Axis Communications CCTV Digital Video Recorders (DVRs)(1)
AXIS 262+ NVR is a network-based video recorder, compatible with all Axis JPEG products with firmware 3.15 or higher.It contains a 250 GB HDD for storing e.g. 13 days of VGA @ 1fps, 8 channels (20kbyte) of high quality video with no quality degradation compared to the original image from the camera or video server. It has a recording speed of 120 frames per second at VGA and has a 250 GB hard disk with Anti-Vibration. It comes with feature like support for scheduled, manual and triggered recordings. Take advantage of your network by implementing an Axis surveillance system.AXIS 262+ NVR offers together with their cameras and video servers the customer a complete surveillance solution where one manufacturer guarantees all functions and compatibility.Key features:Records from up to eight network video cameras with Megapixel resolution Simultaneous recording, live viewing and playback of recorded images Easy to install, use and manage Records up to 120 frames per second at VGA or 4CIF Remote access to recorded material as well as to live cameras 250 GB hard disk with Anti-VibrationAdd to Compare
Browse CCTV Digital Video Recorders (DVRs)
- Axis Communications
Digital video recorder (DVR) products updated recently
In today’s market, efficient use of bandwidth and storage is an essential part of maintaining an effective video surveillance system. A video management system’s ability to provide analysis, real time event notifications and crucial image detail is only as a good as the speed and bandwidth of a surveillance network. In the physical security industry, H.264 is the video compression format used by most companies. Some companies also employ H.264 enhancements to compress areas of an image that are irrelevant to the user at a higher ratio within a video stream in order to preserve image quality for more important details like faces, license plates or buildings. The H.265, H.264’s successor, will be increasingly used for compression in the future. Some companies are already using H.265 in their cameras and video management systems, while a host of other manufacturers are certainly preparing for its broader adoption in the years to come. Video compression technologies Reduced bandwidth and storage requirements are the primary benefits of video compression technologies Reduced bandwidth and storage requirements are the primary benefits of video compression technologies. In some cases, H.265 can double the data compression ratio of H.264, while retaining the same quality. Increased compression rate translates into decreased storage requirements on hard drives, less bandwidth usage and fewer switches – all of which reduce overall costs of system ownership. H.265 compression delivers a lower bitrate than H.264, which is relevant to end users and integrators because the lower bitrate reduces strain on hardware and can reduce playback issues. It’s very important that the compression format that is used is supported in all of the different components of a system: cameras, desktop computers on which the VMS is running and the VMS itself. It is also good for end users and integrators to understand the basics of video compression. Having a basic understanding of compression allows users to tweak settings to reduce bandwidth usage even more. Many cameras come with default settings that can be changed to ultimately reduce costs. ONVIF physical security In the physical security industry, ONVIF is working to incorporate into its specifications the use of new formats such as H.265 but is not directly involved in developing the compression standards themselves. With Profile T, the new ONVIF video profile released will employ a new media service that is compression agnostic. This means that it can support new video compression formats, including H.265, as well as new audio compression formats, with the ability to include new video and audio codecs as needed in the future without having to redesign its media service. In the physical security industry, ONVIF is working to incorporate into its specifications the use of new formats such as H.265 Standardisation organisations that are directly addressing new compression standards include the International Telecommunication Union (ITU), the Moving Picture Experts Group (MPEG) and a joint commission of the International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC), which is addressing the coding of audio, picture, multimedia and hypermedia information. Other compression formats on par with H.264 and H.265 are being developed by companies such as Google. H.265 compression formats Using products that employ H.265 compression will reduce costs through bandwidth reduction, as will changing default settings on cameras, which are often conservative. Having a basic understanding of compression formats and how to tweak camera factory default settings also gives integrators the ability to further reduce bandwidth for added costs savings and increased system performance. These enhancements will analyse which parts of an image are most important and adjust local levels of compressions accordingly It is also worth noting that H.265 enhancements will likely be developed by camera manufacturers to further reduce bandwidth, as was the case with H.264. These enhancements will analyze which parts of an image are most important and adjust local levels of compressions accordingly. While H.265 itself is ready for prime time, its value as a tool for IP-based surveillance systems is dependent on support for the codec in all parts of the system – the VMS, server hardware, graphics cards and camera. Though widespread H.265 adoption is predicted, providers of these components are jumping on the H.265 bandwagon at different rates of speed. ONVIF is including support for H.265 in its new video profile, Profile T, because it believes it will become the most widely used compression format and ONVIF recognises the need to anticipate that migration as a future need of the industry. The new media service, which will be implemented with Profile T, will be future-proof in that when new compression formats are released in the future, ONVIF can adopt them very quickly. That flexibility will definitely help integrators.
According to IHS Market, it is estimated that there are over 60 million security cameras in the United States, and other reports say these cameras capture more than four billion hours of footage per week. Over the last decade, IP camera technology has dominated the conversation as it has provided users with a broad offering of enhanced image quality and features. With a large percentage of existing security systems relying on analogue, many end users looking for high definition (HD) video quality have been forced to take on a complete system overhaul. Infrastructure overhaul for HD video To make the switch, customers would need to change everything, from cameras to hardware to wiring– not to mention the lengthy installation process that would ensue. IP cameras also require higher Internet speeds and more cloud space. Whether constrained by budget, bandwidth or storage, many end users have been unable to adopt this new video surveillance method.Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike. By utilising the current Coaxial cables, this offering yields high definition video, while requiring minimal infrastructure changes and is an optimal surveillance choice for security customers. Plus, with new advancements and updates being made frequently to this technology, there is a solution for every security need. The enhanced alternative of HD over Coax has been warmly welcomed in the security industry, thanks to its simple solutions and ever-evolving features. Many new analogue HD cameras are “plug and play,” able to connect directly to existing Coaxial cables. This eliminates the need for a complete system change, creating cost-savings for the end user and an enhanced video quality offering. Easy solutions for HD video As a result, integrators can cost-effectively upgrade their customer’s surveillance solution while using their legacy infrastructure, making it an attractive option for end users and an easy sell for dealers. Latency in video is another common issue with network-based camera systems, where even the slightest delay in video surveillance can hinder security response HD over Coax cameras themselves are always expanding and evolving to meet a wide array of security needs. With the introduction of fisheye and multi-sensor cameras, users now have a multitude of coverage options, not to mention the introduction of 4K bringing resolution options to the same level as IP. Some newer technologies are even touting 4K cameras paired with 4K digital video recorders (DVRs) made specifically for analogue systems. Longer cables grant transmission for up to 1600 feet, double the distance of standard analogue solutions, and triple that of IP systems. This single cable is able to transmit both HD video and audio. Recently, broadcast quality audio over Coax has become available in limited models, a substantial improvement over older analogue technology, which was unable to transmit audio. Stopping video delay Latency in video is another common issue with network-based camera systems. Even the slightest delay in video surveillance can hinder security response. IP cameras are forced to compress and packetise their video for transmission. The outcome of this is a reduced number of images per video, which in turn causes delay. HD over Coax on the other hand, delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity. Additionally, the point-to-point transmission delivers uncompressed video free of lag. Another touted benefit is that, unlike IP networked cameras, analogue systems provide a more secure video transmission. With so much sensitive information housed on a businesses’ network, adding another point of network access through an IP camera can create concerns for cyber security risks. HD over Coax delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity Preventing network hacking With HD over Coax, the physical connections between the camera and DVR prevent network hacking. By keeping the video surveillance system offline, security professionals are able to direct their attention to the physical threats at hand, rather than having to focus on deterring cyber security risks. One of the primary difficulties of deploying HD video solutions is the fact that many older systems utilise a wide variety of HD standards and platforms. To make matters more complicated, after HD over Coax was brought to market, manufacturers raced to create their own version of this technology. Today, the most popular proprietary standards are HD-CVI, HD-TVI and AHD. However, integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible.Integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible Diversifying surveillance through one DVR To combat these issues, manufacturers have introduced products with more flexibility to their portfolios. One example of this is the penta-brid DVR which grants the ability to seamlessly integrate multiple technologies deployed across one application. This means that systems with diverse camera brands and technologies, such as a mix of HD-CVI, HD-TVI, AHD, analogue or IP, can be connected through one DVR. For many end users with legacy analogue systems, penta-brid DVRs give them greater freedom to choose between a variety of solutions, rather than being limited to one option. With video resolution increasing, the space needed to store the footage is similarly rising. Penta-brid technology has been able to adapt to these evolving needs, giving users ample storage space to house the HD and 4K surveillance video with some of the newest models including H.265 compression. HD casino surveillance made simple For casinos, HD images are critical for identifying unauthorised personnel and unlawful behaviours to create a safe environment for guests and staff While HD over Coax is beneficial to many end users and integrators, those in the casino and hospitality markets find it crucial. With a combination of high profile guests, large amounts of cash on hand, constant crowds and strict industry regulations, reliable video surveillance is a must. Deploying new IP systems comes at a stiff price. When looking to upgrade their video surveillance, casinos must also be mindful of the installation process. When moving to an IP-based system, ripping out old wires and replacing them with new is the standard practice. This practice can be both disruptive and costly, not to mention gaming regulations require casino activities be monitored at all times so a complete system shutdown would result in revenue loss. This cost can be hard to justify, especially when the current legacy analogue system remains in working condition with only the lower image resolution to date it. For these scenarios, the most cost-effective option is to leverage the legacy infrastructure, replace the existing cameras with new devices, and reap the benefits that HD video has to offer without any lapse in security. For casinos, HD images are critical for identifying unauthorised personnel and unlawful behaviours to create a safe environment for guests and staff. HD over Coax cameras now offer the same resolution as IP cameras with a plug and play approach, that cuts down on expense without sacrificing quality. For businesses and applications that are unable to adopt IP technology, whether it be cost or time prohibitive, HD over Coax now features most of the same benefits IP has to offer without breaking the bank. By providing clear images in real time, maximising existing infrastructure, and affording cyber security benefits, HD over Coax provides an attractive solution for many end users and integrators.
Dollars spent by video surveillance customers must go towards ensuring high-availability capture, storage and on-demand access to live and archived video. Reaching this goal mandates high-availability of independent components – camera, network, storage (edge, external), internet connectivity, display, all Video Management Software (VMS) components and an architecture that can take advantage of this. In this note, we focus on seeing our way through to a video surveillance architecture, that provides high availability storage, access to live and stored video content. Of all options available to store recorded video, edge recording is the only one that is unaffected by network failure Edge recording Of all options available to store recorded video, edge recording is the only one that is unaffected by network failure. This makes edge storage a must-have. But, this has some limitations at present: Edge storage capacity is limited. Edge media has a short lifetime, rated only for thousands of hours of continuous recording. Most cameras are not secure and physical damage to the camera could lead to catastrophic loss of edge stored content. As storage and compression technology evolve, the constraints imposed by (1) and (2) could go away. However, securing cameras will continue to be a barrier for most installations. Secure external storage It is thus imperative to also store video in secure external storage. Such an architecture uses edge storage to fill in content gaps created by network, external storage outages. As edge storage technology improves, larger gaps can be filled in, but one will always need external storage. By our definition, ‘external storage’ is a solution stack that includes storage media and all software (including VMS) that provide access to this storage. Access to live and archived video Access to live video can either be met by external storage or directly by the camera Every surveillance solution needs to provide access to live and archived video. Access to live video can either be met by external storage or (and) directly by the camera. All things being equal, having the camera directly provide live video access, is a higher-availability solution. There is dependence on fewer components in the chain. Solutions in the market use one of the above two approaches for access to live video. Due to limited capacity and low physical security of edge storage, it makes sense at present, to have external storage meet all requests for archive video. Thus, we are led to an architecture that has heavy dependence on external storage. Dual-recording For high-availability, external storage must be architected with redundancy. Ideally, independent components that make up external storage – storage media, associated hardware and software (including VMS components), should be individually redundant and have smart interconnectivity. However, solutions in the market rigidly tie these components together. Failure of a single component causes failure of external storage. For e.g. hardware failure of a server causes VMS component failure AND storage failure. DR provides a smart way to provide high-availability for external storage For these solutions in the market, high-availability is achieved by having additional external storage units that step-in during outages of primary units. If these additional units continuously duplicate primary units, access gaps are minimised, and archive access is un-affected during primary unit outages. This is the idea behind Dual-Recording (DR). To meet cost budgets, these additional units can be configured to store subsampled (framerate, resolution) video content. A small number of additional units can support concurrent outages of all primary units. A few-to-many redundancy. Rising need for dual-recording Most cameras cannot be physically secured, and video content produced by a camera must be stored externally. Many VMS solutions use external storage to service live video access requests. Edge storage limitations impose restrictions on edge archive access at present. So, external storage is used to service requests for archive access too. Thus, a surveillance system ends up being over-dependent on external storage. DR provides a smart way to provide high-availability for external storage. As edge storage improves, it will be able to service archive access requests. VMS software will need to evolve, to use this capability smartly.
Siklu, the pioneer in 5G mmWave wireless network solutions, announced that its radios have been deployed in the City of Cambridge, located roughly 100km West of Toronto in Ontario, to provide outdoor video security and support potential public Wi-Fi network services. The city has fibre connections connecting several municipal buildings and continues to deploy more where it makes economic sense. Fibre is used to connect fire stations to City Hall, for example. However, this particular application, outdoor video security, was one that needed more flexibility to accommodate the necessary camera locations. Most parking lots, Intersections and pedestrian walkways do not have a fibre POP (‘point of presence’) nearby. This meant the answer would almost certainly have to be a wireless solution. Need of flexible video security solution The wireless network would need to be able to backhaul gigabit per second public Wi-Fi APs with no additional truck rollsThe solution to be chosen had several additional requirements. It needed to be flexible when it came to expanding the video security coverage, it had to be secure and it also had to have enough capacity that it could support additional high bandwidth applications, such as the deployment of Public Wi-Fi. The wireless network would then need to be able to backhaul gigabit per second public Wi-Fi APs (‘access points’) with no additional truck rolls. The successful bidder on the project was Alliance Security Systems. Alliance investigated 5 GHz solutions as well as 60 GHz and determined that only 60 GHz products could meet current and future requirements. The ‘EtherHaul 600’ point-to-point 60 GHz solution from Siklu features plenty of capacity (from 100Mbps up to 1Gbps, software upgradeable), flexible deployment options (up to 1km “link” range), small size (mountable on street light poles) and immunity to radio interference (e.g., 5 GHz systems are subject to the ever increasing Wi-Fi noise floor). Deployment of P3717 multi-lens cameras Phase 1 of the program supported ten multi-lens camera deployments, and the network design had six 1-Gbps Siklu V-Band radios collocated at the city Clock Tower. This dense colocation was a result of the very narrow 60GHz radio beams and the abundant spectrum (14GHz) available. Deployment of the Siklu radios was accomplished within a week and incorporated an Axis Communications P3717 multi-lens cameras managed by a Genetec Security Center unified security platform. Since the installation of the video security network, a car theft ring was apprehended and there has been a reduction in crimeTom Hackett, Alliance Security Systems stated: “By utilising the point to point technology in such a way where we co-locate the head end, we end up approaching a cumulative speed of over 10Gbps per second once Phase 2 is commissioned. That’s just an astounding wireless speed in today’s world. The network has been such a success that beyond expansion plans with Cambridge, we are in discussions with other municipalities.” Reduction in crimes The City also operates the Phase 1 network to provide access to police as requested for specific incidents or investigations. Since the installation of the video security network, a car theft ring was apprehended and there has been a noticeable reduction in crime. Beginning in June 2019 or as soon as light poles become available, Phase 2 will add seven new cameras and will be supported by Siklu’s V-Band ‘EtherHaul 600’ radios. The EtherHaul 600 units feature 1 Gbits of capacity and can accommodate future expansions of the system. “The network was installed and is delivering in all aspects – high up time and excellent video quality,” said Trevor McWilliams, Manager of Business Development for the City of Cambridge Ontario Economic Development. “We are confident that the network deployed will operate for many years and be able to support new applications as needed.”
The Security Industry Association (SIA) has named Sen. Amy Klobuchar (D-Minn.), Sen. Deb Fischer (R-Neb.) and Rep. Donald Payne, Jr. (D-N.J.) as the 2019 recipients of the SIA Legislator of the Year Award. The awardees will be honoured at the upcoming SIA GovSummit, taking place June 26-27 in Washington, D.C. The SIA Legislator of the Year Award is presented annually to members of Congress and other elected officials who have demonstrated extraordinary leadership in advancing legislation and policies that encourage the effective use of technology solutions to enhance public safety and security and protect critical infrastructure. Recognition for promoting workforce development Sen. Fischer recently recognised SIA, along with SIA member companies Intel and VMware, as supporters of the DIGIT ActWith this award, Sen. Klobuchar will be recognised for her leadership on workforce development and life safety issues important to the security industry and its mission. In 2019, Klobuchar authored S.379, a bill that would allow workers to use “529” education savings accounts for training and credentialing programs, and S. 481 – the Nicholas and Zachary Burt Memorial Carbon Monoxide Poisoning Prevention Act – which would provide grant assistance for the purchase and installation of carbon monoxide detectors in dwelling units of low-income families and elderly persons, child care facilities, public schools and student housing owned by public universities. Sen. Fischer authored bipartisan legislation that would convene a working group of federal entities and private-sector stakeholders tasked with providing recommendations to Congress on how to facilitate the growth of connected Internet of Things (IoT) technologies. S. 1611, also known as the Developing and Growing the Internet of Things (DIGIT) Act, calls for the United States to craft a national strategy to position the United States as the global leader in IoT technologies. Sen. Fischer recently recognised SIA, along with SIA member companies Intel and VMware, as supporters of the DIGIT Act. Installing vehicular barriers to mitigate attacks Rep. Payne, who serves as chairman of the House Homeland Security Subcommittee on Emergency Preparedness, Response and Recovery, recently introduced H.R. 2160 – the Shielding Public Spaces From Vehicular Terrorism Act – which would help communities leverage homeland security grants to install vehicular barriers and implement other protective measures and direct research and development efforts on the emerging threats from vehicular attacks. Rep. Payne recently introduced H.R. 2160 – the Shielding Public Spaces From Vehicular Terrorism Act Payne also crafted H.R. 6920, the School Security Is Homeland Security Grant Act, which clarified allowable uses, requires a percentage of homeland security grants to be used for enhanced school security measures and increases overall authorisation for the grants. Enhancing perimeter and school security “SIA’s policy priorities include notable measures that help increase safety and security across many sectors, including the critical areas of perimeter security and school security, while helping the industry to stay ahead of megatrends such as the proliferation of IoT and the recruitment and retention of qualified workers,” said SIA CEO Don Erickson. “SIA applauds Sen. Klobuchar’s work to promote the 21st-century technology workforce essential to our industry, Sen. Fischer’s leadership in recognising the security industry’s role in fostering IoT growth, and Rep. Payne’s contributions to mitigating the threat of vehicular attacks and protecting students, staff, faculty and visitors in our nation’s schools.” Session on physical access control systems SIA GovSummit – the annual government security conference hosted by SIA – brings together government security leaders and private industry technologists for top-quality information sharing and education on security topics affecting federal, state and even local agencies. Attendees will find specialised sessions on topics such as modernising federal physical access control systems Attendees will find specialised sessions on topics such as modernising federal physical access control systems, the U.S. Department of Defense’s unified facilities criteria for security systems, facial recognition technology use for public safety and homeland security missions and helping communities protect religious institutions, crowded spaces and other soft targets. SIA GovSummit is free for all government employees, including federal, state, county and municipal-level staff (both domestic and international), plus all military, law enforcement and public safety representatives. Sponsors of the event This event is made possible thanks to the following sponsors and partners: Premier Sponsors LenelS2, HID Global, Tyco Security Products and Allegion; Event Sponsors AMAG Technology, American Fuel & Petrochemical Manufacturers, Axis Communications, B&B Roadway Security Solutions, Calpipe Security Bollards, the U.S. Department of Homeland Security Science and Technology Directorate, dormakaba, Gallagher, Genetec, Gibraltar, GSA Schedules, Inc., Hanwha Techwin America, HySecurity, IDEMIA, Identiv, ISC Security Events, Louroe Electronics, Marshalls, Milestone Systems, the National Initiative for Cybersecurity Careers and Studies, NetApp, Panasonic, the Secure Worker Access Consortium and TCP Security Solutions.
SimonsVoss Technologies GmbH, part of the Allegion group - a pioneer in digital locking and physical access control systems - enters a technology partnership in Europe with Morphean. The new technology partnership, that will utilise SimonsVoss’ digital access control system SmartIntego, extends Morphean’s cloud-based capabilities beyond video surveillance and into the access control-as-a-service (ACaaS) market, forecast to reach US$2.8b by 2024. Integrated security system We are seeing considerable growth in demand for wireless locks" The secure Morphean platform informs decision making and drives efficiencies for organisations by generating unique and actionable insights from a multitude of data sources. The combination of an integrated security system hosted in the cloud that now combines video surveillance and access control promises not only greater security with two factor authentication but also a wealth of rich data. This will help businesses optimise operations and processes, such as by gaining greater insight into customer and employee behaviours or how office space is utilised. Martyn Ryder, VP Sales & Marketing at Morphean says, “We are seeing considerable growth in demand for wireless locks so we welcome this timely agreement to partner with SimonsVoss. This will allow us to extend our current access control offering and meet growing market and customer demand for both wired and wireless locking solutions via our cloud managed access control solution. The powerful combination of video security and access control as-a-service will bring many operational and business benefits for our customers across Europe and beyond.” Access control data The advance of smart cities, a more stringent regulatory environment and rising crime rates are some of the factors behind the appeal of ACaaS and outsourcing access control functions to guarantee accurate maintenance of key cards. Digital access control systems are valued highly in security technology for buildings" With this system set up, only access control hardware systems are deployed on premise while the software and access control data are shifted to a remote location and provided as a service to users on a recurring monthly subscription. The benefits of such an arrangement are numerous but include avoiding large capital investments and shifting the onus of cybersecurity and firmware updates to the vendor. “Digital access control systems are valued highly in security technology for buildings,” commented Evert te Pas, International Sales Manager at SimonsVoss. Snap-in installation “SmartIntego by SimonsVoss is a state-of-the-art digital access control solution that is easy and simple to deploy into existing physical and digital infrastructure such as doors and IT networks. The cable free and snap-in installation means it is compatible with most doors with no drilling of holes, so is scalable and flexible without limitation.” Morphean’s ACaaS system utilises door controllers from Axis Communications, namely the AXIS A1001 and the AXIS A1601, that serve as the interface between the cloud and the SimonsVoss’ SmartIntego system. Stephanie Hensler, Director Business Development at Axis Communications, said, “Axis is totally committed to this market and creating innovative solutions based on its open standards that allow partners to integrate different types of software and hardware for a fully scalable, flexible and future proof solution. We look forward to working even more closely with Morphean.” Morphean will be attending IFSEC 2019, 18-20 June, ExCel, London (Axis stand IF920).
Three reasons for adopting open architecture access control solutionsDownload
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
360 Vision Technology secures NCI’s Felixstowe lookout station with its video surveillance solutions
- 360 Vision Technology secures NCI’s Felixstowe lookout station with its video surveillance solutions
- Bank of Hawaii Uses March Networks Video Solution for Strategic Planning
- Hikvision’s IP video surveillance system used to upgrade security at London’s Kew Gardens
- Maxtag and Hikvision collaborate on HD IP video surveillance system to secure Fuller’s estate