Video Servers (IP Transmission) / Video Encoders(758)
The FUJINON SX800 camera system marks FUJIFILM's successful entry into the surveillance systems market. FUJIFILM presents the new long-range camera module FUJINON SX800 to the surveillance systems market. With a full HD camera and an optically stabilized, 40x zoom lens from FUJINON, two high-performance components are integrated into one system. This innovation is the result of years of experience in digital cameras and a dedication to the highest optical quality. Thanks to its powerful 1/1.8" image sensor, the long focal length range of 20 mm to 800 mm and state-of-the-art image processing technology, the FUJINON SX800 is ideally suited for aerial surveillance. In modern society, the security needs of citizens are constantly increasing. Surveillance cameras with long focal lengths are not only used to address sensitive issues such as border security but are increasingly being incorporated into public infrastructure such as airports, seaports and motorways. Long range surveillance systems must cope with special challenges. For optics with long focal lengths, the smallest vibrations are sufficient to compromise the image information. Heat haze or fog in the air also impair image quality. And, a focus drive that is too slow leads to safety-relevant information loss. However, with the development of the new FUJINON SX800, FUJIFILM has found a way to minimize the impact of these challenges. Instead of developing a surveillance camera and a separate matching lens, the concept of a fully integrated system consisting of camera and lens has been realized. In addition to the high-quality zoom optics, the FUJINON SX800 has a powerful combined optical and electronic image stabilization mechanism that provides angle correction of up to ±0.22 degrees. The integrated high-speed autofocus provides a sharply focused image in less than a second, while a fog filter and heat haze reduction technology helps prevent weather interference. The system provides consistently sharp images – even of objects several kilometers away. In addition, the integrated design of the new FUJINON SX800 reduces the high adjustment effort normally required for camera installation. As of Q3 2019, the FUJINON SX800 will be available as both a mobile stand-alone device and as a system that can be integrated into a pan-tilt head.
System OverviewExperience 4MP full HD colour video and the simplicity of reusing existing coaxial infrastructure with HDCVI. The full-colour starlight HDCVI camera presents a high quality colour image with rich details even in total darkness conditions. It offers various fixed lens models with a multi-language OSD and HD/SD switchable output. It adopts two powerful warm white LED illuminators, covering an effective range up to 40 m (131.23 ft). The LEDs switch on automatically in darkness to capture detail-packed fullcolour images 24/7, ensuring anthentic identificaiton of objects. It is an ideal choice for applications such as schools, retail centers and parking lots. Functions Full-colour StarlightThe camera adopts F1.2 large aperture lens and 1/2.7" high performance sensor. With higher amount of absorbed light and advanced image processing algorithm, the camera presents an impressive lowlight performance with an exceptional balance between noise reduction and the blur of moving object. Warm Supplemental lightsWith two warm supplemental LED lights, the camera is able to provide a colourful and vivid image even in total dark. By default, the camera is set to smart light mode, in which the camera can automatically adjust the exposure time and light sensitivity simultaneously to avoid overexposureing of the objects in the image center. Also, the sensitivity and intensity of the LED lights can be remotely controlled by OSD menu. Broadcast-quality Audio*Audio information is used as supplementary evidence in video surveillance applications. The HDCVI camera supports audio signal transmission over coaxial cable. In addition, it adopts unique audio processing and transmission technology that best restores source audio and eliminates noise, guaranteeing the quality and effectiveness of collected audio information. 4 Signals over 1 Coaxial CableHDCVI technology supports 4 signals to be transmitted over 1 coaxial cable simultaneously, i.e. video, audio*, data and power. Dual-way data transmission allows the HDCVI camera to interact with the HCVR, such as sending control signal or triggering alarm.*Audio input is available for some models of HDCVI cameras. Long Distance TransmissionHDCVI technology guarantees long-distance and real-time transmission without any loss. It supports up to 700 m for 4MP HD video via coaxial cable, and up to 300 m via UTP cable.**Actual results verified by real-scene testing in Dahua's test laboratory. SimplicityHDCVI technology inherits the born feature of simplicity from traditional analogue surveillance system, making itself a best choice for investment protection. HDCVI system can seamlessly upgrade the traditional analogue system without replacing existing coaxial cabling. The plug and play approach enables full HD video surveillance without the hassle of configuring a network. Multiple-formatsThe camera supports multiple video formats including HDCVI, CVBS and other two common HD analogue formats in the market. The four formats can be switched over through OSD menu or by PFM820(UTC controller). This feature makes the camera to be compatible with most end users’ existing HD/SD DVRs. ProtectionThe camera's outstanding reliability is unsurpassed due to its rugged design. The camera is protected against water and dust with IP67 ranking, making it suitable for indoor or outdoor environments. With working temperature range of -40 °C to +60 °C (-40 °F to +140 °F), the camera is designed for extreme temperature environments. Supporting ±30% input voltage tolerance, this camera suits even the mostunstable power supply conditions. Its 4KV lightning rating provides protection against the camera and its structure from the effects of lightning.
VIVOTEK FD9187-HT is indoor dome network camera equipped with a full HD sensor enabling resolution of 2560 x 1944 at 30 fps. And FD9187-HT also supports standard 1920x1080 resolution at 60 frames per second. Featuring VIVOTEK SNV and WDR Pro technology, FD9187-HT is capable of capturing high quality image whether in high contrast or low light environment. The FD9187-HT offers remote focus lens for different user scenario. IR illuminators are equipped with 50 meter effective range for better night visibility. For indoor applications, PIR sensor is built-in to detect unexpected events. Employing VIVOTEK's Smart Stream III technology and H.265 codec support, the FD9187-HT reduces bandwidth up to 90%* while keeping great image quality. Additionally, powered by VIVOTEK Smart Motion Detection technology, the FE9187-HT can learn how to differentiate between the motion of people and objects, which make it enable to reduce the false alarms and have higher accuracy.
Increase safety and reduce risk on board your transit vehicles with March Networks® RideSafe MT Series IP Recorders. These all-IP units deliver highly-reliable video surveillance recording and management in a compact, rugged design that is ideal for mid-sized vehicles – like student and patient shuttles and paratransit buses. Available in 4-channel and 6-channel models, the RideSafe MT Series solution enables operators to capture everything that’s happening on the bus, inside and out. Whether you have one or a thousand vehicles, this plug-and-play recorder can operate as a standalone unit programmable through embedded software, or be remotely managed and monitored daily using March Networks Command™ for Transit video management software. Video from the recorder can also be integrated with existing CAD and AVL systems and mobile routers. Key RideSafe MT Series features include: Front panel LEDs for easy recorder diagnostics, including operational, recording and video export status Embedded Linux OS, to ensure reliable and secure video recording Real-time health monitoring, alerting operators to camera, recorder and network issues before they affect performance Vehicle metadata integration from CAD/AVL systems and accelerometers for accurate re-enactments, driver monitoring and investigations Configurable recording policies based on schedule, motion, incident/event and other user-definable variables Powerful video management software, providing the advanced tools and features needed to manage entire fleets Automated video and data extraction over WiFi or 4G networks Extended thermal range (ETR) models available
The ConteraCMR® NVR Appliance is designed to offer powerful IP recording in an affordable, compact chassis. It is equipped with an on-board 8 or 16 channel PoE switch, with a recording capacity of up to 24 channels, allowing for Plug and Play connection with Arecont Vision and ONVIF cameras or RTSP video streams. With full integration to ConteraWS® (Web Services), the NVR Appliance offers centralised user management, single sign-on convenience, mobile apps and a web client that allows for easy remote connection to your recorders. Network setup is fast and easy using ConteraWS and eliminates the need for port forwarding or DDNS. The ConteraCMR NVR Appliance runs on a secure Linux® OS and comes preloaded with ConteraVMS® Server software as a turn-key solution.
The Evolution Stainless Steel cameras, part of Oncam’s Specialist Camera Range, are unique to the 360-degree video surveillance market as they are the only ones certified for tough environments, indoor and outdoor. The 05MP and 12MP versions have been specifically designed to meet the needs of customers operating in demanding environments such as Food Processing, Industrial, Maritime and Ports and Safe City applications. The cameras’ resilient Stainless Steel 316 housing is manufactured for enhanced corrosion resistance. The IP66, IP67, IP68, IP69K, and NEMA 4X and 6P ratings make the enclosure fit for harsh environments, while its IK10+ rating makes it resistant to impacts of 40 joules. The NSF certification and HCV EU mark make the camera range unique, guaranteeing compliance with standards for commercial food equipment in both North America as well as Europe. The only 360-degree fisheye camera in a stainless steel housing, Oncam’s new and improved camera range is available for surface and pendant mount installations. A matching stainless steel arm allows for wall, corner and pole mounting. Evolution 05 Stainless Steel: EVO-05-SS2 Evolution 12 Stainless Steel: EVO-12-SS2
The Evolution 180 Outdoor Camera is built upon Oncam’s expertise and heritage on 360-degree technology. It is specifically designed for applications that require a dewarped panoramic view of an outdoor scene, without blind spots, from a single sensor camera. The 12MP high-resolution sensor and the built-in 3D dewarped panoramic video provides industry leading Panoramic+ views. The true day/night functionality allows images to be produced in all lighting conditions, including additional IR lighting. The camera is IP66, IP67, IP68, IP69K and IK10+ rated, making it a robust design. Its versatile enclosure enables wall and pendant mounting, while the integrated adjustable mounting allows for an angling of up to 45°. When angled, Oncam’s Angle Compensation Technology (ACT) corrects the view, straightening vertical lines in the scene.
System OverviewWith upgraded H.265 encoding technology, Dahua Lite series network camera has efficient video encoding capacity, which saves bandwidth and storage space. This camera adopts the latest starlight technology and displays better color image in the condition of low illumination. It supports SD card storage, dust-proof function, waterproof function and vandal-proof function, complying to the standards of IP67 and IK10 (Supported by some select models). Functions Smart CodecWith advanced scene-adaptive rate control algorithm, Dahua smart encoding technology realizes the higher encoding efficiency than H.265 and H.264, provides high-quality video, and reduces the cost of storage and transmission. WDRWith advanced Wide Dynamic Range (WDR) technology, Dahua network camera provides clear details in the environment of strong brightness contrast. The bright and dark area can get clear video even in high brightness environment or with backlight shadow. StarlightDahua Starlight technology mainly applies to the environment of low illuminance, and it can provide clear colorful video. Even in the environment of ultra-low illuminance, the technology can guarantee the good image effect. IVSWith advanced video algorithm, Dahua IVS technology supports intelligent functions, such as tripwire and intrusion. Protection (IP67, IK10, wide voltage)IP67: The camera passes a series of strict test on dust and soak. It has dust-proof function, and the enclosure can works normal after soaking in 1 m deep water for 30 minutes.IK10: The enclosure can stand the punch more than 5 times from a 5 kg hammer falling from a height of 40 cm (Impact energy is 20J).Wide voltage: The camera allows ±30% input voltage tolerance (wide voltage range), and it is widely applied to outdoor environment with instable voltage.
Hanwha Techwin’s Wisenet PNM-9000VD multi-sensor/multi-directional camera provides quality images and modular lens configuration at an affordable price. This camera supports 30fps image capture and true 120 dB WDR without compromising frame rate for each of its two 5MP sensors. Each sensor has its own Wisenet 5 chip, providing a full suite of built-in video analytics including loitering, directional detection, fog detection, tampering, motion detection and objects entering or exiting an area.
VIVOTEK’s VAST 2 is an easy to use IP video management software (VMS). To meet the real-world needs of users, it comes with exciting advancements such as easy operation on single or multiple monitors, custom layout to accommodate both corridor and panorama orientations, rapid export of multi-channel video and the acquisition of VCA analytics & cybersecurity attack events from VIVOTEK cameras and substations (such as NVRs) in a hierarchical system structure. In the new version update of VIVOTEK’s video management software VAST 2, several advanced user-centered functionalities will be unveiled. The new features include the Deep-Learning Technology Smart Search II, Cybersecurity Management Solution, and License Plate Recognition Integration. With this update, users can enjoy the intuitive interface of VAST 2 while achieving a higher level of management efficiency. Three new user-oriented benefits will be highlighted in VAST 2： Smart Search II Building on Deep-Learning Video Content Analytics, the Smart Search II of VAST 2 allows users to quickly search for specific objects and people in the specified region. While enabling People Detection feature, only people-based activities will serve as event triggers. The security operator no longer needs to search through extensive footage for critical videos, thus improving both efficiency and effectiveness. Cybersecurity Management Solution Offering the complete end-to-end cybersecurity protection, the new VAST 2 is fully integrated with VIVOTEK cameras and NVRs and becomes a powerful cybersecurity central management site. The protection includes Instant Alert Notifications, allowing users to receive notifications automatically, and the Cyber Risk Dashboard to visually identify common types of cyber-attacks. In addition, users can filter attack logs according to a range of criteria, making it quicker to find abnormal events and take necessary actions to minimize risks. License Plate Recognition Integration Now, the new VAST 2 is fully integrated with VIVOTEK’s LPR/ Automatic Number-Plate Recognition (ANPR) camera, IB9387-LPR. Users can see the live images with selected information, such as confidence level or black list status, which can in turn become a trigger source in Alarm Management, making it easy to intelligently manage license plate data.
IDIS has extended its award-winning DirectIP® camera range with the introduction of a new flagship 2MP 36x Lightmaster IR PTZ outdoor-ready camera for fast and precise pan/tilt/zoom performance.The new DC-S6283HRX Lightmaster builds on the specification of IDIS’s successful PTZ models, with a high-grade lens combined with advanced sensor technology and finely tuned, client-side image processing, allowing the capture of vivid, true colour video in extremely low light conditions. Excellent performance at long distances, with minimum motion blur, makes the DC-S6283HRX ideal for perimeters, shopping centres, stadia, outdoor spaces and public area applications.The camera benefits from IDIS’ signature true plug-and-play, one-click configuration and features 36x optical zoom, IR up to 350 metres, true wide dynamic range (WDR), digital image stabilization (DIS), a built-in heater and a vandal proof casing.“Designed for 24/7 accurate pan/tilt/zoom operation this new Lightmaster PTZ camera delivers unparalleled performance and exceptional detail when zooming. The camera is equipped with a variety of intelligent features and can move between pre-set positions and zoom in automatically in response to detected events. The result is maximum protection for a wide range of applications,” said James Min, Managing Director, IDIS Europe.The user experience is enhanced with IDIS Smart UX Controls, which is an award-winning, advanced and simple to use interface featuring intuitive slingshot and rubber-band style controls. Operators can smoothly and seamlessly follow moving objects in real-time with ground-breaking accuracy by panning images at different speeds and in different directions - literally without lifting a finger - by using a CTRL button and mouse combination.The camera uses H.264 and H.265 combined with IDIS Intelligent Codec to deliver significant bandwidth and storage savings and benefits from low Power over Ethernet (PoE) energy consumption.The risk of gaps in footage is eliminated with IDIS Smart Failover. In the event of network instability, the camera automatically records to an integral 256GB SD card and transfers data to the network video recorder (NVR) once connection is restored, which avoids the need for engineer call outs to retrieve footage.“We are listening and responding to customer demand with our new 2MP PTZ Lightmaster camera, providing an easy to deploy, low-storage and bandwidth solution for wide area coverage and perimeter detection,” said James Min, Managing Director of IDIS Europe. “It’s particularly suited to town centre and city surveillance, stadia, outdoor retail parks, manufacturing and logistics sites and high-security perimeter applications where outstanding performance and ease-of-use combined with a low total cost of ownership are becoming essential.”
AI series products adopt the most advanced AI technologies, including deep learning algorithms that primarily target people and vehicles, which provides higher flexibility and accuracy for end-users. This enables the Dahua AI series to offer various advanced applications such as Face Recognition, Metadata, traffic data statistics, etc. The complete lineup of Dahua AI includes network (PTZ) cameras, network video recorders, servers, and more devices. Beyond seeing the world, the power of AI allows devices to perceive the environment and understand the world in a better way. System Overview Dahua PTZ AI network camera adopts advanced CNN deep learning algorithms to support face recognition with high accuracy. The Dual 4MP Starlight Smart Capture Camera consists of panoramic camera and PTZ camera. Panoramic camera captures panoramas, and then PTZ camera takes detailed snapshots of objects and keeps tracking objects after rule violations occur. This camera possess wide monitor range and PFA algorithm that can always present a clear, focused image while zooming. Functions Dual PTZ systemPanoramic camera and Detail camera of the dual PTZ system can be adjusted horizontally and vertically. Face RecognitionOnce facial features are extracted from captured faces, they are stored in a database where they can be easily searched and compared against other images. Once a successful match is found, the system outputs the result. The Dahua Face Recognition camera supports a built-in database that stores up to 10,000 facial images, helping the camera achieve realtime face capture and comparison. Starlight TechnologyFor challenging low-light applications, Dahua's Starlight Ultra-low Light Technology offers best-in-class light sensitivity, capturing color details in low light down to 0.001 lux. The camera uses a set of optical features to balance light throughout the scene, resulting in clear images in dark environments. PFA TechnologyPFA technology has innovatively introduced new methods of judgment to ensure the accuracy and predictability of the direction of subject distance adjustment. The result is a set of advanced focusing algorithms. PFA ensures clarity of the image throughout the process of zooming and shortens focus time. The realization of PFA technology substantially improves user experience and increases product value. MetadataMetadata is feature attribute information extracted from a target object which can be used for data retrieval. There are four kinds of metadata supported by Dahua PTZ AI camera: human face, human body, motor vehicle and non-motor vehicle metadata. Facial information includes gender, age, glasses, masks, beards, etc. Human body information includes hat, top, top color, bottom, bottom color, bag, etc. Motor vehicle information includes plate color, type, vehicle color, sunshield, ornament, calling, seatbelt, smoking, annual inspection sticker, etc. Non-motor vehicle information includes type, color, top type, top color, people number, etc. Smart trackingHuman, motor vehicle, and non-motor vehicle, or their combinations can be set as objects. Once the objects selected trigger detection rules (like tripwire and intrusion), the detail camera will track them automatically. Perimeter ProtectionAutomatically filtering out false alarms caused by animals, rustling leaves, bright lights, etc. Enables system to act secondary recognition for the targets. Improving alarm accuracy. InteroperabilityThe camera conforms to the ONVIF (Open Network Video Interface Forum) specifications, ensuring interoperability between network video products regardless of manufacturer.
VIVOTEK ‘s new CC9381-HV is a 180-degress panoramic network camera, featuring its compact design and high-quality image capability, making it suitable for a wide array of both indoor and outdoor environments, such as boutiques, convenience stores, banks, schools and homes. Along with offering amazing 180° HFOV coverage, CC9381-HV offers up to 20 fps at 5-Megapixel resolution (30 fps at 5MP with WDR Off). This Panoramic Network Camera also incorporates other value-added features.With IR built-in 180° IR illuminators up to 15 meters, no matter day or night, light or dark, the new CC9381-HV always provides complete video security. Further, due to the SNV technology, areas of low light visibility are no longer an issue either. Equipped with WDR Pro technology, the CC9381-HV enable the camera to maintain optimal image quality and unparalleled visibility in high contrast lighting environments, as well as combined both H.265 and VIVOTEK Smart Stream III, it can reduce bandwidth and storage consumption more than 90% compared to traditional H.264 without smart streaming. In addition to its versatile coverage and features, the CC9381-HV is safeguarded by Trend Micro IoT Security to provide users with higher levels of network protection.
Consider your security needs met. The experts in thermal and perimeter security have packed everything you need into one affordable, easy-to-install camera. The FLIR Saros DH-390 Dome Camera includes IR and visible illuminators, plus Lepton thermal sensors to allow you to see in any condition. And with high-resolution video, you’ll never miss a thing.
Hikvision has launched a new Fisheye IP camera series (DS-2CD63X5G0) with AI. This 360˚ panoramic camera uses the deep learning technology to deliver a more accurate heat map functionality. It gives an enhanced view of its surroundings – and is especially useful in large retail applications. The cameras’ 360˚ panoramic image of the scene before it, means the user can see a wider area much more clearly. This is enhanced by independent control of a three-way infrared light, which can be separately configured to reduce the amount of ‘reflective’ wall space. This improves image quality, especially when placed in a corner location. The deep learning algorithm focuses only on human targets, improving the accuracy of the heat map functionality. This means users can see ‘hotspots’ in a space, showing areas that people visit, or pass, the most. An added layer to the heat map visualisation makes it a lot clearer than previous technologies, presenting more information in a clearer way. Despite the high quality of the images, the cameras boast extremely light bandwidth, saving storage and costs by using H265+ compression technology. They also support Multiple Expansion Modes, with up to 15 live view display modes available, designed for three different mounts. This means they can be more easily adjusted to meet the users’ exact preferences, and improve their browsing experience. Other features include: New Immervision lens (only 12MP, 1.29mm lens model) Up to 12MP resolution 120 dB WDR Up to 15m IR range Built-in microphone and speaker Smart features: 6 behaviour analyses, and 3 exception detections IK10/IP66 available. The cameras will be a useful addition to retail solutions, with heat mapping helping owners to understand customers’ psychology and identify which products attract the most attention on the shop floor. They can also be used in other large area applications, like train stations and public squares. The series will also be a boon to installers, with the ability to achieve monitoring which has no ‘dead angles’, making the solution more efficient and reducing installation costs. “We pride ourselves on continually advancing our technology and how it is implemented”, says Peter Guan, Director of Channel Sales and Marketing for Hikvision Europe. “This new Fisheye camera will provide clear flow information that will help users to make the right business decisions to make their spaces much more profitable.”
1 channels, Data Input, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, 1 RJ-45 10 M / 100 Mbps adaptive Ethernet interface (PoE), 30 fps, PTZ, 80 x 39 x 90,Add to Compare
Audio Input, Alarm Input, H.264, TCP/IP, UDP, IPv4, IPv6; HTTP, RTP, RTSP, NFS, ISCSI, DHCP, NTP, SMTP, SNMPv1, SNMPv2c, SNMPv3, UPNP, SADP, PPPoE, DNS, FTP; IP Server, Dyndns, PeanutHull, HiDDNS, NO-IP; PSIA, HIKCGI, ONVIF., 1 10 M / 100 M /1000 Mbps Ethernet interface, 1920 x 1080, 60 fps, Linux, 200 x 123 x 39, 1,500, 13 W, 12 V DC, -10 ~ +55 C (14 ~ 131 F), 10 ~ 90Add to Compare
8 channels, Data Input, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, SADP(IP Finder),UDP, RTP and NTP, 10/100/1000 Mbps self-adaptive Ethernet interface, 1920 x 1080, 440 x 340 x 70, 5,200, 50 W, 100 ~ 240 V AC, -10 ~ +55 C (14 ~ 131 F), 10 ~ 90Add to Compare
1 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100Mbps adaptive Ethernet, 30 fps, 315 × 45 × 200,Add to Compare
4 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100Mbps adaptive Ethernet, 30 fps, 315 × 45 × 200,Add to Compare
8 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100M/1000Mbps adaptive Ethernet, 30 fps, 315 × 45 × 200,Add to Compare
16 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100M/1000Mbps adaptive Ethernet, 30 fps, 440 × 45 × 274,Add to Compare
1 channels, Audio Input, Alarm Input, H.264, TCP / IP, UDP, IPv4, IPv6; HTTP, RTP, RTSP, NFS, ISCSI, DHCP, NTP, SMTP, SNMPv1, SNMPv2c, SNMPv3, UPNP, SADP, PPPoE, DNS, FTP; IP Server, Dyndns, PeanutHull, NO-IP; PSIA, 1 RJ-45 10 M / 100 M /1000 Mbps adaptive Ethernet interface, 1920 x 1080, 1 / 16 ~ 25 / 30 / 50 /60 fps, 200 x 123 x 39, ? 1500, 12 VDC, ? 13 W, -10 ~ +55 C (-14 ~ +131 F), 10 ~ 90Add to Compare
Audio Input, Alarm Input, VGA - 2 channel, CVBS - 4 channel, H.264/MPEG-4, 1 RJ45 10/100/1000Mbps self-adaptive UTP Ethernet interface, 440 x 340 x 70, 5200, 50 W, 100 ~ 240V AC, -10 ~ +55 C (-14 ~ +131 F), 10 ~ 90Add to Compare
4 channels, Audio Input, Alarm Input, H.264, SADP (IP finder), UDP, RTP and RTSP , 1 RJ-45 10 M / 100 M /1000 Mbps adaptive Ethernet interface, 25 fps / 30 fps, 315 x 201 x 45, 2000, 8 W, 12 V DC, -10 ~ +55 C (-14 ~ +131 F), 10 ~ 90Add to Compare
4 channels, Audio Input, Alarm Input, H.264, SADP(IP Finder), UDP, RTP and RTSP , 1RJ-45 10 M / 100 Mbps self-adaptive UTP Ethernet interface, 4CIF , 25 fps / 30 fps, 201 x 136 x 42, 2000, 8 W, 12 V DC, -10 ~ +55 C (14 ~ 131 F), 10 ~ 90Add to Compare
2 channels, Audio Input, Alarm Input, H.264, SADP (IP finder), UDP, RTP and RTSP, 1 RJ-45 10 M / 100 M /1000 Mbps adaptive Ethernet interface, 4CIF, 25 fps / 30 fps, 315 x 201 x 45, 2000, 8 W, 12 V DC, -10 ~ +55 C (-14 ~ +131 F), 10 ~ 90Add to Compare
4 channels, Data Input, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, 1 RJ-45 10 M / 100 Mbps adaptive Ethernet interface (PoE), 30 fps, PTZ, 114 x 48 x 128,Add to Compare
8 channels, Data Input, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, 1 RJ-45 10 M / 100 M /1000 Mbps adaptive Ethernet interface, 30 fps, PTZ, 315 x 45 x 200,Add to Compare
Browse Video Servers (IP Transmission) / Video Encoders
Video server (IP transmission) products updated recently
For those of you old enough to remember, video matrix switchers were once the heyday of surveillance camera control. These cumbersome antiques were at the heart of every major video surveillance system (CCTV at the time) in premier gaming properties, government installations and corporate industrial complexes. They required more physical labour to construct and configure than perhaps the pyramids – maybe not – but you get the picture. And then digital video made its way in to the market and everything changed, transforming the physical demands for camera control and management from a hardware-centric to a software driven process. We’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely There’s no doubt that this migration also presented significant challenges as many security professionals often struggled with all things IT and software programming being one of the industry’s soft spots. Fortunately, we’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely. However, the complexities of today’s VMS functionality can be intimidating for anyone tasked with installing one of these systems given all of the user-defined options available from the simplest camera sequencing and bandwidth allocations to mobile management and enterprise level integration. This is where truly advanced VMS solutions need to shine on both the operations and the design/build sides of the equation. Smart VMS design There are more solutions products labelled “VMS solutions” out there than ever before. The issue is the fact that many of these “solutions” really don’t fall into the category of a true VMS by today’s standards but offer basic camera and NVR control. No doubt that there is a place for such software programs in the market. However, VMS solutions from the likes of OnSSI and other industry-leading companies offer distinct and superior management and control capabilities for demanding security and business intelligence applications. Perhaps of equal importance, these top-tier VMS solutions incorporate provisions for installers, so they have a clear and easier implementation path. OnSSI offers VMS solutions with smart camera drivers Here are seven attributes that can assist with the design and implementation of an advanced VMS solution: 1) Open architecture platform We need the ability to easily integrate with other systems and scale for future developments and physical system growth The ability to easily integrate with other systems and scale for future developments and physical system growth is largely dependent on a systems platform architecture. Here’s where VMS solutions with open architecture provide a distinct advantage. Open-architecture solutions expand functionality by facilitating greater integration between multiple systems and components. This not only makes VMS solutions with open architecture easier to implement, it makes them extremely cost-efficient by eliminating the need for proprietary solutions. Open architecture systems also provide adherence to industry standards such as ONVIF and PSIA, as well as compression formats such as H.265 and MJPEG, and help ensure system integration and support of an extensive range of manufacturers’ cameras and off-the-shelf hardware. Be wary of VMS solutions with limited camera manufacturer support. 2) Simple licensing processes and pricing Camera licenses and pricing is always a touchy subject, as any misunderstanding of a specific VMS solutions’ licensing terms can prove to be costly after the fact. And it often seems that some VMS suppliers have gone to great lengths to complicate the process as to obscure actual Total Cost of Ownership (TCO). Perhaps the most direct, simple and straightforward camera licensing and pricing method is to have one license per IP address used by each camera/encoder on multi-channel devices. These should be perpetual licenses with no required annual fees or subscriptions. Additionally, the licensing agreement should be all inclusive without added fees for multiple clients, failover servers, active directory support, I/O devices, redundant management servers, technical support or security patches and updates. 3) Mixing and matching camera license types The ability to mix and match different camera license types within the same system helps facilitate a seamless and simple migration of new and pre-existing systems with minimal downtime or interruption in operation. The ability to mix and match camera licenses not only saves valuable design and installation time, it can provide considerable savings when integrating large, multi-tenant systems. Mix and match capabilities also allow system designers to apply specific feature sets to specific groups of cameras to best leverage functionality and budgets, as well as providing the flexibility to implement an on-site, virtual, or cloud-based VMS solution, without any additional cost. 4) Auto camera detection and configuration Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements. This functionality allows installers to instantly locate cameras on the network and configure them centrally so they can easily replace older cameras while seamlessly retaining video recorded from them. The auto detection capability should also include the ability to detect and import CSV files, which can then be stored and used to configure camera templates for future camera installation profiles. 5) Smart camera driver technology VMS solutions with smart camera drivers offer valuable assistance during system implementation, and any time new cameras are added to the network or replace older models. Manufacturer-specific smart camera drivers expand the range of model-specific static drivers. Instead of storing the device’s information (codecs, resolutions, frame rates, etc.) statically, a VMS with smart camera drivers queries devices for their capabilities using the manufacturers’ proprietary protocol. All that is required for configuration is that the camera is available on the network. Smart camera drivers eliminate the need to wait for model-specific drivers or installation of driver packs, allowing for newly released cameras to be used immediately. Network security is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers 6) Importance of network security Network Security is perhaps the greatest challenge faced by industry professionals today Network security is perhaps the greatest challenge faced by industry professionals today. This is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers. New security developments to look for include TLS 1.2 encryption protocols for camera-to-server communications (SSL 3.0 supported for older cameras), as well as server-to-server communications. Additional safeguards to consider include: randomised video databases with no camera identification information to secure recorded data; support for Active Directory authentication; AES encryption between servers and clients; and AES encrypted exporting. 7) Automatic updates Regardless of the supplier you select for your VMS solution, they should be consistently providing new updates and security patches on a frequent if not regular basis. Keeping up with these updates can be a burden and are often overlooked leading to system failures and breeches. Advanced VMS solutions now feature automatic update service checks on a system-wide basis, eliminating the need to manually update individual servers and devices. This ensures that your VMS system always has the latest drivers, fixes and updates which assures overall security while reducing TCO. So next time you’re getting a demo of the latest and greatest VMS solution, remember to ask what it offers in terms of design and implementation tools. Half the battle with new technologies is getting them installed and working properly. Without the right tools to accomplish these critical first steps, all the functionality in the world will do you little good.
It amazes me how in a few short years security systems have gone from simple, dumb cameras witnessing events to intelligent eyes, ears, speech and touch solutions that boost situational awareness far beyond human capabilities. It seems the only senses missing from the equation now are smell and taste. And who knows, someone might be working on those in a lab somewhere right now. But what’s really fascinating to me is how the Internet of Things (IoT) has opened a world of possibilities for transforming security technology into something new yet again. With IoT we’re able to push and pull nuggets of intelligence from sources we never considered before: environmental sensors, pressure plates, door lock timers and much more. It’s helped us break through the constraining mindset that security systems are strictly single-purpose. With interconnectivity at the core, we’re starting to imagine myriad ways to apply these tools to challenges outside the realm of security. Here are just a few examples. Flood management assistance Network camera adds another dimension and timeliness to flood management by helping responders investigate remotely As recent hurricanes and floods have shown, water damage can be devastating to a community. That’s why some municipalities are using their city surveillance cameras in conjunction with water sensor to proactively address the problem. Water sensors collect data from multiple sources such as rain gutters, sewer systems and pump stations, in order to monitor fluctuations in water levels and water quality. If an alert triggers, having a network camera in proximity to visually verify the situation helps responders determine the best course of action. For instance, if multiple water detection sensors trigger alerts simultaneously or sequentially over a large area it’s probably due to natural runoff from recent rainfall. But without eyes on the scene, how can you be sure? Network camera adds another dimension and timeliness to flood management by helping responders investigate and identify the cause of a trigger remotely. It might be a fire hydrant spewing water, a water main break or even a chemical spill. With video streaming live to the command center, staff can remotely inspect the area, determine the cause of the trigger and decide whether remediation is required, thus avoiding the expense of dispatching an investigative crew to a non-event. Some municipalities are using their city surveillance cameras in conjunction with water sensor to proactively address the problem Environmental control assistance Data centers house the lifeblood of a business so it’s no wonder why companies work hard to protect them. We’re all familiar with the integration of network cameras with access control systems to visually verify who is actually using the credentials. Network camera adds another dimension and timeliness to flood management by helping responders investigate and identify the cause of a trigger remotely But there’s another aspect to protecting data centers and that’s environment control. Data centers need to maintain optimum humidity and temperature for the racks of electronics. When environmental sensors in the facility detect out-of-norm ranges technicians can remotely command a network camera to zoom in on the gauges and help them determine whether remediation might be necessary. Coupling network cameras with other sensors in the data center can provide visual confirmation of other conditions as well. For instance, every time a data rack door-open-close sensor detects an event it can trigger the camera to pan to the location and stream video to security. Some data centers employ weight sensors at the doorway to weigh personnel and equipment as they enter the room and when they exit to ensure no additional hardware is being taken out of the facility or left inside without permission. Any discrepancy would trigger the camera to zoom in for a close-up of the individual’s face and send a visual alert and ID information to security. Roadway management and parking assistance Network cameras have long played a part in city-wide traffic management. Adding video analytics and integration with network sensors, makes those cameras that much smarter and versatile. They can detect cars driving in bike lanes or driving in the wrong direction and capture license plates of offenders. Their ability to detect anomalous traffic flow patterns can be integrated with car counting sensors, networked electronic road signs and traffic light systems to automatically redirect vehicles to alternate routes. They make great, intelligent parking lot attendants, too. Working in conjunction with weight sensors network cameras can count vehicles coming into and leaving a lot or garage and verify when the facility has reached capacity. License plate recognition and video analytics can be used to ascertain that a vehicle entering a reserved parking space doesn’t match the credentials and vehicle attributes in the database. With the addition of noise sensors and audio analytics, network cameras can improve roadway and parking facility safety by detecting and identifying specific sounds – breaking glass, car alarms, gun shots, and aggressive speech – and triggering a visual alert to first responders. Network cameras can improve roadway and parking facility safety by detecting and identifying specific sounds and triggering a visual alert to first responders Shopper experience assistance In the early days of online shopping, e-tailers designed their sites to replicate the in-store customer experience. In an ironic turn of events, today brick-and-mortar stores are trying to mirror the online shopping experience. To do so, they’re turning their security systems into adjunct sales assistance. With network video and audio system automation they can recognise and acknowledge loyal customers with personal greetings. Retailers are applying people counting video analytics to checkout activity to create rules-based consistency in customer service With heatmapping analytics they can measure how much time a customer spends in a specific department or observe how they walk through the aisles of the store. They can track shopping behaviors such as items looked at that made it into the cart or didn’t, or whether a customer actually checked out or left the merchandise behind. By capturing these shopping patterns and trends retailers can shape a more positive, more profitable customer shopping experience. For instance, integrating video analytics with point of sale systems and RFID sensors on merchandise tags can result in timely alerts to sales associates to recommend additional merchandise. This is a case of emulating how e-tailers let the customer know that other customers who bought X often also purchased items Y and Z. Or to avoid disappointing customers due to stock outages, retailers are linking weight sensors and video analytics to make sure their shelves are well-stocked and if not, quickly alert associates to what items need to be restocked. Capturing business intelligence Retailers are also using video cameras to monitor checkout queues and trigger automated announcements over the public-address system, closed system such as smartphones or other wireless communications devices that checkers are needed rather wait for a person to call for backup. IoT laid the groundwork for network security solutions to seamlessly integrate with other IP-based technologies, sensors and programs They’re applying people counting video analytics to checkout activity to create rules-based consistency in customer service. While retailers will always use their surveillance camera for loss prevention, they’re finding that integrating traditional technology in new ways can yield even bigger returns. Linking network video surveillance, video analytics, network communications system and sensors with point-of-sale systems and customer loyalty databases, retailers are capturing the business intelligence they need to get back in the game and make brick-and-mortar a greater overall experience than online shopping. A natural cross-over technology This trend towards integration has forever changed how organisations view their investment in security technology. The intelligence and versatility of a tool that can see, verify and analyse what’s happening in real-time is spurring users to tap its cross-over potential for a host of other tasks that could benefit from more astute situational awareness – everything from manufacturing and equipment maintenance to logistics, inventory control and beyond. IoT laid the groundwork for network security solutions to seamlessly integrate with other IP-based technologies, sensors and programs. How we capitalise on that connection is only limited by our imagination.
Consolidation persisted in the physical security industry in 2018, and big companies such as Motorola, Canon and UTC continued to make moves. Also among the mergers and acquisitions (M&A) news in 2018 was a high-profile bankruptcy (that ended well), continuing consolidation in the integrator market, and the creation of a new entity called “LenelS2.” Here’s a look at the Top 10 M&A stories in 2018: 1. Motorola acquires Avigilon Motorola Solutions announced in February that it had entered into a definitive agreement to acquire video surveillance provider Avigilon in an all-cash transaction that enhances Motorola Solutions’ portfolio of mission-critical communications technologies. Avigilon products are used by a range of commercial and government customers including critical infrastructure, airports, government facilities, public venues, healthcare centers and retail. The company holds more than 750 U.S. and international patents. 2. UTC Climate, Control & Security buys S2 Security UTC Climate, Controls & Security agreed in September to acquire S2 Security, a developer of unified security and video management solutions. UTC subsequently combined S2 with its Lenel brand to create LenelS2, “a global leader in advanced access control systems and services” with “complementary strengths.” 3. Costar Technologies acquires Arecont Vision after bankruptcy Arecont Vision, the provider of IP-based megapixel camera and video surveillance solutions, announced in July that the acquisition by Costar Technologies, Inc. of its assets had been approved by the bankruptcy court. After the closing of the sale, the company began operating as Arecont Vision Costar, LLC and is part of Costar, a U.S. corporation that designs, develops, manufactures, and distributes a range of products for the video surveillance and machine vision markets. 4. Allegion acquires access control company ISONAS Allegion plc, a security products and solutions provider, agreed in June to acquire ISONAS through one of its subsidiaries. ISONAS’ edge-computing technology provides access control solutions for non-residential markets. ISONAS' devices – like its integrated reader-controllers – utilise power over ethernet, making them easy to install and cost effective as they utilise existing customer infrastructures. The company is based in Boulder, Colo. 5. HID buys Crossmatch for Biometrics HID Global announced that it had acquired Crossmatch, a provider of biometric identity management and secure authentication solutions, from Francisco Partners. Crossmatch’s portfolio of products includes biometric identity management hardware and software that complement HID’s broad portfolio of trusted identity products and services. 6. BriefCam announces acquisition by Canon BriefCam, a global provider of video synopsis and deep learning solutions, announced its acquisition in May by Canon Inc., a global digital imaging solutions company. The addition of BriefCam to Canon’s network video solutions products portfolio complements the Canon Group’s previous acquisitions of Axis Communications and Milestone Systems. 7. Allied Universal acquires U.S. Security Associates Allied Universal, a security and facility services company, finalised its acquisition of U.S. Security Associates (USSA) in October, further building on its position in the security services industry. This acquisition includes Andrews International (including its Government Services Division and Consulting and Investigations and International Division) and Staff Pro. 8. Johnson Controls acquires Smartvue Corp. Johnson Controls announced in April that it had acquired Smartvue, a global IoT and video provider that empowers cloud video surveillance and IoT video services. The addition of the Smartvue cloud-based video platform will enhance Johnson Controls’ offering of an end-to-end, smart cloud-based solution that can provide superior business data and intelligence to customers and added value to partners. 9. ADT acquires Red Hawk Fire & Security (and others) ADT Inc.’s acquisition of Red Hawk Fire & Security, Boca Raton, Fla., was the latest move in ADT Commercial’s strategy to buy up security integrator firms around the country and grow their footprint. In addition to the Red Hawk acquisition, announced in mid-October, ADT has acquired more than a half-dozen security system integration firms in the last year or so. 10. Convergint Technologies continues to acquire Convergint Technologies announced in August the acquisition of New Jersey-based Access Control Technologies (ACT), bringing further electronic security systems experience to Convergint's service capabilities. Convergint has strategically grown its service footprint across the United States, Canada, Europe and Asia Pacific through strong organic growth and the completion of 18 acquisitions since early 2016. And it continues: Convergint announced acquisition of SI Technologies, Albany, N.Y., in November and Firstline Security Integration (FSI), Anaheim, Calif., in December. (And Convergint itself was acquired in February by private equity group Ares Management.)
The security behind financial securityDownload
Nine ways to make your retail security system work harderDownload
Financial institutions require future-ready physical security technologiesDownload
Dahua Technology’s Safe City Solution chosen by the local government to make Brienon-sur-Armançon safer
- Dahua Technology’s Safe City Solution chosen by the local government to make Brienon-sur-Armançon safer
- Airbus’ STYRIS, Vessel Traffic Services upgrades the Port of Sydney
- March Networks’ video solution used at Quik-E c-stores to protect profits and recoup losses
- Rasilient completes Phase II of the video surveillance system upgrade at Fairbanks International Airport