation, Auto Gain Control, White Balance, 1/50 ~ 1/10,000, 50, Internal / Line Lock, PAL / NTSC, 1Vpp composite output, 75 ohm, x216, 46 W, 216.6 x 324, 3,500, -40 ~ +60, 20 ~ 80, IP67Add to Compare
1/4 inch, Colour, 480 TVL resolution, 0.005 lux, Digital (DSP), 24 V AC, Back Light Compensation, Auto Gain Control, White Balance, 1/50 ~ 1/10,000, 50, Internal / Line Lock, PAL / NTSC, 1Vpp composite output, 75 ohm, x216, 46 W, 216.6 x 324, 3,500, -40 ~ +60, 20 ~ 80, IP67Add to Compare
1/3 inch, Colour / Monochrome, 540 TVL resolution, 0.08 lux, Fixed Focus, Indoor/Outdoor, Digital (DSP), 12 V DC, 3.7, Back Light Compensation, Auto Gain Control, White Balance, 1/60 ~ 1/100,000, 50, Internal, PAL, NTSC, 2 W, 100 x 67, -10 ~ +50, 0 ~ 90, IP66Add to Compare
The SDF418 has just been released. This compact dome camera has been designed to be one of the most flexible cameras in the entire MESSOA line up. A wide range of features help the camera obtain fluid, crystal clear images in low light conditions from either the indoors or the outdoors. Quick installation, 3-axis mount, AC line lock, and multi-language support make the SDF418 completely adaptable for any environment.Image enhancement features show images as clear as day in day or night, indoors or outdoorsThe SDF418 utilises a high-quality 1/3" Sony CCD to deliver 700 TV lines of high resolution images. Image processing capability is further enhanced by MESSOA's LumiiIII™ technology, which makes images sharper and clearer images than typical 700 TVL cameras. Furthermore, the versatile SDF418 is packed with light adaptive features, such as the digital wide dynamic range, backlight compensation and auto white balance. The SDF418 ensures you quality image in any light conditions.Image noise is reduced or completely goneUltra low light conditions are no match for LumiiIII. The SDF418 can decrypt images in light as low as 0.03 lux. Image noise is immediately cleared up using with Noise Reduction. Not only do images become clear, but the image size is also reduced. As a result, storage-space requirements and back-end costs are minimised.Achieve any view you want with 3-axis camera mountWith 3-axis mount support, any view angle is achievable. This offers flexible installation on a ceiling or wall even angled surfaces. The camera's pan, tilt and panoramic rotation capability makes it an ideal solution for wide-area surveillance.Dual voltage for flexible powerThe camera supports two types of power operation: 24V AC or 12V DC. The camera automatically adapts to whichever power source is used, making installation fast on any power system.Stops vandals and bad weather with a camera casing that is rated IP66 and IK10 impact resistanceBlunt objects and water don't even faze the SDF 418. The thick security glass and tough body are rated IK10 and can withstand an impact of 20 Joules meaning it can withstand baseball hats, hammers, and even some small arm hand guns. Neither man nor nature will affect the SDF 418.Add to Compare
1/3 inch, Colour / Monochrome, 700 TVL resolution, 0 lux, Indoor/Outdoor, Pendant, Wall mount, 24 V AC, 3.3 ~ 12, Back Light Compensation, Auto Gain Control, White Balance, 1/60 sec, > 50, Internal / Line-lock, NTSC, PAL, Built-in IR LED, 1 Vp-p, 75 Ohms, 5 W, 131 x 132 x 112, 750, -10 ~ +50, 0 ~ 90, Vandal Resistant, IP67Add to Compare
1/3 inch, Colour / Monochrome, 700 TVL resolution, PTZ, 0 lux, Wall, Ceiling mount, 12 V DC, 2.8 ~ 10.5 mm, Back Light Compensation, Auto Gain Control, White Balance, 1/60sec, > 50, Internal/Linelock, NTSC/PAL, 1Vpp composite output, 75ohm, 5 W, 112 x 97, 400, -10 ~ +50, 90Add to Compare
Browse CCTV Dome Cameras
Dome camera products updated recently
ISC West continues to innovate and adapt to the changing needs of the security marketplace. In 2019, there will be 200 new exhibitors, 100 new speakers and an expanding mix of attendees that includes more end users and international attendees. The International Security Conference & Exposition (ISC West) will be held April 10-12 at the Sands Expo in Las Vegas. Among the more than 200 new exhibitors on the show floor will be Dell Technologies, Resideo, SAST (a Bosch IoT startup), Belkin International, NetApp, Lenovo, Kingston Technology and many others. The event continues to see more and more solutions in the area of IoT/connected security, a surge in barrier/bollards exhibitors, an increased number of start-up companies, and an emphasis this year on stadium/major events security. Plus, the new exhibit area of ISC West, Venetian Ballroom, will include a mix of solutions from mid-sized domestic and international companies, and is the home of the Emerging Technology Zone – back for its second year with 50-plus start-up companies expected. The International Security Conference & Exposition (ISC West) will be held April 10-12 at the Sands Expo in Las Vegas “ISC West is no longer just about video cameras, access control systems and alarms,” says Will Wise, Group Vice President, Security Portfolio for Reed Exhibitions, which produces and manages ISC West. Embracing and stimulating the market dynamic of comprehensive security for a safer, connected world, solutions on display at the show reflect convergence across physical security, IT (information technology) and OT (operational technology). The ISC West expo floor includes specialised featured areas such Connected Home, Public Safety & Security, Connected Security, Unmanned Security Expo and the Emerging Technology Zone. Plus, complimentary education sessions in the Unmanned Security Expo theatre will include topics such as drones, counter-drone solutions, ground robotics and regulations/policies that support autonomous technology. This year’s event will feature more than 1,000 products and brands covering everything from video surveillance, access control and alarms/alerts, to IoT, IT/cybersecurity convergence, AI, embedded systems, drones and robotics, smart homes, smart cities, public safety and more. The ISC West expo floor includes specialised featured areas such Connected Home and the Emerging Technology Zone Elevating the Keynote Series Over the past few years, ISC West has elevated its Keynote Series (open to all attendee types) to include more speakers and dynamic content covering relevant topics. Attendees should be sure to head to the Keynote room Wednesday and Thursday mornings at 8:30 a.m. before the expo floor opens at 10 a.m. Relating to attendance, ISC West continues to diversify and grow the attendee universe by attracting additional enterprise government end-users across physical and IT/OT responsibilities. The show also continues to attract and grow the channel audience, and there will be an increasing number of International attendees. “Years ago, ISC West was known exclusively as a dealer/integrator/installer show, but not anymore,” says Wise. “Today, the demographic mix continues to evolve as the event diversifies its product and educational offerings, embracing the current market reality of collaboration among integrators/dealers/installers, end-user decision-makers, and public safety and security professionals.” When planning for the show, be sure to view the list of special events and take advantage of the additional connection-making opportunities Within the SIA Education@ISC West conference program, there are over 100 new speakers. Through ISC West’s strong partnership with the Security Industry Association (SIA, the Premier Sponsor of ISC), the SIA Education@ISC West program has expanded and become increasingly dynamic and diverse over the last three years. In addition, ISC West and SIA are hosting a Women in Security breakfast on Friday morning April 12th. Women in Security is a new track for the education program. “Our attendance data reflects the demand for a mix of physical security integrator and end-user content, a balance of technical and management/strategic topics, and diverse topics incorporating IoT and cybersecurity/physical security convergence, and analytics expertise,” says Wise. “Last year was a record year for conference program attendance, and 2019 will yet again set new benchmarks.” Mobile apps, information desks and ease of registration ISC West is also focusing on the attendee experience. Need advice on what exhibitors are a fit for your business needs and interests? The Information Desk adjacent to the main expo entrance will provide customised recommendations based on the information attendees provided during the registration process. Attendees can download the official ISC West mobile app and create a MyShow account through the ISC West website Attendees can download the official ISC West mobile app and create a MyShow account through the ISC West website to research exhibitors and product categories, receive exhibitor recommendations that best fit business needs, review complimentary educational opportunities as well as 85-plus sessions from the paid SIA Education@ISC program. There are many networking opportunities being offered at the show this year. When planning for the show, be sure to view the list of special events and take advantage of the additional connection-making opportunities. Whether attendees want to network with peers or customers at an awards ceremony (Sammy Awards, Fast 50, New Product Showcase Awards), Charity event (AIREF Golf Classic, Mission 500 Security 5K-2K Run/Walk), or an industry party (SIA Market Leaders Reception, ISC West Customer Appreciation Party at Tao), there are a variety of special events offered, all designed to help you make new connections. Make sure to check out the ISC West website for all the Special Events taking place at ISC West.
It had been a particularly slow night. The plant security guard had just made his rounds on this Sunday evening shift. As soon as he passed the weighing scales, he could enter the guard shack and get off his feet. Challenging a curious incident However, on this night, he noticed the waste vendor’s truck sitting half on and half off the scale. He stopped dead in his tracks to see if the truck would back up and completely sit on the scale. It never did. The observant guard walked up to the truck and challenged the driver who seemed surprised. “Hey, you’re not weighing your truck properly.” The driver fumbled for a response before replying, “Sorry, I was on the phone with a friend. I didn’t notice it.” But this security guard had the presence of mind to demand the driver’s phone. The driver was caught off guard and surrendered the phone. The guard then pulled up the most recent incoming/outgoing calls and saw no calls during the last 30 minutes. “I don’t think so.” “You don’t think so what?” The security guard was frank, “You haven’t used this phone in over half an hour.” The truck driver sheepishly acknowledged the fact. It was decided to install CCTV covering the weighing area and scales – no easy feat due to poor lighting Preventing crime as it happens Knowing the driver was lying, the security guard ordered the truck back on the scale for a correct weighing and advised the driver that he would report the incident. The security guard wrote up his report and handed it off to his supervisor who, in turn, contacted the local corporate investigator. This investigator was soon on the phone with his boss at corporate headquarters on the other side of the world. Together with Security, they decided to install CCTV covering the weighing area and scales – no easy feat due to poor lighting. However, once completed, they waited. They would not have to wait long. For the next two months, the waste vendor trucks, filled to the brim with production waste, black-and-white paper and other waste products from the plant, would stop on the scale only for a moment and then drive the front half of the truck off the scale for weighing. It was obvious that the vendor was cheating the company by only paying for half the waste. After two months, it was decided to catch the next cheating driver “en flagrante.” Sure enough, the next truck went half on and half off the scale and was weighed. Security then asked the unsuspecting driver to park his truck and invited him inside the building to talk to a supervisor. The driver signed an incriminating statement about the scheme and his role therein. They sent him on his way asking him to keep it quiet Waiting for the driver in a large office was the local investigator and his close friend, the Head of Security. After a difficult interview, the driver admitted to cheating on the scales over a two-year period—he claimed that some of the scale cheating was done at the direction of the vendor’s management, while some of it he did himself by “ripping off” the vendor—which he acknowledged was dangerous. Working with authorities The driver signed an incriminating statement about the scheme and his role therein. They sent him on his way asking him to keep it quiet—they would see what they could do for him later on. In the meantime, Corporate Investigations had received a due diligence report on the vendor company which contained disturbing news—the company and its managers were associated with a countrywide waste management mafia. The report suggested that the vendor had a reputation for thefts and involvement in numerous lawsuits regarding thefts and embezzlement. Shockingly, no prior due diligence had ever been conducted on the vendor. Fortunately, the plant’s finance and audit team had maintained good records over the past 5 years and were able to re-construct the amount of waste going out the plant door and the amounts being claimed and paid for by the vendor. The discrepancy and loss stood at a multi-million dollar figure. After consulting with the local police authorities and company lawyers, it was decided to pursue a civil case against the vendor. Pursuing legal action The regional lawyer, the Head of Investigations, the Head of Security and the CFO invited the vendor to discuss the problem. Some of the evidence was shown to the vendor’s CEO who became indignant and, in order to save face, promised to fire the truck drivers and to repay any losses for the last two months. Inter-dependent entities - security, investigations, finance/audit and legal - combined their resources and agendas to form a unified front That was not enough for the company and a protracted legal battle ensued which lasted several years and resulted in the vendor’s paying almost the entire amount in instalments. The vendor was dropped from the contract and internal controls strengthened—the only plant employee dealing with the waste issue left the company and was replaced by two individuals. The plant also began paying more attention to the waste process and less to the production side. Several “lessons learned” come to mind. First, the tripwire came in the person of an astute and well-trained security guard who exhibited some of the best characteristics you want to see from men and women in that profession. The Security Department was also adept at installing the CCTV and capturing the fraud live on videotape. But a far greater lesson was learned—of what can happen when inter-dependent entities (security, investigations, finance/audit and legal) within a company combine their resources and agendas to form a unified front. The results speak for themselves.
Critical infrastructure facilities that must secure large areas with extended outer boundary and numerous entry points, present a particularly difficult challenge when it comes to perimeter protection. As such, true end-to-end perimeter protection calls for the utilisation of a sophisticated, multi-layered solution that is capable of defending against anticipated threats. Integrated systems that incorporate thermal imaging, visible cameras, radar and strong command and control software are crucial for covering the various potential areas of attacks. Let’s look at these technologies and the five key functions they enable to achieve an end-to-end solution that provides intrusion detection, assessment and defense for the perimeter. 1. Threat recognition The first step in effectively defending against a threat is recognising that it’s there. By combining state-of-the-art intrusion detection technologies, facilities can arm themselves with a head start against possible intruders. An exceptionally important aspect of effective perimeter protection is the ability to conduct 24-hour surveillance, regardless of weather conditions, environmental settings, or time of day. Visible cameras do not perform as well in low light scenarios and inclement weather conditions. However, thermal imaging cameras can provide constant protection against potential intruders, regardless of visual limitations, light source or many environmental factors. In fact, facilities such as power stations located near bodies of water can use thermal cameras to create what is known as a “thermal virtual fence” in areas where they are unable to utilise the protection of a physical fence or wall. Deterring suspicious activity can be achieved through real-time two-way audio, a simple but powerful tool Critical infrastructure applications require not only continuous video surveillance and monitoring, but also a solution that yields highly reliable intrusion detection, with fewer false alarms. This need makes advanced video analytics a must for any adequate surveillance system. Features like dynamic event detection and simplified data presentation are game changing in supporting accurate intrusion analysis and facilitating a proactive response. Advanced analytics will provide multiple automated alarm notification options, including email, edge image storage, digital outputs or video management software (VMS) alarms. Incorporating high quality, unique and adaptive analytics can virtually eliminate false alarms, allowing security personnel to respond more efficiently and effectively, while also lowering overall cost for the end user. While surveillance technologies such as radar, thermal imaging and visible cameras, or video analytics work well on their own, utilising all of these options together provides an advanced perimeter detection system. For example, ground surveillance radar can detect possible threats beyond the fence line as they approach and send a signal to pan-tilt-zoom (PTZ) cameras, triggering them to slew to a specific location. From there, embedded analytics and visible cameras can further identify objects, notify authorised staff, and collect additional evidence through facial recognition or high-quality photos. 2. Automatic response systems Once an intrusion attempt is discovered, it is important to act fast. Organising a response system that can initiate actions based on GPS location data, such as the slewing of PTZ cameras, automated intruder tracking or activated lighting sensors, greatly increases staff’s situational awareness while easing their workload. For instance, thermal imagers deployed in conjunction with video analytics can be used to generate an initial alarm event, which can then trigger a sequence of other security equipment and notifications for personnel to eventually respond to. Having all of this in place essentially lays the entire situation out in a way that allows responders to accurately understand and evaluate a scene. Power stations located near bodies of water can use thermal cameras to create a “thermal virtual fence” in areas where they are unable to utilise the protection of a physical fence or wall 3. Deterring suspicious activity After the designated auto-response mechanisms have activated and done their job, it is time for responders to acknowledge and assess the situation. From here, authorised personnel can take the next appropriate step toward defending against and delaying the threat. Deterring suspicious activity can be achieved through real-time two-way audio, a simple but powerful tool. Often, control room operators can diffuse a situation by speaking over an intercom, telling the trespasser that they are being watched and that the authorities have been notified. This tactic, known as ‘talk down’, also allows officers to view the intruder’s reaction to their commands and evaluate what they feel the best next step is. If individuals do not respond in a desired manner, it may be time to take more serious action and dispatch a patrolman to the area. 4. Delay, defend, dispatch and handle The possible danger has been identified, recognised and evaluated. Now it is time to effectively defend against current attacks and slow down both cyber and physical perpetrators’ prospective efforts. Through the use of a well-designed, open platform VMS, security monitors can manage edge devices and other complementary intrusion detection and response technologies, including acoustic sensors, video analytics, access control and radio dispatch. A robust VMS also enables operators to control functions such as video replay, geographical information systems tracking, email alerts and hand-off to law enforcement. With the right combination of technologies, facilities can take monitoring and evidence collection to the next level The primary purpose of the delay facet of the overall perimeter protection strategy is to stall an attempted intrusion long enough for responders to act. Access control systems play a key role in realising this objective. When a security officer sees a non-compliant, suspicious individual on the camera feed, the officer can lock all possible exits to trap them in one area all through the VMS. 5. Intelligence: Collect evidence and debrief More data and intelligence collected from an event equals more crucial evidence for crime resolution and valuable insight for protecting against future incidents. With the right combination of technologies, facilities can take monitoring and evidence collection to the next level. One innovative resource that has become available is a live streaming application that can be uploaded to smart phones and used for off-site surveillance. This app gives personnel the power to follow intruders with live video anywhere and allows operators to monitor alarm video in real-time. Geographic Information System (GIS) maps are computer systems utilised for capturing, storing, reviewing, and displaying location related data. Capable of displaying various types of data on one map, this system enables users to see, analyse, easily and efficiently. Multi-sensor cameras, possessing both visible and thermal capabilities, provide high-contrast imaging for superb analytic detection (in any light) and High Definition video for evidence such as facial ID or license plate capture. Integrating these two, usually separated, camera types into one helps to fill any gaps that either may normally have. Still, in order to capture and store all of this valuable information and more, a robust, VMS is required. Recorded video, still images and audio clips serve as valuable evidence in the event that a trial must take place to press charges. Control room operators can use data collection tools within their VMS to safely transfer video evidence from the field to the courtroom with just a few clicks of their mouse. More advanced video management systems can go a step further and package this data with other pertinent evidence to create a comprehensive report to help ensure conviction.
Digital Watchdog (DW™), the industry leader in digital recorders, surveillance cameras and related management software, announces the release of the latest update for DW Spectrum™ IPVMS. The new v2.5 software adds powerful new features including a bookmarks engine and storage backup, performance improvements and improved support for multi-sensor cameras. Easy approach to HD surveillance DW Spectrum IPVMS is an elegantly easy cutting-edge approach to HD surveillance, addressing the primary obstacles and limitations of managing enterprise-level HD video while offering the lowest total cost of deployment and ownership of any solution on the market. The software offers advanced search features to help you quickly find incidents or instantly review an exact date and time. The software is cross-platform, installs quickly and provides instant network mapping and discovery to start viewing your entire security system in minutes. DW Spectrum IPVMS is a perfect solution for any application that requires ease, speed, efficiency, and unprecedented image quality. “With the timely release of DW Spectrum 2.5, it continues to deliver unprecedented return on investment without the need for an annual maintenance agreement.” said Patrick Kelley, Director of IP Sales – North America, Digital Watchdog. “These new features are seamlessly incorporated into the DW Spectrum user interface, providing a dramatically easier user experience for all user levels than any other video management solution on the market.” DW Spectrum™ IPVMS features: New Mobile Apps - Brand new cross-platform mobile apps for iOS and Android with better performance, revamped design and consistent user experience across both Apple iOS and Google Android devices. Bookmarks - Users can create bookmarks for specific segments of archived video with names, descriptions, and tags either manually or via the Rules & Events engine. Storage Backup - Users can now set up scheduled or real-time archive backup of high-res, low-res, or all streams from selected cameras to local, NAS, or even cloud-based storage locations (e.g. ftp sites, Amazon Prime Storage, etc). PTZ Preset as an Action - Users can now set up rules to trigger a PTZ preset as an action (e.g. create a motion event on a fixed camera that triggers the PTZ to look at the spot where motion occurred). Alarm Layout - allows users to set display-camera-on-Alarm-Layout as an action (aka pop-up video on alarm). Live Video Text Overlay - allows users to create custom text overlays-as-an-action (including Generic Event API). New device support: Axis F44 Main Unit Axis Q6000E panoramic camera ACTi V23 4 Channel Encoder (with I/O Support) Messoa IP Cameras (with I/O Support) Hikvision DS-6704HFI 4 Channel Video Server Implemented "Advanced" Settings for DWC-BVI2IR cameras Improved support for DWC-PZV2M72T cameras Vista VK2-1080XVRDPTPMF camera now mapped for advanced PTZ Arecont RTSP camera support implemented Digital I/O support for Arecont cameras implemented Improvements to management software: Added "Connect" button to the "Test" dialogue during dialogue Updated viewing cell icons and improved styling for "info" data Calendar widget can now be pinned Added layout background support for video wall Transcoding is now enabled by default for video export from multi-sensor cameras (e.g. DWC-PZV2M72T) Added warning before export if export will result in video downscaling (applies only to very high resolution or multi-sensor cameras) "Timeline mode" renamed to "Time Mode". Change can be seen in timeline, timestamps in Event Logs, Audit Trail and Bookmark Log Added ability to sort Alarm/Event Rules by any column Improved "Server Settings" and "System Administration" dialogs - now changes can be applied without closing dialog Storage Analytics improvement - storage utilised by deleted/moved out cameras is displayed separately Storage usage optimisations and improvements Improved time synchronisation mechanism between Servers Improved error messages for some cases of push updates failure "Free Storage Space" is increased from 5Gb to 50Gb for NAS Server SSL can now be disabled API documentation is improved and extended General Server stability improvements based on anonymous usage and crash statistics
The shopping District, or Shoutengai, in Koto-Ku, Tokyo is located next to a busy train station that gathers many restaurants, shops, and sake bars together in this newly vibrant neighbourhood. As the area becoming more commercially alive, there was an increasing concern for crimes taken place within the district, especially during late nights. For the purpose of crime prevention, the Shopping District Association began to consider deploying surveillance cameras at the crime hot spots as a way to strengthen the public safety in the neighbourhood. Yet with its limited finances, the association had to look for an effective solution at a lower cost that would cope with its tight budget. Solution With the help from MESSOA, more than 60 Maven series NCR365 IR bullet cameras and a dozen of NOD385 IR dome cameras were introduced in this project. Equipped with a 3MP CMOS sensor and removable IR-cut filter for 24/7 monitoring, these cameras deliver exceptional image quality for accurate identification at crime-prone spots. Both cameras support onboard memory with microSD card slot that utilises edge recording technology. Up to 64GB of HD quality CCTV footage can be recorded locally on each camera without the need of installing NVRs, saving a significant amount of installation costs. Structure-wise, both the NCR365 and NOD385 are IP67 certified, featuring built-in heater and weatherproof enclosure to ensure the cameras are capable of withstanding any harsh environments in Japan, particularly in winter times. Result By utilising the edge-based recording technology, the whole project eliminated the need for a centralised recording server or storage, helping the association saving a great deal of costs as planned. This solution did not compromise reliability thanks to SD card’s solid state without any moving parts like a hard drive. The files can be securely stored and easily retrieved when needed. The motorised lens with auto focus of the NCR35 provided benefits to the project as well by drastically facilitating the time-consuming installation. Technicians were able to get the job done fast with easy by taking advantage of remote configuration with simple mouse clicks. The simplified set up cut the installation process short and saved lots of labour costs as result.
Partnership comes fresh on heels of Messoa’s exhibition of its latest HD IP cameras specifically designed for ALPR at IFSEC 2015 PlateSmart automatic license plate recognition (ALPR) software-only solutions are known for working with cameras across the spectrum of the security industry. Messoa, one of the security industry’s premier video camera manufacturers, has consistently produced cameras that work effectively with PlateSmart’s products, making for a strong and productive association. The relationship between the two companies has now been cemented by recently joint announcement that PlateSmart and Messoa have entered into an official integration partnership agreement. Messoa’s HD IP cameras for ALPR applications at IFSEC 2015 The announcement comes fresh on the heels of Messoa’s successful exhibition at IFSEC 2015 in London, where it displayed its latest models of high-definition IP cameras specifically designed for ALPR use. Among the cameras on display was a model boasting 3 megapixels of resolution in addition to headlight suppression, built-in infrared (IR) illumination, and other features conducive to excellent ALPR performance. Pairing of PlateSmart’s HD ALPR engine with Messoa’s HD cameras In addition to the high-quality product offerings from both companies, the effectiveness of the PlateSmart-Messoa combination springs from the pairing of PlateSmart’s high-definition (HD) ALPR engine with Messoa’s HD cameras, which enables users to cover a wider area and capture multiple plates with only a single camera. According to PlateSmart CEO John Chigos, the partnership with Messoa fits perfectly with the Company’s market philosophy. “PlateSmart has always made a point of choosing best-of-breed channel partners,” he says. “With Messoa, we are able to offer our customers everything they could want in license plate recognition. Messoa gives them a fantastic video image while PlateSmart gives them our unparalleled accuracy, flexibility, and data integrity protection.” “We are very excited about the partnership with PlateSmart”, said Allan Lee, President of MESSOA Technologies Inc. “With the integration of MESSOA CatchAll™ engine and PlateSmart HD LPR engine, it makes the state-of-art LPR solution obtainable and affordable, which ultimately benefits to the public safety as well as increases management effectiveness for applications in need of LPR solution such as parking lots, campus and schools, for example.”
Five things to consider for AI with video technologyDownload
OSDP is the strongest access control for your businessDownload
Preparing your organisation with quality situational awarenessDownload
- Sony 4K security cameras are the ‘intelligent eyes’ at Amsterdam’s iconic EDGE Olympic
- Belgian police install high-end Full HD Sony 4K surveillance cameras to secure streets and fight crime in Lokeren
- TCA installs Panasonic CCTV cameras with ClearSight coating, saving thousands of Euros
- Hanwha Techwin’s Wisenet cameras and NVRs provides safety for patients at the Norfolk and Suffolk NHS Foundation Trust