Intruder Alarm Control Panels & Systems(726)
Smart security for a connected world from Vanderbilt Vanderbilt SPC is an intrusion detection platform that delivers a modern, powerful security system for your customers’ needs. It also enables your business to grow! SPC protects businesses, properties, and assets. It is an intrusion detection system that offers versatile and comprehensive alarm management functionality. Through the use of cloud services, End-user apps, and a dedicated software suite, SPC is at the forefront of modern intrusion detection. Vanderbilt’s SPC Wireless range has many benefits that will make installers’ day-to-day work life a whole lot easier. The new range includes: RF Module - Wireless. panel module with Antenna PIR - Wireless 12m PIR detector (PET immunity) Curtain PIR - Wireless curtain PIR detector Magnetic Contact - Wireless Magnetic Contact (Slim mount) Smoke Detector - Wireless smoke alarm RF Fob - Remote control (with 4 buttons) Panic Button - Wireless personal alarm (single button) Magnetic Contact - Wireless Magnetic Contact (with input) Benefits: Easy to mount, pair and configure Configurable over the air Long life battery Superior wireless range Designed to EN approval standards
Perimeter protection is one of the most effective ways to prevent an intruder. A more secure system is one that alerts the user of the presence of an intruder, before they can break into the property. It’s a simple idea, but fitting an external detector comes with challenges. Install the brand-new XDL12TT-AM and provide up to 12m premium and robust pet-friendly external detection. Consisting of two independent Passive Infrared (PIR) sensors and one microwave sensor, the Tri-Technology (TT) of the XDL12TT-AM utilises Tri-Signal Detection Logic to identify the presence of an intruder. This provides reliable and stable external detection as all three sensors must be activated sequentially in quick succession to create an alarm. This enhances the detector’s immunity to environmental disturbances and limits the risk of false alarms. With Dual-Vision Pet Immune Technology, each PIR sensor of the XDL12TT-AM has its own dedicated volumetric field of view. The top PIR detects outwards and up, while the bottom PIR detects outwards and down, without overlapping. This setup, alongside Tri-Signal Detection Logic, delivers highly secure sequential detection and increases its tolerance to pet immunity. So, should any large dogs or cats stray into the coverage plane, it would only be picked up by the bottom PIR and the microwave sensors and therefore an alarm condition would not be activated. However, the lens coverage of the PIRs are angled so that any human will be detected walking through both PIR coverage planes. Therefore, as all three sensors are activated, so would an alarm condition. This increases the detectors stability and limits the risk of false alarms. In terms of changing conditions and swaying vegetation, the XDL12TT-AM features Anti-Sway Analytics. This advanced digital filter distinguishing between the movements of trees and plants from that of an intruder, to maintain optimum performance. The detector also boasts IP55 weatherproof rating, thick polycarbonate plastics and fully sealed optics for optimum external performance. It has even been moulded with a stabilising material to prevent discolouration over time! The XDL12TT-WE also features Anti-Interference Technology to prevent intruders from bypassing detection. This consists of Anti-Masking, which is a Grade 3 Patented Technology that protects against any attempt to mask any of the three sensors with cardboard, duct tape, sprays, lacquers or aluminium foil. It also consists of Anti-Blocking, which is a Grade 4 Technology that prevents the system from being armed if there is anything blocking the vision of any of the sensors. Therefore, to arm the system, whatever is blocking the detector from detecting needs to be removed first. Providing either volumetric or curtain coverage to suit the area that needs protecting, each lens can also be masked to restrict the coverage area. This is particularly useful in areas where busy roads can cause false alarms. The detector also boasts three different frequency bands to avoid any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other. This also allows multiple to be fitted, including the use of a fixed bracket, which enables two to be fitted back to back, providing 24m range with 180° volumetric coverage. Whatever the requirement, the XDL12TT-AM provides the ideal external security solution.
Pyronix, the intrusion specialist of the world-leading Hikvision group, is delighted to announce the launch of the Enforcer 64 total wireless security solution. Taking residential security to a new level, the Enforcer 64 is as quick-to-fit, easy-to-use and reliable as ever before, but features a new modern design and V12.5 firmware for Hik-Connect compatibility and dual path communication capability. “We are absolutely committed to driving market applications towards total solutions, with the upmost attention for innovation and quality,” Laurence Kenny, Pyronix Marketing Manager, comments. He continues: “With the Enforcer 64 we have delivered this in abundance with a complete solution that fuses security, video and lifestyle enhancements, with greater communication contingency and reassurance.” Pyronix first introduced the Enforcer wireless control panel in 2012. Since then it has consistently won multiple coveted industry awards, due to the company’s commitment to continuous improvement and innovative technological advancements by its dedicated R&D team. These developments have culminated in the Enforcer 64, which comes with heightened capabilities to enable security and monitoring in one solution. The Enforcer 64 utilises Pyronix award-winning two-way wireless technology, which is now expandable to 64 wireless inputs thanks to V12.5 firmware; double the number of the previous Enforcer solution. This makes adding wireless outdoor XD detectors, indoor KX detectors, sounders, keypads or safety devices easy, to suit any installation preference, without having to compromise. “The Pyronix Enforcer is our premier wireless solution for professional security installers and integrators, utilising the award-winning features it is renowned for within the security industry as the foundation for further development,” Laurence comments. He continues: “We have further developed it to be expandable to 64 wireless inputs, delivering greater installation capability whilst fusing it with Hikvision’s extensive range of video equipment, iVMS via Hik-Connect for seamless functionality; all of which combine to provide a total solution.” The panel is certified to Grade 2 and perfectly suited for residential and small to medium sized commercial applications. It also delivers for multiple installation preferences, with complete compatibility with the whole range of communication modules. The solution also boasts hybrid capabilities, with the ability to add any of the complete range of wireless and wired peripherals, alongside the ability to add up to 30 automation outputs. The Enforcer 64 fuses intrusion and video to bring together intrusion and video on one platform for enhanced customer value and upsell opportunities.Add to Compare
The Avigilon Presence Detector (APD) is a discrete impulse radar device that combines self-learning analytics with impulse radar technology to accurately detect the presence of a person even if they have stopped moving or are hidden. The device scans, learns, and continuously adapts to its environment, helping to reduce false positive events. Designed for indoor locations such as ATM rooms and other closed indoor vestibules within banks, pharmacies, health care facilities and retail stores, the APD can accurately detect a person’s presence through blankets, cardboard, wood and drywall. When integrated with Avigilon Control Center video management software, the sensor is designed to alert operators of security events while still maintaining privacy.
As the intruder market increasingly converges, with products and solutions entering from various rival markets, the time to integrate and evolve is now. There has been a rapid increase in end-user targeting, with solutions that deliver more than just security, but lifestyle solutions, including remote video monitoring, automation capabilities and more. This added value makes a system a desired enhancement to day-to-day life, rather than simply a grudge purchase to deter or alert of intrusion. It’s time to advance into new market applications and grow your business, by offering it all, with the totally integrated Enforcer V12 and Hik-Connect smart device application. With professional security integrity in mind, Hik-Connect is a user-friendly smart device application that brings together Pyronix multi-award-winning intruder security systems and technologies, with Hikvision’s world-leading video surveillance technologies and innovation. This seamless synergy enables you to deliver fully integrated and secure systems that are easy-to-install, flexible, extensive and meet your end users’ needs and desires. Thanks to seamless Hik-Connect integration, you can offer the ability to arm and disarm, check the status of any detector or sensor on the system and control any automation outputs, as well as access complete video monitoring of the property from anywhere, thanks to compatibility with any Hikvision video device. Available on Android and iOS, your end users can check any events, monitor when their children have arrived home safe from school, see what pets are getting up to, monitor outbuildings or even answer their front door or respond to deliveries with mic-enabled cameras, as well as see all the push notifications they have received - all from the palm of their hand. Should an event occur on the system, they can also simply and easily switch between their control panel and cameras for quick video verification. This simple switching also allows for easy multi-site monitoring, access to camera recordings and previews of live-streams. Deliver a security and video monitoring centre in the palm of the end user’s hand for any residential or commercial purpose. Hik-Connect is compatible with app-enabled Pyronix Grade 2 and Grade 3 security systems; offering outstanding usability and flexibility that is simple to install and easy to use. It’s time to advance. It’s time to integrate.
One of the main advantages of Software-as-a-Service solutions is interconnectivity. The cloud allows us to work in a completely different way than was possible before. In the past, an installer would have to get in their van and make a site visit to investigate any complaints or issues from their customer. Now, this can all be done remotely through SaaS-solutions like Vanderbilt’s SPC Connect, changing the entire service interaction quite dramatically. Vanderbilt wants to continue that evolution. Customers now expect very high levels of service from installers. SaaS-solutions are the perfect enabler to achieve this. With SPC Connect, Vanderbilt is delivering an ecosystem that will allow installers to have a better communication environment with their customers. The latest service release of SPC Connect brings installers closer to their customers by creating a platform where they can communicate more freely with each other. This ability to have more open communication between installer and end user, in a secure mechanism such as SPC Connect, will have a significant impact on increasing the level of service for all parties. Customer notifications Installers can communicate through the SPC Connect network directly to their customers. This feature allows installers to create a message that will appear directly in the user’s app and in their email. The messaging editor provides editing capabilities and the inclusion of links. The installer can also download the list of all customers interested in their message. User restrictions This enhancement delivers the security company greater control of the level of service they wish to offer through SPC Connect. The function allows the security company to define what operations are permitted by a user such as: Blocking Email; Blocking Push Notification; Blocking Alarm Verification; Blocking Mobile App; and Blocking Verification Web. Alarm verification via mobile devices If an SPC panel is part of an SPC Connect installer account, then a new feature will activate on the user device that will allow the user to view verification data. If the SPC panel is not part of a company, or the company has chosen to block this feature, then the users of that panel will not see any change. When this enhancement is enabled, when an alarm occurs that has verification, the user will be able to view the data and talk and listen live to site.Add to Compare
ReX expands the boundaries of the protected area. The range extender controls the system devices connected to it enabling the user to place them at a considerable distance from the hub — in a high-rise office, in a detached garage or in a large production plant — while maintaining a stable connection. ReX acts as a reliable link between the hub and Ajax devices. Depending on the requirements, all detectors or only some of them can operate via the intelligent range extender. While regular range extenders represent the weakest link in the security systems increasing the risk of losing the alarm signal during transmission, ReX takes the reliability and resilience of Ajax to a new level. After the hub, ReX is the second decision-making center. It integrates detectors into an autonomous group within the system. If the connection with the hub is interrupted for some reason, ReX will assume control: it will receive an alarm signal from the detector and activate the siren to attract attention to the incident and scare off the burglar.
Exhibiting at Security Essen, Hall 5, Booth B48. Version 8.0 of long-range award-winning LiDAR – the REDSCAN RLS-3060 series and its configuration software REDSCAN Manager are both available. The new firmware enables additional detection modes including loitering detection, day/night pattern to the 30m radius RLS-3060L, while it allows the high end model to extend its detection area to 50m radius. The RLS-3060L will offer more flexibility in managing dry contacts with the option to switch from normally open (N.O.) to normally closed (N.C.). The RLS-3060L model ver. 8.0 features more detection zones and detection modes as well as greater flexibility with settings. The standard 2D LiDAR provides 30m radius detection range with 4 detection zones when used in analogue configuration and 8 zones in IP configuration. Loitering and selectable pattern modes are now available. Alarm duration and detection time settings are also more adjustable.
Version 8.0 of long-range award-winning LiDAR – the REDSCAN RLS-3060 series and its configuration software REDSCAN Manager are both now available. The laser sensor with the new firmware version, together with the new configuration software provide a number of new features for both the standard model, RLS-3060L, and the high-end model, RLS-3060SH. The RLS-3060SH will offer more flexibility in managing dry contacts with the option to switch from normally open (N.O.) to normally closed (N.C.). The RLS-3060-SH provides additional detection modes to the L model, such as indoor ceiling protection and vehicle detection mode, and has one major new feature – an extended detection area between 30 and 50m. When used in horizontal detection it creates a pre-warning zone from 30 to 50m radius that is able to detect larger objects such as vehicles. In vertical mode when mounted at 3m off the ground, it can detect a standing or squatting person over 100m making it ideal to pick up intruders, a long wall or fence.
Exhibiting at Security Essen, Hall 6, Booth 6D90. Wireless technology is coming of age, with two-way communication capabilities now cementing wireless’ reliability. Vanderbilt’s SPC Wireless range includes detectors, panic buttons, fobs, and a transceiver, and has a number of benefits intended to make installers’ day-to-day work life easier. The SPC wireless range can extend to 500 meters, proving a more cost effective alternative than having to wire an entire building with cable. This range of 500 meters also cuts down on install time, ultimately cutting down on an installer’s expenses. SPC Wireless devices use the industry-leading Energizer® lithium batteries, meaning an extended battery life of five years. This means installers don’t have to go to site as often to keep changing out batteries, freeing up time for more urgent tasks. Settings for the SPC Wireless range are all configurable over the air. Again, this reduces the need for time-consuming site visits. Most other products require the physical need to flick dipswitches to change commands but Vanderbilt’s SPC Wireless is aimed at convenience first. All-in-all, installs for SPC Wireless are designed to be hassle-free. You just put up the control panel, wire the mains to it, place the wireless detector in position, and you’re good to go. In contrast, a wired solution can take, at a minimum, a day’s work fitting cable. By reducing time on site, Vanderbilt’s SPC Wireless can enable installers to get more work done elsewhere, essentially meaning more profits from more jobs.
Strong wireless signalling, multi-award-winning Enforcer two-way wireless technology and a whole host of intelligent reliability, security and detection features have all gone into the XDL12TT-WE. The first low-mount wireless outdoor detector of the Pyronix range combines multi-award-winning Enforcer two-way wireless technology with dependable external detection protocols, including: Dual-Vision Pet Immune, Tri-Signal Detection Logic and Gaussian Frequency Modulation (GFM), to deliver a highly dependable wireless external detector. IP55 weatherproof rated and consisting of two independent passive infrared (PIR) sensors and one microwave (MW) sensor in one common housing, its Tri-Technology (TT) delivers advanced outdoor protection. This is because, to identify the presence of an intruder, the XDL12TT-WE utilises Tri-Signal Detection Logic alongside TT, whereby all three sensors must be activated sequentially in quick succession to create an alarm. This heightens the detector’s immunity to false alarms and ensures optimum detection performance in external conditions. Along with Tri-Signal Detection Logic and TT, Pyronix has also pre-empted potential false alarm issues from the presence of pets or swaying vegetation, by including Dual-Vision Pet Immune and Anti-Sway Analytics features. Dual-Vision Pet Immune of the XDL12TT-WE consists of its two PIRs having a dedicated volumetric field of view, with the top PIR detecting outwards and up, while the bottom PIR detects outwards and down, without either crossing the central horizontal plane between them. This setup of non-overlapping PIR sensors alongside Tri-Signal Detection Logic, delivers highly secure sequential detection and increases its tolerance to pet immunity. Anti-Sway Analytics digitally filters the environment to distinguish between the movement of trees and plants from the movements of an intruder, so that false alarm activations are kept to an absolute minimum. These external detection protocols then benefit from the advantages of Enforcer two-way wireless technology, with full supervision, anti-jamming and 128-bit wireless protocol encryption, to maximise the new XDL12TT-WE’s reliability; ensuring signals transmitted by the system are protected and any code-grabbing is prevented. Two-way wireless also brings with it a whole host of installation benefits, without the invasive nature of fitting wired peripherals. This increases the efficiency of the installation for our customers, while providing a steadfast detector for end-users. In terms of the wireless signal, the XDL12TT-WE’s high sensitivity receiver is capable of a wireless signal range of up to 1.6km in open space, which reduces the need for repeaters and therefore reduces the installation cost. In addition, the high-sensitivity antenna of the XDL12TT-WE ensures that the signals being transmitted and received are as strong as possible, by utilising GFM to spread the signal, while reducing unwanted noise and harmonics. This enables the outdoor detector to meet stringent European, ETSI and other worldwide standards. When it comes to wireless outdoor security, why not deliver the XDL12TT-WE?
Security Products from Vanderbilt (formerly known as Siemens Security Products) has released a new and updated version of its popular SPCanywhere app, which enables users of intruder detection installations based on the versatile SPC range to monitor and control their systems. The company has also now made the app available for use on Android devices as well as on devices that run Apple’s iOS operating system. The Android version of SPCanywhere can be found on Google Play, while the iOS version is in the Apple App Store. Both versions are free, and both are available to download immediately. With SPCanywhere running on an Android or Apple phone or tablet, users can monitor up to four SPC installations via an attractive and intuitive graphical interface. SPCanywhere provides an overview of the system area status as well as the status of all zones and door controls. A convenient map view mode is provided that use icons to clearly show the positions of detectors and verification cameras. By tapping on the appropriate icon, SPCanywhere users can control doors, areas and zones, and can even display realtime images from IP cameras connected to their SPC installation. A valuable new feature that has been added to the latest iOS version of SPCanywhere and is also available in the Android version is the ability to add multiple layers to the map, making it even faster and easier to confirm the status of the installation. In addition, the iOS version has now been optimised for use on the larger screen of the iPhone 5. A particularly valuable feature of SPCanywhere in business applications is that it allows the whole installation to be set and unset remotely. This means that, if the authorised person cannot be present in the workplace at the start of the working day, they can remotely unset the system. Similarly, at the end of the day, if they are not on the premises, they can remotely set the system. A comprehensive log screen is also provided by SPCanywhere, which allows users to access a detailed record of all significant events relating to their installation, including not only alarm activations but also power failures and other system incidents. SPCanywhere for Android is compatible with phones and tablets running Android 2.3 (Gingerbread) or higher, while the iOS version requires iOS 5 or higher and works with iPad 2 or later, iPhone 5, iPhone 4S, iPhone 4 and iPhone 3GS.Add to Compare
The Galaxy range of technology from Ademco Micotech will ensure that when correctly registered and used, premises will qualify for police response to confirmed alarm activation.The new KeyProx has been added to their comprehensive range of Galaxy control panels and peripherals, offering a combined LCD keypad and proximity reader which connects directly to the Galaxy communications bus. KeyProx functionality includes: Card "Self Learn" capability - the ability to read a wide range of proprietary encrypted and non-encrypted card types Removing the need for PIN entry - a simple set / unset capability in line with DD243:2002 - allowing completion of unsetting using portable equipment (card or fob), confirmation facility remains enabled Cost savings - the KeyProx offers a cost effective alternative to using an extra keypad with a MicroMAX reader Multi protocol formats - available in two variants, supporting standard ASK format and HID 26 and 34 bit protocolsAdd to Compare
Vanderbilt continues to lead the market with product innovations in Access Control, Intruder Detection and CCTV. Aliro 2 access control solution Aliro 2 is the latest generation of Vanderbilt’s industry leading Aliro access control solution. Building on the success of its predecessor and created alongside external developers, Aliro 2 is suitable for small to medium sized commercial applications, boasting easy to use Internet based software and intuitive mobile features. Utilising the advanced Mercury firmware platform, which provides unrivalled control, monitoring and data manipulation, it supports up to 512 doors, 10,000 users and 100,000 access cards. Visitors were able to see how it works with MiFare card readers featuring an integral LED based screen that facilitates cardholder interaction by displaying bespoke messages. Integration with Aperio is one of the highlights in the new feature set of Aliro 2 but there is much more to come as this new system paves the way for Vanderbilt’s future migration strategy. Vanderbilt’s SPC intrusion panel has obtained more approvals than any other, both European and further afield SPC intrusion detection Vanderbilt’s SPC intrusion panel has obtained more approvals than any other, both European and further afield. Vanderbilt continues to develop even more attractive features for this range including its SPC Connect. This cloud-based innovation provides customers with remote access to control panels, safe in the knowledge that the process is highly secure, thanks to the implementation of financial grade SSL security. Another exciting new aspect of SPC Connect is that installers can customise how they view data by setting up a feature which allows them to manage and control access rights to individual panels and groups of panels. Magic motion detector range The highly successful Magic motion detector range offers reliable detection of intruders and high false alarm immunity. Eventys CCTV range New to the CCTV portfolio is the Eventys range, a cost-effective range of cameras and recorders that are aimed at the simple set up and plug and play approach. With an intuitive interface offering outstanding functionality and flexibility, Eventys is perfect for small to medium sized installations that require up to 20 cameras.Add to Compare
Professional installers around the globe choose LightSYS™ for their mass-market installations. LightSYS™ Hybrid Security System offers ultimate flexibility, with advanced IP and GSM/GPRS communication as well as your choice of wired, wireless or RISCO Bus detectors.LightSYS main board technologies include plug-in GSM/GPRS and IP modules, remotely upgradeable firmware, and selectable zone resistance.RISCO Bus Technology saves you time and money and increases installation flexibility, while Auto-Install and Bus Test simplify installation and maintenance. Programming via the PC Configuration Software and the LightSYS keypad is enhanced due to an adaptive menu tree - only the relevant options are displayed according to the installed accessories and installer/user authority.Powered by RISCO Group's state-of-the-art technology with a wide range of accessories - LightSYS is your ultimate weapon for conquering small commercial and residential markets.Add to Compare
Security is a growing issue for businesses of all sizes, not just because of the potential costs of security breaches (damage to buildings, theft, etc.), but increasingly because of the negative impact security incidents can have on a business's future. Indeed, business recovery is now at the forefront of security concerns. From security to risk management... It is important to limit the time an intruder has inside a building, to prevent theft of assets or valuable commercial data, or damage/corruption of these same assets or data. Intrusion systems have a key role to play in this. Reliable detection provides immediate alerts in case of an attempted unauthorised entry. Alarm transmission over versatile communication channels (PSTN, ISDN, GSM and increasingly IP) ensures alerts are received at the monitoring centre or control room every time. Alarm verification tools enable an appropriate and immediate response to events. Vanderbilt (formerly known as Siemens Security Products) understands that the level of sophistication and functionality required in intrusion systems is driven by the size of the business they cover. The range of Intrunet™ intrusion systems caters for applications of all sizes, from simple intrusion prevention for smaller businesses to more sophisticated functionality in large premises or multi-site operations. The Intrunet™ range of professional intrusion systems offers everything modern security demands and more: compliance with European standards, scalability, modularity, superior detection capability, highest false alarm immunity, functional customisation and integration, as well as support for alarm management and response services, to name but a few. The comprehensive portfolio includes motion detectors for Grade 2 to Grade 4 applications, glass break and seismic detectors with sophisticated signal processing, as well as control panels that provide reliable alarm transmission and flexible on-site or remote alarm verification for all applications. From risk management to operational performance optimisation Many factors affect operational performance and security is increasingly one of them. Material damage, injuries to staff/customers (and the resulting legal implications), disruption to services leading to lost sales opportunities, image loss for the larger organisations (impacting on competitiveness) - all of these and more can be lessened through effective security measures. Studies also show that many of the businesses that have suffered lengthy interruptions following security issues never fully recover. This is why damage limitation is at the heart of any security system. With Intrusion systems, this means adding layers of intrusion detection at every step: from perimeters to buildings, and all the way through to valuable assets. The Vanderbilt (formerly known as Siemens Security Products) Intrunet™ range of internal and external motion detectors, glass break and seismic detectors, builds on in-depth knowledge of sophisticated detection technologies: all offer intelligent signal processing, for reliable intrusion detection and effective discrimination against false alarms. For all indoor and outdoor applications Compliance with international standards Proven performance and reliability Installation-friendly design Choosing the right intrusion system - help is at hand Whilst large organisations tend to be better protected, small to mid-size businesses still often find it hard to invest in security. Regardless of the circumstances, with so many systems to choose from, knowing which will give the right security answer can be a daunting task for end-users, installers and consultants alike. When it comes to intrusion systems, many factors need to be considered, including: demand for system expansion migration to new technologies customisation at an affordable price So intrusion systems must be flexible enough to grow and evolve, without jeopardising the customer's initial investment. To help security professionals choose the appropriate systems for given applications, Vanderbilt (formerly known as Siemens Security Products) has launched the first of its "application" security brochures, which provides a targeted positioning of its intrusion systems within small, medium and large retail applications. Given the trend towards an holistic approach to security from end-users, these brochures also put Intrusion systems in an interoperability context, with practical examples of the security challenges faced, in this first "application" brochure, by retailers of all sizes, and showing how varied security issues can be addressed with the right level of interoperability between access control, intrusion detection, and video surveillance systems.Add to Compare
Under the ‘interoperability' theme at IFSEC 2008 (stand 8048, Hall 6), Vanderbilt (formerly known as Siemens Security Products) will feature their Intruder Detection capability. Amongst the highlights will be the new range of Intrunet SI series system components which not only simplify installation but also improve security of operation. The stylish keypad with integrated tag reader facilitates multi-partition operation. Slimline key switch and annunciation modules with unique tamper detection - used standalone or linked to the keypad - offer additional security levels and parallel partition indication and operation. The new keypad and its annunciation and key-switch modules have been nominated for the IFSEC 2008 awards in the "Intruder product of the year" category. Intruent SPC Series Also on show will be the new Intrunet SPC series systems, which combine unmatched flexibility and scalability up to 512 zones, with a cost effective design and installation concept. A common range of system components - keypads, smart expanders and modules - can be mixed and matched to expand the system to meet changing security requirements. Ultimate control is achieved on site or remotely via the on-board web server - a feature which is unique on the market. To register now to see Vanderbilt (formerly known as Siemens Security Products) at IFSEC, click hereAdd to Compare
Featuring a stylish design, graphical touchscreen and proximity tags, KP-160 PG2 is designed to maximise user experience while keeping price at bay. The large, icon-based display is clear and appealing, and the keypad replaces the need for costly keyfobs. The KP-160 PG2 is also suitable for use by children and elderly people. Using the decorative proximity tags, which easily fit on a keychain, any user - young or old - can easily arm/disarm the system, initiate fire and panic alarms and review the system status. The intuitive touchscreen display dramatically reduces the learning curve for users. There are no complicated commands to remember or blinking lights to interpret. KP-160 PG2 virtually eliminates the need for long training sessions by the installer. KP-160 PG2 is the ideal solution for controlling basic alarm functions from different locations in the home or small business premises and is compatible with the PowerMaster family of intrusion alarm systems. KP-160 PG2 Features and Benefits: Large touchscreen with graphical Icons Easy and intuitive operation Suitable for use also in working environments for employees to use their standard RFID card with the keypad Sleek design Superb value for price Performs all common actions such as arming/disarming, initiating emergency, fire and panic alarms, controlling PGM outputs and reviewing system status Wall-mounted or desktop use Suitable for any home or small office Up to 32 keypads in one PowerMaster system (up to 8 for PowerMaster-10 and up to 32 for PowerMaster-30) Visonic’s PowerG RF technology Extended range – Eliminates the need for repeaters Robust and highly suitable for harsh environments Provides user with feedback on commands Prolonged battery life Optional mains power allows always-on status display Audible exit/entry warning (even when running on batteries) Compatible with PowerMaster intrusion alarm systems Alarm system control panel can be installed in a hidden location hard to find by intrudersAdd to Compare
Nominated for the 2008 IFSEC Awards, the stylish SAK94 keypad facilitates system commissioning, and enhances operational security. With easy log-on via the integrated proximity card reader (125kHz), it has a state of the art user interface supported by soft keys and a large graphical LCD display, and is optimised to operate multi-partition applications (up to 16 with 4 partitions permanently displayed). The keypad also features a built-in speaker/microphone for alarm verification (replacing the traditional beeper) which allows sound and frequency differentiation between alarms and keys. This helps increase the user's alarm awareness and enables sound level adjustments to be made for users with hearing difficulties. The add-on modules extend the unique design and operational security concept: the SAK9S1 (key switch module) enables the differentiation of accessible operating modes based on the activation time of the key switch. The SAK9L1 annunciation module gives an overview of multiple partitions through keypad status LEDs - and features keys for the direct arming of partitions. Ease of installation and set-up has also been addressed. A wire-free front cover offers easy access to the housing, with built-in spirit levels to ensure precise wall mounting. The set-up process features language independent menus for manual localization, a local installer menu enabling keypad specific parameters to be defined and local keypad settings enabling post-installation user-specific adjustments to be easily made. The keypad and its add-on modules are ideal for high residential and industrial security applications, as well as large or complex organisation such as banks, museums or shopping centres.Add to Compare
Honeywell's new Galaxy TouchCenter Prox is an innovative and enhanced version of the popular Galaxy® TouchCenter keypad. The new integrated proximity reader is designed to reduce the number of false alarms and police call-outs due to operator errors such as incorrect PIN entry. The customer experience is simplified and the integration of the innovative proximity function means the keypad is now fully compliant with UK standards.The TouchCenter touch screen keypad with graphical display simplifies programming and provides a more intuitive experience for the end user. Unlike regular keypads, logs are much easier to read and analyse and the management of users and multi-area systems is more straightforward, enabling end-users to easily manage the system. If users prefer a more traditional MK7 keypad instead of the new interface, a simple button allows them to switch to a standard 32 character display.The Galaxy TouchCenter Prox also now incorporates a VGA high definition screen, allowing photo quality images to be displayed. This innovation, enabled by a simple SD card slot, provides a wealth of customisation options such as a family photo for a home owner or a company logo for a business. Installers can also use this tool to display their contact information and company logo on the keypad screen to drive sales and provide a quick point of reference for helpline numbers.The new keypad also gives users access to an on-screen easy-to-navigate help menu that can address operational problems that the user may experience, and reduce or eliminate unnecessary calls to the installer. The help menu allows the user to access information about the system on a 24/7 basis and also removes the need to store a printed instruction manual that is easily damaged or misplaced. "Since launching the Galaxy TouchCenter we have seen a strong demand from our customer base for touch screen technology," said Yves Pichon, Marketing Leader, Europe, Middle East and Africa, Honeywell Security Group. "As smartphones and other touchscreen devices continue to gain broad consumer acceptance, we expect this to be a key area of innovation and growth for the industry as a whole. Honeywell is excited to be at the forefront of this new trend."For further information on Honeywell's security solutions visit www.honeywell.com/security/ukAdd to Compare
Climax introduce a new generation of MZ control panel series as an integrated and comprehensive system that manages safety, security and home environments together under one unit. Unlike traditional alarm system, MZ series not only serves as an intrusion alarm system, but also assists you to manage your home in a more convenient way. With advanced alarm communication features and outstanding compatibilities - home automation, visual verification, smart energy saving function, and lighting control, new MZ series brings a complete and cost-effective smart home solution for you to experience a comfortable and convenient life. MZ series includes MZ-1, MZ-3 and MZ-8 with various reporting paths for you to select from: MZ-1 is a wireless IP control panel. MZ-3 is a wireless GSM/GPRS control panel. MZ-8 is a wireless control panel in dual path of IP/GSM. Outstanding features of MZ Series - Flexible home security solution: MZ series works with a variety of sensors up to 40 to protect your family and properties. Sensor connected MZ series can be flexibly set to different attributes and further inform you on a precise type of alarm. - Visual verification: PIR Video Camera/PIR Camera can provide a visual verification solution for central monitoring station or users to verify whether the alarm is real alarm or false alarm. - Smart home control: Choice of Home Portal™ Server or Vesta EZ Home App: Home Portal™ Server is a platform to deliver smart home services for users to remotely control their home via web-based browser or smart phone applications. Rather than connecting Home Portal™ Server to enjoy remote smart home services, users have another choice of using Vesta EZ Home App to control their home via SMS protocol. - Compatible with ZigBee Information Keypad KP-29ZB/ KPT-29ZB: MZ series can work with ZigBee information keypad KP-29ZB/ KPT-29ZB to simplify the operation of security system by one touch on the touchpad or swiping a proximity tag or NFC tag near the keypad. - Zigbee home automation: Zigbee based Home Automation feature is designed for you to control your home condition at your convenience. Home appliances can be controlled depending on conditions you configure in MZ control panels. -Create a more pleasant atmosphere:ML series can work with Climax dimmer switches to enhance the beauty of home environment. In conjunction with dimmer devices, ML series enable -users to control their home lighting at certain levels or conditions to make home a more pleasant place to live.Add to Compare
Homelink 75 is a professional home security solution, which has an attractive modern design, and is quick and easy to install. Features include:Now fully compliant with EN50131 and PD6662:2004, DD243:2004 Grade 2 32 radio zones and 2 hardwired zone inputs128 x 64 pixel LCD pictographic displayAttractive, modern design to fit in any location and lifestyleScreen logos self programmable via flashloaderRemote access and control from any telephone, fixed line or mobileGSM to communicate alarms and system status without the need for a fixed telephone lineTCP/IP broadband sends data straight from your Homelink 75 system to a monitoring centre via broadband, LAN or WAN Scantronic AE2 dual diversity 868MHz narrowband radio receiverStandard integral digital communicator offering SCANCOM Fast Format, CID, SIA 1, 2 and 3 extended formatsIntegral social alarm function with Tunstall and SCANCOM Fast Format communications and semi-duplex loud-speaking facilityIntegral speech dialler with one 12s home message and up to 4 consecutive messages, each 8s long with listening-in and talk-back facilityFull up/download and remote servicing facilityNow lets you remotely check the status of the system at any time and even allows the user to switch all or part of the system, on or offOffers all the functionality to protect your property as well as minimal disruption during installationUsing mobile technology, Homelink 75 combines communications and security to bring you a system that not only protects what you care about, but tells you what you need to know - when you need to know itAdd to Compare
The IMPASSA strategy: Detect. Defend. Defeat. IMPASSA is the newest, next generation wireless security system from DSC. IMPASSA comes with the defense and offense needed to protect the ‘king’ – the home and homeowner - including: An integrated HSPA (3G) cellular communicator for high speed, reliable and secure alarm communications. The flexibility of a distributed approach that allows wireless devices to be located wherever needed for optimal protection. As easy as setting up a chessboard, installers can now deliver a full featured home security solution in minutes by easily enrolling a range of compatible wireless devices into the IMPASSA security system. Defensive strategy - Integrated 3G cellular communicator As any good chess player knows, looking many moves ahead is critical for a checkmate. As more homeowners transition away from traditional phone lines towards VoIP (Voice over IP) or mobile wireless phones for communication, IMPASSA delivers an alternate communication path using the cellular network. In addition, IMPASSA includes a more traditional phone line communicator using the Plain Old Telephone Systems (POTS). The IMPASSA integrated communicator uses proven 3G technology. This not only allows for faster data-transmission speeds, but provides a longer lifecycle as cellular providers begin to phase out their GSM (2G) networks. Just like a mobile phone, IMPASSA displays the cellular signal strength to help determine the optimal mounting position within the home. For the homeowner’s convenience, the real time clock updates the time and date via the cellular communicator.Add to Compare
Browse Intruder Alarm Control Panels & Systems
Intruder alarm system control panel products updated recently
Johnson Controls recently unveiled the findings of its 2018 Energy Efficiency Indicator (EEI) survey that examined the current and planned investments and key drivers to improve energy efficiency and building systems integration in facilities. Systems integration was identified as one of the top technologies expected to have the biggest impact on the implementation in smart buildings over the next five years, with respondents planning to invest in security, fire and life-safety integrations more so than any other systems integration in the next year. As advanced, connected technologies drive the evolution of smart buildings, security and safety technologies are at the center of more intelligent strategies as they attribute to overall building operations and efficiencies. SourceSecurity.com spoke with Johnson Controls, Building Solutions, North America, VP of Marketing, Hank Monaco, and Senior National Director of Municipal Infrastructure and Smart Cities, Lisa Brown, about the results of the study, smart technology investments and the benefits of a holistic building strategy that integrates security and fire and life-safety systems with core building systems. Q: What is the most striking result from the survey, and what does it mean in the context of a building’s safety and security systems? The results show an increased understanding about the value of integrating safety and security systems with other building systems Hank Monaco: Investment in building system integration increased 23 percent in 2019 compared to 2018, the largest increase of any measure in the survey. When respondents were asked more specifically what systems they we planning to invest in over the next year, fire and life safety integration (61%) and security system integration (58%) were the top two priorities for organisations. The results show an increased understanding about the value of integrating safety and security systems with other building systems to improve overall operations and bolster capabilities beyond the intended function of an individual system. Q: The survey covers integration of fire, life safety and security systems as part of "smart building" systems. How do smarter buildings increase the effectiveness of security and life safety systems? Hank Monaco: A true “smart building” integrates all building systems – security, fire and life-safety, HVAC, lighting etc. – to create a connected, digital infrastructure that enables individual technologies to be more intelligent and perform more advanced functions beyond what they can do on their own. For example, when sensors and video surveillance are integrated with lighting systems, if abnormal activity is detected on the building premise, key stakeholders can be automatically alerted to increase emergency response time. With integrated video surveillance, they also gain the ability to access surveillance footage remotely to assess the situation. When sensors and video surveillance are integrated with lighting systems abnormal activity on the premise can automatically be detected Q: How can integrated security and life safety systems contribute to greater energy efficiency in a smart building environment? Hank Monaco: Security, fire and life-safety systems can help to inform other building systems about how a facility is used, high-trafficked areas and the flow of occupants within a building. Integrated building solutions produce a myriad of data that can be leveraged to increase operational efficiencies. From an energy efficiency standpoint, actionable insights are particularly useful for areas that are not frequently occupied or off-peak hours as you wouldn’t want to heat or cool an entire building for just one person coming in on the weekend. When video surveillance is integrated with HVAC and lighting systems, it can monitor occupancy in a room or hallway. The video analytics can then control the dimming of lights and the temperature depending on occupant levels in a specific vicinity. Similarly, when access control systems are integrated with these same systems, once a card is presented to the reader, it can signal the lights or HVAC system to turn on. In this example, systems integration can ultimately help enable energy savings in the long run. Security and life safety systems contribute to help enable greater energy efficiency and energy savings in the long run Q: What other benefits of integration are there (beyond the core security and life safety functions)? Hank Monaco: Beyond increased security, fire and life-safety functions, the benefits of systems integration include: Increased data and analytics to garner a holistic, streamlined understanding of how systems function and how to improve productivity Ability to track usage to increase efficiency and reduce operational costs Enhanced occupant experience and comfort Increased productivity and workflow to support business objectives Smart-ready, connected environment that can support future technology advancements Q: What lesson or action point should a building owner/operator take from the survey? How can the owner of an existing building leverage the benefits of the smart building environment incrementally and absent a complete overhaul? Lisa Brown: Johnson Controls Energy Efficiency Indicator found that 77% of organisations plan to make investments in energy efficiency and smarter building technology this year. This percentage demonstrates an increased understanding of the benefits of smart buildings and highlights the proactive efforts building owners are taking to adopt advanced technologies. There is an increased understanding that buildings operate more effectively when different building systems are connected As smart buildings continue to evolve, more facilities are beginning to explore opportunities to advance their own spaces. A complete overhaul of legacy systems is not necessary as small investments today can help position a facility to more easily adopt technologies at scale in the future. As a first step, it’s important for building owners to conduct an assessment and establish a strategy that defines a comprehensive set of requirements and prioritises use-cases and implementations. From there, incremental investments and updates can be made over a realistic timeline. Q: What is the ROI of smart buildings? Lisa Brown: As demonstrated by our survey, there is an increased understanding that buildings operate more effectively when different building systems are connected. The advanced analytics and more streamlined data that is gathered through systems integration can provide the building-performance metrics to help better understand the return on investment (ROI) of the building systems. This data is used to better understand the environment and make assessments and improvements overtime to increase efficiencies. Moreover, analytics and data provide valuable insights into where action is needed and what type of return can be expected from key investments.
Across the country, law enforcement officers are finding it increasingly difficult to respond to the near overwhelming number of calls coming from security alarms. Police departments commonly define a false alarm as a call, which upon investigation, shows no evidence of criminal activity, such as broken windows, forced doors, items missing, or people injured. While false alarms bog down police, they can also negatively impact customers and integrators. End users can expect hefty fines for false alarm responses, and when these customers receive large bills from the city, many turn to installers, dealers, and even manufacturers expecting them to accept the responsibility and pay the bill. What first brought the issue of alarm verification to your attention? It is crucial to both see a situation and concurrently listen to any corresponding sounds to gain full insight I’ve been aware of the problem of false alarms for about 5 years. I believed audio capture, through microphone deployment, could be an active part of the solution when used as a second source for indicating ‘out of the norm’ activity and as an equal component with the video surveillance technology. In 2015, I found similarly minded security professionals when introduced to the Partnership for Priority Verified Alarm Response. After reading PPVAR’s paper on ‘Audio Verified Alarms Best Practices; [April 2015],’ I knew that the Partnership was on to something important. In our lives, two of the five senses we count on day-in and day-out are sight and sound. It is crucial to both see a situation and concurrently listen to any corresponding sounds to gain full insight. What is the false alarm rate? In 2016, the International Association of Chiefs of Police reported that over 98 percent of all alarm calls in the United States were false. This number is obviously staggering, and something we need to work towards correcting. Why did this issue resonate so strongly with you? When I first investigated this issue, I was sure that the security industry would have already recognised this and was acting to ensure improved alarm verification, preferably through a combination of audio and video technologies. However, I quickly saw that this was not the case, or even close to the norm. I have questioned the rationale behind the lack of adoption and found the deployment of audio is often hindered by the concern of privacy. I’ve spearheaded many initiatives to explain the monitoring policies surrounding audio As CEO of Louroe Electronics, I’ve spearheaded many initiatives to explain the monitoring policies surrounding audio. I’ve had to reassure many security personnel and customers how the law supports the use of audio in public places as long as there is no expectation of privacy. By dispelling fears with facts around deploying and implementing audio sensors, customers can confidently include audio in their surveillance systems and gain a more effective security solution. Who is affected by this? Truth be told, everyone from the end user to the manufacturer is affected by this issue. Not to mention the strain this puts on law enforcement who are tired of ‘wasting time’ and effort out in the field on these nuisance alerts. When an end user receives a bill for their false alarm, many of them will immediately blame the integrator and or the monitoring center for a faulty set up and management and expect the integrator to remedy the situation, including carry the burden of paying the fines. The integrator, on the other hand, will turn to the manufacturer, assuming faulty equipment and installation instructions; therefore, looking for reimbursement for the cost. What is the average false alarm fee? It depends on many factors, and especially your first responder assigned location for responseIt depends on many factors, and especially your first responder assigned location for response. According to the Urban Institute, fees generally range from $25-$100 for the first offense, rising as high as a few thousand dollars per false alarm if a location has a large number in a single year. What’s worse, in extreme cases, alarm systems may even be blacklisted by the police dispatch center if they have raised too many false alarms in the past. Why do you believe audio is the ideal technology for secondary source verification? Video surveillance has been the main option for security monitoring and alarm validation for decades, however industry professionals are realising that video alone is not enough. Video only tells half of the story, by adding audio capture, the responsible party gains a turnkey solution with the ability to gather additional evidence to verify alerts and expand overall awareness. In reality, audio’s range is greater than the field of view for a camera. Sound pickup is 360 degrees, capturing voices, gunshots, breaking glass, sirens, or other important details that a fixed camera many not see. How would a secondary source verification system work with audio? Using a video monitoring solution equipped with audio, the microphone will pick up the sounds at the time a visual alert or alarm is triggered. If embedded with classification analytics, the microphone will send alerts for specific detected sounds. The captured audio, and any notifications are immediately sent to the monitoring station, where trained personnel can listen to the sound clip, along with live audio and video from their station. When law enforcement receives a validated alarm, they can better prioritise the response From here, an informed decision can then be made about the validity of the alarm, along with what the current threat is at the location. If the alarm is in fact valid, the information is then passed along to the law enforcement within minutes. When law enforcement receives a validated alarm, they can better prioritise the response. It also provides more information in a forensic evaluation. Are there any additional resources you would suggest looking into? Yes, we would suggest looking into the following to see a few different perspectives on the matter: NSA Support For 2018 Model Ordinance For Alarm Management and False Alarm Reduction Partnership for Priority Verified Alarm Response Support for the Term “Verified Alarm” and Prioritising Verified Alarm Responses Urban Institute Opportunities for Police Cost Savings without Sacrificing Service Quality: Reducing False Alarms
If you’re responsible for a medium or large-sized office, it’s more important than ever that you have access to a means of ensuring people’s safety, managing risks and fraud, and protecting property. Any security system that you employ must therefore meet the most demanding commercial requirements of today’s offices, and tomorrow’s. This means thinking beyond a basic intrusion system and specifying a comprehensive solution that integrates smart features like access control, video management and intelligent video analytics. Because only then will you have security you can trust, and detection you can depend on. Reliable entry management Access control systems have been developed that guarantee reliable entry management for indoors and outdoors Access control is becoming increasingly important for ensuring the security of office buildings, but as the modern workplace evolves you’re unlikely to find a one-size-fits-all solution. Today, it’s commonplace to control entry to individual rooms or restricted areas and cater to more flexible working hours that extend beyond 9 to 5, so a modern and reliable access control system that exceeds the limitations of standard mechanical locks is indispensable. Access control systems have been developed that guarantee reliable entry management for indoors and outdoors. They use state-of-the-art readers and controllers to restrict access to certain areas, ensuring only authorised individuals can get in. With video cameras located within close proximity you can then monitor and record any unauthorised access attempts. The system can also undertake a people-count to ensure only one person has entered using a single pass. Scalable hardware components As previously mentioned, there is no one-size-fits-all system, but thanks to the scalability of the hardware components, systems can adapt to changing security requirements. For example, you can install Bosch’s Access Professional Edition (APE) software for small to medium-sized offices, then switch to the more comprehensive Access Engine (ACE) of the Building Integration System (BIS) when your security requirements grow. And, because the hardware stays the same, any adaptations are simple. APE’s ‘permanent open’ functionality allows employees and guests to enter designated areas easily and conveniently The APE software administers up to 512 readers, 10,000 cardholders and 128 cameras, making it suitable for small to medium-sized buildings. With functions like badge enrollment, entrance control monitoring and alarm management with video verification it provides a high level of security and ensures only authorised employees and visitors are able to enter certain rooms and areas. Of course, there will always be situations when, for convenience, you need certain doors to be permanently open, such as events and open days. APE’s ‘permanent open’ functionality allows employees and guests to enter designated areas easily and conveniently. Growing security needs You switch to the Bosch Building Integration System (BIS), without having to switch hardware (it stays the same, remember?). This is a software solution that manages subsystems like access control, video surveillance, fire alarm, public address or intrusion systems, all on a single platform. It is designed for offices with multiple sites and for large companies with a global presence. Bosch Building Integration System (BIS) manages subsystems like access control, video surveillance, fire alarm, public address or intrusion systems, all on a single platform The BIS Access Engine (ACE) administers up to 10,000 readers and 80 concurrent workplace clients per server, and 200,000 cardholders per AMC. An additional benefit to security officers is the ability to oversee cardholders and authorisations through the central cardholder management functionality and monitor all access events and alarms from every connected site. For consistency, multi-site cardholder information and access authorisations can be created on a central server and replicated across all connected site servers, which means the cardholder information is always up to date and available in every location. Intrusion alarm systems Bosch B Series and G Series intrusion control panels can also send personal notifications via text or email Securing all perimeter doors is vital when protecting employees, visitors and intellectual property. Doors are opened and closed countless times during business hours, and when intentionally left open, your office is vulnerable to theft, and the safety of your employees is compromised. For this reason, intrusion control panels have been developed with advanced features to ensure all perimeter doors are properly closed, even when the system is not armed. If a door remains open for a period of time (you can specify anything from one second to 60 minutes), the system can be programmed to automatically take action. For example, it can activate an audible alert at the keypad to give employees time to close the door. Then, if it is still not closed, it will send a report to a monitoring center or a text directly to the office manager, and when integrated with video it can even send an image of the incident to a mobile device. Customised intrusion systems What about people who need to access your building outside of working hours, like cleaning crews? Your intruder system allows you to customise the way it operates with a press of a button or swipe of a card. This level of control enables you to disarm specific areas, bypass points and unlock doors for cleaning crews or after-hours staff, whilst keeping server rooms, stock rooms and executive offices safe and secure. Bosch B Series and G Series intrusion control panels can also send personal notifications via text or email. You can program the panel to send you opening, closing, and other event alerts, which means you don’t have to be on-site to keep track of movements in and around your facility. Video management system A video management system will add a next level of security to your access control system Every office building has different video security requirements depending on the location, size and nature of the business. Some offices may only need basic functions such as recording and playback, whereas others may need full alarm functionalities and access to different sites. A video management system will add a next level of security to your access control system. For example, the video system can provide seamless management of digital video, audio and data across IP networks for small to large office buildings. It is fully integrated and can be scaled according to your specific requirements. The entry-level BVMS Viewer is suitable for small offices that need to access live and archived video from their recording solutions. With forensic search it enables you to access a huge recording database and scan quickly for a specific security event. For larger offices, embellished security functions for the BVMS Professional version can manage up to 2,000 cameras and offers full alarm and event management Full alarm and event management For larger offices, embellished security functions for the BVMS Professional version can manage up to 2,000 cameras and offers full alarm and event management. It’s also resilient enough to remain operative should both Management and Recording Servers fail. Large multi-national companies often need access to video surveillance systems at numerous sites, which is why BVMS Professional allows you to access live and archived video from over 10,000 sites across multiple time zones from a single BVMS server. When integrated with the BVMS Enterprise version multiple BVMS Professional systems can be connected so every office in the network can be viewed from one security center, which provides the opportunity to monitor up to 200,000 cameras, regardless of their location. Essential Video Analytics Video analytics acts as the brain of your security system, using metadata to add sense and structure to any video footage you capture If your strategy is to significantly improve levels of security, video analytics is an essential part of the plan. It acts as the brain of your security system, using metadata to add sense and structure to any video footage you capture. In effect, each video camera in your network becomes smart to the degree that it can understand and interpret what it is seeing. You simply set certain alarm rules, such as when someone approaches a perimeter fence, and video analytics alerts security personnel the moment a rule is breached. Smart analytics have been developed in two formats. Essential Video Analytics is ideal for small and medium-sized commercial buildings and can be used for advanced intrusion detection, such as loitering alarms, and identifying a person or object entering a pre-defined field. It also enables you to instantly retrieve the right footage from hours of stored video, so you can deal with potential threats the moment they happen. Essential Video Analytics also goes beyond security to help you enforce health and safety regulations such as enforcing no parking zones, detecting blocked emergency exits or ensuring no one enters or leaves a building via an emergency exit; all measures that can increase the safety of employees and visitors inside the building. Intelligent Video Analytics Intelligent Video Analytics have the unique capability of analysing video content over large distances Intelligent Video Analytics have the unique capability of analysing video content over large distances, which makes it ideally suited to more expansive office grounds or securing a perimeter fence. It can also differentiate between genuine security events and known false triggers such as snow, rain, hail and moving tree branches that can make video data far more difficult to interpret. The final piece in your security jigsaw is an intelligent camera. The latest range of Bosch ’i’ cameras have the image quality, data security measures, and bitrate reduction of <80%. And, video analytics is standard. Be prepared for what can’t be predicted. Although no-one can fully predict what kind of security-related event is around the corner, experience and expertise will help make sure you’re always fully prepared.
Three reasons for adopting open architecture access control solutionsDownload
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
- Gallagher secures Wellington City Council with its Command Centre central management platform
- Kunsthalle Mannheim art museum gets integrated networked solution from Bosch
- Siaxma installs video surveillance equipment at Regiobank Solothurn bank in Bilberist and Zulchwil
- AxxonSoft praised for security and infrastructure solutions provided during the FIFA World Cup in Russia