Vanderbilt CCTV Cameras(5)
1/3 inch, True Day / Night, 700 TVL resolution, Digital (DSP), 0.1 lux, 12 V DC, Motion Activated, 976 x 582, Back Light Compensation, Auto Gain Control, White Balance, 0.45, 1/50 ~ 1/10s, >52, Internal, PAL, CVBS (1Vp-p, 75ohm, BNC), 4 W, 63 x 53 x 129, 325, -10 ~ +50 C (14 ~ 122 F)Add to Compare
1/3 inch, True Day / Night, 700 TVL resolution, Digital (DSP), 0.1 lux, 260 V AC, Motion Activated, 976 x 582, Back Light Compensation, Auto Gain Control, 0.45, 1/50 ~ 1/10s, >52, Internal, PAL, 5 W, 63 x 53 x 129, 510, -10 ~ +50 C (14 ~ 122 F)Add to Compare
1/4 inch, Colour / Monochrome, 700 TVL resolution, Digital (DSP), 0.01 lux, 12 V DC, Motion Activated, 3.9 ~ 85.8, Back Light Compensation, Auto Gain Control, White Balance, 1/100000s, 50, Internal / Line Lock, Zoom, 1.0 Vpp (75 Ohms, composite), 72 x 66 x 121, 400, -10 ~ +50 C (14 ~ 122 F)Add to Compare
1/4 inch, Colour / Monochrome, 700 TVL TVL resolution, Digital (DSP), 0.1 lux, 12 V DC, Motion Activated, 3.9 ~ 85.8, Wide Dynamic Range, 1028 x 596, Back Light Compensation, Auto Gain Control, White Balance, 1/100.000s, 50, Internal / Line lock, Zoom, BNC connector, 120 x 152 x 283, 1,500, -30 ~ +50 C (-22 ~ +122 F), IP66Add to Compare
1/3 inch, Colour / Monochrome, 700 TVL resolution, Digital (DSP), Infrared, 0.2 lux, 12 V DC, Motion Activated, 3.3 ~ 12, Bracket, Wide Dynamic Range, 976 x 582, Back Light Compensation, Auto Gain Control, White Balance, 1/50 ~ 1/100,000s, > 52, Internal/Line-lock, PAL, VBS (1 Vpp, 75 Ohm, BNC), 7 W, 83 x 201, 680, -10 ~ +50 C (14 ~ 122 F), IP66Add to Compare
Browse CCTV Cameras
- Auto Iris
CCTV camera products updated recently
In 2017, IoT-based cyberattacks increased by 600%. As the industry moves towards the mass adoption of interconnected physical security devices, end users have found a plethora of advantages, broadening the scope of traditional video surveillance solutions beyond simple safety measures. Thanks in part to these recent advancements, our physical solutions are at a higher risk than ever before. With today’s ever evolving digital landscape and the increasing complexity of physical and cyber-attacks, it’s imperative to take specific precautions to combat these threats. Video surveillance systems Cybersecurity is not usually the first concern to come to mind When you think of a video surveillance system, cybersecurity is not usually the first concern to come to mind, since digital threats are usually thought of as separate from physical security. Unfortunately, these two are becoming increasingly intertwined as intruders continue to use inventive methods in order to access an organisation's assets. Hacks and data breaches are among the top cyber concerns, but many overlook the fact that weak cybersecurity practices can lead to physical danger as well. Organisations that deploy video surveillance devices paired with advanced analytics programs often leave themselves vulnerable to a breach without even realising it. While they may be intelligent, IoT devices are soft targets that cybercriminals and hackers can easily exploit, crippling a physical security system from the inside out. Physical security manufacturers Whether looking to simply gain access to internal data, or paralyse a system prior to a physical attack, allowing hackers easy access to surveillance systems can only end poorly. In order to stay competitive, manufacturers within the security industry are trading in their traditional analogue technology and moving towards interconnected devices. Due to this, security can no longer be solely focused on the physical elements and end users have taken note. The first step towards more secured solutions starts with physical security manufacturers choosing to make cybersecurity a priority for all products, from endpoint to edge and beyond. Gone are the days of end users underestimating the importance of reliability within their solutions. Manufacturers that choose to invest time and research into the development of cyber-hardening will be ahead of the curve and an asset to all. Wireless communication systems Integrators also become complicit in any issues that may arise in the future Aside from simply making the commitment to improve cyber hygiene, there are solid steps that manufacturers can take. One simple action is incorporating tools and features into devices that allow end users to more easily configure their cyber protection settings. Similarly, working with a third party to perform penetration testing on products can help to ensure the backend security of IoT devices. This gives customers peace of mind and manufacturers a competitive edge. While deficient cybersecurity standards can reflect poorly on manufacturers by installing vulnerable devices on a network, integrators also become complicit in any issues that may arise in the future. Just last year, ADT was forced to settle a $16 million class action lawsuit when the company installed an unencrypted wireless communication system that rendered an organisation open to hacks. Cybersecurity services In addition, we’ve all heard of the bans, taxes and tariffs the U.S. government has recently put on certain manufacturers, depending on their country of origin and cybersecurity practices. Lawsuits aside, employing proper cybersecurity standards can give integrators a competitive advantage. With the proliferation of hacks, malware, and ransomware, integrators that can ease their client's cyber-woes are already a step ahead. By choosing to work with cybersecurity-focused manufacturers who provide clients with vulnerability testing and educate end users on best practices, integrators can not only thrive but find new sources of RMR. Education, collaboration and participation are three pillars when tackling cybersecurity from all angles. For dealers and integrators who have yet to add cybersecurity services to their business portfolios, scouting out a strategic IT partner could be the answer. Unlocking countless opportunities Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step Physical security integrators who feel uncomfortable diving headfirst into the digital realm may find that strategically aligning themselves with an IT or cyber firm will unlock countless opportunities. By opening the door to a partnership with an IT-focused firm, integrators receive the benefit of cybersecurity insight on future projects and a new source of RMR through continued consulting with current customers. In exchange, the IT firm gains a new source of clients in an industry otherwise untapped. This is a win for all those involved. While manufacturers, dealers and integrators play a large part in the cybersecurity of physical systems, end users also play a crucial role. Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step. Commonplace cybersecurity standards Below is a list of commonplace cybersecurity standards that all organisations should work to implement for the protection of their own video surveillance solutions: Always keep camera firmware up to date for the latest cyber protections. Change default passwords, especially those of admins, to keep the system locked to outside users. Create different user groups with separate rights to ensure all users have only the permissions they need. Set an encryption key for surveillance recordings to safeguard footage against intruders and prevent hackers from accessing a system through a backdoor. Enable notifications, whether for error codes or storage failures, to keep up to date with all systems happenings. Create/configure an OpenVPN connection for secured remote access. Check the web server log on a regular basis to see who is accessing the system. Ensure that web crawling is forbidden to prevent images or data found on your device from being made searchable. Avoid exposing devices to the internet unless strictly necessary to reduce the risk of attacks.
Where are video surveillance cameras headed? At the core of next-generation Internet Protocol (IP) cameras are advanced chips with artificial intelligence (AI) at the edge, enabling cameras to gather valuable information about an incident: scanning shoppers at a department store, monitoring city streets, or checking on an elderly loved one at home. Thanks to advanced chip technology, complex analytics operations are becoming more affordable across the full spectrum of surveillance cameras —professional to consumer — fueling the democratisation of AI in the IP camera market. Complex analytics operations are becoming more affordable across the full spectrum of surveillance cameras Expanding the global IP camera market The video surveillance equipment market grew to $18.5 billion in 2018 and is expected to increase this year, according to IHS Markit. The latest research points to video everywhere, edge computing, and AI as the top technologies that will have a major impact in both commercial and consumer markets in 2019. Computing at the edge means that the processors inside the camera are powerful enough to run AI processing locally, while still encoding and streaming video, and are able to do it all at the low-power required to fit into the limited thermal budget of an IP camera. New SoC chips will be able to perform all of the processing on camera and provide accurate AI information, with no need to send data to a server or the cloud for processing. Instead, data can be analysed right in the camera itself, offering high performance, real-time video analytics, and lower latency — all critical aspects of video surveillance. This new AI paradigm is made possible by a new generation of SoCs, a key driver behind the market growth of IP cameras. Complex analytics operations are becoming more affordable across the full spectrum of surveillance cameras to fuel the advent of AI in the IP camera market Micro-processor-enabled video analytics Next-generation video cameras will be able to create heat maps of stores to see where people spend the most time Microprocessor-enabled analytics allow users to more easily extract valuable data from video streams. How about an insider’s view into retail customer behavior? Consider video cameras at a department store, monitoring shoppers’ behavior, traffic patterns, and areas of interest. Next-generation cameras will recognise how long a shopper stays in front of a specific display, if the shopper leaves and returns, and if the shopper ultimately makes a purchase. Next-generation video cameras will be able to create heat maps of stores to see where people spend the most time, so retailers will be able to adjust product placement accordingly. Analytics will also help identify busy/quiet times of the day, so retailers can staff accordingly. By understanding customers’ behavior, retailers can determine the best way to interact with them, target specific campaigns, and tailor ads for them. Cue the coupons while the shopper is still onsite! Analytics will also help identify busy/quiet times of the day, so retailers can staff accordingly Fast processing for rapid response at city level City surveillance and smart cities are depending on advanced video surveillance and intelligence to keep an eye on people and vehicles, identify criminals, flag suspicious behavior, and identify potentially dangerous situations such as loitering, big crowds forming, or cars driving the wrong way.Quick local decisions on the video cameras are also used to help analyse traffic situations Quick local decisions on the video cameras are also used to help analyse traffic situations, adjust traffic lights, identify license plates, automatically charge cars for parking, find a missing car across a city, or create live and accurate traffic maps. Real-time HD video monitoring and recording When it comes to home monitoring, what will next-generation video surveillance cameras offer? Real-time monitoring and notification can detect if a person is in the back yard or approaching the door, if there’s a suspicious vehicle in the driveway, or if a package is being delivered (or stolen). Advanced video cameras can determine when notifications are and aren’t required, since users don’t want to be notified for false alerts such as rain, tree branches moving, bugs, etc. Next-generation video camera capabilities can also help monitor a loved one, person or pet, helping put families at ease if they are at work or on vacation. For example, helpful analytics may be used to detect if someone has fallen, hasn’t moved for a while, or does not appear for breakfast according to their typical schedule. City surveillance and smart cities are depending on advanced video surveillance and intelligence to keep an eye on people and vehicles, identify criminals, flag suspicious behavior, and identify potentially dangerous situations Next-gen IP cameras When evaluating next-generation IP cameras (cameras on the edge), look at the brains. These cameras will likely be powered by next-generation SoCs chips. Here is what this means to you: Save on network bandwidth, cloud computing and storage costs. There is no need to constantly upload videos to a server for analysis. Analysis can be performed locally on the camera, with only relevant videos being uploaded. Faster reaction time. Decisions are made locally, with no network latency. This is critical if you need to sound an alarm on a specific event. Privacy. In the most extreme cases, no video needs to leave the camera. Only metadata needs to be sent to the cloud or server. For example, the faces of people can be recognised in the camera and acted upon, but the video never reaches the cloud. The cameras can just stream a description of the scene to the server “suspicious person with a red sweater walking in front of the train station, has been loitering for the last 10 minutes, suggest sending an agent to check it out.” This could become a requirement in some EU countries with GDPR rules. Easier search. Instead of having to look through hours of video content, the server can just store/analyse the metadata, and easily perform searches such as “find all people with a red sweater who stayed more than five minutes in front of the train station today.” Flexibility/personalisation. Each camera at the edge can be personalised to work better for the specific scene it is looking at, compared to a generic server. For example, “run a heat map algorithm on camera A (retail) as I want to know which sections of my store get the most traffic; and run a license plate recogniser on camera B (parking lot) as I want to be able to track the cars going in/out of my parking lot.” No cloud computing required. For cameras in remote locations or with limited network bandwidth, users have the ability to perform all analytics locally, without relying on uploading video to a server/cloud. Higher resolution/quality. When AI processing is performed locally, the full resolution of the sensor can be used (up to 4K or more), while typically the video streamed to a server will be lower resolution, 1080p or less. This means more pixels are available locally for the AI engine so that you will be able to detect a face from a higher distance than when the video is streamed off camera. AI at the edge Professional-level IP cameras capable of performing AI at the edge are coming soon with early offerings making their debut at this year’s ISC West. As we enter 2020, we will begin to see the availability of consumer-level cameras enabling real-time video analytics at the edge for home use. With rapid technology advancement and increased customer demand, AI is on the verge of exploding. When it comes to image quality and video analytics, IP cameras now in development will create a next-generation impact at department stores, above city streets, and keeping an eye on our loved ones.
Across the country, law enforcement officers are finding it increasingly difficult to respond to the near overwhelming number of calls coming from security alarms. Police departments commonly define a false alarm as a call, which upon investigation, shows no evidence of criminal activity, such as broken windows, forced doors, items missing, or people injured. While false alarms bog down police, they can also negatively impact customers and integrators. End users can expect hefty fines for false alarm responses, and when these customers receive large bills from the city, many turn to installers, dealers, and even manufacturers expecting them to accept the responsibility and pay the bill. What first brought the issue of alarm verification to your attention? It is crucial to both see a situation and concurrently listen to any corresponding sounds to gain full insight I’ve been aware of the problem of false alarms for about 5 years. I believed audio capture, through microphone deployment, could be an active part of the solution when used as a second source for indicating ‘out of the norm’ activity and as an equal component with the video surveillance technology. In 2015, I found similarly minded security professionals when introduced to the Partnership for Priority Verified Alarm Response. After reading PPVAR’s paper on ‘Audio Verified Alarms Best Practices; [April 2015],’ I knew that the Partnership was on to something important. In our lives, two of the five senses we count on day-in and day-out are sight and sound. It is crucial to both see a situation and concurrently listen to any corresponding sounds to gain full insight. What is the false alarm rate? In 2016, the International Association of Chiefs of Police reported that over 98 percent of all alarm calls in the United States were false. This number is obviously staggering, and something we need to work towards correcting. Why did this issue resonate so strongly with you? When I first investigated this issue, I was sure that the security industry would have already recognised this and was acting to ensure improved alarm verification, preferably through a combination of audio and video technologies. However, I quickly saw that this was not the case, or even close to the norm. I have questioned the rationale behind the lack of adoption and found the deployment of audio is often hindered by the concern of privacy. I’ve spearheaded many initiatives to explain the monitoring policies surrounding audio As CEO of Louroe Electronics, I’ve spearheaded many initiatives to explain the monitoring policies surrounding audio. I’ve had to reassure many security personnel and customers how the law supports the use of audio in public places as long as there is no expectation of privacy. By dispelling fears with facts around deploying and implementing audio sensors, customers can confidently include audio in their surveillance systems and gain a more effective security solution. Who is affected by this? Truth be told, everyone from the end user to the manufacturer is affected by this issue. Not to mention the strain this puts on law enforcement who are tired of ‘wasting time’ and effort out in the field on these nuisance alerts. When an end user receives a bill for their false alarm, many of them will immediately blame the integrator and or the monitoring center for a faulty set up and management and expect the integrator to remedy the situation, including carry the burden of paying the fines. The integrator, on the other hand, will turn to the manufacturer, assuming faulty equipment and installation instructions; therefore, looking for reimbursement for the cost. What is the average false alarm fee? It depends on many factors, and especially your first responder assigned location for responseIt depends on many factors, and especially your first responder assigned location for response. According to the Urban Institute, fees generally range from $25-$100 for the first offense, rising as high as a few thousand dollars per false alarm if a location has a large number in a single year. What’s worse, in extreme cases, alarm systems may even be blacklisted by the police dispatch center if they have raised too many false alarms in the past. Why do you believe audio is the ideal technology for secondary source verification? Video surveillance has been the main option for security monitoring and alarm validation for decades, however industry professionals are realising that video alone is not enough. Video only tells half of the story, by adding audio capture, the responsible party gains a turnkey solution with the ability to gather additional evidence to verify alerts and expand overall awareness. In reality, audio’s range is greater than the field of view for a camera. Sound pickup is 360 degrees, capturing voices, gunshots, breaking glass, sirens, or other important details that a fixed camera many not see. How would a secondary source verification system work with audio? Using a video monitoring solution equipped with audio, the microphone will pick up the sounds at the time a visual alert or alarm is triggered. If embedded with classification analytics, the microphone will send alerts for specific detected sounds. The captured audio, and any notifications are immediately sent to the monitoring station, where trained personnel can listen to the sound clip, along with live audio and video from their station. When law enforcement receives a validated alarm, they can better prioritise the response From here, an informed decision can then be made about the validity of the alarm, along with what the current threat is at the location. If the alarm is in fact valid, the information is then passed along to the law enforcement within minutes. When law enforcement receives a validated alarm, they can better prioritise the response. It also provides more information in a forensic evaluation. Are there any additional resources you would suggest looking into? Yes, we would suggest looking into the following to see a few different perspectives on the matter: NSA Support For 2018 Model Ordinance For Alarm Management and False Alarm Reduction Partnership for Priority Verified Alarm Response Support for the Term “Verified Alarm” and Prioritising Verified Alarm Responses Urban Institute Opportunities for Police Cost Savings without Sacrificing Service Quality: Reducing False Alarms
Security industry stakeholders from across the subcontinent have descended upon Mumbai for the 8th edition of Secutech India, which opens its doors today at the Bombay Exhibition Center. Taking place from 25 – 27 April, the fair offers business, networking and sourcing opportunities for India’s commercial security, smart home and fire safety sectors. In addition, plenty of educational value can be gained through the fairs fringe events, which include a fire safety training and two full days of smart city and security technology forums. Ms Regina Tsai, the Deputy General Manager of Messe Frankfurt New Era Business Media Ltd, spoke about the distinguishing features of this year’s fair: “In response to market demands, this year’s show features more exhibitors from the smart home and intelligent transportation sectors. “Exciting products gaining traction in these sectors include home surveillance systems, integrated home networks and vehicle tracking solutions. We have also refined the fringe programme to incorporate the most relevant topics for the Indian market, including smart city solutions, cyber security, and the growing role of artificial intelligence.” Altogether, 100 exhibitors representing over 400 brands are featured across 15,000 sqm of exhibition space Security products on display The ‘Make in India’ initiative has sparked a renaissance among Indian OEMs, with many domestic security and fire safety brands such as ESSL, Mantra, Biomax and AAAG represented across the show floor. In addition to the domestic companies, there is also a significant international presence. Brands Avigilon, Hikvision, Vanderbilt and Veracity, join the fair’s strong exhibitor line-up to display the latest surveillance cameras, access control systems, intrusion alarms, police equipment, and perimeter security systems for the commercial and government sectors. Altogether, 100 exhibitors representing over 400 brands are featured across 15,000 sqm of exhibition space. A highlight of the international contingent is the Shenzhen pavilion, where buyers are able to find security, smart home solutions, components, networking communication systems and peripherals. Shenzhen is one of China’s powerhubs for security manufacturers, and the attending exhibitors were carefully selected to represent a wide array of solutions for visitors seeking OEM opportunities. Smart home zone The new smart home zone features a selection of smart cameras, locks and integrated networksAnother convergence point at the fair is the new smart home zone. Featuring a selection of smart cameras, locks and integrated networks, the zone serves as a hub for suppliers to connect with property developers, architects, system integrators and other related buyers. Elsewhere, the concurrent ‘Fire and safety India’ event is a significant attraction for the fire safety fraternity. The event returns for its 4th edition this year as the destination for visitors to get hands-on with the latest fire detection and alarm systems, firefighting gear, evacuation apparatus and rescue equipment. Whether trying to penetrate the Indian market or further bolster their brand exposure, exhibitors will be aiming to connect with as many trade visitors as possible during the show. Fair organisers are anticipating a similar visitor turnout to the previous edition, which attracted 22,720 trade visitors, including distributors, system integrators, architects and consultants. Smart City Infrastructure Conference On top of being a business and networking occasion, the fair adds even more value to the visitor experience through its fringe programme of forums, seminars and events. This year’s programme is headlined by the ‘Smart City Infrastructure Conference’, which takes place on day one. A panel discussion is set to examine how smart cities will develop in India over the next five yearsAs part of the conference, a panel discussion is set to examine how smart cities will develop in India over the next five years. Other discussions analyse emergency response mechanisms and cyber security in smart cities. In addition, the ‘Security Technology Conference’ takes place on the second day of the fringe programme to explore supply-chain security in e-commerce, as well as AI and its impact on the security industry. Fire safety training to raise awareness On the final day, industry experts will gather for the highly anticipated fire safety training day. As part of the concurrent ‘Fire and Safety India’ event, and run by the State of Maharashtra Fire Service and the Mumbai Fire Brigade, the training aims to raise awareness among corporate professionals and wider society. Important topics to be addressed during the training include the common causes of fire, fire safety precautions, fire drills, evacuation procedures and safety legislation. On top of providing a platform conducive to information exchange, the fringe programme is also a hub to celebrate the achievements of India’s security and fire safety fraternity. The SECONA Shield Awards return this year to acclaim OEMs, system integrators, consultants and end users for product innovations, R&D, successful projects, unique designs and outstanding individual contributions to India’s safety and security landscape. The awards are co-organised with the Security Consultants Association of India, and the winners will be announced on the 26th April.
Access control has become a central component for the safety and security strategies of today's schools, and due to the complicated threats and challenges these facilities face, a school's access control technology must be innovative and intelligent enough to ensure comprehensive protection. The education sector is a gateway to the future for young people all over the world. But to assure this passage, schools must guarantee their students safety as well as their education. One such example of Vanderbilt solutions at work in the education sector is at a Study Abroad University in London that hosts students from the USA. Enabling campus security Live and recorded footage can be viewed remotely, and footage can be used in evidence The university wanted a security system to protect their student accommodation; in particular, a keyless system that would grant 24/7 access to its students while also enabling campus security to monitor these activities remotely. Vanderbilt’s ACT365 keeps audit trails of who is in the student accommodation by monitoring and recording fob activity. Additionally, the system produces diagnostic reports on door status and can investigate situations such as door forced, door ajar and break glass activation either locally or remotely. If an incident arises in the student accommodation, ACT365 can link events at doors through video footage so campus security can quickly identify and react. Live and recorded footage can be viewed remotely, and footage can be used in evidence. Real-time list In further protecting students’ safety, campus security can provide pin codes, access fobs, and cards to students. These credentials can be remotely enabled or disabled if required. This can be managed on desktops, laptops tablet, or smartphone device. In the event of a fire or other emergency, ACT365 automatically unlocks all doors allowing students to reach safety. The ACT365 muster report gives security campus a real-time list of all students in the campus The ACT365 muster report gives security campus a real-time list of all students in the campus accommodation building. When students exit their accommodation and swipe out, the muster report automatically updates. If someone is missing, campus security can check cameras and call them directly by clicking on their name in the dashboard. Safeguarding foundations Security in education is a crucial issue. It requires thoughtful attention and procedure while allowing room for agility, adaptability, and dependability moving forward – flagship traits of the Vanderbilt brand. Students want to attain a higher education in a safe and secure environment while enjoying their first step into varied careers. Vanderbilt’s solutions respond to these expectations and enable active safeguarding foundations to be laid.
ACRE, renowned global provider of state-of-the-art security systems, has announced that it has entered into a definitive agreement to acquire RS2 Technologies in Munster, Indiana. This purchase will enhance ACRE’s strategic expansion plans for strengthening its access control business and product portfolio. Following on from the recent acquisition of Open Options in December of 2018, ACRE continues to build its access control strength and reach in the North American market. ACRE’s portfolio now consists of Vanderbilt, Open Options, RS2 and ComNet, providing a robust offering to meet the needs across many verticals and the requirements of simple applications to very complex enterprise systems. RS2 security platform The RS2 platform was designed to easily integrate with other security system components RS2, founded in 1998, has long prided itself on the use of an open architecture platform approach in order to provide a broad product offering whilst working with a multitude of technology partners. RS2 goes the extra mile to address customer concerns and satisfy customer needs. RS2 has stayed in tune with the demands of the industry, listening to VOC from both end users and installers. The RS2 platform was designed to easily integrate with other security system components. ACRE’s CEO, Joseph Grillo, stated that this transaction continues to expand ACRE’s competitive position in a highly fragmented market with great growth potential. “The acquisition of RS2 boosts ACRE’s portfolio in the access control market and provides us one more seat at the table in a highly competitive market with many companies vying for the same work”, commented Grillo. “ACRE will continue to look for strategic opportunities to build the portfolio with complementary, albeit competitive, acquisitions.” Access control portfolio expansion “This is a great opportunity for RS2 to further expand our customer base and leverage the benefits of being a part of a broader ACRE portfolio,” said David W. Barnard, Director of Dealer Development/Partner. “We are excited to be joining the ACRE family and this will help push RS2 to the next level, and more quickly achieve our 2025 growth goals.” Financial details of the transaction were not released. The transaction is expected to close by the end of April 2019.
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
Five things to consider for AI with video technologyDownload
- Bosch safeguards Basingstoke and Deane Borough Council with its DICENTIS conference system
- Kutch manufacturing firm eliminates data spoofing with Matrix Weighbridge integration solution
- Synectics secures Nottingham Trent University with its enhanced surveillance solution
- Intelligent video analytics plays a vital role in securing power grids and substations