Ernitec CCTV Software(1)
With the introduction of a complete range of IP cameras, video encoders, NVR Servers, NVR-client, and switches Ernitec is now entering the IP-arena. The concept is build around Ernitec's EasyView™ software, which Ernitec has developed for control of their DVR-range and now also their IP products. The NVR servers are delivered with all software preinstalled, making them easy to install.The new IP camera range from Ernitec comprises day/night as well as colour cameras with or without PoE for simple and easy installation. Outdoor, vandal proof, fixed, varifocal domes and speed domes are also in the program.The NVR servers are available in two models, a very compact model for up to 8 cameras respectively 16 cameras and a larger model with the possibility of recording up to 32 cameras. If a large number of cameras are required, more NVR servers may be controlled from the same EasyView™ IP client. The concept is ideal for video surveillance of large shops, chain shops of any kind, schools, banks, post offices, hotels, gas stations etc. Through cooperation with a well-established PC supplier, Ernitec offers an attractive on-site NVR support concept.Add to Compare
Browse CCTV Software
CCTV software products updated recently
There’s almost no installation that goes 100-percent smoothly in the field of video surveillance. Unexpected issues routinely arise that can increase time on the job, cost of the project and frustration. Manufacturers work on the product side to help ensure their products are easy to install and – when troublesome situations do arise – are flexible enough for installers to quickly find a remedy. Importance of ease of installation Ease of installation is a very important part of the project to the system integrator because the cost of labour is variable Ease of installation is a very important part of the project to the system integrator because the cost of labour is variable and can be very expensive. In some cases, the cost of labour to install a camera can be more than the cost of the camera! If labour costs are high – or are more expensive than a system integrator planned – they can lose a great deal of money on a project. If a cautious system integrator includes too high of an estimate for labour in a project bid, his overall bid will to high and it could cost him the project. The easier the camera is to install, the lower the labour cost, subsequently achieving higher savings for end-users. Hence it is essential that camera manufacturers develop products that are easy to install or are flexible in the field for system integrators and installers who know that time is money. Enterprise projects can involve thousands of cameras installed Simplifying installation of cameras Camera installation typically involves an electrician, the camera installer and the person who configures the VMS (Video Management Software). Of course, one person can play all three roles, and in many cases, does, but enterprise projects can involve dozens, hundreds or even thousands of cameras with teams of individuals involved in an installation. The electrician runs conduit with an electrical or PoE (Power over Ethernet) connection to the housing or the backplate of the camera; the installer then installs the camera at that location, hooking it up to power; and then a configurator adds cameras to the network and makes adjustments – renaming the camera, setting the frame rate, enabling WDR (Wide Dynamic Range), and the like. When it’s a project that involves different players for any of these functions, there is the potential for a bottleneck and delay in project completion. And if a system integrator is paying an electrician, installer and software configurator – and they are all three on site waiting for each other to finish – that’s a system integrator’s worst-case scenario. Enhancement through modular cameras Video surveillance camera manufacturers like Hanwha Techwin are producing products that take different roles Video surveillance camera manufacturers like Hanwha Techwin are producing products that take the different roles of electrician, installer and configurator into consideration, allowing them to complete their tasks independently. With a focus on modular design which includes a USB dongle, a device manager, magnetic module and included accessories, the Wisenet X series Plus is one of the fastest cameras to install, service and upgrade – saving installers time and money. Wisenet X series Plus cameras have a detachable camera module that utilise magnets to lock into the housing for instant configuration. Electricians can run conduit with a single PoE connection to the back plate/housing while the configurator is working on configuring the camera module, allowing security professionals to later snap the camera into place in just minutes. The VMS configurator can then come and add the cameras to the network and program their functionality. Modular cameras offer flexibility In the past, an end user might determine after the camera is installed that there aren’t enough pixels on target, or they need certain different functions like video analytics for example, resulting in the time-consuming replacement of the entire camera. With modular-designed cameras, the camera module can be swapped with a new one without having to focus or replace the camera – even to change the resolution or field of view, also Wisenet X series Plus has optional PTRZ modules that can be remotely adjusted to the field of view and the position of the camera lens. Making camera adjustments in the field is also now easier and perhaps even safer. Installers have been known to climb a ladder and juggle a bulky laptop to access the network to be able to see video of how the camera is positioned. Or they’ve had to use analogue video output to view the video feed on a separate monitor which provides the field of view, but not megapixel quality. Using a smartphone, the installer can wirelessly see full and not cropped quality video directly from the camera Wisenet X series Plus cameras have a USB port that allows installers to connect it to a small dongle that converts the camera to a Wi-Fi device. Using a smartphone, the installer can wirelessly see full and not cropped quality video directly from the camera. It’s a much easier way to evaluate video while at the camera. Eliminating the second person looking at live view on a computer guiding through a cellphone to the installer to accurately point the camera to the proper position. If system integrators can do some of the legwork prior to even getting on site, it can reduce cost and improve efficiency. Imagine having 300 cameras ready to send to a project site. To configure those cameras, a system integrator has to take each camera out of the box, plug each into a switch, configure it, take it off of the switch and put it back in the box. To improve this process, camera manufacturers have now developed packaging that provides access to the camera port without even having to remove it from the box. It’s an innovative solution that saves time. Modular cameras have optional PTRZ modules that can be remotely adjusted to the field of view Software programs help in enhancing installation Whether it’s a one-man show or a team of electricians, installers and configurators, software programs can greatly enhance the installation process. Device managers are important tools in adding multiple cameras to a project. Using that 300-camera project, for example, it’s easier when a manufacturer has a device manager that allows the mass programming and configuration of cameras. Adding 300 cameras one by one is time consuming and leaves room for error when making so many multiple entries. A device manager should be able to scan the network and locate its devices, allowing them to be grouped, configured and much more. Every video surveillance camera project is going to have its ups and downs. But camera manufacturers can do their part in the production process to address the many issues known to slow down progress. It’s impressive that many are taking the lead in producing innovations like modular camera design, flexibility in the field and accessible packaging that can truly reduce installation cost and improve efficiency.
For those of you old enough to remember, video matrix switchers were once the heyday of surveillance camera control. These cumbersome antiques were at the heart of every major video surveillance system (CCTV at the time) in premier gaming properties, government installations and corporate industrial complexes. They required more physical labour to construct and configure than perhaps the pyramids – maybe not – but you get the picture. And then digital video made its way in to the market and everything changed, transforming the physical demands for camera control and management from a hardware-centric to a software driven process. We’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely There’s no doubt that this migration also presented significant challenges as many security professionals often struggled with all things IT and software programming being one of the industry’s soft spots. Fortunately, we’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely. However, the complexities of today’s VMS functionality can be intimidating for anyone tasked with installing one of these systems given all of the user-defined options available from the simplest camera sequencing and bandwidth allocations to mobile management and enterprise level integration. This is where truly advanced VMS solutions need to shine on both the operations and the design/build sides of the equation. Smart VMS design There are more solutions products labelled “VMS solutions” out there than ever before. The issue is the fact that many of these “solutions” really don’t fall into the category of a true VMS by today’s standards but offer basic camera and NVR control. No doubt that there is a place for such software programs in the market. However, VMS solutions from the likes of OnSSI and other industry-leading companies offer distinct and superior management and control capabilities for demanding security and business intelligence applications. Perhaps of equal importance, these top-tier VMS solutions incorporate provisions for installers, so they have a clear and easier implementation path. OnSSI offers VMS solutions with smart camera drivers Here are seven attributes that can assist with the design and implementation of an advanced VMS solution: 1) Open architecture platform We need the ability to easily integrate with other systems and scale for future developments and physical system growth The ability to easily integrate with other systems and scale for future developments and physical system growth is largely dependent on a systems platform architecture. Here’s where VMS solutions with open architecture provide a distinct advantage. Open-architecture solutions expand functionality by facilitating greater integration between multiple systems and components. This not only makes VMS solutions with open architecture easier to implement, it makes them extremely cost-efficient by eliminating the need for proprietary solutions. Open architecture systems also provide adherence to industry standards such as ONVIF and PSIA, as well as compression formats such as H.265 and MJPEG, and help ensure system integration and support of an extensive range of manufacturers’ cameras and off-the-shelf hardware. Be wary of VMS solutions with limited camera manufacturer support. 2) Simple licensing processes and pricing Camera licenses and pricing is always a touchy subject, as any misunderstanding of a specific VMS solutions’ licensing terms can prove to be costly after the fact. And it often seems that some VMS suppliers have gone to great lengths to complicate the process as to obscure actual Total Cost of Ownership (TCO). Perhaps the most direct, simple and straightforward camera licensing and pricing method is to have one license per IP address used by each camera/encoder on multi-channel devices. These should be perpetual licenses with no required annual fees or subscriptions. Additionally, the licensing agreement should be all inclusive without added fees for multiple clients, failover servers, active directory support, I/O devices, redundant management servers, technical support or security patches and updates. 3) Mixing and matching camera license types The ability to mix and match different camera license types within the same system helps facilitate a seamless and simple migration of new and pre-existing systems with minimal downtime or interruption in operation. The ability to mix and match camera licenses not only saves valuable design and installation time, it can provide considerable savings when integrating large, multi-tenant systems. Mix and match capabilities also allow system designers to apply specific feature sets to specific groups of cameras to best leverage functionality and budgets, as well as providing the flexibility to implement an on-site, virtual, or cloud-based VMS solution, without any additional cost. 4) Auto camera detection and configuration Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements. This functionality allows installers to instantly locate cameras on the network and configure them centrally so they can easily replace older cameras while seamlessly retaining video recorded from them. The auto detection capability should also include the ability to detect and import CSV files, which can then be stored and used to configure camera templates for future camera installation profiles. 5) Smart camera driver technology VMS solutions with smart camera drivers offer valuable assistance during system implementation, and any time new cameras are added to the network or replace older models. Manufacturer-specific smart camera drivers expand the range of model-specific static drivers. Instead of storing the device’s information (codecs, resolutions, frame rates, etc.) statically, a VMS with smart camera drivers queries devices for their capabilities using the manufacturers’ proprietary protocol. All that is required for configuration is that the camera is available on the network. Smart camera drivers eliminate the need to wait for model-specific drivers or installation of driver packs, allowing for newly released cameras to be used immediately. Network security is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers 6) Importance of network security Network Security is perhaps the greatest challenge faced by industry professionals today Network security is perhaps the greatest challenge faced by industry professionals today. This is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers. New security developments to look for include TLS 1.2 encryption protocols for camera-to-server communications (SSL 3.0 supported for older cameras), as well as server-to-server communications. Additional safeguards to consider include: randomised video databases with no camera identification information to secure recorded data; support for Active Directory authentication; AES encryption between servers and clients; and AES encrypted exporting. 7) Automatic updates Regardless of the supplier you select for your VMS solution, they should be consistently providing new updates and security patches on a frequent if not regular basis. Keeping up with these updates can be a burden and are often overlooked leading to system failures and breeches. Advanced VMS solutions now feature automatic update service checks on a system-wide basis, eliminating the need to manually update individual servers and devices. This ensures that your VMS system always has the latest drivers, fixes and updates which assures overall security while reducing TCO. So next time you’re getting a demo of the latest and greatest VMS solution, remember to ask what it offers in terms of design and implementation tools. Half the battle with new technologies is getting them installed and working properly. Without the right tools to accomplish these critical first steps, all the functionality in the world will do you little good.
According to the reports of not-for-profit organisation Gun Violence Archive, the year 2018 has seen 323 mass shooting incidents as of November 28 in the United States. This number is 346 for the year 2017 and 382 for 2016 (more statistics are available here), with “mass shooting” defined as cases where four or more people are shot or killed in the same time period and location. While definitions of mass shooting vary with organisations in the US, the count of over 300 incidents per year, or about once per day on average, is simply alarming. It raises public safety concerns, ignites debates and protests, which in turn lead to public unrest and potentially more violence, and increases costs for governments from the regional to federal level. Most importantly, the loss of lives demands not only improvement in post-incident handling and investigation, but also new prevention technologies. Gunshot detection solutions AI weapon detection offers a more efficient alternative to prevent active shooting There are several gunshot detection solutions in the security market, commonly used by law enforcement agencies to detect and locate gun fires. These systems function based on acoustic recordings and analyses and often in combination with signals detected by sensors of the optical flash and shockwave when a gun is fired. However, gunshot detection by nature dictates that the law enforcement can only react to a shooting incident that has occurred. With fast action, law enforcement can prevent the incident from escalating, but lives that are lost cannot be recovered. With the development of artificial intelligence in object recognition, AI weapon detection offers a more efficient alternative to prevent active shooting: AI can visually detect guns based on their shapes before they are fired. The AI is trained to recognise firearms in different shapes, sizes, colours, and at different angles in videos, so that the AI weapon detector can be deployed with existing cameras systems, analyse the video feeds, and instantly notify security staff when a gun is spotted. Comparison of the advantages for law enforcement and public security agencies Legacy gunshot detection using sensors AI weapon detection Reactive measure: detect after guns have been fired Proactive measure: detect before guns are fired Time to action: within 1 second Time to action: within 1 second Unable to provide visual data about shooter(s) Can provide data about shooter(s) based on the camera recording: clothing, luggage (backpack, handbag, etc.), facial features, vehicle Unable to track the location of the shooter(s) before and after shooting because of the lack of sound Can track the shooter(s) using AI Person & Vehicle Tracking, AI Face Recognition, and AI License Plate Recognition False detection caused by similar sound such as fireworks and cars backfiring Minimal to no false detection, as AI can distinguish different types of handguns and rifles from normal objects (umbrella, cellphone, etc.) Require physical deployment of gunshot detection sensors Can be used with existing camera systems, do not require special hardware Complicated to deploy, require highly trained professional Easy to deploy as an add-on to existing video surveillance system - Can integrate with gun-shot detection to create a “double knock” audio and video active shooter alert system Gun-shot detection advantages In addition to advantages for law enforcement and public security agencies, this type of visual-based pre-incident detector has three-fold advantages for the public: Save lives by spotting the shooter before the shooting event. Minimise the chaos entailing an incident: panic and chaos caused by a shooting incident often adds to injury, as people run, fall, trample on others… With an AI weapon detector, when a gun is spotted, the system sends an alert to security staff, who can quickly control the situation in an organised manner and apprehend the intending shooter. Can be added as a SaaS (Security as a Service) component to small business and home surveillance systems, e.g., intrusion detection alerts (home invasion incidents with firearms number over 2500 per year nationwide). For a complete active shooter detection system, video-based AI detector can operate in conjunction with gunshot detectors for enhanced security. Traditional X-ray based weapon detection or metal detection entrance systems are complicated and expensive; with AI video technology, active shooter detection system can be cost-effective, and after all, what price tag can one put on a life? Written by Paul Sun and Mai Truong, IronYun
GJD will also exhibit Clarius LED illuminators designed to work with CCTV cameras and safety-critical applications GJD, an award winning British manufacturer of intruder detection products and security lighting solutions for the CCTV and security sectors has recently announced its attendance at the Rochdale online business exhibition. The event will take place at Rochdale Town Hall from 4pm until 7pm on the 23rd of September. Meeting point for business owners and general public Neil Hennessy, GJD’s Technical Sales Manager will be on hand to discuss the versatile benefits of the company’s detectors and illuminators. Hennessy commented: “The Rochdale Online annual business event is a fantastic opportunity to meet local businesses owners and the general public from across Rochdale, Heywood and Middleton”. GJD will be showcasing market leading perimeter surveillance technologies including the company’s external D-TECT range of wired and wireless detectors. Offering the very latest quad and dual PIR technology, advanced IP solutions and anti-masking detectors, the D-TECT range can be relied upon for the most demanding security situations. Integration with leading VMS providers Latest additions to the D-TECT range include 4 new IP detectors, which offer seamless integration with major VMS providers and CCTV systems. Bosch VMS, Milestone Xprotect, Mirasys, SeeTec Enterprise and Probox are to name a few of the supported VMS software providers. Supported cameras for direct control include Axis, Bosch, Ernitec, Hikvision and Sony. Others will soon be added. Other state-of-the-art products being showcased include the company’s Clarius® LED illuminators. Available in Infra-Red and White-Light, Clarius® units are specifically designed to work in conjunction with CCTV cameras and safety-critical applications to significantly enhance image quality.
The external perimeter protection industry is continuously evolving to meet dynamic security requirements. GJD, a world leading British security manufacturer of external detector equipment and LED illuminators has quickly adapted to the digital era by creating advanced IP and digital solutions. Suitable for big and small security projects GJD has recently announced its D-TECT IP range, being suitable for both big and small security projects. The advanced intruder sensing technology includes PIR, microwave and anti-masking. Such reliable sensors coupled with IP connectivity makes GJD’s IP range of detectors well suited for intruder monitoring, CCTV surveillance and other alarm warning requirements. Key benefits include increased detector alignment and set up options, genuine alarm capture and exceptional resistance to false or ‘nuisance’ alarms. Another major benefit is remote diagnostic control of the perimeter boundary detection systems. Mark Tibbenham, GJD’s Managing Director commented: “Our new D-TECT IP detectors provide real-time remote access to enable remote monitoring and programming from anywhere and at any time”. Integrates with third party VMS providers The D-TECT IP range integrates with third party VMS providers and CCTV systems. Bosch VMS, Milestone Xprotect, Mirasys, SeeTec Enterprise and Probox are to name a few of the supported VMS software providers. Supported cameras for direct control include Axis, Bosch, Ernitec, Hikvision and Sony. Others will soon be added. All of the IP detectors use Power over Ethernet connectivity providing powerful security solutions, which enable cameras to be instantly directed to the location of intrusion; whilst security personnel are alerted with detailed alarm information. Also offering flexible monitoring, the detectors can be adjusted to suit different customer requirements including adjustable field of view, which helps avoid boundary overspill, saving both energy and costs.
EET Group will now be able to provide Milestone's IP video surveillance software in more countries in Europe Milestone Systems, the open platform company in IP video management software (VMS), and IT distributor EET Group have signed a distribution agreement to provide Milestone XProtect IP video offerings in 16 European countries. EET is already established as a successful distributor of Milestone IP video surveillance software in the Nordics, and with the new agreement the two companies now expand the partnership to cover many more countries in Europe. "Based on our many years of successful collaboration with EET in the Nordic market, it was a natural next step for EET and Milestone to take this proven template to other European markets. EET’s expertise in the IP video surveillance field and harnessing the many advantages of the Milestone open platform will help fuel the rapid growth of transition from analog to IP-based solutions in these regions," says Lawrence de Guzman, Director of Sales Operations at Milestone Systems. The agreement ensures that EET’s dealers in Europe can offer Milestone IP video surveillance software to support the strong, high-end camera brands EET carries, such as Axis, IQinVision, Sony, Pelco, Mobotix, and Ernitec. The distribution includes the following markets: Denmark, Norway, Sweden, Finland, the Netherlands, Germany, France, Italy, Spain, Portugal, Poland, Switzerland, England, Belgium, Austria and Czech Republic. "Our ambition is to become the largest distributor of IP video surveillance in Europe, so I am very excited that we can now support our dealers in Europe with Milestone’s market leading software," says Michael Kragh, Director of Security and Video Surveillance at EET. "Milestone is one of the most well-reputed companies in the industry and our dealers have directly requested that we start selling Milestone open platform software in the rest of Europe. We want to work with the industry’s top manufacturers. Milestone solutions span a full spectrum of needs, and we see a big market for additional products to integrate, such as license plate recognition and Point-of-Sale to prevent loss in retail businesses." Video surveillance accounts for 24 million Euro of EET Group’s annual revenue. Within the next three years EET expects its video surveillance income to reach almost 53 million Euro, with particularly high expectations for strong business in England, Germany and Switzerland.
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
Five things to consider for AI with video technologyDownload
Senstar Symphony VMS and video analytics solution ensures enhanced security of Ferretería Ochoa retail chain
- Senstar Symphony VMS and video analytics solution ensures enhanced security of Ferretería Ochoa retail chain
- Kutch manufacturing firm eliminates data spoofing with Matrix Weighbridge integration solution
- Maxxess eFusion technology ensures enhanced security and safety at some of Dubai’s elite 5-star hotels
- Razberi Technologies' video surveillance appliances used to upgrade security at the City of Linden