Hitachi CCTV Monitors(2)
CCTV monitor products updated recently
It had been a particularly slow night. The plant security guard had just made his rounds on this Sunday evening shift. As soon as he passed the weighing scales, he could enter the guard shack and get off his feet. Challenging a curious incident However, on this night, he noticed the waste vendor’s truck sitting half on and half off the scale. He stopped dead in his tracks to see if the truck would back up and completely sit on the scale. It never did. The observant guard walked up to the truck and challenged the driver who seemed surprised. “Hey, you’re not weighing your truck properly.” The driver fumbled for a response before replying, “Sorry, I was on the phone with a friend. I didn’t notice it.” But this security guard had the presence of mind to demand the driver’s phone. The driver was caught off guard and surrendered the phone. The guard then pulled up the most recent incoming/outgoing calls and saw no calls during the last 30 minutes. “I don’t think so.” “You don’t think so what?” The security guard was frank, “You haven’t used this phone in over half an hour.” The truck driver sheepishly acknowledged the fact. It was decided to install CCTV covering the weighing area and scales – no easy feat due to poor lighting Preventing crime as it happens Knowing the driver was lying, the security guard ordered the truck back on the scale for a correct weighing and advised the driver that he would report the incident. The security guard wrote up his report and handed it off to his supervisor who, in turn, contacted the local corporate investigator. This investigator was soon on the phone with his boss at corporate headquarters on the other side of the world. Together with Security, they decided to install CCTV covering the weighing area and scales – no easy feat due to poor lighting. However, once completed, they waited. They would not have to wait long. For the next two months, the waste vendor trucks, filled to the brim with production waste, black-and-white paper and other waste products from the plant, would stop on the scale only for a moment and then drive the front half of the truck off the scale for weighing. It was obvious that the vendor was cheating the company by only paying for half the waste. After two months, it was decided to catch the next cheating driver “en flagrante.” Sure enough, the next truck went half on and half off the scale and was weighed. Security then asked the unsuspecting driver to park his truck and invited him inside the building to talk to a supervisor. The driver signed an incriminating statement about the scheme and his role therein. They sent him on his way asking him to keep it quiet Waiting for the driver in a large office was the local investigator and his close friend, the Head of Security. After a difficult interview, the driver admitted to cheating on the scales over a two-year period—he claimed that some of the scale cheating was done at the direction of the vendor’s management, while some of it he did himself by “ripping off” the vendor—which he acknowledged was dangerous. Working with authorities The driver signed an incriminating statement about the scheme and his role therein. They sent him on his way asking him to keep it quiet—they would see what they could do for him later on. In the meantime, Corporate Investigations had received a due diligence report on the vendor company which contained disturbing news—the company and its managers were associated with a countrywide waste management mafia. The report suggested that the vendor had a reputation for thefts and involvement in numerous lawsuits regarding thefts and embezzlement. Shockingly, no prior due diligence had ever been conducted on the vendor. Fortunately, the plant’s finance and audit team had maintained good records over the past 5 years and were able to re-construct the amount of waste going out the plant door and the amounts being claimed and paid for by the vendor. The discrepancy and loss stood at a multi-million dollar figure. After consulting with the local police authorities and company lawyers, it was decided to pursue a civil case against the vendor. Pursuing legal action The regional lawyer, the Head of Investigations, the Head of Security and the CFO invited the vendor to discuss the problem. Some of the evidence was shown to the vendor’s CEO who became indignant and, in order to save face, promised to fire the truck drivers and to repay any losses for the last two months. Inter-dependent entities - security, investigations, finance/audit and legal - combined their resources and agendas to form a unified front That was not enough for the company and a protracted legal battle ensued which lasted several years and resulted in the vendor’s paying almost the entire amount in instalments. The vendor was dropped from the contract and internal controls strengthened—the only plant employee dealing with the waste issue left the company and was replaced by two individuals. The plant also began paying more attention to the waste process and less to the production side. Several “lessons learned” come to mind. First, the tripwire came in the person of an astute and well-trained security guard who exhibited some of the best characteristics you want to see from men and women in that profession. The Security Department was also adept at installing the CCTV and capturing the fraud live on videotape. But a far greater lesson was learned—of what can happen when inter-dependent entities (security, investigations, finance/audit and legal) within a company combine their resources and agendas to form a unified front. The results speak for themselves.
Despite the huge amount of video data collected, statistics show that only 10 percent of data is ever used and most loses its value within seconds of being generated. Why use such a limited amount of data? Many security organisations are focused on delivering the right information in case of an emergency or providing the correct evidence after a criminal act. Yet the fact is, a new video security system can be a large investment. Together with the service, maintenance and management costs associated with it, most video systems are currently considered overhead. So how can you maximise the value of your video system? Video analytics ensure surveillance images are continuously analysed in real-time to alert users to things that need attention. This helps organisations make sense of video data and adds an extra layer of protection by providing alerts to potential security risks before or as they occur, such as detecting loitering in a parking lot or a perimeter breach after hours.Integrating analytic alerts with other security systems enables organisations to use the data to trigger responses from other components of the security solution Video analytics can be programmed to alert on things such as line/perimeter crossing, illegal parking, loitering: people counting, speeding in areas like parking lots, colour matching alerts. These are just some of the ways video analytics can assist to enhance security and safety. Video analytics trigger system events Integrating analytic alerts with other security systems enables organisations to use the data to trigger responses from other components of the security solution. This can increase overall security, better mitigate risk, and reduce complexity for users to improve efficiency. For example, intelligent cameras equipped with video analytics can initiate intrusion detection system events when alarms are triggered. The analytic alert can immediately fault a corresponding point on the panel. This can prompt the panel to communicate the alarm to the central station or to send video snapshots to security personnel. In a retail store or warehouse environment, video analytics can also alert to an emergency exit that has been blocked by a pallet of boxes or by another object. Using an idle object rule, the IP camera with analytics can alert when an object remains in the area for longer than a pre-defined amount of time. People counting and crowd detection can also help organisations improve customer satisfaction by monitoring for long lines or people gathered in an area When this occurs, the alert can fault a point on the intrusion control panel, which can then send an email or text message with a video snapshot to the store or warehouse manager. This can help to prevent code violations and unsafe conditions. Extending beyond security Not only can video analytics detect threats, alert to security breaches, and help enforce health and safety regulations, it can also do much more. It can enable organisations to re-purpose the data for new uses for the business—offering valuable insights to other departments within an organisation, such as providing the ability to analyse behaviour in retail stores to help merchandisers create more effective display placements. How is this possible? Analytics can provide organisations with the additional information about video data that they need to re-purpose it for a business advantage. The cameras can interpret data directly at the source and re-assign it to help organisations make smarter decisions.By providing business information that goes beyond conventional security applications, new functionality can easily be added to a video security system This includes monitoring presence to reduce utility bills, identifying patterns in customer activity to improve sales, and distinguishing road blocks to optimise retail shop layout and increase customer satisfaction. Improving customer satisfaction People counting and crowd detection can also help organisations improve customer satisfaction by monitoring for long lines or people gathered in an area, indicating additional assistance may be needed. By providing business information that goes beyond conventional security applications, new functionality can easily be added to a video security system. In this way, video analytics can help organisations reduce costs, increase efficiency, and improve sales. The organisation gains greater value from the system and a return on investment that can be measured in tangible business results. Then, the video system is no longer considered overhead. Overall, using video analytics as part of an integrated security system and fully using the data gained from the analytics can help you better meet your organisation’s needs for security and extend surveillance data to deliver additional business benefits. I believe that every business should be able to take advantages of these advances in technology - without the need for additional investment or a license fee. Every business is different, and new analytics solutions should be adaptaple to meet your exact needs. Thinking beyond security opens up video analytics to revolutionise how video data will be used in the future and can take data usage to a whole new level.
End users can add security, safety and business intelligence – while achieving a higher return on investment at their protected facilities – with live streaming video. It can be deployed effectively for IP video, network video recorders (NVRs) and body-worn cameras. The growing use of streaming video is resulting in vast technological developments and high-end software that promotes reduced bandwidth, high scalability and lower total cost of ownership (TCO). Here’s how users can add value to security with live streaming video and what they should look for in the procurement of technology solutions. Questions are answered by Bryan Meissner, Chief Technology Officer and Co-Founder of EvoStream. Q: What is live streaming video and how does it apply to physical security? BM: In its simplest and most popular form, video streaming allows users to watch video on PCs, laptops, tablets and smartphones. According to GO-Globe, every 60 seconds more than 400 hours of video are uploaded and around 700,000 hours watched. The key to effective video streaming is for the platform to be able to adapt to the limits of the internet or network connection so the viewer gets an unbridled experience without buffering or signal loss. Live video streaming in security applications leverages a variety of connected devices, appliances and services including the cloud, mobile platforms, IP cameras and NVRs, becoming an enabling technology for more effective, real-time data capture at the protected premises. It reduces bandwidth costs and infrastructure operating requirements by streaming directly from cameras, mobile devices, drones, body worn units and loT devices to browsers, phones and tablets. The best solutions optimise the experience for the user and permit image capture and retrieval from Android, iOS, browser platforms or directly from cameras or NVRs—streaming to wherever the user desires. Quality live streaming applications provide clear, real-time images and retrieve high-resolution video that can be used for evidence, identification, operations management or compliance regulation and control. The most cost-effective solutions offer minimal hardware requirements, lower overall operating expenses and promote high scalability – even integration with many legacy security management platforms. Q: What are some challenges of live streaming video and how are those being addressed by new technology? BM: Live streaming video can present challenges when a solution isn’t designed specifically for the security infrastructure. End users need to look for forward-thinking software and firmware solutions which offer reduced bandwidth requirements, high scalability and a lower total cost of ownership (TCO) or they will be disappointed with the results and costs of maintaining services for end users. The technology is changing rapidly, so only providers who focus on innovation can keep pace and future-proof the user and their facility. To be most effective, video needs to be able to stream consistently and reliably to and from a host of different devices, platforms, browsers and mediums, on-premises servers or the cloud. Video footage needs to be obtained quickly and deliver critical metadata, with built-in cyber safeguards and hardening such as automatic encryption and authentication. The most competent live video streaming lets users integrate with and run on any platform, appliance or device Q: What do end users need to look for in solutions for effective video streaming? BM: Implementing a live streaming video platform should result in greater efficiency and reduced operational costs. Live video streaming to and from a variety of connected devices, appliances and services requires sub-second latency from image capture to delivery. It also needs to be as open and agnostic as possible – spanning multiple technologies, standards and protocols and giving the user enhanced flexibility for their specification. The most competent live video streaming lets users integrate with and run on any platform, appliance or device including standalone servers, server racks, public, private and hybrid clouds and other distribution channels using the same application programming interface or API. Streaming should also support the latest codecs, such as H.264 and H.265 along with widely specified protocols for the distribution of that video. Q: What are some of the trending technological developments in live streaming video applications? BM: Traditional video streaming consumes exorbitant amounts of bandwidth and users pay for video routed through their servers. Some of the latest capabilities, such as peer-to-peer streaming, HTML5 media players, metadata integration and cost-effective transcoding via RaspberryPi enhance overall processing and ultimately strengthen the user experience. Peer-to-peer is a critical, emerging component in effective video streaming. With peer to peer, video does not go through servers but instead streams directly between the camera and the end-user’s phone, for example, eliminating that cost of bandwidth from the platform while still permitting exact control of content. Users stream live from cameras to any device, with the ability to authenticate and approve peering from the back-end infrastructure while enabling low-latency HTML5 without incurring excessive platform bandwidth costs. The explosion of live streaming video in IP video cameras, NVRs and body-worn cameras is driving a new category of high-end software offering reduced bandwidth, high scalability and lower TCO. It prepares users for new technology and the loT, eliminating the largest cost driver of hosted live streaming platforms – bandwidth. Applications that offer peer-to-peer streaming and other feature sets can help future proof the end-user’s investment and strengthen the value proposition for viewing or retrieving live or archived video effectively.
Invixium, a manufacturer of next-generation biometric products for enterprise access control, time and attendance and smart home markets, introduced its IXM TITAN at ISC West 2018 (booth #6109). TITAN incorporates facial recognition and fingerprint or finger vein biometric modalities into one multifunctional device capable of access control, time tracking, video surveillance and video intercom applications. “Biometric authentication is now relevant and continues to trend across many markets, rapidly becoming a mainstream solution for physical security applications,” says Shiraz Kapadia, CEO and President of Invixium. Invixium’s new TITAN solution combines highly accurate biometric technologies and diverse functionality into one exquisitely designed unit" Facial recognition algorithm “Security professionals continue to accelerate the replacement of traditional and antiquated access control methods using physical credentials with advanced biometric solutions. Invixium’s new TITAN solution – which combines highly accurate biometric technologies and diverse functionality into one exquisitely designed unit – delivers higher levels of security, is easy to deploy and implement, and provides lower total cost of ownership.” TITAN’s hallmark features include a revolutionary facial recognition algorithm based on a single 21-megapixel camera solution. With the fastest enrollment time and smallest biometric record size, TITAN delivers superior throughput, authenticating approximately 15 faces per minute with extreme accuracy and includes onboard memory to store an unprecedented 100,000 facial biometric records. Finger vein technology TITAN also incorporates Hitachi finger vein technology with liveness detection, making it virtually impossible to spoof. Vein technology provides increased privacy by eliminating latent prints and is not reproducible as vein patterns are beneath the skin. Two industry-leading fingerprint sensor options: Lumidigm Venus utilises multispectral imaging technology that virtually eliminates common real-world problems experienced by conventional fingerprint sensors. Fast, accurate and reliable, the Venus fingerprint sensor delivers best-in-class biometric authentication along with liveness detection. SecuGen U20 is an FBI certified, high-performance, maintenance-free optical fingerprint sensor resistant to scratches, impact, vibration and electrostatic shock. Additional features of TITAN include: Android Nougat Operating System A 2.2 GHz Quad-Core Qualcomm Snapdragon processor providing supreme power, graphics, reliability and battery efficiency Inbuilt RFID card reader options: iCLASS SE, MiFARE DESFire, MiFARE DESFire EV1 and 2, EM Prox A 5.0” IPS (in-plane switching) LCD for better colour reproduction and wider viewing angles An aluminium enclosure that makes it suitable for all environments including extreme heat, cold or rain. This construction is especially ideal for mines, construction sites, seaports, petro chemical and nuclear power plants Advanced connectivity options such as Gigabit Ethernet, RS485, RS232, customizable Wiegand, 3G for remote locations, Wi-Fi and Bluetooth But it doesn’t stop there. TITAN was designed to be future proof and anticipates more functionality to be added in the near term.
Hitachi, Ltd. has launched Hitachi Vantara, a new business entity to leverage the broad portfolio of innovation, development and experience from across Hitachi Group companies to deliver data-driven solutions for commercial and industrial enterprises. This new company will unify the operations of Hitachi Data Systems, Hitachi Insight Group, and Pentaho into a single integrated business as Hitachi Vantara to capitalise on Hitachi’s social innovation capability in both operational technologies (OT) and information technologies (IT). OT expertise combined with IT Hitachi has been in OT for industries such as finance, government, manufacturing, power/energy and transportation for over 100 years, providing solutions that have positively impacted cities, industrial operations and businesses at large. The company has also been prominent in IT for over 50 years—bringing IT applications, analytics, content, cloud, and infrastructure solutions to market that have transformed the way enterprises do business. Combining Hitachi’s broad expertise in OT with its proven IT product innovations and solutions, Hitachi Vantara gives customers a powerful, collaborative partner in data – unavailable in any one company until today. Monumental change “Hitachi Vantara marks a monumental change for Hitachi as we continue to advance our unified corporate vision of Social Innovation,” said Hitachi, Ltd. President and CEO Toshiaki Higashihara. “Hitachi has been helping customers harness the power of their data to support meaningful business action for years. Now as the world is being transformed by digital tools and processes, we are unifying our strongest digital solutions companies together as a new Hitachi company that delivers exponential business impact for our customers and the betterment of society. The formation of Hitachi Vantara underscores Hitachi’s commitment to collaborative creation with customers and partners, and being a true innovation partner for the era of IoT.” Opportunity in data Hitachi Vantara is uniquely able to help customers extract all the value their data has to offer. By bringing new data-driven solutions and services to market, Hitachi Vantara will help its customers achieve tangible outcomes that positively drive business and society forward. "The formation of Hitachi Vantara underscores Hitachi’s commitment to collaborative creation with customers and partners" The market opportunity for mission-critical data solutions has never been greater. Data has become a businesses’ greatest asset—if they can extract actionable insights from it. Data holds the key to new revenue streams, better customer experiences, improved market insights and lower costs of doing business. However, a comprehensive offering has yet to emerge that combines both OT and IT expertise to uncover its true potential—until now. Filling critical gap in emerging IoT market Hitachi Vantara will continue to provide superior infrastructure and analytics technologies that enterprises rely on for their mission-critical data in their data centres, in the cloud and at the edge of new innovations. The new company is targeting the emerging IoT market opportunity, in which there is no clear winner yet. According to Gartner, Inc., “more than $440 billion will be spent on IoT in 2020,” and the firm estimates that by 2020, “there will be more than 21 billion connected sensors and endpoints, and digital twins will exist for potentially billions of things.” in the same timeframe. To address this market, Hitachi Vantara will harness business, human and machine data across OT and IT environments to build comprehensive, data-driven solutions. Customers will be able to manage, store, govern, blend, analyse, and visualise data—and then take action based on uncovered insights. From data centre to factory floor Hitachi Vantara will continue to develop the trusted data management and analytics technologies Hitachi is known for, including Hitachi’s popular data infrastructure, storage and compute solutions, and Pentaho software. It will also be driving the development of strategic software and services solutions, including Hitachi Smart Data Center software and services, Lumada, Hitachi’s IoT platform, now available as a standalone, commercial software offering, and Hitachi co-creation services. "Hitachi Vantara sees dataas an opportunity—a pathto outcomes that matter" Announced concurrently today and now in its 2.0 release, Lumada has been fully updated with enhanced artificial intelligence (AI), machine learning and advanced analytics capabilities. It also has an elegant, portable architecture that enables it to run both on-premises or in the cloud, and supports industrial IoT deployments both at the edge and in the core. Meeting needs of increasingly connected world The company will focus on serving global Fortune 1000 companies with best-in-class data management, infrastructure, content and analytics products and industrial IoT solutions for a number of industries including financial services and insurance, government, industrials/manufacturing, telecom, and transportation. “No other company brings together more than a century of operational technology expertise with informational technology trusted in the world’s most demanding enterprise environments,” said Hitachi Vantara CEO, Ryuichi Otsuki. “Hitachi Vantara capitalises on this unique combination by creating solutions that meet the needs of an increasingly connected world. Like our customers with whom we partner and co-create, Hitachi Vantara sees data as an opportunity—a path to outcomes that matter.” Hitachi’s new Lumada IoT platform and Smart Data Center solutions will be on display at the Hitachi NEXT 2017 user conference in Las Vegas, September 19-20th, where event attendees can see live demonstrations of the company’s software and IoT solutions.
Manufacturing Solutions Expo (MSE) returns for a fourth edition from 25 to 27 October 2017 at the Singapore EXPO Convention & Exhibition Centre. ASEAN’s premium one-stop trade exhibition is a showcase of emerging trends, cost-effective technologies, the latest digitalised solutions, and innovative products in manufacturing. Jointly organised by the Singapore Manufacturing Federation (SMF) and Sphere Exhibits Pte Ltd, a subsidiary of Singapore Press Holdings, the annual event aims to help the manufacturing sector raise its productivity and efficiency, and remain competitive in the fast-changing and challenging business landscape. Over 4,500 trade and business professionals, and more than 120 international and regional brands from more than 25 countries are expected to attend the exhibition. A series of interactive activities will provide abundant opportunities for buyers and sellers to exchange ideas, network and explore business opportunities. MSE 2017 is supported by various government agencies and trade associations in Singapore and in the region. The three-day expo has also garnered sponsor support from the private sector including companies like LHT Holdings, HIWIN, Wah Lee Tech Singapore, Kaplan, Naina Mohamed and Sons, and Optical Gaging. SMART manufacturing is key for the industry to stay ahead of the competition Preparing for a world of digitalisation SMART manufacturing is key for the industry to stay ahead of the competition. ASEAN is poised to take the lead to capitalise on a more automated and connected region. With its demographic potential and yet-to-be-tapped market opportunities, ASEAN will be an attractive manufacturing hub, drawing investors and businesses alike. As the chairman of ASEAN in 2018, Singapore is strategically placed to host MSE 2017. In light of these developments, this year’s Expo will focus on key manufacturing technological advancements that will prepare the industry for the future of manufacturing and a world of digitalisation. Solutions that will be exhibited include Digital Factory, Industrial Automation, the brand new Surface Engineering, Sustainable Environment and Supply Chain. More than 70 companies attending include 3D Ceram, 3D MetalForge, 3M, Advantech, ARCAM, Balluff, Baumer, Buehler, CleanLoglx, Cognex, Dematic, Fleximark, Flexmove, Hioki, Hitachi, Invengo, Linde, Montrac, OGS, SESTO MSE 2017 event highlights This year, visitors can expect a carefully curated selection of activities to pique interests and spark ideas. Business Advisory Clinics Companies looking to enhance their business productivity can participate in free one-to-one business advisory sessions with industry experts from SME Centre@SMF and IP ValueLab from IPOS. Robotics Showcase CEI, HIWIN and Seimitsu will present a range of innovative solutions in the area of automation and industrial robotics which present some of the best possible solutions to today’s challenges in manufacturing. New platforms being developed to enhance productivity, profitability and time efficiencies will be shared as well. More than 30 industry leaders will be sharing the latest industry trends, best practices and various manufacturing technological solutions Machine Vision Showcase The inaugural showcase will see several companies exhibiting their solutions which include CCS, Inspiraz, JM Vision, Neuphonix Machine Vision and Vital Vision. They aim to leverage the next generation of technological methodologies from highly integrated optical components and high-speed imaging-based automatic inspection to analysis derived from robot guidance and process control for better performance on RF technologies. 3rd Edition of ManuTech Xchange More than 30 industry leaders will be sharing the latest industry trends, best practices and various manufacturing technological solutions. This year’s sessions will include two specially planned Panel Discussions on Track & Trace and Supply Chain. Presented by GS1 Singapore and Supply Chain Asia on Day 1 and 2 respectively, the discussions will provide businesses with new perspectives to help them adapt to the fast-changing industrial environment as well as introduce them to new technological trends and emerging markets. The learning sessions are excellent platforms for networking, thought leadership and industry collaborations. Co-located Conferences With the advent of Industry 4.0 where integrated computing, networking and physical processes are revolutionising manufacturing, a holistic approach is required to deal with challenges and create opportunities in manufacturing. MSE 2017 has garnered the support of the Singapore Innovation & Productivity Institute (SIPI), Singapore Surface Engineering Association (SSEA), Supply Chain Asia (SCA) and IOTSG to co-locate various industry conferences, technical symposiums and workshops alongside the exhibition. Over 600 delegates are expected to attend the co-located conferences. There will also be sharing of engaging industry insights, new business models, technologies for innovation and latest trends to help organisations learn and transform into digitalised enterprises ready for new automation in the near future. Future of Manufacturing Digital Transformation The future of companies in the manufacturing sector will depend on how well they cope with the changes in the global manufacturing landscape and the disruptions brought about by new technologies and business models. Besides embracing innovation-led productivity, companies have to transform their business model and operation through leveraging Industrial Internet-of-Things and Industry 4.0. Automation of manufacturing processes, reliance on sensors, higher level of internet connectivity and use of big data analytics will turn many operations into ‘smart’ factories that have higher productivity, greater reliability and customisation, and a higher level of customer satisfaction. Business who fail to embrace the digital transformation may risk being disrupted or made redundant. The learning sessions are excellent platforms for networking, thought leadership and industry collaborations The conference on 25 October, presented by Singapore Innovation & Productivity Institute (SIPI), will address these. Covering three topics - Developing the New Mindset & Perspective, Industrial IOT & Industrial Revolution 4.0 and Digital Transformation Plans & Solutions, it is designed for businesses and engineers keen to take advantage of advanced manufacturing technologies to streamline design and production, reduce time to market, and build more efficient products and operations as well as those in the nonmanufacturing sector who want to understand how the 4th Industrial Revolution will have an impact on their business. Surface Engineering for Research and Industrial Applications (SERIA) 2017 Organised by the Singapore Surface Engineering Association (SSEA) and Sphere Exhibits Pte Ltd, this two-day technical symposium cum industry workshop will address key topics such as Advances in Plating Technology, Plant & Equipment, and Applications, Environment and Management to help delegates understand the challenges and emerging trends, and enable them to shape the future landscape of the surface engineering industries. The Technical Symposium ‘Promote a Sustainable Future for the Surface Engineering Industry Cost-effectively’ on 26 October will see more than 10 key opinion leaders from the region sharing abstracts dealing with recent findings as well as new applications. The focus will be on commercialisation of inventions and creations as well as the impact of disruptive technology across the Surface Engineering sector. The Industry Workshop ‘Practical Surface and Interface Analysis of Industrial Coatings’ on 27 October will feature round-table discussions and hands-on analytical tools. Monetise the IoT Revolution through Disruptive Digitalised Ecosystem The one-day conference on 27 October will take an integrated approach towards Industrial IoT. Helmed by CEO of AllThingsConnected, CK Vishwakarma, the IoT journey will focus on three key aspects Technologies, Integrations and End- Users. Case-studies will be discussed and hands-on exercises provided to engage the participants.
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
Five things to consider for AI with video technologyDownload
- Synectics secures Nottingham Trent University with its enhanced surveillance solution
- Fermax secures Evelina Children’s Hospital with its DUOX system with VEO video monitors
- Fermax 2 Wire Duox system installed at an apartment complex in Nottingham
- 360 Vision Technology’s Invictus PTZ camera deployed to secure Super Bowl LIII