Video Servers (IP Transmission) / Video Encoders(757)
IDIS has launched the DirectIP Super Fisheye 5MP Compact camera (DC-Y6513RX), further extending its popular Super Fisheye range. IDIS fisheye cameras are some of IDIS’s best-selling models thanks to their exceptional, dual-side de-warping and Smart UX Controls, allowing for smooth and intuitive panning, tracking, and zooming with award-winning ease and accuracy. The introduction of the DC-Y6513RX reflects IDIS’s continued commitment to market-responsive innovation and meets installer and end-user requests for a more compact 360° camera that can capture high-definition images in all lighting conditions without blind spots. It also lets customers to benefit from heat mapping without the hassle and cost of additional appliances or analytics software. A broad, high-specification camera, in a compact form, the new Super Fisheye 5MP builds on the success of earlier IDIS’s Super Fisheye cameras, including the award-winning 12MP DC-Y3C14WRX. It meets industry demands for clear and accurate image capture, long-term performance and reliability, exceptional de-warping, and a low total cost of ownership. “The new Super Fisheye 5MP Compact is a great new choice for wide area surveillance and is already contributing to successful project wins for our integration partners in retail applications, eating-out sectors, education, healthcare and other environments where customers benefit from cost-effective and simple to use analytics. “Its high performance 360° capability means it can replace multiple fixed-lens cameras and provide complete and clear image capture in a variety of lighting conditions. For our integrator partners, IDIS’s value proposition, fast and seamless installations and performance guarantees have the potential to increase margins, while end-users benefit from savings in terms of lower upfront equipment and installation costs, with reduced maintenance expense and video storage burden,” said James Min, Managing Director, IDIS Europe. The IDIS 5MP IR Compact Fisheye features include: IDIS Smart UX Controls for very high accuracy and ease-of-use, with intuitive “rubber-band” style control to deliver a new level of operator experience. Super smooth de-warping on the camera as well as on desktop applications and mobile devices for added convenience and out-of-hours monitoring. Quick Controls allowing operators to use the CTRL button with a combination of left, right, and wheel mouse clicks for easier and faster investigations. Full protection against video loss thanks to built-in IDIS Smart Failover guaranteeing continued recording in the event of network instability, overload or failure. IDIS Intelligent Codec that delivers H.264/H.265 dual codec performance and significant bandwidth and storage savings, while eliminating the need to upgrade hardware. Quick and simple installation with DirectIP NVRs and true plug-and-play functionality. Reduced potential for cybersecurity loopholes with one-click configuration eliminating the need to manage individual passwords for multiple devices. Heat-mapping to more easily identify hot-spots, dead zones and bottlenecks in retail and eating-out sectors. Intelligent video and event trigger functions including motion detection, active tampering and trip zones. “The IDIS Super Fisheye 5MP Compact camera also scores highly on essential features including, built-in LEDs for IR operation in full darkness (up to 15m); 8 zone privacy masking; true wide dynamic range; ONVIF support; built-in speakers and microphone allowing 2-way communications; industry-leading 5-year free warranty. All these factors come together to deliver a lower cost of ownership to our customers,” continued James Min. IDIS offers an end-to-end, single sourced video offering that delivers unrivalled plug-and-play simplicity, combined with highest-quality performance, compatibility, and a low total cost of ownership and features industry-leading warranties. IDIS will be demonstrating its Super Fisheye range and Total Solution line up12 at IFSEC International on 18-20 June at ExCeL, London, UK.
Dahua AI series products adopt the most advanced AI technologies, including deep learning algorithms that primarily target people and vehicles, which provides higher flexibility and accuracy for end-users. This enables the Dahua AI series to offer various advanced applications such as Face Recognition, ANPR, Metadata, People Counting, traffic data statistics, etc.The complete lineup of Dahua AI includes network (PTZ) cameras, network video recorders, servers, and platform management products. Beyond seeing the world, the power of AI allows devices to perceive the environment and understand the world in a better way. System OverviewPro AI series contains Face Capture, Perimeter Protection and People Counting functions. Powered by deep-learning Artificial Intelligence algorithms, significantly improved accuracy. Active Deterrence and Full Colour camera are also in this series. Meanwhile, the series features starlight and smart IR technology. This series fully protected from dust and water, certified to IP67 standard. Functions Perimeter ProtectionDahua’s Perimeter Protection functions significantly improved accuracy. Perimeter Protection reduces false alarms and decreases pixel count requirements for object detection. Perimeter Protection features custom tripwires based on object type for automation in limited access areas such as pedestrian or vehicle-only zones. This combination of advanced AI analytics and real-time alerts to a desktop or to a mobile client reduces system requirements and resources resulting in greater surveillance system efficiency. People CountingPeople Counting function uses advanced image processing technology to capture depth information from within images. The camera pairs this information with deep learning algorithms to analyze and detect human bodies and track target objects in real time. The camera provides statistics for separate individuals’ entrance and exit with up to 95% counting accuracy. MetadataMetadata is feature attribute information extracted from a target object which can be used for data retrieval. Dahua face detection camera can extract six facial attributes and output the metadata for analysis. ePoE technologyThe ePoE technology of Dahua, designed internally, adopts advanced 2D-PAM3 coding modulation from physical layer, and realizes full duplex transmission over 800 meters at the speed of 10Mbps, or 300 meters at the speed of 100Mbps via Cat 5 or coaxial cable media. Besides, it supports PoE and PoC power supply technology which has greatly simplified construction and wiring. Dahua ePoE technology offer a new way to accomplish long distance transmission between IP camera and network switch. It allows more flexible surveillance system design, improves reliability and saves construction and wiring cost. Protection(IP67, wide voltage)The camera allows for ±30% input voltage tolerance, suitable for the most unstable conditions for outdoor applications. Its 6KV lightning rating provides effective protection for both the camera and its structure against lightning. Subjected and certified to rigorous dust and immersion tests (IP67) , the camera is the choice for installation in even the most unforgiving environments.
The Contera NVR Appliance from Arecont Vision Costar is designed to offer powerful IP recording in an affordable, compact chassis. The Contera NVR Appliance is equipped with an on-board 8 or 16 channel PoE switch, that can be upgraded to 24 channels, allowing for Plug and Play connection with ConteraWS® or ONVIF cameras. With full integration to ConteraWS® Web Services, the Contera NVR Appliance offers centralised user management, single sign-on convenience, mobile apps and a web client that allows for easy remote connection to your recorders. Network setup is fast and easy using ConteraWS® Web Services, and eliminates the need for port forwarding or DDNS. The Contera NVR Appliance runs on a secure Linux OS and comes preloaded with ConteraVMS® Server software as a turnkey solution.
March Networks’ new ME3 Pendant IR PTZ camera delivers uncompromising security for large indoor and outdoor spaces, as well as essential features to ensure high reliability, clear image capture and storage efficiency. Ideal for large-footprint environments such as parking lots, big box stores and transit stations, the camera incorporates electronic image stabilisation and HDR, so recorded video is always crisp. Universal Power over Ethernet (UPoE) ensures redundancy and zero downtime by switching to PoE when a camera loses power. And built-in PTZ auto-tracking uses motion detection to automatically track a person or object, keeping the image centred and in focus. Software updates are quick and easy to apply using the mass management feature available in Command Enterprise software, while PTZ-optimised motion histograms speed search capabilities. The 3MP PTZ includes a 40x zoom lens to capture objects 25% further away than industry-standard PTZs, and IR LEDs for uniform illumination in total darkness at a distance of more than 650 feet/200 metres. It also incorporates a Low Bit Rate compression mode to improve bandwidth and storage efficiency by as much as 50% when the camera is in its home position. The ME3 Pendant IR PTZ is protected by a weather-proof enclosure, and generates an alert in the event someone attempts to obstruct or move the camera. It comes with a variety of mounting options, including a 1.5” NPT wall mount and short pendant mount, both with back boxes.
VIVOTEK’s FE9391-EV is the next generation of market-leading 12-Megapixel 360° panomorph network camera, featuring a detailed 12-Megapixel CMOS sensor which guarantees superb image quality. Utilising the latest in panomorph lens technology for 180° panoramic view (wall mount) or 360° surround view (ceiling/wall/floor mount) with zero blind spots, the camera is able to provide comprehensive coverage of open areas such as airports, shopping malls, parking lots, retail stores, offices and more. Removable IR-cut filter The FE9391-EV (IP66, IK10 rated) is the successor to FE8391-V in the VIVOTEK 360° surround view family. The new model is equipped with a removable IR-cut filter and WDR Enhancement technology, allowing the camera to maintain optimal image quality around the clock for unparalleled visibility under high-contrast lighting environments. 3D Noise Reduction technology enables the camera to capture clear, polished video under low-light conditions. Latest in IR illumination The FE9391-EV's use of the latest in panomorph lens technology has led to much improved image quality with a huge drop in edge distortion. The FE9391-EV is also updated with the latest in IR illumination, VIVOTEK's Smart IR II technology with Adaptive IR. Adaptive IR enables the FE9391-EV's IR illuminators to adjust to the scene together or individually to provide the best possible IR image, reducing glaring hotspots and/or underexposed dark spots. Advanced Video Content Analysis The FE9391-EV is also be the first to include a new wave of advanced Video Content Analysis (VCA). Available in 4Q 2017, this includes better object detection in order to reduce false alarms. Through advanced Video Content Analysis functions including crowd detection features the FE9391-EV is the next steps in elevating surveillance cameras from image capturing devices to advanced notification instruments, allowing users to see more in smarter ways.
System OverviewThis PIR model is an indoor/outdoor dual detection camera which uses both video and infrared sensor to achieve accurate motion detection functionality. It also supports active deterrence feature which warns off intruders with white light and siren even before users are aware of the incident. This camera is an ideal choice for applications which require intrusion protect and video verification , such as courtyards, offices, warehouses, stores, etc. Functions 4 Signals over 1 Coaxial CableHDCVI technology supports 4 signals to be transmitted over 1 coaxial cable simultaneously, i.e. video, audio*, data and power. Dual-way data transmission allows the HDCVI camera to interact with the HCVR, such as sending control signal or triggering alarm. Moreover, HDCVI technology supports PoC for construction flexibility.* Audio input is available for some models of HDCVI cameras. Long Distance TransmissionHDCVI technology guarantees real-time transmission at long distance without any loss. It supports up to 700m transmission for 5MP HD video via coaxial cable, and up to 300m via UTP cable.**Actual results verified by real-scene testing in Dahua's test laboratory. SimplicityHDCVI technology inherits the born feature of simplicity from traditional analog surveillance system, making itself a best choice for investment protection. HDCVI system can seamlessly upgrade the traditional ana-log system without replacing existing coaxial cabling. The plug and play approach enables full HD video surveillance without the hassle of configuring a network. Dual DetectionThe detection accuracy is well guaranteed with both motion detection and PIR detection, which can eliminate the number of false alarms you receive. With the advantage of dual detection technology, your HDD will now last longer and not be recorded with false alarms. Gone are the days of alarms caused by heavy wind or rain. Instead, only true threats will instantly trigger an alarm and allow you to protect your loved ones. Active DeterrenceActive deterrence is to warn off intruders actively with white light and siren even before users are aware of the incidence. Once an intursion is detected, the white light will turn on and the siren will buzzer to alert the intruder. The white light can be set to Normally on or Flash, the content of siren is configurable. StarlightWith the adoption of large sized high performance sensor, the camera is able to provide incomparable performance even under extreme lowlight environment. The starlight feature allows more details to be captured and accurate color to be recognized at night or in scenes with limited illumination. Smart IRThe camera is designed with array LED IR illumination for best lowlight performance. Smart IR is a technology to ensure brightness uniformity in B/W image under low illumination. Dahua’s unique Smart IR adjusts to the intensity of camera's infrared LEDs to compensate for the distance of an object, and prevents IR LEDs from overexposing images as the object come closer to the camera. ProtectionThe camera's outstanding reliability is unsurpassed due to its rugged design.The camera is protected against water and dust with IP67, making it suitable for indoor or outdoor environments.With PIR working temperature range of -20 °C to +60 °C (-4 °F to +140 °F), the MotionEye is designed for extreme temperature environments. Supporting ±30% input voltage tolerance, this camera suits even the most unstable power supply conditions. Its 4KV lightning rating provides protection against the camera and its structure from the effects of lightning.
In Mirasys VMS Version 8 particular attention has been paid to security and privacy. Also, pre-existing familiar product features such as audit trail and versatile material management and search functionality brings significant benefits, for example, for the new EU General Data Protection Regulation (GDPR) requirements. Mirasys V8.4 is also a foundation for totally new opportunities related to this; what comes to system management and usage reporting, for example. Functional effectiveness Mirasys VMS is quick and easy to install, and especially effective in networked, IP-based CCTV systems and their operational and management needs, such as centralised management and upgrading/updating of servers, drivers and client applications without requiring on-site travel to remote locations. User profiles are easy to create and change. Servers can be pre-installed and pre-configured before delivering to the deployment location. The Mirasys VMS V8 modern Spotter for Windows user interface can be adapted to individual and specific needs and preferences and provides more visual space for videos without sacrificing any functionality. The new HTML5 (Hypertext Markup Language, Version 5) based user interface in V8.4 offers easy access to the Mirasys system from anywhere; PCs, tablets or smartphones. Integration with other systems Video management systems are also more and more frequently integrated with other systems such as building management or access control. Video feeds will in the future also often be a replacement for on-site visits or tours by personnel. This reduces operational costs for security and building maintenance. User interfaces Video surveillance camera features are consistently improving. Image quality can be exceptionally good compared to what it used to be only a few years ago. The newest cameras also require much less network bandwidth due to more effective encoding formats, such as H.265/HEVC (from 40% up to 60% of bandwidth and storage space savings, depending on the footage and device without any loss of quality, or increased quality at the same level with the H.264/AVC encoding) that many IP camera manufacturers have started to support. Individual servers can handle more simultaneously connected cameras than before, and the entire system no longer has an actual upper limit. Mirasys VMS V8 is the answer to the scalability and performance needs of new camera technologies from any manufacturer. Thus, the video management system can be designed freely using the best equipment for the customer-specific requirements, and can also support all future needs. User-specific requirements As video management evolves, traditional command and control (monitoring) services also change. In addition to security monitoring, this will also involve monitoring other systems (building management, access control, fire alarms, or even manufacturing, logistics and operational systems or processes). More and more often these are done by a service provider, and not the organisation whose premises, systems or processes are monitored and/or managed. Further, systems today have more and more different types of users; and variation in user skills or access rights can be significant. This leads to individual, user-specific requirements for system access and use, while simultaneously requiring that the users must be able to access the system from different locations and using different devices. Versatile possibilities and efficiency of management For systems integrations and management, Mirasys VMS Version 8.4 brings new and more versatile possibilities with its new HTTP based Application Programming Interface (API). A particularly significant benefit is that the HTTP API allows also for automation of the system configuration and management. The new HTTP API provides modern REST-compliant (Representational State Transfer, or ”RESTful”) web services which allow requesting systems to access and manipulate textual representations of web resources using a uniform and predefined set of stateless operations from any platform (almost any operating system and practically any programming language). Version 8.4 also brings a new software licensing model that brings remarkable simplification, effectiveness and cost savings, because from V8.4 onwards every server no longer requires its own server-specific software license, but all the software and licence features and limits (such as number of cameras, number of servers, number of simultaneously logged in users or any other functions) can, in any size system, be managed through a single system-wide software licence controlled via the system’s Management servers. The new V8.4 licences are also no longer dependent on the server’s MAC (Media Access Control) address, but uses a multi-factor “License Protection Key” that remains valid even if the hardware system has to be changed (e.g., new or replacement NIC, Network Interface Card, or new or replacement graphics controller, etc).
The Evolution Stainless Steel cameras, part of Oncam’s Specialist Camera Range, are unique to the 360-degree video surveillance market as they are the only ones certified for tough environments, indoor and outdoor. The 05MP and 12MP versions have been specifically designed to meet the needs of customers operating in demanding environments such as Food Processing, Industrial, Maritime and Ports and Safe City applications. The cameras’ resilient Stainless Steel 316 housing is manufactured for enhanced corrosion resistance. The IP66, IP67, IP68, IP69K, and NEMA 4X and 6P ratings make the enclosure fit for harsh environments, while its IK10+ rating makes it resistant to impacts of 40 joules. The NSF certification and HCV EU mark make the camera range unique, guaranteeing compliance with standards for commercial food equipment in both North America as well as Europe. The only 360-degree fisheye camera in a stainless steel housing, Oncam’s new and improved camera range is available for surface and pendant mount installations. A matching stainless steel arm allows for wall, corner and pole mounting. Evolution 05 Stainless Steel: EVO-05-SS2 Evolution 12 Stainless Steel: EVO-12-SS2
System OverviewDahua Technology, a world-leading video-centric smart IoT solution and service provider, debuted its new XVR series, XVR5000-I/XVR7000-4KL-I featuring full-channel SMD Plus to benefit customers from AI upgrade. The series are designated to reduce false-alarm rates and human surveillance costs, thus bringing great value to customers in search of products with accurate human/vehicle alarm to raise the security level of various indoor and outdoor facilities. Renovated from the original SMD technology running on CPU, the new SMD Plus adopts independent AI smart chip loaded with new deep-learning algorithm, enabling the computing power improved by 10 times. As a result, SMD Plus can recognise moving objects and differentiate human and vehicles, so as to effectively avoid false alarms caused by tree branches, insects, shadows, wind or other environmental factors. Meanwhile, users are allowed to select people or vehicles for playback, thus greatly saved target search time. Functions Perimeter ProtectionAutomatically filtering out false alarms caused by animals, rustling leaves, bright lights, etc. Enables system to act secondary recognition for the targets. Improving alarm accuracy. SMD PlusSMD Plus, referred to as Smart Motion Detection Plus, which is an upgrading version of SMD that greatly improves the alarm accuracy by loading deep-learning algorithm. It analyses person and vehicle shapes based on motion detection and send alarms only when person and vehicle intrudes. Smart H.265+Smart Codec, H.265+ can reduce up to 80% bit rate and storage requirements compared with H.264 without having to invest in new cameras. HDCVI/AHD/TVI/CVBS Auto-detectThe XVR can auto recognise the signal of front-camera without any setting. It makes operation more friendly and convenient. Coaxial Audio/Upgrade/AlarmThe integrated design can reduce wiring troubles which makes it much more cost-effective and convenient for installation. Long Distance TransmissionThe HDCVI system supports long distance transmission over coaxial cable and UTP, max. 700m for 4K/4MP, 800m for 1080P and 1200m for 720P. IoT FunctionalityHDCVI IoT can achieve multi-dimensional surveillance by integrating sensors with monitoring video, which not only can generate the report for analysis but also prevent risk in advance. POS FunctionalityThis funcion includes POS ticket information overlay and search which can be widely used in retail programs. Smart Fan DesignThe smart fan can automatically turn on or turn off according to the CPU temperature. This function can effectively reduce the fan noise to provide a better user experience. Spot OutputIt is made for a secondary monitor. This allows the operator to view one special monitor that assigned to selected cameras or video inputs from higher security areas. Smart SearchExtract and classify person and vehicles from massive video data, easy for end users to trace historical informaton and analyse. Person & Vehicle optional for playback to achieve quick target search, saving event retrieval tme.
Access control and video management are key security systems, and ACT365 creates a unified, integrated system, delivering a force that gives users far greater visibility and control of their assets. ACT365 is easy to install and use with an intuitive interface and can provide recurring revenue opportunities for the installer. From an end user point-of-view, system owners can play live video, replay recorded video based on access control events/alarms and is ideal for a customer with multiple sites who want a single interface. The ACT365 VCU (Video Control Unit) is a four-channel video control unit that connects with up to four cameras and streams video footage to the cloud. 1TB storage is sufficient storage for 21 days recording at standard resolution (720p). The VCU communicates to the ACT365 cloud service hosted in Microsoft Azure and is accessible from any modern web browser or Mobile App (iOS/Android). Below are a few choice examples of ACT365’s video power in action: Protecting students on campus: If an incident should arise in student accommodation, ACT365 links events at doors through video footage so campus security can quickly react. Live and recorded footage can be viewed remotely, and footage can be used in evidence. Combating break-ins: If there is somebody at a site entrance, persons can be verified, and doors then opened with the click of a button - all from a smartphone. For example, should an incident occur at a door and a business’ cash office is broken into. ACT365 allows you to simply click on the access control event “Door Forced” to locate and review recorded footage of the incident occurring whether you are in, or out of the office. Monitoring your business day-to-day: Another example of ACT365’s firepower can be seen at gyms or other types of membership clubs. For instance, if gym members are passing their access fobs to friends who are not members, with ACT365, you can quickly match up access control events with relevant camera footage and email the clips to those members who are allowing their fobs to be misused. Dealing with deliveries remotely: Ease of use and convenience are key ingredients to the product’s strength and depth in the field. It allows system users manage their systems remotely, including viewing live cameras. For example, dealing with early morning deliveries at a retail store is an ideal example of ACT365 in its prime. From the ACT365 app on their smartphone, the store manager can identify the courier through a live video feed and then remotely open the doors of the loading bay to allow the delivery to be made. The manager can monitor all of this remotely, and once the delivery is finished, they can close the loading bay door, and it will automatically rearm.
The Avigilon H4 Multisensor camera combines self-learning video analytics with exceptional coverage, featuring 3 or 4 individually-configurable sensors that can be positioned to monitor virtually any area. With 9-32 MP total resolution, it delivers broad coverage and high image detail, and uses H.265 compression technology to reduce bandwidth and storage requirements while maintaining clear images. Each camera sensor incorporates Avigilon self-learning video analytics and works with Avigilon Appearance Search™ technology, our award-winning AI video search engine.
Hikvision, the world’s leading supplier of innovative security products and solutions, has introduced new AcuSense network camera series to its EasyIP 4.0 security solutions. Featuring a strobe light and an audio alarm, the new cameras can immediately deter intruders from entering a prohibited site, further enhancing the safety of premises and property. At the core: faster, more accurate intrusion detection Importantly, Hikvision AcuSense network cameras build on the same cutting-edge intrusion detection functionality found within the existing Hikvision EasyIP 4.0 security solutions. When a potential threat is detected by the camera, it uses its intelligent false alarm reduction technology to disregard irrelevant movements, such as rain, leaves and animals. Instead, the camera focuses on human or vehicle movement, dramatically reducing the number of false alarms for faster, more accurate intrusion detection. An enhanced deterrent: strobe lighting and alarmOnce a potential intruder has been accurately detected, the AcuSense network camera triggers the built-in strobe light and audio alarm. This is designed to warn the intruder off before they attempt to breach the perimeter. The volume of the audio alarm and the brightness of the strobe light can be adjusted to suit the environment. Reliable operation, day or nightThe AcuSense network camera range can deliver this powerful intrusion detection and prevention at all times of day or night. Powered by Hikvision DarkFighter technology, all cameras in the range deliver superior surveillance images, even in ultra-low light. Four products to suit different applicationsThe new AcuSense network cameras are available in bullet and turret styles, and in 2MP or 4MP resolution, making a total of four different camera options available. Better service, greater peace of mindFrank Zhang, General Manager of International Product Marketing Department at Hikvision says, “AcuSense technology is already cutting-edge. By adding the strobe light and the alarm, we can now give our customers the chance to prevent incidents from happening in the first place, for even better security. We’re delighted to be able to help our customers protect their property in ever more valuable ways.” Product model detailsThere are four models available:• DS-2CD2346G1-I/SL: 4 MP IR Fixed Turret Network Camera• DS-2CD2326G1-I/SL: 2 MP IR Fixed Turret Network Camera• DS-2CD2T46G1-4I/SL: 4 MP IR Fixed Bullet Network Camera• DS-2CD2T26G1-4I/SL: 2 MP IR Fixed Bullet Network Camera
System OverviewThis PIR model is an indoor/outdoor dual detection camera which uses both video and infrared sensor to achieve accurate motion detection functionality. It also supports active deterrence feature which warns off intruders with white light and siren even before users are aware of the incident. This camera is an ideal choice for applications which require intrusion protect and video verification , such as courtyards, offices, warehouses, stores, etc. Functions 4 Signals over 1 Coaxial CableHDCVI technology supports 4 signals to be transmitted over 1 coaxial cable simultaneously, i.e. video, audio*, data and power. Dual-way data transmission allows the HDCVI camera to interact with the HCVR, such as sending control signal or triggering alarm. Moreover, HDCVI technology supports PoC for construction flexibility.* Audio input is available for some models of HDCVI cameras. Long Distance TransmissionHDCVI technology guarantees real-time transmission at long distance without any loss. It supports up to 700m transmission for 5MP HD video via coaxial cable, and up to 300m via UTP cable.**Actual results verified by real-scene testing in Dahua's test laboratory. SimplicityHDCVI technology inherits the born feature of simplicity from traditional analog surveillance system, making itself a best choice for investment protection. HDCVI system can seamlessly upgrade the traditional ana-log system without replacing existing coaxial cabling. The plug and play approach enables full HD video surveillance without the hassle of configuring a network. Dual DetectionThe detection accuracy is well guaranteed with both motion detection and PIR detection, which can eliminate the number of false alarms you receive. With the advantage of dual detection technology, your HDD will now last longer and not be recorded with false alarms. Gone are the days of alarms caused by heavy wind or rain. Instead, only true threats will instantly trigger an alarm and allow you to protect your loved ones. Active DeterrenceActive deterrence is to warn off intruders actively with white light and siren even before users are aware of the incidence. Once an intursion is detected, the white light will turn on and the siren will buzzer to alert the intruder. The white light can be set to Normally on or Flash, the content of siren is configurable. Smart IRThe camera is designed with array LED IR illumination for best lowlight performance. Smart IR is a technology to ensure brightness uniformity in B/W image under low illumination. Dahua’s unique Smart IR adjusts to the intensity of camera's infrared LEDs to compensate for the distance of an object, and prevents IR LEDs from overexposing images as the object come closer to the camera. Broadcast-quality AudioAudio information is used as supplementary evidence in video surveillance applications. The HDCVI camera supports audio signal transmission over coaxial cable. In addition, it adopts unique audio processing and transmission technology that best restores source audio and eliminates noise, guaranteeing the quality and effectiveness of collected audio information. ProtectionThe camera's outstanding reliability is unsurpassed due to its rugged design.The camera is protected against water and dust with IP67, making it suitable for indoor or outdoor environments.With PIR working temperature range of -10 °C to +50 °C (14 °F to +122 °F), the MotionEye is designed for extreme temperature environments.Supporting ±30% input voltage tolerance, this camera suits even the most unstable power supply conditions. Its 4KV lightning rating provides protection against the camera and its structure from the effects of lightning.
System Overview MXVR1004 is the new generation of mobile video recorder, it uses H.265 technology and the advantages are lowering the transmission bandwidth and saing the storage. It can support 1080P high-definition real-time recording, real-time vehicle location tracking and monitoring and the face detection. All the information such as GPS and video can be uploaded via wireless network: 3G/4G/WIFI. It has already passed EN50155/ISO16750 in order to meet the requirements of mobile use.This device can be used in kinds ofsolutions for different applications. Functions Anti-vibration- Using shock-absorbing material and structure, the new designed hard disk box can cope with varying degrees of vibration, keeping the system work normally all the time. Wide range of power supply- As the voltage output of vehicle battery changes during driving, the wide range of power supply can protect the device. 3G/4G/WIFI- Embedded with 3G/4G/WIFI module, the device can register into a public network to connect with VMS, and can send all theinformation(video/audio/alarm/gps) through wireless network. GPS- Embedded GPS module can receive location information and upload to VMS. Even when the device is offline, it can upload theinformation after it's online again and the vehicle can be tracked on the electric map of VMS. Multiple ports- With kinds of ports, like RS232, RS485, I/O, the video recorder can connect with various of accessories, such as card reader, fuelsensor, panic button and so on.system), so that the video, audio, alarm and location information can be uploaded to VMS.
Since 2011, the patented Dallmeier Panomera® multifocal sensor technology has provided comprehensive video protection for vast areas in many football stadiums, perimeters, airports and city areas all over the world. The new Panomera® series, the “Ultraline“, has exceptionally high effective resolution for these situations. Dallmeier presents the first model of the new series, the Panomera® S8 Ultraline, which delivers up to 190 megapixel at 30 fps. The Panomera® concept has revolutionised video technology: with up to eight sensors in a single camera, it is possible to capture enormous distances in unprecedented resolution quality. With fewer cameras and considerably less expense for both infrastructure and management, the total cost of ownership of video solutions are reduced significantly. At the same time, customer specifications regarding pixel density and coverage can be satisfied very precisely. Up to 26,000 sqm. coverage with one camera The first model of the new Ultraline series, the Ultraline S8, has an excellent dynamic range of 130 dB UWDR (effective) for an extreme Panomera® effect. This enables a resolution of 125 px/m up to a distance of 160, 104 or 82 m, enabling individuals to be recognised over the entire distance. Identification of persons (250 px/m) is supported up to a distance of 46 m depending on the model, observation (62 px/m) is possible even up to a distance of 322 m. This corresponds to a huge image space of more than 26,000 sqm. with continuous depth of field. Permanent capture The multifocal sensor system captures and stores all regions of the image space in the highest detail resolution. At the same time, it is not important whether the operators are concentrating on a specific region in live mode (multiple detail zoom) or if regions of interest are displayed in detail based on video content analysis (multiple auto-tracking). The Panomera® recordings always include the entire area of interest and allow every operation to be analysed. “Made in Germany” and GDPR-ready Like all Dallmeier cameras the new Panomera® model is manufactured entirely in Germany, at the Dallmeier factory in Regensburg. This in itself is a major factor in the manufacturer’s data protection and data security strategy, since it is then impossible for unauthorised persons to gain access through “backdoors”, for example. In all, 14 functions such as the setup of private zones, People Masking or the very latest encryption-authentication technology in the processing chain of Dallmeier solutions ensure that the strict requirements of the GDPR relating to data protection and data security are met.
Dahua Technology’s NVD0405DH-4K Ultra HD network video decoder has the following features: H.265/H.264/MPEG-4 video decoding 4ch@12Mp/4ch@4K/16ch@1080P/64ch@D1 decoding ability 1ch HDMI input, 4ch HDMI/VGA output, HDMI support Ultra HD 4K output Support up to 4 video-wall display units, support configuration of 1*1,2*1,2*2 Local GUI support mouse operation directlyAdd to Compare
1 channels, Data Input, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, 1 RJ-45 10 M / 100 Mbps adaptive Ethernet interface (PoE), 30 fps, PTZ, 80 x 39 x 90,Add to Compare
1 channels, Audio Input, Alarm Input, 1, H.264, TCP/IP, PPPOE,DDNS, FTP, IP Filter, DNS, SMTP, NTP, DHCP, RJ - 45 (10/100Base - T), 1920 × 1080, PTZ, 325 × 242 × 55, 2,500, 12 W, 12 V DC, - 10 ~+50 C (14 ~ 122 F), 10 ~ 90Add to Compare
2 channels, Audio Input, Alarm Input, 2, H.264/ JPEG, TCP/IP, PPPOE,DDNS, FTP, IP Filter, DNS, SMTP, NTP, DHCP, 10base-T Ethernet, RJ-45 , 1920 × 1080, PTZ, Linux, 325 x 242 x 55, 2,500, 12 W, 12 V DC, -10 ~ +50 C (14 ~ 122 F), 10 ~ 90Add to Compare
Audio Input, Alarm Input, H.264, TCP/IP, UDP, IPv4, IPv6; HTTP, RTP, RTSP, NFS, ISCSI, DHCP, NTP, SMTP, SNMPv1, SNMPv2c, SNMPv3, UPNP, SADP, PPPoE, DNS, FTP; IP Server, Dyndns, PeanutHull, HiDDNS, NO-IP; PSIA, HIKCGI, ONVIF., 1 10 M / 100 M /1000 Mbps Ethernet interface, 1920 x 1080, 60 fps, Linux, 200 x 123 x 39, 1,500, 13 W, 12 V DC, -10 ~ +55 C (14 ~ 131 F), 10 ~ 90Add to Compare
8 channels, Data Input, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, SADP(IP Finder),UDP, RTP and NTP, 10/100/1000 Mbps self-adaptive Ethernet interface, 1920 x 1080, 440 x 340 x 70, 5,200, 50 W, 100 ~ 240 V AC, -10 ~ +55 C (14 ~ 131 F), 10 ~ 90Add to Compare
1 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100Mbps adaptive Ethernet, 30 fps, 315 × 45 × 200,Add to Compare
4 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100Mbps adaptive Ethernet, 30 fps, 315 × 45 × 200,Add to Compare
8 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100M/1000Mbps adaptive Ethernet, 30 fps, 315 × 45 × 200,Add to Compare
16 channels, Audio Input, Alarm Input, H.264/ JPEG /M-JPEG/MPEG-4, IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SOCKSv4/v5, PSIA, OnVIF, Hik CGI, netFilter, RJ-45 10M/100M/1000Mbps adaptive Ethernet, 30 fps, 440 × 45 × 274,Add to Compare
Browse Video Servers (IP Transmission) / Video Encoders
Video server (IP transmission) products updated recently
For those of you old enough to remember, video matrix switchers were once the heyday of surveillance camera control. These cumbersome antiques were at the heart of every major video surveillance system (CCTV at the time) in premier gaming properties, government installations and corporate industrial complexes. They required more physical labour to construct and configure than perhaps the pyramids – maybe not – but you get the picture. And then digital video made its way in to the market and everything changed, transforming the physical demands for camera control and management from a hardware-centric to a software driven process. We’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely There’s no doubt that this migration also presented significant challenges as many security professionals often struggled with all things IT and software programming being one of the industry’s soft spots. Fortunately, we’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely. However, the complexities of today’s VMS functionality can be intimidating for anyone tasked with installing one of these systems given all of the user-defined options available from the simplest camera sequencing and bandwidth allocations to mobile management and enterprise level integration. This is where truly advanced VMS solutions need to shine on both the operations and the design/build sides of the equation. Smart VMS design There are more solutions products labelled “VMS solutions” out there than ever before. The issue is the fact that many of these “solutions” really don’t fall into the category of a true VMS by today’s standards but offer basic camera and NVR control. No doubt that there is a place for such software programs in the market. However, VMS solutions from the likes of OnSSI and other industry-leading companies offer distinct and superior management and control capabilities for demanding security and business intelligence applications. Perhaps of equal importance, these top-tier VMS solutions incorporate provisions for installers, so they have a clear and easier implementation path. OnSSI offers VMS solutions with smart camera drivers Here are seven attributes that can assist with the design and implementation of an advanced VMS solution: 1) Open architecture platform We need the ability to easily integrate with other systems and scale for future developments and physical system growth The ability to easily integrate with other systems and scale for future developments and physical system growth is largely dependent on a systems platform architecture. Here’s where VMS solutions with open architecture provide a distinct advantage. Open-architecture solutions expand functionality by facilitating greater integration between multiple systems and components. This not only makes VMS solutions with open architecture easier to implement, it makes them extremely cost-efficient by eliminating the need for proprietary solutions. Open architecture systems also provide adherence to industry standards such as ONVIF and PSIA, as well as compression formats such as H.265 and MJPEG, and help ensure system integration and support of an extensive range of manufacturers’ cameras and off-the-shelf hardware. Be wary of VMS solutions with limited camera manufacturer support. 2) Simple licensing processes and pricing Camera licenses and pricing is always a touchy subject, as any misunderstanding of a specific VMS solutions’ licensing terms can prove to be costly after the fact. And it often seems that some VMS suppliers have gone to great lengths to complicate the process as to obscure actual Total Cost of Ownership (TCO). Perhaps the most direct, simple and straightforward camera licensing and pricing method is to have one license per IP address used by each camera/encoder on multi-channel devices. These should be perpetual licenses with no required annual fees or subscriptions. Additionally, the licensing agreement should be all inclusive without added fees for multiple clients, failover servers, active directory support, I/O devices, redundant management servers, technical support or security patches and updates. 3) Mixing and matching camera license types The ability to mix and match different camera license types within the same system helps facilitate a seamless and simple migration of new and pre-existing systems with minimal downtime or interruption in operation. The ability to mix and match camera licenses not only saves valuable design and installation time, it can provide considerable savings when integrating large, multi-tenant systems. Mix and match capabilities also allow system designers to apply specific feature sets to specific groups of cameras to best leverage functionality and budgets, as well as providing the flexibility to implement an on-site, virtual, or cloud-based VMS solution, without any additional cost. 4) Auto camera detection and configuration Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements. This functionality allows installers to instantly locate cameras on the network and configure them centrally so they can easily replace older cameras while seamlessly retaining video recorded from them. The auto detection capability should also include the ability to detect and import CSV files, which can then be stored and used to configure camera templates for future camera installation profiles. 5) Smart camera driver technology VMS solutions with smart camera drivers offer valuable assistance during system implementation, and any time new cameras are added to the network or replace older models. Manufacturer-specific smart camera drivers expand the range of model-specific static drivers. Instead of storing the device’s information (codecs, resolutions, frame rates, etc.) statically, a VMS with smart camera drivers queries devices for their capabilities using the manufacturers’ proprietary protocol. All that is required for configuration is that the camera is available on the network. Smart camera drivers eliminate the need to wait for model-specific drivers or installation of driver packs, allowing for newly released cameras to be used immediately. Network security is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers 6) Importance of network security Network Security is perhaps the greatest challenge faced by industry professionals today Network security is perhaps the greatest challenge faced by industry professionals today. This is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers. New security developments to look for include TLS 1.2 encryption protocols for camera-to-server communications (SSL 3.0 supported for older cameras), as well as server-to-server communications. Additional safeguards to consider include: randomised video databases with no camera identification information to secure recorded data; support for Active Directory authentication; AES encryption between servers and clients; and AES encrypted exporting. 7) Automatic updates Regardless of the supplier you select for your VMS solution, they should be consistently providing new updates and security patches on a frequent if not regular basis. Keeping up with these updates can be a burden and are often overlooked leading to system failures and breeches. Advanced VMS solutions now feature automatic update service checks on a system-wide basis, eliminating the need to manually update individual servers and devices. This ensures that your VMS system always has the latest drivers, fixes and updates which assures overall security while reducing TCO. So next time you’re getting a demo of the latest and greatest VMS solution, remember to ask what it offers in terms of design and implementation tools. Half the battle with new technologies is getting them installed and working properly. Without the right tools to accomplish these critical first steps, all the functionality in the world will do you little good.
It amazes me how in a few short years security systems have gone from simple, dumb cameras witnessing events to intelligent eyes, ears, speech and touch solutions that boost situational awareness far beyond human capabilities. It seems the only senses missing from the equation now are smell and taste. And who knows, someone might be working on those in a lab somewhere right now. But what’s really fascinating to me is how the Internet of Things (IoT) has opened a world of possibilities for transforming security technology into something new yet again. With IoT we’re able to push and pull nuggets of intelligence from sources we never considered before: environmental sensors, pressure plates, door lock timers and much more. It’s helped us break through the constraining mindset that security systems are strictly single-purpose. With interconnectivity at the core, we’re starting to imagine myriad ways to apply these tools to challenges outside the realm of security. Here are just a few examples. Flood management assistance Network camera adds another dimension and timeliness to flood management by helping responders investigate remotely As recent hurricanes and floods have shown, water damage can be devastating to a community. That’s why some municipalities are using their city surveillance cameras in conjunction with water sensor to proactively address the problem. Water sensors collect data from multiple sources such as rain gutters, sewer systems and pump stations, in order to monitor fluctuations in water levels and water quality. If an alert triggers, having a network camera in proximity to visually verify the situation helps responders determine the best course of action. For instance, if multiple water detection sensors trigger alerts simultaneously or sequentially over a large area it’s probably due to natural runoff from recent rainfall. But without eyes on the scene, how can you be sure? Network camera adds another dimension and timeliness to flood management by helping responders investigate and identify the cause of a trigger remotely. It might be a fire hydrant spewing water, a water main break or even a chemical spill. With video streaming live to the command center, staff can remotely inspect the area, determine the cause of the trigger and decide whether remediation is required, thus avoiding the expense of dispatching an investigative crew to a non-event. Some municipalities are using their city surveillance cameras in conjunction with water sensor to proactively address the problem Environmental control assistance Data centers house the lifeblood of a business so it’s no wonder why companies work hard to protect them. We’re all familiar with the integration of network cameras with access control systems to visually verify who is actually using the credentials. Network camera adds another dimension and timeliness to flood management by helping responders investigate and identify the cause of a trigger remotely But there’s another aspect to protecting data centers and that’s environment control. Data centers need to maintain optimum humidity and temperature for the racks of electronics. When environmental sensors in the facility detect out-of-norm ranges technicians can remotely command a network camera to zoom in on the gauges and help them determine whether remediation might be necessary. Coupling network cameras with other sensors in the data center can provide visual confirmation of other conditions as well. For instance, every time a data rack door-open-close sensor detects an event it can trigger the camera to pan to the location and stream video to security. Some data centers employ weight sensors at the doorway to weigh personnel and equipment as they enter the room and when they exit to ensure no additional hardware is being taken out of the facility or left inside without permission. Any discrepancy would trigger the camera to zoom in for a close-up of the individual’s face and send a visual alert and ID information to security. Roadway management and parking assistance Network cameras have long played a part in city-wide traffic management. Adding video analytics and integration with network sensors, makes those cameras that much smarter and versatile. They can detect cars driving in bike lanes or driving in the wrong direction and capture license plates of offenders. Their ability to detect anomalous traffic flow patterns can be integrated with car counting sensors, networked electronic road signs and traffic light systems to automatically redirect vehicles to alternate routes. They make great, intelligent parking lot attendants, too. Working in conjunction with weight sensors network cameras can count vehicles coming into and leaving a lot or garage and verify when the facility has reached capacity. License plate recognition and video analytics can be used to ascertain that a vehicle entering a reserved parking space doesn’t match the credentials and vehicle attributes in the database. With the addition of noise sensors and audio analytics, network cameras can improve roadway and parking facility safety by detecting and identifying specific sounds – breaking glass, car alarms, gun shots, and aggressive speech – and triggering a visual alert to first responders. Network cameras can improve roadway and parking facility safety by detecting and identifying specific sounds and triggering a visual alert to first responders Shopper experience assistance In the early days of online shopping, e-tailers designed their sites to replicate the in-store customer experience. In an ironic turn of events, today brick-and-mortar stores are trying to mirror the online shopping experience. To do so, they’re turning their security systems into adjunct sales assistance. With network video and audio system automation they can recognise and acknowledge loyal customers with personal greetings. Retailers are applying people counting video analytics to checkout activity to create rules-based consistency in customer service With heatmapping analytics they can measure how much time a customer spends in a specific department or observe how they walk through the aisles of the store. They can track shopping behaviors such as items looked at that made it into the cart or didn’t, or whether a customer actually checked out or left the merchandise behind. By capturing these shopping patterns and trends retailers can shape a more positive, more profitable customer shopping experience. For instance, integrating video analytics with point of sale systems and RFID sensors on merchandise tags can result in timely alerts to sales associates to recommend additional merchandise. This is a case of emulating how e-tailers let the customer know that other customers who bought X often also purchased items Y and Z. Or to avoid disappointing customers due to stock outages, retailers are linking weight sensors and video analytics to make sure their shelves are well-stocked and if not, quickly alert associates to what items need to be restocked. Capturing business intelligence Retailers are also using video cameras to monitor checkout queues and trigger automated announcements over the public-address system, closed system such as smartphones or other wireless communications devices that checkers are needed rather wait for a person to call for backup. IoT laid the groundwork for network security solutions to seamlessly integrate with other IP-based technologies, sensors and programs They’re applying people counting video analytics to checkout activity to create rules-based consistency in customer service. While retailers will always use their surveillance camera for loss prevention, they’re finding that integrating traditional technology in new ways can yield even bigger returns. Linking network video surveillance, video analytics, network communications system and sensors with point-of-sale systems and customer loyalty databases, retailers are capturing the business intelligence they need to get back in the game and make brick-and-mortar a greater overall experience than online shopping. A natural cross-over technology This trend towards integration has forever changed how organisations view their investment in security technology. The intelligence and versatility of a tool that can see, verify and analyse what’s happening in real-time is spurring users to tap its cross-over potential for a host of other tasks that could benefit from more astute situational awareness – everything from manufacturing and equipment maintenance to logistics, inventory control and beyond. IoT laid the groundwork for network security solutions to seamlessly integrate with other IP-based technologies, sensors and programs. How we capitalise on that connection is only limited by our imagination.
Consolidation persisted in the physical security industry in 2018, and big companies such as Motorola, Canon and UTC continued to make moves. Also among the mergers and acquisitions (M&A) news in 2018 was a high-profile bankruptcy (that ended well), continuing consolidation in the integrator market, and the creation of a new entity called “LenelS2.” Here’s a look at the Top 10 M&A stories in 2018: 1. Motorola acquires Avigilon Motorola Solutions announced in February that it had entered into a definitive agreement to acquire video surveillance provider Avigilon in an all-cash transaction that enhances Motorola Solutions’ portfolio of mission-critical communications technologies. Avigilon products are used by a range of commercial and government customers including critical infrastructure, airports, government facilities, public venues, healthcare centers and retail. The company holds more than 750 U.S. and international patents. 2. UTC Climate, Control & Security buys S2 Security UTC Climate, Controls & Security agreed in September to acquire S2 Security, a developer of unified security and video management solutions. UTC subsequently combined S2 with its Lenel brand to create LenelS2, “a global leader in advanced access control systems and services” with “complementary strengths.” 3. Costar Technologies acquires Arecont Vision after bankruptcy Arecont Vision, the provider of IP-based megapixel camera and video surveillance solutions, announced in July that the acquisition by Costar Technologies, Inc. of its assets had been approved by the bankruptcy court. After the closing of the sale, the company began operating as Arecont Vision Costar, LLC and is part of Costar, a U.S. corporation that designs, develops, manufactures, and distributes a range of products for the video surveillance and machine vision markets. 4. Allegion acquires access control company ISONAS Allegion plc, a security products and solutions provider, agreed in June to acquire ISONAS through one of its subsidiaries. ISONAS’ edge-computing technology provides access control solutions for non-residential markets. ISONAS' devices – like its integrated reader-controllers – utilise power over ethernet, making them easy to install and cost effective as they utilise existing customer infrastructures. The company is based in Boulder, Colo. 5. HID buys Crossmatch for Biometrics HID Global announced that it had acquired Crossmatch, a provider of biometric identity management and secure authentication solutions, from Francisco Partners. Crossmatch’s portfolio of products includes biometric identity management hardware and software that complement HID’s broad portfolio of trusted identity products and services. 6. BriefCam announces acquisition by Canon BriefCam, a global provider of video synopsis and deep learning solutions, announced its acquisition in May by Canon Inc., a global digital imaging solutions company. The addition of BriefCam to Canon’s network video solutions products portfolio complements the Canon Group’s previous acquisitions of Axis Communications and Milestone Systems. 7. Allied Universal acquires U.S. Security Associates Allied Universal, a security and facility services company, finalised its acquisition of U.S. Security Associates (USSA) in October, further building on its position in the security services industry. This acquisition includes Andrews International (including its Government Services Division and Consulting and Investigations and International Division) and Staff Pro. 8. Johnson Controls acquires Smartvue Corp. Johnson Controls announced in April that it had acquired Smartvue, a global IoT and video provider that empowers cloud video surveillance and IoT video services. The addition of the Smartvue cloud-based video platform will enhance Johnson Controls’ offering of an end-to-end, smart cloud-based solution that can provide superior business data and intelligence to customers and added value to partners. 9. ADT acquires Red Hawk Fire & Security (and others) ADT Inc.’s acquisition of Red Hawk Fire & Security, Boca Raton, Fla., was the latest move in ADT Commercial’s strategy to buy up security integrator firms around the country and grow their footprint. In addition to the Red Hawk acquisition, announced in mid-October, ADT has acquired more than a half-dozen security system integration firms in the last year or so. 10. Convergint Technologies continues to acquire Convergint Technologies announced in August the acquisition of New Jersey-based Access Control Technologies (ACT), bringing further electronic security systems experience to Convergint's service capabilities. Convergint has strategically grown its service footprint across the United States, Canada, Europe and Asia Pacific through strong organic growth and the completion of 18 acquisitions since early 2016. And it continues: Convergint announced acquisition of SI Technologies, Albany, N.Y., in November and Firstline Security Integration (FSI), Anaheim, Calif., in December. (And Convergint itself was acquired in February by private equity group Ares Management.)
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
Five things to consider for AI with video technologyDownload
- Razberi Technologies' video surveillance appliances used to upgrade security at the City of Linden
- Rasilient completes Phase II of the video surveillance system upgrade at Fairbanks International Airport
- Panasonic’s facial recognition technology helps Jumbo Ten Brink Food win the safest store award in the Netherlands
- Hanwha Techwin's Wisenet cameras installed at Beykent University to support medical students' education